Operating Instructions

3. Connecting to networks
36
Connecting to VPNs
If your company or school uses a Virtual Private Network (VPN), you must configure your
unit so that you can use the VPN.
For details about configuring your unit, contact the network administrator.
1
From the Home screen > [ ] > [ ].
2
[More...] > [VPN].
3
Tap the VPN to connect to.
4
Enter the required information > [Connect].
≥ [ ] is displayed in the status bar.
1
From the Home screen > [ ] > [ ].
2
[More...] > [VPN] > [ ].
3
Configure each time as instructed by the network administrator > [Save].
Open the notifications panel > tap the notifications displayed when connected
to the VPN > [Disconnect].
Connecting to a VPN
Adding a VPN
Disconnecting from a VPN