Operating Instructions

1. Before Use
14
Charging
≥ The battery is not charged when this unit is shipped. Charge the battery before use.
Connect the unit and AC adaptor to charge.
1
Open the microUSB terminal cover, check the direction of the AC adaptor cable
terminal, and insert it into the microUSB terminal.
2
Insert the AC adaptor power plug into the power outlet.
∫ When charging is complete
1 Remove the AC adaptor power plug from the power outlet.
2 Remove the AC adaptor cable terminal from the unit.
≥ When you start charging an empty battery, the charging lamp may flash. This is not a malfunction. The charging
lamp stops flashing and lights up after the battery is charged for a while.
Charge with an AC adaptor
A To power outlet
B AC adaptor
C microUSB terminal
D Charging lamp
≥ The unit and AC adaptor may become warm while charging, however this is not a malfunction.
≥ The shape of the AC adaptor power plug and power outlet may differ depending on each country/region.
≥ Do not use any other AC adaptors except the supplied one.
≥ Do not leave any metal items (such as clips) near the contact areas of the power plug. Otherwise, a fire
and/or electric shocks may be caused by short-circuiting or the resulting heat generated.
About the charging lamp
On: Charging.
Off: Charging has completed.