Digital Imaging System Operating Instructions DP-1810F

11
Control Panel
No Contents Refer to
4
INTERRUPT Key, MEMORY IN Key, M1/M2 Keys
C Interrupt Key interrupts other copy or print jobs while making copies.
C Memory In Key registers two copy jobs for recall at a later time.
C
M1/M2 Keys are used to store a Job in Memory or to recall a Job stored in Memory.
Pages 21, 23
5
Cursor Keys
CC
CC
C Select copy ratio and function modes using (G or F).
——
6
PAPER TRAY Key
CC
CC
CUsed to select the paper tray manually.
——
7
COPY SIZE Key
C
Used to select Reduction/Enlargement only. For additional details, see page 13.
——
8
ORIGINAL SIZE Key
C
Used to select the original size manually. For additional details, see page 13.
——
9
PRINT Key
CC
CC
C When selecting the Printer ON/OFF Line.
——
NOTE
C The Control Panel displayed above shows only copier functions. Please refer
to the appropriate operating instructions for the control panel functions or in
the Panasonic Doccument Management System CD-ROM for the Printer
control panel functions.
When the machine detects a problem or an alarm status is activated, the ;
Alarm LED lights up or begins to flash.
LED Lights: Machine detected a trouble status
C No paper in the selected tray or toner has run out.
C Machine detected trouble, such as paper misfeed or jam.
LED Flashes: Machine detected an alarm status
C No paper in the tray. (Tray not selected)
C Running low on toner, etc.
Before Starting
:
COPY Key
CC
CC
C Press when using the unit as a photocopier.
——
J Add Paper
? Add Toner
I Misfeed
2 Call Service
Warning Indicators
LCD Display
;
Alarm LED (Red)
CC
CC
C Lights when trouble occurs.*
——
=
Active LED (Green)
CC
CC
C Lights when machine is active.
——