Owner manual

21
RQT9048
Advanced FeaturesAdvanced Features
Recording from a VCR or a Set top box
equipped with a Hard Drive, etc.
Connect cables while the power to both the unit and
the external device is off.
Front of the unit
Yellow White Red
You can get a
sharper, clearer
picture by
connecting with
an S Video
cable instead of
the yellow video
cable.
Audio/Video
cable
S Video cable
RAM
-R -R DL -RW(V) +R +R DL +RW
Preparation:
Turn on the unit and connected equipment.
RAM
If the disc is protected, release protection
(➔ 40).
When recording multilingual broadcasts (➔ 17)
•
•
•
Insert a disc.
to select the recording
mode (➔ 18).
1
OK
IN1
2 IN2
3DV
Input Select
e
,
r
to select “IN1” or “IN2”, then
If a program is recorded from a set top box
equipped with a Hard Drive, etc., connected
to IN1 on the rear, then select “IN1”.
Front Panel inputs are IN2.
–
–
Start play on the external device.
to start recording the
program from the external device.
Tips
If the external equipment only has a single audio output connect it
to the L/MONO (white) IN2 terminal.
To skip unwanted parts
Press [
h
PAUSE] to pause recording. (Press again to restart
recording.)
To stop recording
Press [
g
STOP].
Notes
If video is copied from another piece of equipment to this unit, then
the video quality will be degraded.
•
Recording from an External Device