Operating instructions
Feature Selection
Changing the fax activation
code
MBNM4NM1N
If you wish to use an extension telephone (page 33) to receive faxes, activate
this feature and program the activation code.
M0N “OFF”
M1N “ON” (default)
1. MMENUN A MBNM4NM1N
2. Press M1N to select “ON”. A MSETN
3. Enter your code from 2 to 4 digits, using 0-9, MGN and MBN.
R The default code is “H#9”.
4. MSETN A MMENUN
Setting the memory reception
alert
MBNM4NM4N
To alert you with a beeping sound when a received fax document is stored into
memory due to some existing problem.
M0N “OFF”: Deactivates this feature.
M1N “ON” (default): You will hear a beeping sound.
Note:
R The slow beeps will continue until you clear the printing problem and make
sure the unit is supplied with enough paper to print the stored document.
Setting friendly reception
MBNM4NM6N
To receive a fax automatically when you answer a call and hear a fax calling
tone (slow beep).
M0N “OFF”: You have to press MFAX STARTN for fax reception.
M1N “ON” (default): You do not have to press MFAX STARTN for fax reception.
Setting the auto
disconnection
MBNM4NM9N
To answer a call with an extension telephone in TEL/FAX mode (page 33), or
TAM/FAX mode (page 34) activate this feature and program the code.
M0N “OFF”
M1N “ON” (default)
1. MMENUN A MBNM4NM9N
2. Press M1N to select “ON”. A MSETN
3. Enter your code from 2 to 4 digits, using 0-9 and MGN.
R The default code is “H0”.
4. MSETN A MMENUN
Changing the greeting
message time for TAM/FAX
MBNM5NM4N
M1N “16s” (default): Maximum greeting message time is 16 seconds.
M2N “60s”: Maximum greeting message time is 60 seconds.
See page 38 for details.
Setting the scan contrast
MBNM5NM8N
To send or copy a document with faint or dark writing, set this feature before
transmission or copying.
M1N “NORMAL” (default): Used for normal writing.
M2N “LIGHT”: Used for dark writing.
M3N “DARKER”: Used for faint writing.
Copying phonebook data
from the base unit to the
cordless handset
MBNM5NM9N
M1N “1 ITEM” (default)
M2N “ALL ITEMS”
See page 52 for details.
Screening the incoming call
MBNM6NM7N
To hear an incoming call from the speaker when the answering machine is
recording the message.
M0N “OFF”
M1N “ON” (default)
45
7. Programmable Features