Operating instructions

Feature Selection
Setting the Caller ID list to
print automatically
MBNM2NM6N
M0N “OFF” (default): The Caller ID list will not be printed automatically, but the
base unit will keep a record of the information for the last 50 callers.
M1N “ON”: The Caller ID list will be printed automatically each time the base unit
logs 50 callers (page 27).
Setting the time adjustment
MBNM3NM3N
Using this feature, the unit’s date and time setting will be automatically adjusted
when Caller information is received.
M1N “AUTO” (default): The date and time setting will be automatically adjusted.
M2N “MANUAL”: Deactivates this feature.
Setting the quick scan
MBNM3NM4N
This feature is helpful when you want to remove the document for other uses,
because the unit will release the document before sending or copying.
M0N “OFF” (default): Deactivates this feature.
M1N “ON”: The unit will scan the document and store it into memory first, then
the unit will start sending or copying the documents.
Note:
R If the document exceeds the memory capacity, sending of the whole
document or copying of the exceeded document will be cancelled and this
feature will be turned OFF automatically.
Receiving oversized
documents
MBNM3NM6N
If the size of the document sent by the other party is as large as or larger than
the recording paper, the unit can reduce the document and print it. Select the
desired reduction rate.
M1N “72%”
M2N “86%”
M3N “92%” (default)
M4N “100%”
Setting
Recording paper
size
Original document
size
“100%” A4 Letter
“92%” (default) A4 A4
“86%” A4 A4
“72%” A4 Legal
Note:
R The actual printing percentage may vary slightly depending on the type of
recording paper, or other usage environment of the sending/receiving
machines.
R The information of the sending party is printed on the top of each page.
Therefore, even if the original document is the same size as the recording
paper, the document will be divided into 2 sheets when printed at “100%”.
Select “92%” to print on 1 sheet.
Changing the LCD display
contrast
*1
MBNM3NM9N
M1N “NORMAL” (default)
M2N “DARKER”
44
7. Programmable Features