Operating Instructions

2. Getting Started – Charging the Battery

 Removing the Battery

1 Set the camera on/off switch to [OFF].

2 Open the battery door.

• Check that the card access light turned off and then open the battery door.

(Card Access Indications: 61)

3 Push the lever (A) in the direction of the arrow and then remove the battery.

• Ensure that no foreign objects are adhering to the inner side (rubber seal) of the

battery door.

• Remove the battery after use.

(The battery will drain if left inserted in the camera for a long period of time.)

• The battery becomes warm after use, during charging, and immediately after

charging.

The camera also becomes warm during use. This is not a malfunction.

• Be careful when removing the battery as the battery will jump out.

(A)