Operating Instructions Digital Camera Model No. DC-GH5M2 Please read these instructions carefully before using this product. A firmware update has been made available to improve camera capabilities and to add functionality. • For information about functions that have been added or modified, refer to the pages for “Firmware Update”.
About Operating Instructions This document, “Operating Instructions ”, includes detailed explanations of all the functions and operations of the camera.
About Operating Instructions Display on a smartphone Example: Display in English (C) (F) (A) (B) (E) (D) (A) Search field Enter the term to search for and press [ ]. By entering multiple search terms separated by spaces, you can find pages that include all of the search terms you entered. No distinction is made between upper and lower case or between single- and double-byte characters. (B) ‘Contents’ Description pages open when you press headings. Use [ ]/[ ] to open and collapse the ‘Contents’.
About Operating Instructions (F) ‘Show Contents’ button/‘Close Contents’ button When displaying on a smartphone, press [ Press [ ] to display the ‘Contents’. ] to exit ‘Contents’. Symbols Used in This Document Black icons show conditions in which these can be used, and gray icons show conditions in which these cannot be used.
About Operating Instructions (A) Front dial (B) Rear dial Cursor button up/down/left/right (C) 3421 or Joystick up/down/left/right (D) Press the center of the joystick (E) [MENU/SET] button (F) Control dial • Other symbols, such as icons shown on the camera screen, are also used in explanations. • This document describes the procedure for selecting menu items as follows: Example: Set the [Picture Quality] of the [Photo] ([Image Quality]) menu [ ][ ] [Picture Quality] Select [STD.
Contents About Operating Instructions 2 1. Introduction 18 Before Use.................................................................................19 Standard Accessories................................................................22 Lenses That Can Be Used.........................................................25 Memory Cards That Can Be Used.............................................26 Names of Parts ..........................................................................29 Camera..........
Contents 3. Basic Operations 75 Basic Recording Operations ......................................................76 How to Hold the Camera ................................................................... 76 Recording .......................................................................................... 78 Selecting the Recording Mode .......................................................... 80 Camera Setting Operations .......................................................
Contents 5. Focus/Zoom 125 Selecting the Focus Mode .......................................................126 Using AF ..................................................................................128 [AF Custom Setting(Photo)] ............................................................ 133 Selecting the AF Mode ............................................................136 [Human Detect AF]/[Human/Animal Detect AF] .............................. 139 [Tracking]....................................
Contents Post-Focus Recording .............................................................208 Selecting the Focus Point for the Picture to Save ........................... 212 Focus Stacking ................................................................................ 214 Recording with Time Lapse Shot.............................................217 Recording with Stop Motion Animation....................................222 Time Lapse Shot/Stop Motion Animation Videos ....................
Contents [Filter Settings].........................................................................294 [Simultaneous Record w/o Filter]..................................................... 303 9. Flash 304 Using an External Flash (Optional)..........................................305 Removing the Hot Shoe Cover........................................................ 306 Setting Flash............................................................................309 [Flash Mode]............................
Contents Video Brightness and Coloring ................................................357 [Luminance Level] ........................................................................... 358 [Master Pedestal Level]................................................................... 359 Recording While Controlling Overexposure (Knee)......................... 361 [ISO Sensitivity (video)] ................................................................... 363 Audio Settings.....................................
Contents 6K/4K Anamorphic (4:3) video ........................................................ 407 [Anamorphic Desqueeze Display] ................................................... 408 [Synchro Scan] ........................................................................411 [Loop Recording (video)] .........................................................413 [Segmented File Recording] ....................................................
Contents Enlarged Display ............................................................................. 451 Thumbnail Screen ........................................................................... 453 Calendar Playback .......................................................................... 455 Group Images ..........................................................................457 Deleting Images.......................................................................459 [RAW Processing]...........
Contents [Photo] Menu ...........................................................................519 [Photo] menu ([Image Quality]) ....................................................... 519 [Photo] menu ([Focus]).................................................................... 524 [Photo] menu ([Flash]) ..................................................................... 526 [Photo] menu ([Others (Photo)]) ...................................................... 529 [Video] Menu.......................
Contents [Playback] menu ([Others]).............................................................. 609 Entering Characters.................................................................610 15. Wi-Fi/Bluetooth 611 Connecting to a Smartphone ...................................................613 Flow of connecting a smartphone ................................................... 613 Installing “LUMIX Sync” ..................................................................
Contents 16. Streaming Function 677 Stream by Operating a Smartphone ........................................678 Stream by Operating the Camera............................................680 Streaming Settings ..................................................................683 Notes When Using the Streaming Function .................................... 687 17. Connecting to Other Devices 689 Viewing on a TV.......................................................................
Contents Recording ........................................................................................ 738 Video ............................................................................................... 743 Playback .......................................................................................... 744 Monitor/Viewfinder........................................................................... 745 Flash......................................................................................
1.
1. Introduction – Before Use Before Use Firmware of Your Camera/Lens Firmware updates may be provided in order to improve camera capabilities or to add functionality. Make sure that the firmware of the camera/lens you purchased is the latest version. We recommend using the latest firmware version. • To check the firmware version of the camera/lens, attach the lens to the camera and select [Firmware Version] in the [Setup] ([Others]) menu. You can also update the firmware in [Firmware Version].
1. Introduction – Before Use Splash Resistant Splash Resistant is a term used to describe an extra level of protection this camera offers against exposure to a minimal amount of moisture, water or dust. Splash Resistant does not guarantee that damage will not occur if this camera is subjected to direct contact with water.
1. Introduction – Before Use Be Careful with Regard to Copyrights Under copyright law, you may not use the images and audio you have recorded for other than personal enjoyment without the permission of the copyright holder. Be careful because there are cases where restrictions apply to recording even for the purpose of personal enjoyment.
1. Introduction – Standard Accessories Standard Accessories Check that all the accessories are supplied before using the camera. • The accessories and their shape will differ depending on the country or area where the camera was purchased. For details on the accessories, refer to “Operating Instructions ” (supplied). • Digital camera body (This is referred to as camera in this document.) • Battery pack (This is referred to as battery pack or battery in this document.
1. Introduction – Standard Accessories Items Supplied with DC-GH5M2L (Lens Kit Product) • Interchangeable lens*2: H-ES12060 “LEICA DG VARIO-ELMARIT 12–60mm/F2.8–4.0 ASPH./POWER O.I.S.” – This lens is dust and splash resistant. – The recommended operating temperature is from j10 °C to 40 °C (14 oF to 104 oF). • Lens hood • Lens cap*3 • Lens rear cap*3 Items Supplied with DC-GH5M2M (Lens Kit Product) • Interchangeable lens*2: H-FS12060 “LUMIX G VARIO 12–60mm/F3.5–5.6 ASPH./POWER O.I.S.
1. Introduction – Standard Accessories For United Kingdom and Ireland customers (Sales and Support Information) Customer Communications Centre • For customers within the U.K.: 0344 844 3899 • For customers within Ireland: 01 289 8333 • Monday – Friday 9:00 am – 5:00 pm (Excluding public holidays). • For further support on your product, please visit our website: www.panasonic.co.uk Direct Sales at Panasonic U.K.
1. Introduction – Lenses That Can Be Used Lenses That Can Be Used This unit can use the dedicated lenses compatible with the Micro Four ThirdsTM System lens mount specification (Micro Four Thirds mount). You can also use the Leica M Mount interchangeable lens by attaching the M Mount Adaptor (DMW-MA2M: optional). About the lens and functions Depending on the lens used, certain functions, such as Auto Focus, Image Stabilizer, and zoom functions, may be disabled or operate differently.
1. Introduction – Memory Cards That Can Be Used Memory Cards That Can Be Used You can use the following memory cards with this camera. (As of May 2021) SD memory card/SDHC memory card/SDXC memory card (Maximum 256 GB) • SD memory card, SDHC memory card, and SDXC memory card are referred to by the generic name of card in this document. • This camera supports cards compliant with UHS Speed Class 3 of the UHS-I/ UHS-II standard and Video Speed Class 90 of the UHS-II standard.
1. Introduction – Memory Cards That Can Be Used • When using the following functions, use cards that have the correct SD Speed Class, UHS Speed Class, and Video Speed Class. – Speed classes are standards to guarantee the minimum speed necessary for continuous writing.
1. Introduction – Memory Cards That Can Be Used • You can prevent the writing and deleting of data by setting the write-protect switch (A) on the card to “LOCK”. • The data stored on a card may be damaged due to electromagnetic waves, static electricity or a failure of the camera or card. We recommend backing up important data. • Keep the memory card out of reach of children to prevent swallowing.
1.
1. Introduction – Names of Parts (1) Stereo microphone ([Sound Rec Level Adj.]: 367) • Do not block the microphone with a finger. Audio will be difficult to record. (2) Drive mode dial (Selecting the Drive Mode: 183) (3) Hot shoe (hot shoe cover) (Removing the Hot Shoe Cover: 306) • Keep the hot shoe cover out of reach of children to prevent swallowing.
1.
1.
1. Introduction – Names of Parts (30) Eye cup (Cleaning the Viewfinder: 754) • Keep the eye cup out of reach of children to prevent swallowing.
1. Introduction – Names of Parts (43) DC Coupler cover (AC Adaptor (Optional)/DC Coupler (Optional): 714) • When using an AC adaptor, ensure that the Panasonic DC Coupler (DMW-DCC17: optional) and AC Adaptor (DMW-AC10: optional) are used. • Always use a genuine Panasonic AC Adaptor (DMW-AC10: optional). • When using an AC Adaptor (optional), use the AC mains lead supplied with the AC Adaptor (optional).
1.
1. Introduction – Names of Parts (56) Headphone socket (Headphones: 442) • Excessive sound pressure from earphones and headphones can cause hearing loss.
1. Introduction – Names of Parts Lens H-ES12060 H-FS12060 (1) Lens surface (2) Tele (3) Focus ring (Adjust the focus.: 170) (4) Zoom ring (Recording with Zoom: 175) (5) Wide (6) O.I.S. switch (7) [AF/MF] switch • When either the [AF/MF] switch of the lens or the setting of the camera is set to [MF], Manual Focus (MF) is enabled.
1.
1. Introduction – Names of Parts Viewfinder/Monitor Displays At the time of purchase, the viewfinder/monitor displays the following icons. • For information about the icons other than those described here (Monitor/ Viewfinder Displays: 715) Viewfinder 60 F3.5 999 200 Monitor 60 F3.
1.
2.
2. Getting Started – Attaching a Shoulder Strap Attaching a Shoulder Strap Attach a shoulder strap to the camera with the following procedure to prevent it from dropping.
2. Getting Started – Attaching a Shoulder Strap 3 4 • Pull the shoulder strap and check that it will not come out. • Attach the opposite end of the shoulder strap with the same procedure. • Use the shoulder strap around your shoulder. – Do not wrap the strap around your neck. It may result in injury or accident. • Do not leave the shoulder strap where an infant can reach it. – It may result in an accident by mistakenly wrapping around the neck.
2. Getting Started – Charging the Battery Charging the Battery ≥ Charging with the Charger: 45 ≥ Battery Insertion: 48 ≥ Inserting a Battery into the Camera for Charging: 50 ≥ Using the Camera While Supplying It with Power (Supplying Power/ Charging): 54 ≥ Notifications Regarding Charging/Power Supply: 56 ≥ [Power Save Mode]: 58 You can charge the battery either using the supplied charger, or in the camera body. You can also turn on the camera and supply power from an electrical outlet.
2. Getting Started – Charging the Battery Charging with the Charger Charging time: Approx. 230 min • Use the supplied charger and AC adaptor. • The indicated charging time is for when the battery has been discharged completely. The charging time may vary depending on how the battery has been used. The charging time for the battery in hot/cold environments or a battery that has not been used for a long time may be longer than normal. • Use the products supplied with the camera for charging.
2. Getting Started – Charging the Battery 1 Connect the charger and the AC adaptor with the USB connection cable. • Check the direction of the terminals and plug in/out straight holding onto the plug. 2 3 (Inserting at an angle can deform the terminal and cause malfunction.) Connect the AC adaptor to an electrical outlet. Insert the battery. ≥The [CHARGE] light (A) blinks and charging begins. • Do not use any other USB connection cables except the supplied one. This may cause malfunction.
2. Getting Started – Charging the Battery [CHARGE] Light Indications Charging status 0 % to 49 % 50 % to 79 % 80 % to 99 % 100 % (B) (A) (C) [CHARGE] light (A) (B) (A) (A) Blinking (B) On (C) Off • When the battery is inserted while the charger is not connected to the power source, the charging lights turn on for a certain period to allow you to confirm the battery level. • After charging, disconnect the power source connection and remove the battery.
2. Getting Started – Charging the Battery Battery Insertion • Always use genuine Panasonic batteries (DMW-BLK22/DMW-BLF19). – DMW-BLF19 (optional) has a smaller battery capacity than DMW-BLK22. • If you use other batteries, we cannot guarantee the quality of this product. • Check that this unit is turned off. 1 2 (A) 3 • Check that the lever (A) is holding the battery in place.
2. Getting Started – Charging the Battery Removing the Battery (A) 1 Set the camera on/off switch to [OFF]. 2 Open the battery door. • Check that the card access light turned off and then open the battery door. (Card Access Indications: 61) 3 Push the lever (A) in the direction of the arrow and then remove the battery. • Ensure that no foreign objects are adhering to the inner side (rubber seal) of the battery door. • Remove the battery after use.
2. Getting Started – Charging the Battery Inserting a Battery into the Camera for Charging Charging time: Approx. 220 min • Using the camera body and the supplied AC adaptor. • The indicated charging time is for when the battery has been discharged completely. The charging time may vary depending on how the battery has been used. The charging time for the battery in hot/cold environments or a battery that has not been used for a long time may be longer than normal.
2. Getting Started – Charging the Battery (A) 1 3 4 2 1 Set the camera on/off switch to [OFF]. 2 Insert the battery into the camera. 3 Connect the camera USB port and the AC adaptor using the USB connection cable. • Check the direction of the terminals and plug in/out straight holding onto the plug. 4 (Inserting at an angle can deform the terminal and cause malfunction.) Connect the AC adaptor to an electrical outlet. • The charging light (A) blinks red and charging begins.
2. Getting Started – Charging the Battery • You can also charge the battery by connecting a USB device (PC, etc.) and the camera with the USB connection cable. In that case, charging may take a while. • Do not use any other USB connection cables except the supplied USB connection cables. This may cause malfunction. • Do not use any other AC adaptors except the supplied one. This may cause malfunction. • After charging, disconnect the connection to the power source.
2. Getting Started – Charging the Battery Power Supply When a battery is inserted in the camera then charged with the AC adaptor (supplied), and the camera is turned on, you can record while supplying power. •[ ] is displayed in the screen while power is being supplied. • You can also supply power by using a USB connection cable to connect the camera and a USB device (PC, etc.). • The battery cannot be charged while power is being supplied.
2. Getting Started – Charging the Battery Using the Camera While Supplying It with Power (Supplying Power/Charging) Since this camera and the items supplied with the battery charger (DMW-BTC15: optional) are compatible with USB PD (USB Power Delivery), you can charge while the camera is being supplied with power. Connect the USB connection cable, AC adapter and AC mains lead of the battery charger (DMW-BTC15: optional) to the camera. Charging time: Approx.
2. Getting Started – Charging the Battery • Insert the battery into the camera. • Connect using the USB connection cable of the battery charger (DMW-BTC15: optional). • When the camera is on, charging will take longer than when the camera is off. • Even when connecting with devices that support USB PD, you may not be able to charge while using the camera. • If connecting with devices (PC, etc.) that do not support USB PD and turning the camera on, then this will supply power only.
2. Getting Started – Charging the Battery Notifications Regarding Charging/Power Supply Power Indications (A) (B) (C) (A) USB connection cable supplying power (B) Battery indication (C) Using the battery in the Battery Grip 75 % or higher 50 % to 74 % 25 % to 49 % 24 % or below Low battery (The status indicator also blinks.) Blinking in red • Charge or replace the battery. • The battery level indicated on the screen is approximate.
2. Getting Started – Charging the Battery • To ensure that safe products are used, we recommend that a genuine Panasonic battery pack is used. There is a possibility that other battery packs may lead to fire or explosion. Please be advised that we are not liable for any accident or failure occurring as a result of use of a counterfeit battery pack. • Do not leave any metal items (such as clips) near the contact areas of the power plug.
2. Getting Started – Charging the Battery [Power Save Mode] This is a function to automatically turn the camera to sleep (power save) status or turn off the viewfinder/monitor if no operation is performed for a set time. Reduces battery consumption. [ ][ [Sleep Mode] [Sleep Mode(Wi-Fi)] [Auto LVF/ Monitor Off] ] Select [Power Save Mode] Sets the amount of time until the camera is put to sleep. Sets the camera to sleep 15 minutes after being disconnected from Wi-Fi.
2. Getting Started – Charging the Battery • To recover from [Sleep Mode], [Sleep Mode(Wi-Fi)], or [Power Save LVF Shooting], perform one of the following operations: – Press the shutter button halfway. – Set the camera on/off switch to [OFF] and then [ON] again. • To recover from [Auto LVF/Monitor Off], press any button.
2. Getting Started – Inserting Cards (Optional) Inserting Cards (Optional) ≥ Formatting Cards (Initialization): 63 This camera supports the double card slot function. When two cards are used, relay recording, backup recording, and allocation recording are available. 1 2 (A)A (B) (A) Card slot 1 (B) Card slot 2 3 • Match the orientation of the cards as shown in the figure and then insert them firmly until they click.
2. Getting Started – Inserting Cards (Optional) • You can set the way to record to card slots 1 and 2: [ ][ ] [Double Card Slot Function] ([Double Card Slot Function]: 119) Card Access Indications The card access light (C) turns on while the card is being accessed. (C) • Do not perform the following operations during access. The camera may operate incorrectly or the card and recorded images may be damaged. – Turn off the camera. – Remove the battery or card or disconnect the power plug.
2. Getting Started – Inserting Cards (Optional) Removing a Card 1 Open the card door. 2 Push the card until it clicks and then pull the card out straight. • The card may be warm just after the camera has been used.
2. Getting Started – Inserting Cards (Optional) Formatting Cards (Initialization) Format the cards with the camera before use in order to ensure optimal card performance. • When a card is formatted, all of the data stored in the card is erased and cannot be restored. Save a backup of necessary data before formatting the card. [ ][ ] Select [Card Format] Settings: [Card Slot 1]/[Card Slot 2] • Do not turn off the camera or perform another operation during formatting.
2. Getting Started – Attaching a Lens Attaching a Lens ≥ Attaching a Lens Hood: 67 • Check that the camera on/off switch is set to [OFF]. • Change the lens in a location where there is not a lot of dirt and dust. If dirt or dust gets on the lens (Dirt on the Image Sensor: 753) • Change the lens while the lens cap is attached.
2. Getting Started – Attaching a Lens 3 (A) (A) Lens fitting mark • When you have attached a lens that does not have a communication function with this camera, after turning on the camera, a message asking for confirmation of the lens information is displayed. You can register the focal length for the lens when you select [Yes]. ([Lens Information]: 250) • Insert the lens straight in. Inserting this at an angle to attach it may damage the camera lens mount.
2. Getting Started – Attaching a Lens Removing a Lens 1 While pressing the lens release button (B), rotate the lens in the direction of the arrow until it stops and then remove it. (B) • After removing the lens, be sure to attach the body cap and the lens rear cap.
2. Getting Started – Attaching a Lens Attaching a Lens Hood For recording against strong backlight, a lens hood can reduce the inclusion of unwanted light in images and drop in contrast resulting from the irregular reflection of light that occurs within the lens. It allows you take more beautiful pictures by cutting out excess light. When attaching the lens hood (flower shape) supplied with the interchangeable lens (H-ES12060/H-FS12060) Hold the lens hood by placing your fingers as shown in the figure.
2. Getting Started – Attaching a Lens 1 Align mark (A) ( ) on the lens hood with the mark on the tip of the lens. (A) 2 Rotate the lens hood in the direction of the arrow to align mark (B) ( ) on the lens hood with the mark on the tip of the lens. ≥Attach the lens hood by rotating it until it clicks.
2. Getting Started – Attaching a Lens Removing the Lens Hood (H-ES12060) 1 While pressing the lens hood button (C), rotate the lens hood in the direction of the arrow and then remove it. (C) When carrying the camera • The lens hood can be attached in the reverse direction. Example: H-ES12060 1 Align mark (B) ( 2 Attach the lens hood by rotating it in the direction of the arrow until it clicks. ) on the lens hood with the mark on the tip of the lens.
2. Getting Started – Adjusting the Monitor Direction and Angle Adjusting the Monitor Direction and Angle At the time of purchase, the monitor is stowed in the camera body. 1 2 3 • The angles of adjustment are guides only. • Do not apply an excessive force to the monitor. This may cause damage or malfunction. • When not using the camera, close the monitor with the monitor surface facing in.
2. Getting Started – Setting the Clock (When Turning On for the First Time) Setting the Clock (When Turning On for the First Time) ≥ Clock Set: 71 When you turn the camera on for the first time, a screen to set the time zone and clock appears. Be sure to set these settings before use to ensure images are recorded with the correct date and time information. Clock Set 1 Set the camera on/off switch to [ON]. ≥When the camera is turned on, the status indicator lights up.
2. Getting Started – Setting the Clock (When Turning On for the First Time) 5 Set the time zone. ≥Press 21 to select the time zone and then press • If you are using Daylight Savings [ or . ], press 3. (The time will move forward by 1 hour.) To return to the normal time, press 3 again. (A) 6 (A) Time difference from GMT (Greenwich Mean Time) When [Please set the clock] appears, press 72 or .
2. Getting Started – Setting the Clock (When Turning On for the First Time) 7 Set the clock. 21: Select an item (year, month, day, hour, minute, or second). 34: Select a value. To set the display order (B) and time display format (C) ≥Press 21 to select the time zone [Style] and then press or , the screen for setting the display order and time display format appears.
2. Getting Started – Setting the Clock (When Turning On for the First Time) 8 Confirm your selection. ≥Press 9 or . When [The clock setting has been completed.] appears, press or . • If the camera is used without setting the clock, it will be set to “0:00:00 1/1/2021”. • Clock settings are maintained for approx. 3 months using the built-in clock battery even without the battery. (Leave the fully-charged battery in the camera for approx. 24 hours to charge the built-in battery.
3.
3. Basic Operations – Basic Recording Operations Basic Recording Operations ≥ How to Hold the Camera: 76 ≥ Recording: 78 ≥ Selecting the Recording Mode: 80 How to Hold the Camera To minimize camera shake, hold the camera so that it will not move during recording. Hold the camera with both hands, keep your arms still at your side, and stand with your feet shoulder width apart. ≥ Hold the camera firmly by wrapping your right hand around the camera grip. ≥ Support the lens from below with your left hand.
3. Basic Operations – Basic Recording Operations Vertical Orientation Detection Function This function detects when pictures were recorded with the camera held vertically orientated. With the default settings, pictures are automatically played back vertically oriented. • If you set [Rotate Disp.] to [OFF], pictures will be played back without being rotated. ([Rotate Disp.]: 601) • When the camera is tilted significantly up or down, the vertical orientation detection function may not work correctly.
3. Basic Operations – Basic Recording Operations Recording 1 Adjust the focus. ≥Press the shutter button halfway (press it gently). ≥The aperture value (A) and shutter speed (B) are displayed. (When the correct exposure cannot be obtained, the indications blink in red.) ≥Once the subject is in focus, the focus icon (C) lights. (When the subject is not in focus, the indication blinks.) • You can also perform the same operation by pressing [AF ON]. 60 (C) F3.
3. Basic Operations – Basic Recording Operations 2 Start recording. ≥Press the shutter button fully (press it further). ≥When recording videos, press the video rec. button. (10. Recording Videos: 325) • Recorded pictures can be displayed automatically by setting [Auto Review] of the [Custom] ([Monitor / Display (Photo)]) menu. You can also change the picture display duration to your preferred setting.
3. Basic Operations – Basic Recording Operations Selecting the Recording Mode 1 Press the mode dial lock button (1) to release the lock. 2 Rotate the mode dial (2) and adjust the recording mode. • The dial is locked if the mode dial lock button is depressed. Each press locks/unlocks the dial.
3. Basic Operations – Camera Setting Operations Camera Setting Operations When changing the camera settings, operate the camera using the following operation parts.
3. Basic Operations – Camera Setting Operations Front Dial/Rear Dial Rotate: Selects an item or numeric value. Control Dial Rotate: Selects an item or numeric value.
3. Basic Operations – Camera Setting Operations Cursor Buttons Press: Selects an item or numeric value. [MENU/SET] Button Press: Confirms a setting. • Displays the menu during recording and playback.
3. Basic Operations – Camera Setting Operations Joystick The joystick can be operated in 4 directions by tilting it up, down, left and right and by pressing the center part. (B) (A) (A) Tilt: Selects an item or numeric value, or moves a position. • Place your finger on the center of the joystick before tilting. The joystick may not work as expected when the sides are pressed. (B) Press: Confirms a setting.
3. Basic Operations – Camera Setting Operations Touch Screen Operations can be performed by touching the icons, slide bars, menus, and other items displayed on the screen. (A) (B) (C) (A) Touch Operation of touching and then lifting your finger from the touch screen. (B) Drag Operation of moving a finger while it touches the touch screen.
3. Basic Operations – Monitor/Viewfinder Display Settings Monitor/Viewfinder Display Settings ≥ Setting the Viewfinder: 86 ≥ Switching Between the Monitor and Viewfinder: 87 ≥ Switching the Display Information: 89 Setting the Viewfinder Adjusting the Viewfinder Diopter 1 Rotate the diopter adjustment dial while looking through the viewfinder. • Adjust until you can clearly see the text on the viewfinder.
3. Basic Operations – Monitor/Viewfinder Display Settings Switching Between the Monitor and Viewfinder With the default settings, automatic viewfinder/monitor switching is set. When you look through the viewfinder, the eye sensor (A) works and the camera switches from monitor display to viewfinder display. You can switch to viewfinder display or monitor display with [LVF] button (B). 1 Press [LVF].
3. Basic Operations – Monitor/Viewfinder Display Settings • The eye sensor may not work correctly due to the shape of eyeglasses, the way the camera is held, or bright light shining around the eyepiece. • During video playback or slide show, automatic viewfinder/monitor switching does not work.
3. Basic Operations – Monitor/Viewfinder Display Settings Switching the Display Information 1 Press [DISP.]. ≥The display information is switched.
3. Basic Operations – Monitor/Viewfinder Display Settings Viewfinder (E) (F) 999 (E) With information (F) Without information • Press [ ] to switch between display/hide of the level gauge. This can also be set by using [Level Gauge].
3. Basic Operations – Monitor/Viewfinder Display Settings Playback Screen (H) (G) 2022.12.1 10:00 100-0001 1/999 (I) AFS 4:3 L ISO 60 200 0 STD. (J) 1/5 FINE sRGB AWB F3.5 2022.12. 1 10:00 60 F3.5 ±0 ISO200 100-0001 (G) With information (H) Detailed information display*1 (I) Without information (J) Display without blinking highlights*2 *1 Pressing 34 switches the display information.
3. Basic Operations – Quick Menu Quick Menu This menu enables you to quickly set functions that are frequently used during recording without calling up the menu screen. You can also change the Quick menu display method and the items to display. 1 Display the Quick menu. 2 Select a menu item. ≥Press [Q]. ≥Press 3421. ≥Selection is also possible by rotating . ≥Selection is also possible by touching a menu item.
3. Basic Operations – Quick Menu 3 Select a setting item. 4 Close the Quick menu. ≥Rotate or . ≥Selection is also possible by touching a setting item. ≥Press the shutter button halfway. ≥You can also close the menu by pressing [Q]. • Some items cannot be set depending on the recording mode or camera settings. • The Quick menu can be customized: [ ][ ] [Q.
3. Basic Operations – Control Panel Control Panel This screen allows you to view the current recording settings on the monitor. You can also touch the screen to change the settings. In the [ ] mode (Creative Video mode), the display changes to one especially for video. (Control Panel (Creative Video mode): 726) 1 Display the control panel. 2 Touch the items. 3 ≥Press [DISP.] several times. ≥The setting screens for each of the items are displayed. Change the setting.
3. Basic Operations – Control Panel 4 Touch [Set]. Steps 2 to 4 can also be changed using the following operations. 1 Press 3421 to select an item. 2 Rotate • Selection is also possible by rotating or . to change the settings values. • Some items cannot be set depending on the recording mode or camera settings.
3. Basic Operations – Menu Operation Methods Menu Operation Methods ≥ Menu operation: 96 ≥ [Reset]: 101 In this camera, the menu is used for setting a wide variety of functions and performing camera customizations. Menu operations can be performed using the cursors, joystick, dial, or by touch. Menu operation Configuration and operation parts of the menu The menu can be operated by pressing 21 to move between menu screens.
3. Basic Operations – Menu Operation Methods 1 Display the menu. 2 Select a main tab. ≥Press . ≥Press 34 to select a main tab and then press 1. ≥You can also perform the same operation by rotating the main tab and then pressing or .
3. Basic Operations – Menu Operation Methods 3 Select a sub tab. ≥Press 34 to select a sub tab and then press 1. ≥You can also perform the same operation by rotating the sub tab and then pressing or . to select • If there are page tabs (F), then after the page tabs have finished switching, the next sub tab is switched to. (F) 4 Select a menu item. ≥Press 34 to select a menu item and then press 1. ≥You can also perform the same operation by rotating the menu item and then pressing or .
3. Basic Operations – Menu Operation Methods 5 Select a setting item and then confirm your selection. 6 Close the menu. ≥Press 34 to select a setting item and then press ≥You can also perform the same operation by rotating the setting item and then pressing or . ≥Press the shutter button halfway. ≥You can also close the menu by pressing [ or . to select ] several times. • For details about menu items, refer to Menu Guide. (14.
3. Basic Operations – Menu Operation Methods Displaying Descriptions About Menu Items and Settings If you press [DISP.] while a menu item or setting item is selected, a description about the item is displayed on the screen. Grayed Out Menu Items Menu items that cannot be set are displayed grayed out. If you press or while a grayed out menu item is selected, the reason why it cannot be set is displayed. The reason why a menu item cannot be set may not be displayed depending on the menu item.
3. Basic Operations – Menu Operation Methods [Reset] Return each of the following settings to the default setting: • Recording settings • Network settings (settings of [Wi-Fi Setup], [Streaming Setup] and [Bluetooth]) • Setup and custom settings (other than [Wi-Fi Setup], [Streaming Setup] and [Bluetooth]) [ ][ ] Select [Reset] • If the setup and custom settings are reset, the [Playback] menu is also reset.
3. Basic Operations – Intelligent Auto Mode Intelligent Auto Mode The [iA] mode (Intelligent Auto mode) can record images using settings automatically selected by the camera. The camera detects the scene to set the optimal recording settings automatically to match the subject and recording conditions. 1 Set the mode dial to [iA]. 2 Aim the camera at the subject. ≥When the camera detects the scene, the recording mode icon changes.
3. Basic Operations – Intelligent Auto Mode 3 Adjust the focus. ≥Press the shutter button halfway. ≥Once the subject is in focus, the focus icon lights. (When the subject is not in focus, the indication blinks.) • [ ] of the AF mode works and the AF area is displayed aligned to any humans. 4 Start recording. ≥Press the shutter button fully. • Backlight compensation operates automatically to prevent subjects from appearing dark when there is a backlight.
3.
3.
3. Basic Operations – Intelligent Auto Mode : *1 Detected when animal detection is enabled. *2 Detected when using an external flash. • If none of the scenes are applicable, recording is with [ ] (standard setting). • Different scene types may be selected for the same subject depending on the recording conditions.
3. Basic Operations – Intelligent Auto Mode AF Mode 1 Changing the AF mode. • Each press of [ [ ]/[ ] changes the AF mode. ] ([Human Detect AF]/[Human/Animal Detect AF]) The camera detects a person’s face, eyes, and body (entire body, upper half of the body, or head) and adjusts the focus. When animal detection is enabled, animals, such as birds, canines (including wolves), and felines (including lions) will also be detected.
3. Basic Operations – Intelligent Auto Mode [ ] ([Tracking]) When the focus mode is set to [AFC], the AF area follows the movement of the subject, maintaining focusing. 1 Aim the AF area over the subject and then press and hold the shutter button halfway. • The camera will track the subject while the shutter button is pressed halfway or fully.
3. Basic Operations – Recording Using Touch Functions Recording Using Touch Functions ≥ Touch AF/Touch Shutter: 109 ≥ Touch AE: 112 Touch AF/Touch Shutter Touch functions allow you to focus on the point that you touch, release the shutter, etc. • With the default settings, the Touch Tab is not displayed. Set [Touch Tab] to [ON] in [Touch Settings] in the [Custom] ([Operation]) menu.
3. Basic Operations – Recording Using Touch Functions 1 2 Touch [ ]. Touch the icon. ≥The icon switches each time you touch it. (Touch AF) Focus on the Touched Position. (Touch Shutter) Record with focus on the point touched. (OFF) 3 (When set to anything other than OFF) Touch the subject.
3. Basic Operations – Recording Using Touch Functions • When the Touch Shutter fails, the AF area first turns red and then disappears. • Refer to “Operations on the AF area movement screen” for information about operations to move the AF area.
3. Basic Operations – Recording Using Touch Functions Touch AE This function adjusts the brightness according to a touched position. When a subject’s face appears dark, you can make the screen brighter to match the face. • With the default settings, the Touch Tab is not displayed. Set [Touch Tab] to [ON] in [Touch Settings] in the [Custom] ([Operation]) menu. ([Touch Settings]: 560) 1 2 Touch [ Touch [ ]. AE ]. ≥The Touch AE settings screen appears.
3. Basic Operations – Recording Using Touch Functions 3 Touch the subject to which you wish to adjust the brightness. • To return the position to which to adjust the brightness to the center, touch [Reset]. ュリヴヱハ 4 5HVHW 6HW Touch [Set]. How to Disable Touch AE Touch [ ]. • When the following function is being used, Touch AE is not available: – [Live Cropping] • You can also adjust both the focus and brightness to those of the position you touch.
4.
4. Image Recording – [Aspect Ratio] [Aspect Ratio] You can select the image aspect ratio.
4. Image Recording – [Picture Size] [Picture Size] Sets the picture’s image size. [ ][ ] Select [Picture Size] [Aspect Ratio] [4:3] [3:2] [16:9] [1:1] Picture size [L] 20M [M] 10.5M [S] 5M 5184k3888 3712k2784 2624k1968 [L] 18M [M] 9M [S] 4.5M 5184k3456 3712k2480 2624k1752 [L] 15M [M] 8M [S] 2M 5184k2920 3840k2160 1920k1080 [L] 15M [M] 7.5M [S] 4M 3888k3888 2784k2784 1968k1968 • When [Ex. Tele Conv.
4. Image Recording – [Picture Quality] [Picture Quality] Set the compression rate used for storing pictures. [ ][ Setting ] Select [Picture Quality] File format Settings details JPEG images that give priority to image [FINE] quality. JPEG [STD.] JPEG images of standard image quality. This is useful for increasing the number of recordable pictures without changing the picture size. [RAWiFINE] [RAWiSTD.] [RAW] RAWiJPEG RAW This records RAW and JPEG images ([FINE] or [STD.]) simultaneously.
4. Image Recording – [Picture Quality] • Note on RAW RAW format refers to a data format of images that have not been processed on the camera. Playback and editing of RAW images require the camera or the dedicated software. – You can process RAW images on the camera. ([RAW Processing]: 461) – Use software (“SILKYPIX Developer Studio” by Ichikawa Soft Laboratory) to process and edit RAW files on a PC.
4. Image Recording – [Double Card Slot Function] [Double Card Slot Function] This sets the way recording to the card slots 1 and 2 is performed. [ ][ ] Select [Double Card Slot Function] Selects the priority of card slots for recording. [Destination Card Slot]: [ [Relay Rec] [ ]/ ] Relays recording to the card in the other card slot after the first card runs out of free space. [Recording Method] [Backup Rec] Records the same images to both cards simultaneously.
4. Image Recording – [Double Card Slot Function] Notes about relay recording • The following video cannot be continued to be recorded on another card: – [Loop Recording (video)] Notes about Backup Recording • We recommend using cards with the same Speed Class rating and capacity. If the card Speed Class or capacity is insufficient when video recording, recording to both cards stops. • Backup recording is not available with the following video.
4. Image Recording – [Folder / File Settings] [Folder / File Settings] Set the folder and file name where to save the images. Folder name 100ABCDE (1) (2) (1) Folder number (3 digits, 100 to 999) (2) 5-character user-defined segment File name PABC0001.
4. Image Recording – [Folder / File Settings] [ ][ [Select Folder]*1 ] Select [Folder / File Settings] Selects a folder for storing images. Creates a new folder with an incremented folder number. • If there are no recordable folders in the card, a screen for [Create a New Folder] resetting the folder number is displayed. [OK]: Increments the folder number without changing the 5-character user-defined segment ((2) above). [Change]: Changes the 5-character user-defined segment ((2) above).
4. Image Recording – [Folder / File Settings] • Each folder can store up to 1000 files. • File numbers are assigned sequentially from 0001 to 9999 in the order of recording. If you change the storage folder, a number continuing on from the last file number will be assigned. • In the following cases, a new folder with an incremented folder number will be created automatically when the next file is saved: – The number of files in the current folder reaches 1000. – The file number reaches 9999.
4. Image Recording – [File Number Reset] [File Number Reset] Refresh the folder number to reset the file number to 0001. [ ][ ] Select [File Number Reset] Settings: [Card Slot 1]/[Card Slot 2] • When the folder number reaches 999, the file number cannot be reset. We recommend backing up your data and formatting the card. • To reset the folder number to 100: 1 Perform [Card Format] to format the card.
5.
5. Focus/Zoom – Selecting the Focus Mode Selecting the Focus Mode Select the focusing method (focus mode) to match subject movement. 1 Set the focus mode lever. [S] ([AFS]) This is suitable for recording still subjects. When the shutter button is pressed halfway, the camera focuses once. The focus stays locked while the shutter button is pressed halfway. [C] ([AFC]) This is suitable for recording moving subjects.
5. Focus/Zoom – Selecting the Focus Mode • In the following cases, [AFC] works the same as [AFS] when the shutter button is pressed halfway: –[ ] mode – In low light situations • This function is not available for Post-Focus recording.
5. Focus/Zoom – Using AF Using AF ≥ [AF Custom Setting(Photo)]: 133 AF (Auto Focus) refers to automatic focusing. Select the focus mode and the AF mode appropriate for the subject and scene. 1 Set the focus mode to [S] or [C]. ≥Set the focus mode lever.
5. Focus/Zoom – Using AF 2 Select the AF mode. ≥Press [ ] to display the AF mode selection screen, and set using or . (Selecting the AF Mode: 136) ≥Selection is also possible by pressing [ ]. ] switches between [ ] and [ ]. (AF • In [iA] mode, each press of [ Mode: 107) 3 Press the shutter button halfway. ≥The AF operates.
5. Focus/Zoom – Using AF Low illumination AF • In dark environments, low illumination AF automatically operates, and the focus icon is indicated as [ LOW ]. • Achieving focus may take more time than usual. Starlight AF • If the camera detects stars in the night sky after determining low illumination AF, then Starlight AF will be activated. When focus is achieved, the focus icon will display [ displayed on the area in focus. • Edges of the screen cannot detect Starlight AF.
5. Focus/Zoom – Using AF • Subjects and recording conditions that make focusing difficult with AF mode – Fast-moving subjects – Extremely bright subjects – Subjects without contrast – Subjects recorded through windows – Subjects near shiny objects – Subjects in very dark locations – When recording subjects both distant and near • You can change the operation of AF-ON so that AF prioritizes subjects close by.
5. Focus/Zoom – Using AF Magnify the AF Area Position ([AF-Point Scope]) This magnifies the focus point when the AF mode is [ ], [ ], or [ ]. (In other AF modes, the center of the screen is magnified.) You can check focus and observe an enlarged subject as with a telephoto lens. 1 Register [AF-Point Scope] to the Fn button. (Fn Buttons: 472) 2 Enlarge the AF area position by pressing and holding the Fn button.
5. Focus/Zoom – Using AF [AF Custom Setting(Photo)] Select features of AF operation when recording using [AFC] that are appropriate for the subject and scene. Each of these features can be further customized. 1 2 Set the focus mode to [AFC]. (Selecting the Focus Mode: 126) Set [AF Custom Setting(Photo)]. ≥ [ ][ ] [AF Custom Setting(Photo)] [Set 1] Basic general-purpose setting. [Set 2] Suggested for situations where the subject moves at a constant speed in one direction.
5. Focus/Zoom – Using AF • When the following function is being used, [AF Custom Setting(Photo)] is not available: – [6K/4K PHOTO] Adjusting AF Custom Settings 1 Press 21 to select the AF Custom setting type. 2 Press 34 to select items and press 21 to adjust. 3 Press • To reset settings to the default, press [DISP.]. or . Sets the tracking sensitivity for the movement of subjects. When the distance to the subject changes drastically, [i] the camera re-adjusts the focus immediately.
5. Focus/Zoom – Using AF Sets the level of movement prediction for changes in the speed of subject movement. • At larger setting values, the camera tries to maintain focus by responding even to sudden movements of the subject. [Moving Subject Prediction] However, the camera becomes more sensitive to slight movements of the subject, so focusing may become unstable. [0] [i1] [i2] This is suited to a subject with minimal changes in speed. These are suited to a subject that changes its speed.
5. Focus/Zoom – Selecting the AF Mode Selecting the AF Mode ≥ [Human Detect AF]/[Human/Animal Detect AF]: 139 ≥ [Tracking]: 144 ≥ [225-Area]: 146 ≥ [Zone (Vert./ Horz.)]/[Zone (Square)]/[Zone (Oval)]: 147 ≥ [1-Area+]/[1-Area]: 150 ≥ [Pinpoint]: 153 ≥ [Custom1] to [Custom3]: 156 Select the focusing method to match the position and number of subjects. 1 Press [ ]. ≥The AF mode selection screen appears.
5. Focus/Zoom – Selecting the AF Mode 2 Select the AF mode. ≥Press 21 to select an item and then press ≥Selection is also possible by pressing [ ]. [Human Detect AF]/ [Human/Animal Detect AF] ([Human Detect AF]/[Human/Animal Detect AF]: 139) [Tracking] ([Tracking]: 144) [225-Area] ([225-Area]: 146) [Zone (Vert./ Horz.)] ([Zone (Vert./ Horz.)]: 147) [Zone (Square)]*1 ([Zone (Square)]: 147) [Zone (Oval)] ([Zone (Oval)]: 148) [1-Area+] ([1-Area+]: 150) 137 or .
5. Focus/Zoom – Selecting the AF Mode [1-Area] ([1-Area]: 150) [Pinpoint] ([Pinpoint]: 153) ヤヒ [Custom1]*1/ ヤビ [Custom2]*1/ ヤピ [Custom3]*1 ([Custom1] to [Custom3]: 156) *1 This is not displayed with the default settings. From [Show/Hide AF Mode] in the [Custom] ([Focus/Shutter]) menu, you can set the items to display on the selection screen. ([Show/Hide AF Mode]: 556) • When the following function is being used, [ ] is not available.
5. Focus/Zoom – Selecting the AF Mode [Human Detect AF]/[Human/Animal Detect AF] The camera detects a person’s face, eyes, and body (entire body, upper half of the body, or head) and adjusts the focus. With animal detection enabled, the camera will also detect animals, such as birds, canines (including wolves), and felines (including lions). When the camera detects a person’s face (A)/(B) or body or an animal’s body (C)*1, an AF area is displayed. *1 When the animal detection is enabled.
5. Focus/Zoom – Selecting the AF Mode • When a person’s eyes are detected, the eye closer to the camera will be brought into focus. The exposure will be adjusted to the face. (When [Metering Mode] is set to [ • The camera can detect the faces of up to 15 people. • The camera can detect a combined total of up to 3 human and animal bodies. • If any humans or animals are not detected, the camera operates as [ ].
5. Focus/Zoom – Selecting the AF Mode Specify the Person, Animal, or the Person’s Eye to Bring into Focus When the person or animal to be brought into focus is shown using the white AF area, you can change this to a yellow AF area. Touch operation Touch the person, animal or eye indicated with the white AF area. • The AF area will change to yellow. • Touching outside the AF area displays the AF area setting screen. Touch [Set] to set the [ ] AF area at the position touched.
5. Focus/Zoom – Selecting the AF Mode Move and Change the Size of the Yellow AF Area You can move the yellow AF area to the position of the white AF area and replace the white AF area with the yellow AF area. If moving to a position outside an AF area, then the [ ] AF area will be set. 1 Press [ 2 Select [ ] to display the AF mode selection screen. 3 Press 3421 to move the position of the AF area. 4 Rotate 5 Press ] or [ , ] and then press 4. or to change the size of the AF area. .
5. Focus/Zoom – Selecting the AF Mode Operations on the AF area movement screen Button Touch operation operation 3421 Touch Pinch out/ pinch in / — Description of operation Moves the AF area. Enlarges/reduces the AF area in small steps. Enlarges/reduces the AF area. First time: Returns the AF area position to the [DISP.] [Reset] center. Second time: Returns the AF area size to the default setting.
5. Focus/Zoom – Selecting the AF Mode [Tracking] When the focus mode is set to [AFC], the AF area follows the movement of the subject, maintaining focusing. 1 Start tracking. ≥Aim the AF area over the subject, and press the shutter button halfway. The camera will track the subject while the shutter button is pressed halfway or pressed fully. • If tracking fails, the AF area blinks red. • When set to [AFS], the focus will be on the AF area position. Tracking will not work.
5. Focus/Zoom – Selecting the AF Mode • In [ ] mode, while recording video, and while recording with [6K/4K Burst(S/ S)], tracking will continue even if the shutter button is released. To cancel tracking, press or , or touch [ ]. Tracking is also available with [AFS]. • Set [Metering Mode] to [ ] to continue to adjust the exposure as well. • In the following, [ ] operates as [ ]: – [Monochrome]/[L.Monochrome]/[L.Monochrome D]/[L.
5. Focus/Zoom – Selecting the AF Mode [225-Area] The camera selects the most optimal AF area to focus from 225 areas. When multiple AF areas are selected, all selected AF areas will be brought into focus. When the focus mode is set to [AFC], ensuring that the subject stays within the 225 areas during recording will ensure the subject stays in focus. Specify the [AFC] Start Point When the focus mode is set to [AFC], you can specify at which area to start [AFC]. 1 Set the focus mode to [AFC].
5. Focus/Zoom – Selecting the AF Mode [Zone (Vert./ Horz.)]/[Zone (Square)]/[Zone (Oval)] [Zone (Vert./ Horz.)] Within the 225 AF areas, vertical and horizontal zones can be focused. Horizontal pattern Vertical pattern [Zone (Square)] Within the 225 AF areas, a central square zone can be focused.
5. Focus/Zoom – Selecting the AF Mode [Zone (Oval)] Within the 225 AF areas, a central oval zone can be focused. •[ ] is not displayed with default settings. Set [Zone (Square)] to [ON] in [Show/ Hide AF Mode] in the [Custom] ([Focus/Shutter]) menu.
5. Focus/Zoom – Selecting the AF Mode Move and Change the Size of the AF Area 1 Press [ 2 Select [ ] to display the AF mode selection screen. 3 Press 3421 to move the position of the AF area. ], [ ] or [ ] and then press 4. • You can also move the AF area by touching. When [ ] is selected • Press 34 to switch to a horizontal pattern AF area. • Press 21 to switch to a vertical pattern AF area. 4 Rotate , or to change the size of the AF area.
5. Focus/Zoom – Selecting the AF Mode [1-Area+]/[1-Area] [1-Area+] Emphasis within a single AF area can be focused. Even when the subject moves out of the single AF area, the subject remains focused in a supplementary AF area (A). ]. • Effective when recording moving subjects that are difficult to track with [ (A) [1-Area] Specify the point to be brought into focus.
5. Focus/Zoom – Selecting the AF Mode Switching of Automatic Detection Automatic detection is now available in the [1-Area+]/[1-Area] AF modes. When a part of a human or animal enters the [1-Area+]/[1-Area] AF area, the automatic detection AF area is indicated in yellow. Eye detection works when a person’s face is inside the AF area. 1 Press [ 2 Select [ ] to display the AF mode selection screen. ] or [ ] and then press 3. • Each press of 3 switches automatic detection.
5. Focus/Zoom – Selecting the AF Mode Move and Change the Size of the AF Area 1 Press [ 2 Select [ ] to display the AF mode selection screen. 3 Press 3421 to move the position of the AF area. 4 Rotate 5 Press ]/[ , ]/[ or ] or [ ]/[ ]/[ ] and then press 4. to change the size of the AF area. .
5. Focus/Zoom – Selecting the AF Mode [Pinpoint] You can achieve a more precise focus on a small point. If you press the shutter button halfway, the screen that lets you check the focus will be enlarged. • When the focus mode is set to [AFC], [ 153 ] is not available.
5. Focus/Zoom – Selecting the AF Mode Move the Position of the AF Area 1 Press [ 2 Select [ ] to display the AF mode selection screen. 3 Press 3421 to set the position of [i] and then press ] and then press 4. • The selected position on the screen will be enlarged. • The AF area cannot be moved to the edge of the screen. 4 Press 3421 to fine-adjust the position of [i]. 5 Press or . 154 or .
5. Focus/Zoom – Selecting the AF Mode Operations on the Magnification Window Button Touch operation operation 3421 Touch Pinch out/ pinch in — Description of operation Moves [i]. Enlarges/reduces the screen in small steps. Enlarges/reduces the screen. Switches magnification window (windowed mode/full screen mode). First time: Returns to the screen in Step 3. [DISP.] [Reset] Second time: Returns the AF area position to the center.
5. Focus/Zoom – Selecting the AF Mode [Custom1] to [Custom3] The shape of the AF area can be set freely in the 225 AF areas. The set AF area can be registered using [ ヤヒ ] to [ ヤピ ]. The AF area can also be moved while maintaining the set shape. • This is not displayed with default settings. In [Show/Hide AF Mode] in the [Custom] ([Focus/Shutter]) menu, set [Custom1] to [Custom3] to [ON].
5. Focus/Zoom – Selecting the AF Mode Register the AF Area Shape 1 Press [ 2 Select one of [ ] to display the AF mode selection screen. 3 Select the AF area. ヤヒ ] to [ ヤピ ] and then press 3. Touch operation Touch the area to make the AF area. • To select consecutive points, drag the screen. • To cancel selection of the selected AF area, touch it again. Button operation Press 3421 to select the AF area and then set with or .
5. Focus/Zoom – Selecting the AF Mode Move the Position of the AF Area 1 Press [ 2 Select a registered AF mode shape ([ ] to display the AF mode selection screen. 3 Press 3421 to move the position of the AF area and then press ヤヒ ] to [ ヤピ ]) and then press 4. • Press [DISP.] to return the [i] position to the center. 158 .
5. Focus/Zoom – AF Area Movement Operation AF Area Movement Operation ≥ Moving the AF Area by Touch: 162 ≥ Moving the AF Area Position with the Touch Pad: 164 ≥ [Focus Switching for Vert / Hor]: 167 In default settings, you can use the joystick to directly move and change the size of the AF area when recording. 1 Move the position of the AF area. ≥On the recording screen, tilt the joystick.
5. Focus/Zoom – AF Area Movement Operation • Pressing enables switching between the default and set AF area positions. In [ ]/[ ], this operation switches the person, animal or eye to be brought into focus. In [ 2 ], this operation displays the enlarged screen. Change the size of the AF area. ≥Rotate , or . • Use for more detailed adjustments. • The first press of [DISP.] returns the AF area position to the center. The second press returns the size of the AF area to the default.
5. Focus/Zoom – AF Area Movement Operation 3 Confirm your selection. ≥Press the shutter button halfway. ≥This will return you to the recording screen. • When [Metering Mode] is [ ], the metering target also moves together with the AF area. • In [ ], [ ], [ ], and [ ヤヒ ] to [ ヤピ ], the size of the AF area cannot be changed. • In [ ], it is not possible to move the AF area or change its size. • In the [iA] mode, the [ ]/[ ] AF area cannot be moved.
5. Focus/Zoom – AF Area Movement Operation Moving the AF Area by Touch You can move the AF area to a touched position on the monitor. You can also change the size of the AF area. [ ][ [AF] [AF+AE] ] [Touch Settings] Select [Touch AF] This focuses on the touched subject. This focuses on and adjusts brightness for the touched subject. • The default setting is [AF]. Focus on the Touched Position ([AF]) 1 Touch the subject. 2 Pinch out/pinch in to change the AF area size.
5. Focus/Zoom – AF Area Movement Operation Focus on and Adjust Brightness for the Touched Position ([AF+AE]) 1 Touch the subject to which you wish to adjust the brightness. • At the touched position, an AF area that works in the same way as [ ] is displayed. This places a point to adjust brightness at the center of the AF area. ュリヴヱハ 2 5HVHW 6HW Pinch out/pinch in to change the AF area size. • The first touch of [Reset] returns the AF area position to the center.
5. Focus/Zoom – AF Area Movement Operation Moving the AF Area Position with the Touch Pad During viewfinder display, you can touch the monitor to change the position and size of the AF area. 1 Set [Touch Pad AF]. 2 Move the position of the AF area. ≥ [ ][ ] [Touch Settings] [Touch Pad AF] [EXACT]/[OFFSET1] to [OFFSET7] ≥During viewfinder display, touch the monitor.
5. Focus/Zoom – AF Area Movement Operation 3 Change the size of the AF area. ≥Rotate , or . • Use for more detailed adjustments. • The first press of [DISP.] returns the AF area position to the center. The second press returns the size of the AF area to the default. 4 Confirm your selection. ≥Press the shutter button halfway.
5. Focus/Zoom – AF Area Movement Operation Setting Items ([Touch Pad AF]) Moves the AF area of the viewfinder by touching a desired position on the touch pad. [EXACT] Moves the AF area of the viewfinder according to the distance you drag your finger on the touch pad. Select the range to be detected with the drag operation.
5. Focus/Zoom – AF Area Movement Operation [Focus Switching for Vert / Hor] Memorizes separate positions for AF areas for when the camera is vertically aligned and for when it is horizontally aligned. Two vertical orientations, left and right, are available. [ [ON] [OFF] ][ ] Select [Focus Switching for Vert / Hor] Memorizes separate positions for vertical and horizontal orientations. Sets the same position for vertical and horizontal orientations. • In MF, this memorizes the MF Assist position.
5. Focus/Zoom – Record Using MF Record Using MF MF (Manual Focus) refers to manual focusing. Use this function when you want to fix the focus or when the distance between the lens and the subject is determined and you do not want to activate AF. 1 Set the focus mode lever to [MF].
5. Focus/Zoom – Record Using MF 2 Select the focus point. 3 Confirm your selection. ≥Tilt the joystick to select the focus point. • To return the point to be brought into focus to the center, press [DISP.]. ≥Press . ≥This switches to the MF Assist screen, and shows an enlarged display.
5. Focus/Zoom – Record Using MF 4 Adjust the focus. The operations used to focus differ depending on the lens. When using an interchangeable lens with a focus ring Rotate to (A) side: Focuses on nearby subject Rotate to (B) side: Focuses on distant subjects (B) (A) When using the interchangeable lens having a focus lever Move to (C) side: Focuses on nearby subject Move to (D) side: Focuses on distant subjects • The focusing speed varies depending on how far you move the focus lever.
5. Focus/Zoom – Record Using MF When using an interchangeable lens with no focus ring Press 1: Focuses on nearby subject Press 2: Focuses on distant subjects • Pressing and holding 2/1 will increase the focus speed. • Focus can also be adjusted by dragging the slide bar. • This will display the in-focus portion highlighted with color. (Focus Peaking) • A recording distance guideline is displayed.
5. Focus/Zoom – Record Using MF 5 Close the MF Assist screen. 6 Start recording. ≥Press the shutter button halfway. ≥This operation can also be performed by pressing ≥Press the shutter button fully. 172 .
5. Focus/Zoom – Record Using MF Operations on the MF Assist Screen Button Touch operation operation 3421 *1 Drag Pinch out/ pinch in — Description of operation Moves the enlarged display position. Enlarges/reduces the screen in small steps. Enlarges/reduces the screen. Switches magnification window (windowed mode/full screen mode). First time: Returns the MF Assist position to the [DISP.]*1 [Reset]*1 center. Second time: Returns the MF Assist magnification to the default setting.
5. Focus/Zoom – Record Using MF • You can also display the MF Assist screen by pressing the [ ]. • MF Assist and MF Guide may not display depending on the lens used. You can, however, display MF Assist by directly operating the camera using the touch screen or a button. • During MF, pressing [AF ON] will activate AF. • The recording distance reference mark indicates the position of the imaging surface. This becomes the reference when measuring the recording distance.
5. Focus/Zoom – Recording with Zoom Recording with Zoom ≥ Extended Tele Conversion: 177 ≥ [Power Zoom Lens]: 181 Use the optical zoom of the lens to zoom to telephoto or wide-angle. When taking pictures, use [Ex. Tele Conv.] to increase a telescopic effect without image deterioration. When recording videos, use [Image Area of Video] to obtain the same telescopic effect as [Ex. Tele Conv.]. • For details about [Image Area of Video] ([Image Area of Video]: 349) 1 Perform zoom operations.
5. Focus/Zoom – Recording with Zoom Interchangeable lens that supports the power zoom (electrically operated zoom) Move the zoom lever. (The zoom speed varies depending on how far you move the lever.) • If you set [Zoom Control] to an Fn button, you can operate the optical zoom slowly by pressing 21 or fast by pressing 34. (T) (W) Interchangeable lens that does not support the zoom The optical zoom is not available. ≥The focal length is displayed on the recording screen.
5. Focus/Zoom – Recording with Zoom Extended Tele Conversion [Ex. Tele Conv.] enables you to take pictures that are further enlarged beyond what is available with the optical zoom, without any deterioration in image quality. • The [Ex. Tele Conv.] maximum magnification ratio differs depending on the [Picture Size] set in the [Photo] ([Image Quality]) menu. – Set to [ M]: 1.4k – Set to [ S]: 2.0k 1 Set [Picture Size] to [M] or [S]. 2 Set [Ex. Tele Conv.].
5. Focus/Zoom – Recording with Zoom Changing the Zoom Magnification Button operation 1 Set [Ex. Tele Conv.] to [ZOOM]. 2 Set the Fn button to [Zoom Control]. (Fn Buttons: 472) 3 Press the Fn button. 4 Press the cursor buttons to operate the zoom. • [ ][ ] [Ex. Tele Conv.] [ZOOM] 31: T (telephoto) 24: W (wide-angle) • Press the Fn button again, or wait a specified time to end zoom operation.
5. Focus/Zoom – Recording with Zoom Touch operation • With the default settings, the Touch Tab is not displayed. Set [Touch Tab] to [ON] in [Touch Settings] in the [Custom] ([Operation]) menu. ([Touch Settings]: 560) 1 Set [Ex. Tele Conv.] to [ZOOM]. 2 Touch [ ]. 3 Touch [ ]. 4 Drag the slide bar to operate the zoom. • [ ][ ] [Ex. Tele Conv.] [ZOOM] (T) (W) (T): Telephoto (W): Wide-angle • To end Touch Zoom operations, touch [ 179 ] again.
5. Focus/Zoom – Recording with Zoom • When displaying the [Ex. Tele Conv.] setting screen using the Fn button, pressing [DISP.] allows you to change the [Picture Size] setting. • When the following functions are being used, [Ex. Tele Conv.
5. Focus/Zoom – Recording with Zoom [Power Zoom Lens] Sets the screen display and operations when using an interchangeable lens that is compatible with power zoom (electrically operated zoom). • This may only be selected when using a lens that is compatible. [ ][ ] Select [Power Zoom Lens] When it is set to [ON] and a zoom operation is performed, [Step Zoom] zooming stops at each decided focal point position. This setting does not work when recording video or 6K/4K photos with [6K/4K Pre-Burst].
6.
6. Drive/Shutter/Image Stabilizer – Selecting the Drive Mode Selecting the Drive Mode You can switch the drive mode to Single, Burst, etc. to match the recording conditions. 1 Rotating the drive mode dial. [Single] Takes one picture each time the shutter button is pressed. [Burst] (Taking Burst Pictures: 185) Takes pictures continuously while the shutter button is pressed and held.
6. Drive/Shutter/Image Stabilizer – Selecting the Drive Mode Self-timer (Recording Using the Self-timer: 228) Takes pictures when the set time elapses after the shutter button is pressed.
6. Drive/Shutter/Image Stabilizer – Taking Burst Pictures Taking Burst Pictures Takes pictures continuously while the shutter button is pressed and held. 1 Set the drive mode dial to [ 185 ].
6. Drive/Shutter/Image Stabilizer – Taking Burst Pictures 2 Select the burst rate. ≥ [ ][ ] [Burst Rate] [H] Takes high-speed burst pictures. [M] Takes medium-speed burst pictures. [L] Takes low-speed burst pictures. 3 Close the menu. 4 Start recording. ≥Press the shutter button halfway. • Takes burst pictures while the shutter button is pressed fully.
6.
6. Drive/Shutter/Image Stabilizer – Taking Burst Pictures Number of Pictures That Can Be Taken Continuously When you press the shutter button halfway, the number of pictures that can be taken continuously will appear on the recording screen. Example) When 20 frames: [r20] • Once recording starts, the number of pictures that can be taken continuously will decrease. When [r0] appears, the burst rate decreases. • When [r99i] is displayed on the recording screen, you can take 100 or more burst pictures.
6. Drive/Shutter/Image Stabilizer – Taking Burst Pictures Focus when Taking Burst Pictures [Focus/Shutter Priority] Focus mode [H] ([Focus/ [M]/[L] Shutter Priority]: 554) [FOCUS] [AFS] [BALANCE] Fixed to the focus of the first frame [RELEASE] [FOCUS] [AFC] Estimated focus [BALANCE] Estimated focus [RELEASE] [MF] Normal focus — Focus set with manual focus • When the subject is dark with [AFC], the focus is fixed to that of the first frame.
6. Drive/Shutter/Image Stabilizer – Taking Burst Pictures • It may take a while to save burst pictures. If you continue to take burst pictures while saving is in progress, the maximum number of frames recordable will be reduced. When taking burst pictures, we recommend using a high-speed card.
6. Drive/Shutter/Image Stabilizer – 6K/4K Photo Recording 6K/4K Photo Recording With 6K Photo, you can take high-speed burst pictures at 30 frames/ second and save the desired pictures, each made up of approx. 18 million pixels, extracted from their burst file. With 4K photo, you can take high-speed burst pictures at 60 frames/ second and save the desired pictures, each made up of approx. 8 million pixels.
6. Drive/Shutter/Image Stabilizer – 6K/4K Photo Recording 1 Set the drive mode dial to [ 2 Select [Picture Size / Burst Speed]. ≥ [ Speed] ][ ] [6K/4K PHOTO] [Picture Size / Burst Picture size [6K 18M] [4K H 8M] [4K 8M] ].
6. Drive/Shutter/Image Stabilizer – 6K/4K Photo Recording 3 Select [Rec Method]. [ ][ ][ ] ([6K/4K Burst]) When you wish to capture the best moments of a fast-moving subject Takes burst pictures while the shutter button is pressed. Audio recording: None [ ][ ][ ] ([6K/4K Burst(S/S)]) “S/S” is an abbreviation for start/stop. When you wish to capture an unpredictable photo opportunity Starts taking burst pictures when the shutter button is pressed.
6. Drive/Shutter/Image Stabilizer – 6K/4K Photo Recording 4 Close the menu. 5 Start recording. ≥Press the shutter button halfway. • [Continuous AF] works and the focus is adjusted continuously during recording with AF. [6K/4K Burst] 1 Press the shutter button halfway. 2 Press the shutter button fully and keep it pressed during recording. (A) (B) (A) Press and hold (B) Recording is performed • Press the shutter button fully early because recording will take approx. 0.
6. Drive/Shutter/Image Stabilizer – 6K/4K Photo Recording [6K/4K Burst(S/S)] 1 Press the shutter button fully to start recording. 2 Press the shutter button fully again to stop recording. (C) (D) (E) (C) Start (First) (D) Stop (Second) (E) Recording is performed • You can add markers by pressing [Q] during recording. (Up to 40 markers per recording) This allows you to skip to the positions where you added markers when selecting pictures from a 6K/4K burst file.
6. Drive/Shutter/Image Stabilizer – 6K/4K Photo Recording • In default settings, Auto Review operates, and a screen that lets you select pictures from a burst file will be displayed. To continue recording, press the shutter button halfway to return to the recording screen. For how to select and save pictures from a recorded 6K/4K burst file (Selecting Pictures from a 6K/4K Burst File: 198) [Pre-Burst Recording] ([6K/4K Burst]/[6K/4K Burst(S/S)]) The camera starts recording approx.
6. Drive/Shutter/Image Stabilizer – 6K/4K Photo Recording • For 6K/4K photo, the menu items below are fixed to the following settings: – [Shutter Type]: [ELEC.
6. Drive/Shutter/Image Stabilizer – Selecting Pictures from a 6K/4K Burst File Selecting Pictures from a 6K/4K Burst File ≥ Correcting Pictures After Recording (Post-Recording Refinement): 201 ≥ Picture Selection Operations: 203 You can select pictures from the 6K/4K burst files and save them. • When continuing to select pictures from the Auto Review after recording 6K/4K photos, start the operation from either Step 1 2 or 3. Select a 6K/4K burst file on the playback screen.
6. Drive/Shutter/Image Stabilizer – Selecting Pictures from a 6K/4K Burst File 2 Roughly select the scene. ≥Drag the slide bar (A). • For information about how to use the picture selection slide view screen. (Picture Selection Slide View Screen Operations: 203) • If the images were recorded with [6K/4K Burst] or [6K/4K Burst(S/S)], touching [ ] allows you to select the scene in the 6K/4K burst playback screen. (6K/4K Burst Playback Screen Operations: 205) (A) 3 Select the frame to save.
6. Drive/Shutter/Image Stabilizer – Selecting Pictures from a 6K/4K Burst File 4 Save the picture. ≥Touch [ ] or [ ]. ≥A confirmation screen appears. • The picture is saved in JPEG format ([FINE] picture quality). • The recording information (Exif information), such as the shutter speed, aperture, and ISO sensitivity, is also saved with the picture that is saved.
6. Drive/Shutter/Image Stabilizer – Selecting Pictures from a 6K/4K Burst File Correcting Pictures After Recording (Post-Recording Refinement) Correcting Distortion in Pictures ([Reduce Rolling Shutter]) When saving pictures, correct any distortion caused by the electronic shutter (rolling shutter effect). 1 On the save confirmation screen in Step 4 (Selecting Pictures from a 6K/4K Burst File: 198), touch [Reduce Rolling Shutter].
6. Drive/Shutter/Image Stabilizer – Selecting Pictures from a 6K/4K Burst File Reducing Noise Caused by High Sensitivity ([6K/4K PHOTO Noise Reduction]) When saving pictures, reduce the noise that occurs due to high ISO sensitivity. [ ][ ] Select [6K/4K PHOTO Noise Reduction] Settings: [AUTO]/[OFF] • This is not applied to pictures saved with [6K/4K PHOTO Bulk Saving].
6.
6. Drive/Shutter/Image Stabilizer – Selecting Pictures from a 6K/4K Burst File Button Touch operation operation Description of operation Selects a frame. / 21/ Drag/ • To change the frames displayed in the picture selection slide view, select the frame at the left/ right end and then touch [ 21 Press and hold — Continuously rewinds or forwards Pinch out/ pinch in [ Enlarges or reduces the display. display (during enlarged display).
6. Drive/Shutter/Image Stabilizer – Selecting Pictures from a 6K/4K Burst File Button Touch operation operation Description of operation 1 Moves to the next marker. 2 Moves to the previous marker.
6. Drive/Shutter/Image Stabilizer – Selecting Pictures from a 6K/4K Burst File Button Touch operation operation 3 — 4 — 1/ / — 2/ / — — Touch/drag Pinch out/ pinch in — / 3421 [ Drag Performs continuous playback or pauses (during continuous playback). Performs continuous rewind playback or pauses (during continuous rewind playback). Performs fast-forward playback or performs frame-by-frame forwarding (while paused).
6. Drive/Shutter/Image Stabilizer – Selecting Pictures from a 6K/4K Burst File Button Touch operation operation 1 — Moves to the next marker. 2 — Moves to the previous marker. Description of operation • To play and edit 6K burst files on a PC, you need a high-performance PC environment. We recommend selecting and saving pictures with the camera. [6K/4K PHOTO Bulk Saving] You can save any 5 second period of pictures from a 6K/4K burst file all at once. 1 Select [6K/4K PHOTO Bulk Saving].
6. Drive/Shutter/Image Stabilizer – Post-Focus Recording Post-Focus Recording ≥ Selecting the Focus Point for the Picture to Save: 212 ≥ Focus Stacking: 214 Taking burst pictures with the same image quality as 6K/4K photos while automatically changing the focus point. You can select the focus point for the picture to save after recording. Also Focus Stacking lets you combine images with multiple focus points. This function is suitable for subjects that do not move.
6. Drive/Shutter/Image Stabilizer – Post-Focus Recording 3 A picture with the desired focus point is made. • Use a UHS Speed Class 3 or higher card when recording. • If you are going to perform Focus Stacking after recording, we recommend using a tripod during recording. 1 Set the drive mode dial to [ 2 Set the image quality for [Post-Focus]. ≥ [ ][ ].
6. Drive/Shutter/Image Stabilizer – Post-Focus Recording 3 Close the menu. 4 Decide on the composition and then adjust the focus. ≥Press the shutter button halfway. ≥Press the shutter button halfway. ≥AF detects the focus point on the screen. (Excluding the edges of the screen) (A) • If no areas on the screen can be brought into focus, the focus icon (A) blinks and recording is not possible. • Maintain the same distance to the subject and the same composition until recording finishes.
6. Drive/Shutter/Image Stabilizer – Post-Focus Recording 5 Start recording. ≥Press the shutter button fully. (B) 9m59s • Recording is performed while automatically changing the focus point. When the icon (B) disappears, recording ends automatically. • A video will be recorded with [Rec. File Format] set to [MP4]. (Audio will not be recorded.) • In default settings, Auto Review operates, and a screen that lets you select the focus point will be displayed.
6. Drive/Shutter/Image Stabilizer – Post-Focus Recording Selecting the Focus Point for the Picture to Save 1 Select a Post-Focus image on the playback screen. (Playing Back Pictures: 445) ≥Select an image with the [ ] icon and then press 3. ≥You can also perform the same operation by touching the [ icon. 2 Touch the focus point. • When the point is in focus, a green frame appears. • If there is no picture with the selected point in focus, a red frame appears. A picture cannot be saved.
6. Drive/Shutter/Image Stabilizer – Post-Focus Recording Focus Point Selection Operations Button Touch operation operation 3421/ / Description of operation Selects a focus position. Touch • Selection is not possible during enlarged display. Enlarges the display. • During enlarged display, you can fine-adjust the focus by dragging the slide bar. (You can also perform the same operation by pressing 21.) Reduces the display (during enlarged display). [ ] Switches to Focus Stacking operation.
6. Drive/Shutter/Image Stabilizer – Post-Focus Recording Focus Stacking By merging multiple focus points, you can save pictures that are focused from the foreground through to the background. (A) (B) (C) (A) Closer (B) Focus (C) More distant 1 Touch [ ] on the screen for selecting the focus point. (Selecting the Focus Point for the Picture to Save: 212) ≥You can also perform the same operation by pressing [ 214 ].
6. Drive/Shutter/Image Stabilizer – Post-Focus Recording 2 Select the merging method. $XWR 0HUJLQJ 5DQJH 0HUJLQJ [Auto Merging] Automatically selects pictures suitable for merging and then merges them into a single picture. [Range Merging] Merges pictures with selected focus points into a single picture. 3 (When [Range Merging] is selected) Touch the focus points. 6HW &DQFHO ュリヴヱハ 6HW &DQFHO 5HVHW ュリヴヱハ 5HVHW • Select at least two points. Selected points are indicated with a green frame.
6. Drive/Shutter/Image Stabilizer – Post-Focus Recording 4 Save the picture. ≥Touch [ ]. Operations when [Range Merging] Is Selected Button Touch operation operation 3421/ / Touch / [ ] [Set/Cancel] [All] [DISP.] [Reset] / Description of operation Selects a point. Sets or cancels a point. Selects all points. (Before selecting points) Cancels all selections. (After selecting points) Merges the pictures and saves the resulting picture.
6. Drive/Shutter/Image Stabilizer – Recording with Time Lapse Shot Recording with Time Lapse Shot Pictures are taken automatically at a set recording interval. This feature is ideal for keeping track of changes over time in subjects such as animals and plants. The pictures taken will be saved as a set of group images that can also be combined into a video. • Check that the clock is set correctly.
6. Drive/Shutter/Image Stabilizer – Recording with Time Lapse Shot 2 Set [Mode] to [Time Lapse Shot]. 3 Set the recording settings. ≥ [ ][ Lapse Shot] ] [Time Lapse/Animation] [Mode] [Time [Mode] Switches between Time Lapse Shot and Stop Motion Animation. [Shooting Interval Setting] [ON]: Sets the interval before the next recording takes place. [OFF]: Takes pictures without leaving recording intervals. [Start Time] [Now]: Starts recording when the shutter button is pressed fully.
6. Drive/Shutter/Image Stabilizer – Recording with Time Lapse Shot 4 Close the menu. 5 Start recording. ≥Press the shutter button halfway. ≥Press the shutter button fully. • When [Start Time Set] is set, the camera will enter into sleep status until the start time is reached. • During recording standby, the camera enters into sleep status when no operation is performed for a certain period of time. 6 • The recording will stop automatically. Create a video.
6. Drive/Shutter/Image Stabilizer – Recording with Time Lapse Shot Operations during Time Lapse Shot Recording Pressing the shutter button halfway during sleep status will turn on the camera. • You can perform the following operations by pressing [Q] during Time Lapse Shot recording. [Continue] [Pause] [Resume] [End] Returns to the recording. (Only during recording) Pauses the recording. (Only during recording) Resumes the recording.
6. Drive/Shutter/Image Stabilizer – Recording with Time Lapse Shot • Pictures recorded to more than one card cannot be combined into a single video. • The camera gives priority to achieving the standard exposure, so it may not take pictures at the set interval or take the set number of pictures. Furthermore, it may not end at the end time displayed on the screen. • Time Lapse Shot is paused in the following cases.
6. Drive/Shutter/Image Stabilizer – Recording with Stop Motion Animation Recording with Stop Motion Animation Take pictures while moving the subject little by little. The pictures taken will be saved as a set of group images that can be combined into a stop motion video. 1 Set the drive mode dial to [ 2 Set [Mode] to [Stop Motion Animation]. ≥ ].
6. Drive/Shutter/Image Stabilizer – Recording with Stop Motion Animation 3 Set the recording settings. [Mode] Switches between Time Lapse Shot and Stop Motion Animation. [Add to Picture Group] Allows you to continue recording for a set of stop motion images that have already been recorded. 5 • Select an image and proceed to Step . [Auto Shooting] [ON]: Takes pictures automatically at a set recording interval. [OFF]: This is for taking pictures manually, frame by frame.
6. Drive/Shutter/Image Stabilizer – Recording with Stop Motion Animation 5 Start recording. ≥Press the shutter button fully. ≥Take pictures repeatedly while moving the subject little by little. • The recording screen displays up to two pictures taken previously. Use them as reference for the amount of movement. • You can play back the recorded stop motion images by pressing [ recording. Press [ ] to delete unnecessary images. To return to the recording screen, press [ 6 ] again. Stop recording.
6. Drive/Shutter/Image Stabilizer – Recording with Stop Motion Animation 7 Create a video. (Time Lapse Shot/Stop Motion Animation Videos: 226) • After the recording has stopped, select [Yes] on the confirmation screen to proceed to create a video. Even if you select [No], you can still create a video with [Stop Motion Video] in the [Playback] ([Process Image]) menu. ([Stop Motion Video]: 604) • Up to 9999 frames can be recorded.
6. Drive/Shutter/Image Stabilizer – Time Lapse Shot/Stop Motion Animation Videos Time Lapse Shot/Stop Motion Animation Videos After performing Time Lapse Shot or stop motion recording, you can proceed to create a video. • Refer to the sections below about these recording functions.
6. Drive/Shutter/Image Stabilizer – Time Lapse Shot/Stop Motion Animation Videos 3 Select [OK]. ≥A video will be created in the [MP4] recording file format. [OK] Creates a video. [Rec Quality] Sets the video image quality. [Frame Rate] Sets the number of frames per second. The larger the number is, the smoother the video will be. [Sequence] [NORMAL]: Splices pictures together in recording order. [REVERSE]: Splices pictures together in reverse recording order.
6. Drive/Shutter/Image Stabilizer – Recording Using the Self-timer Recording Using the Self-timer 1 2 3 4 Set the drive mode dial to [ ]. Set the Self-Timer time. (Setting the Self-timer Time: 230) • When recording videos, set [Self Timer For Video] in [Self Timer Setting] of the [Video] ([Others (Video)]) menu to [ON]. Close the menu. ≥Press the shutter button halfway. Decide on the composition and then adjust the focus. ≥Press the shutter button halfway.
6. Drive/Shutter/Image Stabilizer – Recording Using the Self-timer 5 Start recording. ≥Press the shutter button (A) or video rec. button (B). ≥After the self-timer light blinks, recording starts.
6. Drive/Shutter/Image Stabilizer – Recording Using the Self-timer Setting the Self-timer Time When taking pictures [ ][ ] Select [Self Timer] When recording videos [ ][ ] Select [Self Timer Setting] [ ]/[ [ ]: Takes a picture after 10 seconds. ]/[ ]/[ ] etc. (Custom) [ ]: Takes 3 pictures at approx. 2 second intervals after 10 seconds. (When recording video, it will be the same operation with [Self Timer]*1 [ ].) [ ]: Takes a picture after 2 seconds.
6. Drive/Shutter/Image Stabilizer – Recording Using the Self-timer • We recommend using a tripod when recording with the self-timer.
6. Drive/Shutter/Image Stabilizer – Bracket Recording Bracket Recording When the shutter button is pressed, the camera can record multiple images while automatically changing the setting value for exposure, aperture, focus or white balance (adjustment value or color temperature).
6. Drive/Shutter/Image Stabilizer – Bracket Recording 2 Set [More Settings]. 3 Close the menu. 4 Focus on the subject and then take pictures. ≥For information about [More Settings], refer to page for each bracketing method. ≥Press the shutter button halfway.
6. Drive/Shutter/Image Stabilizer – Bracket Recording Setting Items ([Bracketing Type]) When the shutter button is pressed, the camera [ ] Exposure Bracket records while changing the exposure. ([More Settings] (Exposure Bracket): 236) When the shutter button is pressed, the camera [ ] Aperture Bracket records while changing the aperture value. ([More Settings] (Aperture Bracket): 237) When the shutter button is pressed, the camera [ ] Focus Bracket records while changing the focus point.
6. Drive/Shutter/Image Stabilizer – Bracket Recording • White Balance Bracket and White Balance Bracket (Color Temperature) are not available when using the following functions: – [iA] mode – Taking burst pictures – [RAWiFINE]/[RAWiSTD.
6. Drive/Shutter/Image Stabilizer – Bracket Recording [More Settings] (Exposure Bracket) Sets the image count and exposure compensation step. [Step] [3•1/3] (record 3 images in 1/3 EV steps) to [7•1] (record 7 images in 1 EV steps) [Sequence] Sets the order in which images are recorded. [ ]: Takes only one image each time the shutter button is pressed. [Single Shot Setting] [ ]: Takes all of the set number of images when the shutter button is pressed once.
6. Drive/Shutter/Image Stabilizer – Bracket Recording [More Settings] (Aperture Bracket) [3]/[5]: Records the set number of images while alternately [Image Count] setting the aperture value in the sequence of one before and then one after using the initial aperture value as the reference. [ALL]: Records images using all aperture values. Example when the initial position is set to F8.0 (H-ES12060) (6) (4) (2) (1) (3) (5) (7) 2.8 4.0 5.6 8.
6. Drive/Shutter/Image Stabilizer – Bracket Recording [More Settings] (Focus Bracket) Sets the focus adjustment step. • The distance that the focus point is moved becomes shorter if [Step] the initial focus point is close, and longer if it is far away. Sets the image count. [Image Count] • This cannot be set when taking burst pictures. Burst pictures are taken while the shutter button is pressed.
6. Drive/Shutter/Image Stabilizer – Bracket Recording [More Settings] (White Balance Bracket) 1 Rotate , or to set the correction step and then press or . Horizontal direction ([A] - [B]) Vertical direction ([G] - [M]) • The correction step can also be set by touching [ ]/[ ]/[ ]/[ ]. [More Settings] (White Balance Bracket (Color Temperature)) 1 Rotate , or to set the correction step and then press • The correction step can also be set by touching [ 239 ]/[ ]. or .
6. Drive/Shutter/Image Stabilizer – [Silent Mode] [Silent Mode] This disables all operation sounds and light output at once. The audio from the speaker will be muted and the flash and the AF assist light will be set to forced off mode. • The following settings are fixed: – [Flash Mode]: [ ] (Forced Flash Off) – [AF Assist Light]: [OFF] – [Shutter Type]: [ELEC.
6. Drive/Shutter/Image Stabilizer – [Shutter Type] [Shutter Type] Selects the shutter type to use for taking pictures. [ ][ [AUTO] [MECH.] [EFC] [ELEC.] ] Select [Shutter Type] Switches the shutter type automatically depending on the recording conditions and shutter speed. Records with the mechanical shutter type. Records with the electronic front curtain type. Records with the electronic shutter type. Records with the electronic shutter type. [ELEC.
6. Drive/Shutter/Image Stabilizer – [Shutter Type] Mechanical Electronic front Electronic shutter shutter type curtain type type This type starts and Mechanism ends exposure with the mechanical shutter. Flash This type starts exposure This type starts and electronically and ends exposure ends it with the electronically. mechanical shutter. — [B] (Bulb, max. [B] (Bulb, max. [B] (Bulb, max. Shutter speed approx. approx. approx. (sec.
6. Drive/Shutter/Image Stabilizer – [Shutter Type] • To reduce shutter-induced blur, you can set the shutter to release a few seconds after the shutter button is pressed: [ ][ • When [ ] [Shutter Delay] ([Shutter Delay]: 530) ] is displayed on the screen, recording will be with the electronic shutter type. • When a moving subject is recorded using the electronic shutter, the subject may appear distorted in the picture.
6. Drive/Shutter/Image Stabilizer – Image Stabilizer Image Stabilizer ≥ Image Stabilizer Settings: 247 This camera can use both the in-body image stabilizer and the in-lens image stabilizer. Compatible with the Dual I.S. method, which effectively combines two image stabilizers, and the Dual I.S.2 method, which has a higher stabilizing effect. Furthermore, during video recording, you can use the 5-Axis Hybrid Image Stabilizer that incorporates electronic stabilization.
6. Drive/Shutter/Image Stabilizer – Image Stabilizer Combinations of lenses and image stabilizers (As of May 2021) Image stabilizers that can be used will differ depending on the attached lens. Available image Attached lens stabilizer Example of icon Panasonic lenses compatible with Dual I.S. Mode (Based on the Micro Four Thirds System standard) • If the [ ] or [ ] icon is not displayed on the recording screen even when a BodyrLens (Dual I.S./Dual I.S.
6. Drive/Shutter/Image Stabilizer – Image Stabilizer Using the Image Stabilizer • When using a lens with an O.I.S. switch, set the switch on the lens to [ON]. • When using a lens that does not have a communication function with this camera, after turning on the camera, a message asking for confirmation of the lens information is displayed. Correctly operating the image stabilization function requires that the focal length and lens name be set to match the attached lens.
6. Drive/Shutter/Image Stabilizer – Image Stabilizer Image Stabilizer Settings Set the image stabilizer operation to match the recording situation. [ ][ [Operation Mode] ] Select [Image Stabilizer] Sets the stabilization movement (blur) to match the recording method (normal, panning).
6. Drive/Shutter/Image Stabilizer – Image Stabilizer • When the following functions are being used, [E-Stabilization (Video)] is not available: – [Variable Frame Rate] – [Live Cropping] [Operation Mode] Set the stabilization movement (blur) to match the recording method (normal, panning). Corrects vertical, horizontal, and rotational camera [Normal] shake. This function is suitable for normal recording. [Panning (Left/ Corrects vertical camera shake. Right)] This is suitable for horizontal panning.
6. Drive/Shutter/Image Stabilizer – Image Stabilizer [Boost I.S. (Video)] Increase the effectiveness of the image stabilizer during video recording. This effect can help provide a stable composition when you want to perform recording from a fixed perspective. Settings: [ON]/[OFF] • When [Boost I.S. (Video)] is operating, [ ] is displayed on the recording screen. • To change composition while recording, first set this to [OFF] before moving the camera.
6. Drive/Shutter/Image Stabilizer – Image Stabilizer [Lens Information] Register the information for lenses that cannot communicate with the camera. Match the in-body image stabilizer with the information of the lens you register. 1 Press 34 to select the lens information to use and then press or . • In the default setting, the lens information for 6 lenses with a focal length of between 24 mm and 135 mm is registered. The lens information for up to 12 lenses can be registered.
6. Drive/Shutter/Image Stabilizer – Image Stabilizer Registering, modifying, and deleting lens information 1 Press 34 to select the lens information and then press [DISP.]. • If lens information that has not been registered is selected, press or to proceed to Step 3. 2 Press 34 to select [Edit] or [Delete] and then press or . • The lens information is deleted when you select [Delete]. • You cannot delete the lens information for a lens that is being used. 3 Enter the lens Information.
7.
7. Metering/Exposure/ISO Sensitivity – [Metering Mode] [Metering Mode] Type of optical measurement to measure brightness can be changed. [ ][ ] Select [Metering Mode] Method in which the most suitable exposure is [ ] (Multi-metering) measured by judging the allocation of brightness on the whole screen. [ ] (Center-weighted) Method used to perform measuring which focuses on the center of the screen. Method used to measure the extremely small part around the spot-metering target (A).
7. Metering/Exposure/ISO Sensitivity – Program AE Mode Program AE Mode In [P] mode (Program AE mode), the camera automatically sets the shutter speed and aperture value for the brightness of the subject. You can also use Program Shift to change combinations of shutter speed and aperture values while keeping the same exposure. 1 Set the mode dial to [P].
7. Metering/Exposure/ISO Sensitivity – Program AE Mode 2 Press the shutter button halfway. ≥This displays the aperture value and shutter speed value on the recording screen. • If the correct exposure is not achieved, the aperture value and shutter speed 3 blink red. Start recording.
7. Metering/Exposure/ISO Sensitivity – Program AE Mode Program Shift You can change the shutter speed and aperture value combination set automatically by the camera while maintaining the same exposure. With this, you can, for example, make the background more defocused by decreasing the aperture value or capture a moving subject more dynamically by slowing the shutter speed. 1 Press the shutter button halfway. • This displays the aperture value and shutter speed value on the recording screen. (Approx.
7. Metering/Exposure/ISO Sensitivity – Program AE Mode • Program Shift is not available when using the following functions: – Flash – [6K/4K PHOTO]/[Post-Focus] • You can customize dial operations: [ ][ ] [Dial Set.] [Assign Dial (F/SS)]/[Rotation (F/SS)] ([Dial Set.]: 563) • The recording screen can display an exposure meter indicating the relationship between aperture value and shutter speed: [ ][ ] [Expo.Meter] ([Expo.
7. Metering/Exposure/ISO Sensitivity – Aperture-Priority AE Mode Aperture-Priority AE Mode In [A] mode (Aperture-Priority AE mode), you can set the aperture value before recording. The shutter speed will be automatically set by the camera. Smaller aperture values It becomes easier to defocus the background. Larger aperture values It becomes easier to bring everything into focus including the background.
7. Metering/Exposure/ISO Sensitivity – Aperture-Priority AE Mode 1 Set the mode dial to [A]. 2 Set the aperture value. 3 Start recording. ≥Rotate or . • If the correct exposure is not achieved when the shutter button is pressed halfway, the aperture value and the shutter speed blink red.
7. Metering/Exposure/ISO Sensitivity – Aperture-Priority AE Mode Depth of Field Characteristics Aperture value Small Large Focal length of lens Telephoto Wide-angle Near More distant Distance to subject Shallow (narrow) Depth of field (area in sharp focus) Deep (wide) Example: When you want Example: When you want to take a image with a to take a image with focus defocused background. as far as the background.
7. Metering/Exposure/ISO Sensitivity – Shutter-Priority AE Mode Shutter-Priority AE Mode In [S] mode (Shutter-Priority AE mode), you can set the shutter speed before recording. The aperture value will be automatically set by the camera. Slower shutter speeds It becomes easier to capture motion. Faster shutter speeds It becomes easier to freeze motion.
7. Metering/Exposure/ISO Sensitivity – Shutter-Priority AE Mode 1 Set the mode dial to [S]. 2 Set the shutter speed. 3 Start recording. ≥Rotate or . • If the correct exposure is not achieved when the shutter button is pressed halfway, the aperture value and the shutter speed blink red.
7. Metering/Exposure/ISO Sensitivity – Shutter-Priority AE Mode • The effects of the set aperture value and shutter speed will not be visible on the recording screen. To check the effects on the recording screen, use [Preview]. (Preview Mode: 268) • The brightness of the recording screen and of actual recorded images may differ. Check the images on the playback screen. • Shutter speeds faster than 1/250 of a second are not available when recording using a flash.
7. Metering/Exposure/ISO Sensitivity – Manual Exposure Mode Manual Exposure Mode In [M] mode (Manual Exposure mode), you can take pictures by manually setting the aperture value and shutter speed. In default settings, the ISO sensitivity is set to [AUTO]. As a result, the ISO sensitivity will be adjusted according to the aperture value and shutter speed. Exposure compensation can also be used when ISO sensitivity is set to [AUTO]. 1 Set the mode dial to [M].
7. Metering/Exposure/ISO Sensitivity – Manual Exposure Mode 2 Set the aperture value and shutter speed. 3 Start recording. ≥Rotate speed. to set the aperture value, and to set the shutter (A) (B) (A) Shutter speed (B) Aperture value • If the correct exposure is not achieved when the shutter button is pressed halfway, the aperture value and the shutter speed blink red. Available Shutter Speeds (Sec.) • [MECH.] [B] (Bulb, max. approx. 30 minutes), 60 to 1/8000 • [EFC] [B] (Bulb, max. approx.
7. Metering/Exposure/ISO Sensitivity – Manual Exposure Mode • The effects of the set aperture value and shutter speed will not be visible on the recording screen. To check the effects on the recording screen, use [Preview].
7. Metering/Exposure/ISO Sensitivity – Manual Exposure Mode Manual Exposure Assist When ISO sensitivity is set to other than [AUTO], Manual Exposure Assist (example: ) will be displayed on the recording screen. You can check the difference between the current exposure value and the standard exposure (n0) measured by the camera. • Use Manual Exposure Assist as a guide. We recommend checking the images on the playback screen when recording.
7. Metering/Exposure/ISO Sensitivity – Preview Mode Preview Mode You can check the effects of aperture on the recording screen by physically closing the aperture blades of the lens to the aperture value set for actual recording. In addition to the effects of aperture, you can check the effects of shutter speed at the same time. • Use the Fn button registered with [Preview] to operate. In default settings, this is registered in the [Fn2] button.
7. Metering/Exposure/ISO Sensitivity – Preview Mode • It is possible to record in preview mode. • Range for shutter speed effect check is 8 seconds to 1/16000 of a second. • Preview mode is not available when recording with [6K/4K Pre-Burst]. • Depending on the [Constant Preview] setting, there are preview screens that cannot be displayed.
7. Metering/Exposure/ISO Sensitivity – Exposure Compensation Exposure Compensation You can compensate the exposure when the standard exposure determined by the camera is too bright or too dark. You can adjust the exposure in 1/3 EV steps in a range of n5 EV. When recording videos or recording with 6K/4K photo or Post-Focus, the range changes to n3 EV. 1 Press [ 2 Compensate the exposure. ≥Rotate ]. , , or .
7. Metering/Exposure/ISO Sensitivity – Exposure Compensation 3 Confirm your selection. ≥Press the shutter button halfway. • In [M] mode, you can compensate the exposure by setting the ISO sensitivity to [AUTO]. • When the exposure compensation value falls below or exceeds n3 EV, the brightness of the recording screen will no longer change. Press the shutter button halfway or use AE Lock to reflect the value on the recording screen.
7. Metering/Exposure/ISO Sensitivity – Locking Focus and Exposure (AF/AE Lock) Locking Focus and Exposure (AF/AE Lock) Lock the focus and exposure in advance to take pictures with the same focus and exposure settings while changing the composition. This is useful when you want to bring an edge of the screen into focus or there is a backlight, for example. 1 Register [AE LOCK], [AF LOCK], or [AF/AE LOCK] to the Fn button. (Fn Buttons: 472) • These cannot be registered to [Fn3] to [Fn7].
7. Metering/Exposure/ISO Sensitivity – Locking Focus and Exposure (AF/AE Lock) 2 Lock focus and exposure. ≥Press and hold the Fn button. ≥If focus is locked, then the AF lock icon will be displayed. ≥If exposure is locked, then the AE lock icon will be displayed. (B) (A) (A) AF lock icon (AFL) (B) AE lock icon (AEL) 3 Hold the Fn button to decide on the composition and then perform recording. ≥Press the shutter button fully.
7. Metering/Exposure/ISO Sensitivity – ISO Sensitivity ISO Sensitivity You can set light sensitivity (ISO sensitivity). With the default settings, you can set 200 to 25600 in 1/3 EV increments. 1 Press [ISO]. 2 2 Select ISO sensitivity. ≥Rotate , , or . ≥Selection is also possible by pressing [ISO].
7. Metering/Exposure/ISO Sensitivity – ISO Sensitivity 3 Confirm your selection. ≥Press the shutter button halfway. Characteristics of the ISO Sensitivity By increasing the ISO sensitivity, the shutter speed can be increased in dark places to prevent camera shake and subject blur. However, higher ISO sensitivities also increase the amount of noise in the recorded images.
7. Metering/Exposure/ISO Sensitivity – ISO Sensitivity Setting Items (ISO Sensitivity) The ISO sensitivity is automatically adjusted according to the [AUTO] brightness. • Taking picture: Maximum [3200]*1 • Video recording: Maximum [6400]*2 The ISO sensitivity is fixed at the selected value. [200] to [25600] • You can extend the ISO sensitivity lower limit to [100] by setting [Extended ISO] ([Extended ISO]: 551) to [ON] in the [Custom] ([Image Quality]) menu. *1 Default setting.
7.
8.
8. White Balance/Image Quality – White Balance (WB) White Balance (WB) ≥ Adjusting the White Balance: 284 White balance (WB) is a function that corrects the color cast produced by the light illuminating the subject. It corrects the colors so that white objects appear in white to make the overall color closer to what is seen by the eye. Normally, you can use auto ([AWB], [AWBc] or [AWBw]) to obtain the optimal white balance.
8. White Balance/Image Quality – White Balance (WB) 2 Select the white balance. 3 Confirm your selection. ≥Rotate , or . ≥Selection is also possible by pressing [WB]. ≥Press the shutter button halfway.
8.
8. White Balance/Image Quality – White Balance (WB) (2) (3) (4) (5) (6) (1) (7) (8) (9) KlKelvin Color Temperature (1) [AWB] will work within this range. (2) Blue sky (3) Cloudy sky (Rain) (4) Shade (5) Sunlight (6) White fluorescent light (7) Incandescent light bulb (8) Sunrise and sunset (9) Candlelight • Under lighting such as fluorescent or LED lighting, the appropriate white balance will vary depending on the lighting type. Use [AWB], [AWBc], [AWBw] or [ 1 ] to [ 4 ].
8. White Balance/Image Quality – White Balance (WB) Registering the White Set Take pictures of a white object under the light source of the recording location to adjust the white balance until it appears white. 1 Press [WB] and then select any value from [ 2 Press 3. 3 Aim the camera at a white object so that it appears inside the frame at the center of the screen and then press or ] to [ 1 4 ]. . • This will set the white balance and return you to the recording screen.
8. White Balance/Image Quality – White Balance (WB) Adjusting the White Balance You can adjust the coloring even when the coloring you want to apply is not produced by the selected white balance. 1 Press [WB]. 2 Select the white balance and then press 4. ≥The adjustment screen is displayed.
8. White Balance/Image Quality – White Balance (WB) 3 Adjust the coloring. 2: [A] (AMBER: ORANGE) 3: [G] (GREEN: GREENISH) 1: [B] (BLUE: BLUISH) 4: [M] (MAGENTA: REDDISH) • You can also touch the graph to make adjustments. • Press [DISP.] to return to the unadjusted state. • You can set the White Balance Bracket by rotating , or . ([More Settings] (White Balance Bracket): 239) 4 Confirm your selection. ≥Press the shutter button halfway.
8. White Balance/Image Quality – [Photo Style] [Photo Style] You can select the finishing settings of images to suit your subjects and expression styles. The image quality can be adjusted for each Photo Style. [ ][ ] Select [Photo Style] ≥ You can also display the setting screen of [Photo Style] by pressing [ [Standard] [Vivid] [Natural] [L.ClassicNeo] [Flat] [Landscape] [Portrait] [Monochrome] The standard setting. A setting that produces a more vivid quality with higher saturation and contrast.
8. White Balance/Image Quality – [Photo Style] [L.Monochrome] A black-and-white setting with rich gradation and crisp black accents. A monochrome setting that creates a [L.Monochrome D] dynamic impression with enhanced highlights and shadows. [L.Monochrome S] A setting for a black and white effect with a gentle touch suited to portraits. A setting that creates a film-like finishing touch using a gamma curve and gives priority [Cinelike D2] to the dynamic range.
8. White Balance/Image Quality – [Photo Style] Adjusts the image quality of Photo Style items [MY PHOTO STYLE 1]*1 to to your preferred settings and registers these [MY PHOTO STYLE 10]*1 as My Photo Style items. (Registering Settings in My Photo Style: 293) *1 Effects up to [MY PHOTO STYLE 4] are displayed with the default settings. You can set the items to display in the menu with [Show/Hide Photo Style] in [Photo Style Settings].
8. White Balance/Image Quality – [Photo Style] Adjusting Image Quality 1 Press 21 to select the type of Photo Style. 2 Press 34 to select an item and then press 21 to adjust. • Adjusted items are indicated with [¢]. 6WDQGDUG -5 3 Press 0 or +5 ±0 ±0 ±0 ±0 ±0 . • When the image quality is adjusted, the Photo Style icon on the recording screen is indicated with [¢].
8. White Balance/Image Quality – [Photo Style] Settings Items (Image Quality Adjustment) [Contrast] Adjusts the contrast in the image. [Highlight] Adjusts the brightness of bright areas. [Shadow] Adjusts the brightness of dark areas. [Saturation] Adjusts the vividness of colors. [Color Tone] Adjusts blue and yellow tints. Assuming that the reference point is red, this rotates the [Hue] hue toward violet/magenta or yellow/green to adjust the coloring of the entire image.
8. White Balance/Image Quality – [Photo Style] Adjusts the noise reduction effect. [Noise Reduction] [Sensitivity]*1 • Increasing the effect may cause a slight drop in picture resolution. Sets the ISO sensitivity. (ISO Sensitivity: 274) Sets the white balance. (White Balance (WB): 279) • While [WB] is selected, press [ [White Balance]*1 ] to display the white balance setting screen. Press [ ] again to return to the original screen.
8. White Balance/Image Quality – [Photo Style] • The items that you can adjust the image quality for depend on the Photo Style type. ([Saturation]) ([Color Tone]) — — — — — — — — — — — — — — — — — — — — — — — — — S *2 *2 Can be set when [Grain Effect] is one of [Low], [Standard], or [High]. • The effects of [Grain Effect] and [Color Noise] cannot be checked on the recording screen.
8. White Balance/Image Quality – [Photo Style] Registering Settings in My Photo Style 1 Press 21 to select the type of Photo Style. 2 Adjust the image quality. • My Photo Style displays the types of Photo Style at the top of image quality adjustment. Select the base Photo Style. 3 Press [DISP.]. 4 (When [MY PHOTO STYLE 1] to [MY PHOTO STYLE 10] is selected) Press 34 to select [Save Current Setting] and then press 5 or .
8. White Balance/Image Quality – [Filter Settings] [Filter Settings] ≥ [Simultaneous Record w/o Filter]: 303 This mode records with additional image effects (filters). You can adjust the effect for each filter. In addition, you can simultaneously take pictures without effects. 1 Set the [Filter Effect].
8. White Balance/Image Quality – [Filter Settings] 2 Select the filter. ≥Press 34 to select, and then press or . ≥You can also select the image effect (filter) by touching the sample picture. • Press [DISP.] to switch the screen in the order of normal display, guide display, and list display. The guide display shows the description of each filter.
8. White Balance/Image Quality – [Filter Settings] Adjusting the Filter Effect You can adjust the filter effect. 1 Select the filter. 2 On the recording screen, press [WB]. 3 Rotate , or to set. • To return to the recording screen, press [WB] again. • When the filter effect is adjusted, the filter icon on the recording screen is indicated with [¢].
8.
8. White Balance/Image Quality – [Filter Settings] Setting a Filter with Touch Operation • The default settings are for the Touch Tab to not be displayed. Set [Touch Tab] to [ON] in [Touch Settings] in the [Custom] ([Operation]) menu. ([Touch Settings]: 560) 1 Touch [ 2 Touch the item to set. ].
8. White Balance/Image Quality – [Filter Settings] • White balance will be fixed to [AWB] and the flash will be fixed to [ ] (Forced Flash Off). • The upper limit to ISO sensitivity is [3200]. • When [High Dynamic] is set, the ISO sensitivity is fixed to [AUTO]. • Depending on the filter, the recording screen may seem as if frames are missed.
8. White Balance/Image Quality – [Filter Settings] Setting the Type of Defocus ([Miniature Effect]) 1 Set [Filter Effect] to [Miniature Effect]. 2 Press 3 to display the setting screen. 3 Press 34 or 21 to move the in-focus portion. • The setting screen can also be displayed by touching [ ] then [ ]. • You can also move the in-focus portion by touching the screen. • You can also switch the defocus orientation by touching [ ]. 4 Rotate , or to change the size of in-focus portion.
8. White Balance/Image Quality – [Filter Settings] Setting the Color to Be Left ([One Point Color]) 1 Set [Filter Effect] to [One Point Color]. 2 Press 3 to display the setting screen. 3 Press 3421 to move the frame and select the color you want to leave. • The setting screen can also be displayed by touching [ ] then [ ]. • You can also select the color you want to leave by touching the screen. • To return the frame back to the center, press [DISP.]. 4 Press or to set.
8. White Balance/Image Quality – [Filter Settings] Setting the Light Source Position and Size ([Sunshine]) 1 Set [Filter Effect] to [Sunshine]. 2 Press 3 to display the setting screen. 3 Press 3421 to move the center position of the light source. • The setting screen can also be displayed by touching [ ] then [ ]. • The position of the light source can also be moved by touching the screen. 4 Rotate , or to adjust the size of the light source.
8. White Balance/Image Quality – [Filter Settings] [Simultaneous Record w/o Filter] You can simultaneously take pictures with no added filter effects. [ ][ ] [Filter Settings] Select [Simultaneous Record w/o Filter] Settings: [ON]/[OFF] • [Simultaneous Record w/o Filter] is not available when using the following functions: – Burst recording – [6K/4K PHOTO]/[Post-Focus] – [Time Lapse Shot] – [Stop Motion Animation] – [RAWiFINE]/[RAWiSTD.
9.
9. Flash – Using an External Flash (Optional) Using an External Flash (Optional) ≥ Removing the Hot Shoe Cover: 306 If you attach the Flash (DMW-FL580L/DMW-FL360L/DMW-FL200L: optional) to the hot shoe, you can record using the flash. You can also use a commercially available external flash by connecting a synchro cable to the flash synchro socket.
9. Flash – Using an External Flash (Optional) Removing the Hot Shoe Cover Before attaching the Flash (optional), remove the hot shoe cover. Refer to the operating instructions for the Flash for details about how to attach it. 1 Remove the hot shoe cover by pulling it in the direction indicated by arrow (2) while pressing it in the direction indicated by arrow (1).
9. Flash – Using an External Flash (Optional) Connecting a Synchro Cable to the Flash Synchro Socket You can use a commercially available external flash by connecting a synchro cable to the flash synchro socket. • Use an external flash with a synchronization voltage of 400 V or less. • Do not use the synchro cables with the length of 3 m (9.8 feet) or more. 1 Rotate the flash synchro socket cap in the direction of the arrow to remove. • Be careful not to lose the flash synchro socket cap.
9. Flash – Using an External Flash (Optional) Notes on Flash Recording • Do not bring any object near the flash. Heat or light may cause the object to deform or discolor. • If you record repeatedly, time may be needed to charge the flash. While the flash is charging, images will be recorded without the flash firing. • When an external flash is attached, do not carry the camera by holding only the external flash. It may become detached.
9. Flash – Setting Flash Setting Flash ≥ [Flash Mode]: 310 ≥ [Firing Mode]/[Manual Flash Adjust.]: 312 ≥ [Flash Adjust.]: 314 ≥ [Flash Synchro]: 316 ≥ [Auto Exposure Comp.]: 317 You can set the flash function to control flash firing from the camera.
9. Flash – Setting Flash [Flash Mode] Sets the flash mode. 1 [ ][ ] Select [Flash Mode] [ ] (Forced Flash On)/[ ] (Forced On/Red-Eye) The flash fires every time regardless of the recording conditions. This is suitable for recording when there is backlighting or under lighting such as fluorescent lighting. [ ] (Slow Sync.)/[ ] (Slow Sync.
9. Flash – Setting Flash • The flash fires twice. The interval between the first and second firings is longer when [ ] or [ ] is set. The subject should not move until the second firing has finished. •[ ] and [ ] cannot be used when the following are set: – [Firing Mode]: [MANUAL] – [Flash Synchro]: [2ND] – [Wireless]: [ON] • Some flash modes may not be available depending on the settings on the external flash. • The effectiveness of red-eye reduction varies from person to person.
9. Flash – Setting Flash Shutter Speeds for Flash Modes ]: 1/60 of a second*1 to 1/250 of a second ]: 1 second to 1/250 of a second [ ]/[ [ ]/[ *1 In [S] mode, this will be 60 seconds and in [M] mode it will be [B] (Bulb). [Firing Mode]/[Manual Flash Adjust.] You can select whether to set the flash output automatically or manually. • The settings made here are enabled when some flashes from other manufacturers are attached.
9. Flash – Setting Flash [MANUAL] Sets the flash output manually. • With [TTL], you can record the images you want even when recording dark scenes where the flash output tends to become greater. • The flash output ([1/1], etc.) is displayed on the flash icon of the recording screen. 2 3 (When set to [MANUAL]) Select [Manual Flash Adjust.] and then press or . Press 21 to set the flash output and then press . or • It can be set within the range of [1/1] (full flash output) to [1/128] in 1/3 steps.
9. Flash – Setting Flash [Flash Adjust.] You can adjust the flash output when taking pictures with the flash in TTL output mode. 1 2 Select [Flash Adjust.]. ≥ [ ][ ] [Flash Adjust.] Press 21 to adjust the flash output and then press or . • It can be adjusted within the range of [j3 EV] to [i3 EV] in 1/3 EV steps.
9. Flash – Setting Flash • [ ] is displayed on the recording screen. • For information about adjusting the flash output when recording using a wireless flash ([Flash Adjust.]: 322) • [Flash Adjust.
9. Flash – Setting Flash [Flash Synchro] When a moving subject is recorded at night using a slow shutter and flash, a trail of light may appear in front of the subject. If you set [Flash Synchro] to [2ND], you can take a dynamic picture with a trail of light appearing behind the subject by firing the flash immediately before the shutter closes. 1 [ ][ ] Select [Flash Synchro] [1ST] This is the normal method for recording with the Flash.
9. Flash – Setting Flash • When [2ND] is set, [2nd] is displayed on the flash icon of the recording screen. • When [Wireless] is set to [ON], this is fixed to [1ST]. • The effect may not be adequately achieved at faster shutter speeds. [Auto Exposure Comp.] Automatically adjust the flash output in conjunction with the exposure compensation value. (Exposure Compensation: 270) 1 [ ][ ] Select [Auto Exposure Comp.
9. Flash – Recording Using a Wireless Flash Recording Using a Wireless Flash You can use a Flash (DMW-FL580L/DMW-FL360L/DMW-FL200L: optional) to record using a wireless flash. You can separately control the firing of three flash groups and the flash attached to the hot shoe of the camera.
9. Flash – Recording Using a Wireless Flash Placing a Wireless Flash Place the wireless flash with its wireless sensor facing the camera. Placement example When (C) is placed to erase the shadow in the background of the subject that the flash groups (A) and (B) will create (C) (A) (B) Placement range When DMW-FL360L is attached (E) (D) (E) (D) (D) 5.0 m (16 feet) (E) 7.
9. Flash – Recording Using a Wireless Flash • The placement range serves as a guide for when recording with the camera held horizontally. The range differs depending on the surrounding environment. • We recommend using a maximum of three wireless flashes in each group. • If the subject is too close, communication light may affect the exposure. You can reduce the effect by setting [Communication Light] to [LOW] or lowering the output with a diffuser or similar device.
9. Flash – Recording Using a Wireless Flash 3 Enable the wireless flash function of the camera. 4 Set [Wireless Channel]. 5 Set [Wireless Setup]. ≥ [ ][ ] [Wireless] [ON] • Select the same channel as on the wireless flash side. • Set the firing mode and flash output.
9. Flash – Recording Using a Wireless Flash Setting Items ([Wireless Setup]) • To fire a test flash, press [DISP.]. [TTL]: The camera automatically sets the flash output. [AUTO]*2: Sets the flash output on the [Firing Mode] external flash side. [MANUAL]: Sets the flash output of the external flash manually. [OFF]: The external flash outputs only [External communication light. Flash]*1 [Flash Adjust.] Adjusts the flash output of the external flash manually when [Firing Mode] is set to [TTL].
9. Flash – Recording Using a Wireless Flash [TTL]: The camera automatically sets the flash output. [AUTO]*1: Sets the flash output on the [Firing Mode] wireless flash side. [MANUAL]: Sets the flash output of the wireless flash manually. [A Group]/ [OFF]: The wireless flashes of the specified [B Group]/ group will not fire. [C Group] [Flash Adjust.] Adjusts the flash output of the wireless flash manually when [Firing Mode] is set to [TTL].
9. Flash – Recording Using a Wireless Flash [Wireless FP] The external flash performs FP firing (repeated high-speed firing of the flash) during wireless recording, enabling recording using the Flash even at fast shutter speeds. [ ][ ] Select [Wireless FP] Settings: [ON]/[OFF] [Communication Light] Set the strength of communication light.
10.
10. Recording Videos – Recording Videos Recording Videos ≥ Recording Videos: 326 It is possible to record video with a maximum resolution of 6K-A (4992k3744) on this camera. It also supports switching of the system frequency and 2 types of recording file format; MP4, and MOV. In the [ ] mode (Creative Video mode), which is specifically for video recording, you can use all of the video functions. Recording Videos 1 Start recording. 2 Stop recording. ≥Press the video rec. button.
10. Recording Videos – Recording Videos Screen Displays While Video Recording The live view angle of view changes to the angle of view for video recording, and video recording time (A) and elapsed recording time (B) are displayed. • “h” is an abbreviation for hour, “m” for minute and “s” for second. • The recording state indication (C) and card access indication (D) turn red while videos are being recorded.
10. Recording Videos – Recording Videos Exposure Control While Video Recording Videos will be recorded using the aperture, shutter speed, and ISO sensitivity settings below. Recording mode Aperture value/shutter speed/ISO sensitivity The camera automatically makes the settings to suit the scene. [iA] (Types of Automatic Scene Detection: 104) The settings vary depending on the [Auto Exposure in P/A/S/M] in the [Custom] ([Image Quality]) menu. The default setting is [P]/[A]/[S]/[M] [ON].
10. Recording Videos – Recording Videos Size Interval for Dividing Files [Rec. File Format] [Rec Quality] Size interval for dividing files A new file will be created to continue [FHD] recording if the continuous recording time exceeds 30 minutes or the file size exceeds 4 GB. [MP4] When using an SDHC memory card: A new file will be created to continue [4K] recording if the continuous recording time exceeds 30 minutes or the file size exceeds 4 GB.
10. Recording Videos – Recording Videos • If an operation such as a zoom or button operation is performed during video recording, that operation sound may be recorded. • The lens operation sound (AF and image stabilizer) may be recorded to video. • If the operation sound of pressing the video rec. button or sub video rec.
10. Recording Videos – Creative Video Mode Creative Video Mode ≥ Setting the Exposure for Recording Videos: 332 ≥ Separating Settings for Recording Video and Pictures: 335 The [ ] mode (Creative Video mode) is a recording mode specifically for video recording in which you can use all video functions. In the recording modes specifically for video, you can start and stop video recording with the shutter button.
10. Recording Videos – Creative Video Mode Setting the Exposure for Recording Videos 1 Set the mode dial to [ 2 Set the exposure mode. 3 Close the menu. ]. ≥ [ ][ ] [Exposure Mode] [P]/[A]/[S]/[M] • You can perform the same exposure operations as the [P]/[A]/[S]/[M] modes. ≥Press the shutter button halfway.
10. Recording Videos – Creative Video Mode 4 Start recording. ≥Press the shutter button (A) or video rec. button (B). (A) (B) 5 Stop recording. ≥Press the shutter button or video rec. button again.
10. Recording Videos – Creative Video Mode Operations During Video Recording Change the exposure and audio settings with touch operation to prevent operation sounds from being recorded. • With the default settings, the Touch Tab is not displayed. Set [Touch Tab] to [ON] in [Touch Settings] in the [Custom] ([Operation]) menu. ([Touch Settings]: 560) 1 Touch [ 2 Touch an icon. ].
10. Recording Videos – Creative Video Mode Separating Settings for Recording Video and Pictures In default settings, settings such as exposure and white balance changed in [ ] mode are also reflected in picture recording in [P]/[A]/[S]/[M] modes. From the [CreativeVideo Combined Set.] menu, you can separate settings for video recording and for picture recording. [ ][ ] Select [CreativeVideo Combined Set.] [F/SS/ISO/Exposure Comp.
10. Recording Videos – Video Recording Settings Video Recording Settings ≥ [System Frequency]: 337 ≥ [Rec. File Format]: 338 ≥ [Rec Quality]: 339 ≥ [Image Area of Video]: 349 This section describes the settings used when video recording. • In “4. Image Recording”, the functions described work with both pictures and video. Please also refer to that section.
10. Recording Videos – Video Recording Settings [System Frequency] This changes the system frequency of videos that are recorded and played back with the camera. The default setting is for the system frequency to be set to the TV broadcast system for the region where the camera was bought. [ ][ ] Select [System Frequency] [59.94Hz (NTSC)] [50.00Hz (PAL)] [24.
10. Recording Videos – Video Recording Settings [Rec. File Format] Sets the recording file format of videos to be recorded. [ ][ ] Select [Rec. File Format] [MP4] This file format is suitable for playback on PCs. [MOV] This file format is suitable for image editing. • When [System Frequency] is set to [24.00Hz (CINEMA)], it is fixed to [MOV].
10. Recording Videos – Video Recording Settings [Rec Quality] Sets the image quality of videos to be recorded. The image qualities you can select depend on the [System Frequency] and [Rec. File Format] settings. [Rec Quality] settings can also be made using [Filtering] ([Filtering]: 346) to display only items that meet your conditions and [add to list] ([add to list]: 347) to register recording qualities you use often.
10. Recording Videos – Video Recording Settings [Rec. File Format]: [MP4] • Image compression: Long GOP • Audio format: AAC (2ch) (A) Recording frame rate (B) Bit rate (Mbps) (C) YUV/bit (D) Video compression format (HEVC: H.265/HEVC, AVC: H.264/MPEG-4 AVC) [System Frequency]: [59.94Hz (NTSC)] [Rec Quality] Resolution (Aspect ratio) (A) (B) (C) (D) HEVC [4K/10bit/100M/60p] 59.94p 100 4:2:0/10 bit [4K/8bit/100M/30p] 29.97p 100 4:2:0/8 bit AVC 29.
10. Recording Videos – Video Recording Settings [Rec. File Format]: [MOV] • Audio format: LPCM (2ch) [System Frequency]: [59.94Hz (NTSC)] (A) Recording frame rate (B) Bit rate (Mbps) (C) YUV/bit (D) Video compression format (HEVC: H.265/HEVC, AVC: H.264/MPEG-4 AVC) (E) Image compression [Rec Quality] [6K-A/30p/420/10-L] [6K-A/24p/420/10-L] Resolution (Aspect ratio) 4992k3744 (4:3) (A) (B) 29.97p 200 4:2:0/10 bit HEVC Long GOP (C) (D) (E) 4:2:0/10 bit HEVC Long GOP 23.
10. Recording Videos – Video Recording Settings [4K/60p/420/10-L] 59.94p 200 [4K/60p/420/8-L] 59.94p 150 4:2:0/8 bit AVC [4K/30p/422/10-I] 29.97p 400 4:2:2/10 bit AVC ALL-Intra 29.97p 150 4:2:2/10 bit AVC Long GOP Long GOP [4K/30p/422/10-L] [4K/30p/420/8-L] 3840k2160 (16:9) 4:2:0/10 bit HEVC Long GOP Long GOP 29.97p 100 4:2:0/8 bit AVC [4K/24p/422/10-I] 23.98p 400 4:2:2/10 bit AVC ALL-Intra [4K/24p/422/10-L] 23.
10. Recording Videos – Video Recording Settings [System Frequency]: [50.00Hz (PAL)] (A) Recording frame rate (B) Bit rate (Mbps) (C) YUV/bit (D) Video compression format (HEVC: H.265/HEVC, AVC: H.264/MPEG-4 AVC) (E) Image compression [Rec Quality] Resolution (Aspect ratio) (A) (B) [6K-A/25p/420/10-L] 4992k3744 (4:3) (C) (D) (E) 25.00p 200 4:2:0/10 bit HEVC Long GOP [4K-A/50p/420/10-L] 50.00p 200 4:2:0/10 bit HEVC Long GOP [4K-A/50p/420/8-L] 50.00p 150 4:2:0/8 bit AVC 25.
10. Recording Videos – Video Recording Settings [FHD/50p/422/10-I] 50.00p 200 4:2:2/10 bit AVC ALL-Intra [FHD/50p/422/10-L] 50.00p 100 4:2:2/10 bit AVC Long GOP 50.00p 100 4:2:0/8 bit AVC Long GOP 25.00p 200 4:2:2/10 bit AVC ALL-Intra [FHD/25p/422/10-L] 25.00p 100 4:2:2/10 bit AVC Long GOP [FHD/25p/420/8-L] 25.00p 100 4:2:0/8 bit AVC Long GOP [FHD/50p/420/8-L] [FHD/25p/422/10-I] 1920k1080 (16:9) [System Frequency]: [24.
10. Recording Videos – Video Recording Settings • In this document, videos are indicated as follows according to their resolution: – 6K-A (4992k3744) video, 4K-A (3328k2496) video: 6K/4K Anamorphic (4:3) video – C4K (4096k2160) video: C4K video – 4K (3840k2160) video: 4K video – Full High Definition (1920k1080) video: FHD video • Since the camera employs the VBR recording format, the bit rate is changed automatically depending on the subject to record.
10. Recording Videos – Video Recording Settings [Filtering] When the [Rec. File Format] is set to [MOV], you can specify items such as frame rate, resolution, and codec (YUV, Bit value, Image compression), and just display recording quality that meets those conditions. 1 In the [Rec Quality] setting screen, press [DISP.]. 2 Press 34 to select a setting item and then press or .
10. Recording Videos – Video Recording Settings [add to list] Select a recording quality and register it in My List. The recording quality you register can be set in [Rec Quality (My List)]. 1 In the [Rec Quality] setting screen, press [Q]. • The following settings are also registered at the same time: – [System Frequency] – [Rec. File Format] – [Image Area of Video] Setting or deleting in My List 1 Select [Rec Quality (My List)].
10. Recording Videos – Video Recording Settings Display [Rec Quality (My List)] on the Control Panel You can display the My List of recording quality from the control panel in [ ] mode or when it is set to [Video-Priority Display]. 1 Display the setting screen. • Touch the recording quality item. • When already registered in My List, the [Rec Quality (My List)] setting screen is displayed. When not yet registered, the [Rec Quality] setting screen is displayed.
10. Recording Videos – Video Recording Settings [Image Area of Video] Set the image area during video recording. The angle of view differs depending on the image area. Narrowing the image area allows you to achieve a telescopic effect without image deterioration. [ ][ ] Select [Image Area of Video] Item Settings details Records according to the range that corresponds to the image [FULL] circle of the lens that is for Micro four thirds.
10. Recording Videos – Video Recording Settings Image area (Ex.: FHD video) FULL PIXEL/PIXEL • When the following functions are being used, [Image Area of Video] is fixed to [FULL].
10. Recording Videos – Time Code Time Code ≥ Setting the Time Code: 351 When video is recorded in the MOV format, the hour, minute, seconds, and number of frames information (time code) is recorded automatically. The time code is used to synchronize multiple image and audio sources. • The time code is not recorded with video in the MP4 format. Setting the Time Code Sets the recording, display, and output of the time code. 1 Set [Rec. File Format] to [MOV]. ≥ [ ][ ] [Rec.
10. Recording Videos – Time Code 2 Select [Time Code]. [ ≥ ][ ] [Time Code] [Time Code Display] Displays the time code on the recording screen/playback screen. [Count Up] [REC RUN]: Counts the time code only when recording videos. [FREE RUN]: Counts the time code also when video recording is stopped and when the camera is turned off.
10. Recording Videos – Time Code [Time Code Mode] [DF]: Drop Frame. The camera modifies the difference between recorded time and time code. • Seconds and frames are separated by “.”. (Example: 00:00:00.00) [NDF]: Non-Drop Frame. Records the time code without drop frame. • Seconds and frames are separated by “:”. (Example: 00:00:00:00) • When the following functions are being used, [Time Code Mode] is fixed to [NDF]: – [50.00Hz (PAL)]/[24.00Hz (CINEMA)] ([System Frequency]) – 23.
10. Recording Videos – Using AF (Video) Using AF (Video) ≥ [Continuous AF]: 355 ≥ [AF Custom Setting(Video)]: 356 This section describes the use of AF when video recording. • In “5. Focus/Zoom”, the functions described work with both pictures and video.
10. Recording Videos – Using AF (Video) [Continuous AF] You can select how to set the focus in AF when recording videos. [ ][ [MODE1] ] Select [Continuous AF] The camera continues to automatically focus only during recording. When recording with [ [MODE2] ] mode, the camera automatically keeps focusing on subjects during recording standby and during recording. [OFF] The camera maintains the focus point at the start of recording.
10. Recording Videos – Using AF (Video) [AF Custom Setting(Video)] You can fine-adjust the focusing method for video recording using [Continuous AF]. [ ][ ] Select [AF Custom Setting(Video)] [ON] Enables the following settings. [OFF] Disables the following settings. [AF Speed] [r] side: Focus moves at a faster speed. [s] side: Focus moves at a slower speed. [SET] [AF Sensitivity] [r] side: When the distance to the subject changes significantly, the camera immediately readjusts the focus.
10. Recording Videos – Video Brightness and Coloring Video Brightness and Coloring ≥ [Luminance Level]: 358 ≥ [Master Pedestal Level]: 359 ≥ Recording While Controlling Overexposure (Knee): 361 ≥ [ISO Sensitivity (video)]: 363 This section describes the brightness and coloring settings used during video recording. • In “7. Metering/Exposure/ISO Sensitivity” and “8. White Balance/Image Quality”, the functions described work with both pictures and video. Please also refer to those sections.
10. Recording Videos – Video Brightness and Coloring [Luminance Level] You can set the luminance range to suit the purpose of video recording. You can set to [16-235] or [16-255], the standard for video, or to [0-255], which covers the entire range of luminance, the same as pictures. [ ][ ] Select [Luminance Level] Settings: [0-255]/[16-235]/[16-255] • When set to a 10-bit [Rec Quality], the setting items change to [0-1023], [64-940], and [64-1023].
10. Recording Videos – Video Brightness and Coloring [Master Pedestal Level] You can adjust the black level, which serves as the reference for images. 1 Set the mode dial to [ 2 Select [Master Pedestal Level]. ≥ [ ][ ].
10. Recording Videos – Video Brightness and Coloring 3 Adjust master pedestal. ≥Rotate , or . • Set in the range between j15 and i15.
10. Recording Videos – Video Brightness and Coloring Recording While Controlling Overexposure (Knee) When [Photo Style] is set to [Like709], you can adjust the knee so that recording can be performed with minimal overexposure. 1 Set [Photo Style] to [Like709]. ≥ [ ][ ] [Photo Style] [Like709] /LNH ±0 ±0 2 Press [Q].
10. Recording Videos – Video Brightness and Coloring 3 Select a knee setting. ≥Press 21 to select a setting item. [AUTO] Adjusts the compression levels of high-luminance areas automatically. [MANUAL] You can set the luminance where compression starts (knee master point) and the intensity of compression (knee master slope). Press 34 to select an item and then press 21 to adjust. [POINT]: Master knee point [SLOPE]: Master knee slope • Rotate to adjust the knee master point, and master slope.
10. Recording Videos – Video Brightness and Coloring [ISO Sensitivity (video)] Sets the lower and upper limits for ISO sensitivity when ISO sensitivity is set to [AUTO]. 1 Set the mode dial to [ 2 Set [ISO Sensitivity (video)]. ≥ [ ][ ].
10. Recording Videos – Video Brightness and Coloring Setting Items ([ISO Sensitivity (video)]) [ISO Auto Lower Limit Setting] Sets the lower limit for ISO sensitivity when ISO sensitivity is [AUTO]. • Set in the range between [200] and [6400]. Sets the upper limit for ISO sensitivity when ISO [ISO Auto Upper Limit Setting] sensitivity is [AUTO]. • Set to [AUTO] or in the range between [400] and [12800]. • When [Filter Settings] is set to [High Dynamic], [ISO Sensitivity (video)] cannot be used.
10. Recording Videos – Audio Settings Audio Settings ≥ [Sound Rec Level Disp.]: 365 ≥ [Mute Sound Input]: 366 ≥ [Sound Rec Gain Level]: 366 ≥ [Sound Rec Level Adj.]: 367 ≥ [Sound Rec Level Limiter]: 367 ≥ [Wind Noise Canceller]: 368 ≥ [Lens Noise Cut]: 369 [Sound Rec Level Disp.] The sound recording level is displayed on the recording screen. [ ][ ] Select [Sound Rec Level Disp.] Settings: [ON]/[OFF] • When [Sound Rec Level Limiter] is set to [OFF], [Sound Rec Level Disp.] is fixed to [ON].
10. Recording Videos – Audio Settings [Mute Sound Input] This mutes audio input. [ ][ ] Select [Mute Sound Input] Settings: [ON]/[OFF] • [ ] is displayed on the recording screen. • The audio input from the external microphone will also be muted. [Sound Rec Gain Level] This switches the gain of audio input. [ ][ [STANDARD] [LOW] ] Select [Sound Rec Gain Level] This is the standard input gain setting. (0 dB) Audio input is reduced for recording in environments with loud noises.
10. Recording Videos – Audio Settings [Sound Rec Level Adj.] Manually adjust the sound recording level. 1 2 Select [Sound Rec Level Adj.]. • [ ][ ] [Sound Rec Level Adj.] Press 21 to adjust the sound recording level and then press or . • You can adjust the sound recording level within the range from [MUTE], [j18dB] to [i12dB] in steps of 1 dB. • Displayed dB values are approximate. • When set to [MUTE], [ ] is displayed in the recording screen.
10. Recording Videos – Audio Settings [Wind Noise Canceller] This reduces the wind noise coming into the built-in microphone while maintaining sound quality. [ ][ [HIGH] [STANDARD] ] Select [Wind Noise Canceller] This effectively reduces the wind noise by reducing the low-pitched sound when a strong wind is detected. This reduces wind noise without loss of sound quality by filtering out only wind noise. [OFF] — • You may not see the full effect depending on the recording conditions.
10. Recording Videos – Audio Settings [Lens Noise Cut] You can reduce the zoom sound produced during video recording when you are using interchangeable lens compatible with power zoom. [ ][ ] Select [Lens Noise Cut] Settings: [ON]/[OFF] • When this function is used, the sound quality may differ from that during normal operation.
10. Recording Videos – Main Assist Functions Main Assist Functions ≥ [SS/Gain Operation]: 371 ≥ [WFM/Vector Scope]: 372 ≥ [Luminance Spot Meter]: 376 ≥ [Zebra Pattern]: 378 ≥ [Frame Marker]: 380 ≥ Color bars/Test Tone: 381 This section describes the main assist functions that are convenient when recording. • The [Custom] ([Monitor / Display (Video)]) menu has display assist functions such as the center marker.
10. Recording Videos – Main Assist Functions [SS/Gain Operation] You can switch the units of shutter speed values and gain (sensitivity) values. [ ][ [SEC/ISO] ] Select [SS/Gain Operation] Displays the shutter speed in seconds and the gain in ISO. Displays the shutter speed in degrees and the gain in ISO. [ANGLE/ISO] • The angle can be set in a range between 11° and 358°. (When [Synchro Scan] is set to [OFF]) Displays the shutter speed in seconds and the gain in dB.
10. Recording Videos – Main Assist Functions [WFM/Vector Scope] This displays the waveform monitor or the vector scope on the recording screen. You can change the size of the waveform display. 1 Set the mode dial to [ 2 Set [WFM/Vector Scope]. ≥ [ ][ ]. ] [WFM/Vector Scope] [WAVE] Displays a waveform. [VECTOR] Displays the vector scope.
10. Recording Videos – Main Assist Functions 3 Select the position to display. ≥Press 3421 to select and then press or . • You can also move using touch operations. • You can rotate to change the size of the waveform. • To return the waveform or vector scope position back to the center, press [DISP.]. With waveform, pressing [DISP.] once again returns the size to the default setting.
10. Recording Videos – Main Assist Functions Screen Displays Waveform • The waveform displayed on the camera indicates the luminance as values based on the conversions below: 0 % (IRE*1): Luminance value 16 (8-bit) 100 % (IRE*1): Luminance value 235 (8-bit) *1 IRE: Institute of Radio Engineers (A) (B) (C) (F) (D) (E) (A) 109 % (IRE) (Dotted line) (B) 100 % (IRE) (C) 50 % (IRE) (D) 0 % (IRE) (E) j4 % (IRE) (Dotted line) (F) The range between 0 % and 100 % shows dotted lines at intervals of 10 %.
10. Recording Videos – Main Assist Functions Vector scope (G) (J) (H) (K) (I) (L) (G) R (Red) (H) YL (Yellow) (I) G (Green) (J) MG (Magenta) (K) B (Blue) (L) CY (Cyan) Display example • You can also change the position by dragging on the recording screen. • The waveform and vector scope are not output through HDMI. • When [WFM/Vector Scope] is set, [Histogram] does not work.
10. Recording Videos – Main Assist Functions [Luminance Spot Meter] Specify any spot on the subject to measure the luminance over a small area. 1 Set [Luminance Spot Meter].
10. Recording Videos – Main Assist Functions 2 Select the position where you want to measure the luminance. ≥Press 3421 to select and then press or . • You can also change the position by dragging the frame on the recording screen. • To return the position back to the center, press [DISP.]. (A) (A) Luminance value Measurement Range Measuring is possible in the range j7 % to 109 % (IRE). • When [Photo Style] is set to [V-Log L], this can be measured with “Stop” units.
10. Recording Videos – Main Assist Functions [Zebra Pattern] Parts that are brighter than the benchmark value are displayed with stripes. You can also set the benchmark value and the breadth of the range so that the stripes are displayed on parts that are within the range of brightness you specify.
10. Recording Videos – Main Assist Functions [ ][ [ZEBRA1] [ZEBRA2] [ZEBRA1+2] ] Select [Zebra Pattern] Parts that are brighter than the benchmark value are displayed with [ZEBRA1] stripes. Parts that are brighter than the benchmark value are displayed with [ZEBRA2] stripes. Both [ZEBRA1] and [ZEBRA2] are displayed. [OFF] — Sets the benchmark brightness.
10. Recording Videos – Main Assist Functions [Frame Marker] A frame with the set aspect ratio is displayed on the recording screen. This allows you to see during recording the angle of view that will be achieved with trimming (cropping) in post-processing. [ [ON] [OFF] ][ ] Select [Frame Marker] Displays video grid lines on the recording screen. — Sets the aspect ratio of video grid lines. [Frame Aspect]: [2.39:1]/[2.35:1]/[2.00:1]/[1.
10. Recording Videos – Main Assist Functions Color bars/Test Tone The color bars are displayed on the recording screen. A test tone is output while the color bars are being displayed. [SMPTE] [EBU] [ARIB] [ ][ ] Select [Color Bars] Settings: [SMPTE]/[EBU]/[ARIB] • To end the display, press .
10. Recording Videos – Main Assist Functions Adjusting the Test Tone There are 4 levels ([j12dB], [j18dB], [j20dB], and [MUTE]) of test tone to select. 1 Rotate , or to select the test tone level. • The color bars and test tone will be recorded on the video if video recording is started while the color bars are being displayed. • The brightness and coloring that appear on the camera’s monitor or viewfinder may differ from those that appear on another device such as an external monitor.
10. Recording Videos – [Variable Frame Rate] [Variable Frame Rate] By recording using a frame rate that is different to the playback frame rate, you can record smooth slow motion video and fast motion video. Set a number of frames that is higher than the Slow Motion Video recording frame rate of the [Rec Quality]. (Overcrank Recording) For example: When recording at 48 fps and set to a 24.00p [Rec Quality], the speed is halved.
10. Recording Videos – [Variable Frame Rate] 1 Set the mode dial to [ 2 Set [Rec. File Format] to [MOV]. 3 [ ≥ ][ ]. ] [Rec. File Format] [MOV] Select a recording quality with which you can use [Variable Frame Rate] recording. ≥ [ ][ ] [Rec Quality] • Items with which you can use [Variable Frame Rate] are indicated as [VFR available].
10. Recording Videos – [Variable Frame Rate] 4 Set [Variable Frame Rate]. 5 Set the frame rate. ≥ [ ][ ] [Variable Frame Rate] [ON] ≥Press 21 to switch between [ON] and [OFF]. ≥Rotate or . , or to select a numeric value, then press Available Frame Rate Setting Ranges The frame rate you can set differs depending on the [Rec Quality] settings.
10. Recording Videos – [Variable Frame Rate] • You can filter to show just the recording qualities where [Variable Frame Rate] can be used. ([Filtering]: 346) • We recommend using a tripod when recording images with [Variable Frame Rate]. • Focus mode switches to MF. (When using an interchangeable lens with no focus ring, you cannot set focus with MF.) • If you press the [AF ON] only before recording starts, the focus will be adjusted automatically.
10. Recording Videos – [Focus Transition] [Focus Transition] Smoothly transitions the focus position from the current position to a position registered in advance. 1 Set the mode dial to [ 2 Select [Focus Transition]. ≥ [ ][ ].
10. Recording Videos – [Focus Transition] 3 Set the recording settings. [Start] Start recording. [Focus Pull Setting] Registers the focus position. • The setting screen for the focus position is displayed when you select either [1], [2], or [3]. Use the same procedure as MF (Record Using MF: 168) to check the focus, then press or to register the focus position. [Focus Transition Speed] Sets the moving speed of focus.
10. Recording Videos – [Focus Transition] 5 Start recording. ≥Press the video rec. button. • If you have enabled [Focus Transition Rec], Focus Transition will start when you start recording a video. 6 Start Focus Transition. ≥Press 21 to select [1], [2], or [3], and then press or . • When [Focus Transition Wait] is set, Focus Transition starts after the set time has elapsed.
10. Recording Videos – [Focus Transition] 7 End Focus Transition. 8 Stop recording. ≥Press [Q]. ≥Press the video rec. button once again. • Maintain the same distance to the subject after setting the focus position. • The moving speed of focus varies depending on the lens being used. • While using [Focus Transition], it is not possible to focus on anything other than the registered focus position. • Any of the operations below will clear the focus position settings.
10. Recording Videos – [Live Cropping] [Live Cropping] By cropping a part of the image from the image displayed in the live view, it is possible to record FHD video that incorporates panning and zooming with the camera staying in a fixed position. Pan Zoom in • Use a tripod to minimize camera shake.
10. Recording Videos – [Live Cropping] 1 Set the mode dial to [ 2 Set [Rec. File Format]. 3 ≥ [ ][ ]. ] [Rec. File Format] [MP4]/[MOV] Select a recording quality with which you can record [Live Cropping] video.
10. Recording Videos – [Live Cropping] 4 Set the time for panning or zooming. ≥ [ ][ ] [Live Cropping] [40SEC]/[20SEC] • If you have selected a recording quality where Live Cropping recording is not available, the camera switches to an FHD video recording quality where recording is possible. 5 Set the cropping start frame. ≥Select the range to be cropped and press (A) 6WDUW ュリヴヱハ 5HVHW 6HW (A) Cropping start frame 393 or .
10. Recording Videos – [Live Cropping] 6 Set the cropping end frame. ≥Select the range to be cropped and press or . • To redo the settings for the position and size of the start frame and the end frame, press 2.
10. Recording Videos – [Live Cropping] 7 Start Live Cropping recording. ≥Press the video rec. button. • When the set operating time has elapsed, recording automatically ends. To end recording midway, press the video rec. button again.
10. Recording Videos – [Live Cropping] Operations for Setting the Cropping Frame Button Touch operation operation 3421 / Touch Pinch out/ pinch in — Description of operation Moves the frame. Enlarges/reduces the frame in small steps. Enlarges/reduces the frame. Start frame: Returns the frame position and size [DISP.] [Reset] to the default settings. End frame: Cancels the settings for the position and size of the frame. [Set] • AF mode switches to [ Confirms the frame position and size.
10. Recording Videos – Log Recording Log Recording ≥ [V-Log L] Settings: 397 ≥ [V-LogL View Assist]: 399 [V-Log L] Settings Setting [Photo Style] to [V-Log L] enables Log recording. Images finished with rich gradation can be created through post production processing. [ ][ ] [Photo Style] Select [V-Log L] • Post-production processing is enabled by utilizing LUT (Look-Up Table). You can download LUT data from the following support site: https://panasonic.jp/support/global/cs/dsc/download/index3.
10. Recording Videos – Log Recording Exposure When [V-Log L] Is Set The [V-Log L] curve characteristics comply with “V-Log/V-Gamut REFERENCE MANUAL Rev.1.0”. When set to [V-Log L], the standard exposure when gray with a reflectance ratio of 18 % is imaged is IRE 42 %.
10. Recording Videos – Log Recording • Luminance can be checked by “Stop” units: [ ][ ] [Luminance Spot Meter] ([Luminance Spot Meter]: 376) [ ][ ] [Zebra Pattern] ([Zebra Pattern]: 378) [V-LogL View Assist] When [Photo Style] is set to [V-Log L], the recording screen and images output via HDMI will darken. Using [V-LogL View Assist] means you can show images with LUT data applied on the monitor/viewfinder and output them via HDMI.
10. Recording Videos – Log Recording Reading LUT Files • The following LUT data can be used: – The “.vlt” format, which meets the requirements specified in the “VARICAM 3DLUT REFERENCE MANUAL Rev.1.0” – The number of characters that can be used in a file name differs depending on the file system of the card. (Use alphanumeric characters for the file name.) FAT32 (SD/SDHC card): Up to 8 characters (excluding extension). exFAT (SDXC card): Up to 255 characters (including the extension).
10. Recording Videos – HLG Videos HLG Videos ≥ [Hybrid Log Gamma] settings: 402 ≥ [HLG View Assist]: 405 Record videos with the wide dynamic range of the HLG format. You can record in very bright light where overexposure can occur or in dark areas where underexposure can occur, maintaining the rich yet subtle colors you can see with your naked eye. You can view the video that you record by outputting via HDMI to devices (TVs, etc.
10. Recording Videos – HLG Videos [Hybrid Log Gamma] settings 1 Set the mode dial to [ 2 Set [Rec. File Format]. ≥ [ ][ ]. ] [Rec.
10. Recording Videos – HLG Videos 3 Select a recording quality with which you can record HLG video. ≥ [ ][ ] [Rec Quality] • Items available for recording with HLG video are indicated as [HLG available]. • Recording qualities with which you can record HLG video (List of Recording Qualities That Enable Special Videos to be Recorded: 417) 4 Set [Photo Style] to [Hybrid Log Gamma].
10. Recording Videos – HLG Videos • When the [Rec. File Format] has been set to [MOV], you can display just the recording qualities where HLG video recording can be used. ([Filtering]: 346) • The monitor and viewfinder on this camera do not support display of HLG format images. With [Monitor] in [HLG View Assist] in the [Custom] ([Monitor / Display (Video)]) menu, you can display the images converted for monitoring on the monitor/ viewfinder of this camera.
10. Recording Videos – HLG Videos [HLG View Assist] At recording or playback of HLG video, this displays images with converted color gamut and brightness on the camera monitor/viewfinder, or outputs these over HDMI. [ [HDMI] ][ ] [HLG View Assist] [Monitor] or Converts images before outputting them via HDMI while *1 [AUTO] applying the effect of [MODE2]. This conversion setting works only when the camera is connected to a device that does not support HDR (HLG format).
10. Recording Videos – Anamorphic Recording Anamorphic Recording ≥ 6K/4K Anamorphic (4:3) video: 407 ≥ [Anamorphic Desqueeze Display]: 408 This camera can record video with a resolution of 6K-A/4K-A (6K/4K anamorphic (4:3) video) that is compatible with anamorphic recording with an aspect ratio of 4:3. Along with the normal 16:9 video aspect ratio, you can select the recording quality suited to anamorphic recording. – It is also possible to switch to an image stabilizer that suits anamorphic recording.
10. Recording Videos – Anamorphic Recording 6K/4K Anamorphic (4:3) video 1 2 Set [Rec. File Format] to [MOV]. [ ≥ ][ ] [Rec. File Format] [MOV] Select a recording quality wherein you can record 6K/4K Anamorphic (4:3) video. ≥ [ ][ ] [Rec Quality] • Items available for recording 6K/4K Anamorphic (4:3) video are indicated as [ANAMOR].
10. Recording Videos – Anamorphic Recording [Anamorphic Desqueeze Display] Display the de-squeezed images suited to the magnification of the anamorphic lens on this camera. Using the [Frame Marker], it is also possible to impose on display the frame of the angle of view when cropping after de-squeeze editing. 1 Set the mode dial to [ ].
10. Recording Videos – Anamorphic Recording 2 Set [Anamorphic Desqueeze Display]. [ ≥ ][ [ ] ([2.0k]) [ ] ([1.8k]) [ ] ([1.5k]) [ ] ([1.33k]) [ ] ([1.30k]) ] [Anamorphic Desqueeze Display] [OFF] • Make settings to suit the magnification of the anamorphic lens you are using.
10. Recording Videos – Anamorphic Recording 3 Set [Frame Marker]. ≥ [ ][ ] [Frame Marker] ([Frame Marker]: 380) • Images output via HDMI are not de-squeezed. • This camera is not compatible with de-squeeze editing of video recorded with anamorphic recording. Use compatible software.
10. Recording Videos – [Synchro Scan] [Synchro Scan] Fine-adjust the shutter speed to reduce flickering and horizontal stripes. The shutter speed set in Synchro Scan is saved separately from the shutter speed used for normal recording. In the Synchro Scan setting screen you can call up the current shutter speed for normal recording and adjust it. 1 Set the mode dial to [ 2 Set the exposure mode to [S] or [M]. ≥ [ ][ ].
10. Recording Videos – [Synchro Scan] 3 Set [Synchro Scan]. 4 Set the shutter speed. [ ≥ ][ ] [Synchro Scan] [ON] ≥Rotate , or to select a numeric value, then press or . • You can call up the current shutter speed for normal recording by pressing [DISP.]. • Adjust the shutter speed while looking at the screen so that flickering and horizontal stripes will be minimized. 61 ュリヴヱハ &XUUHQW VKXWWHU VSHHG • When you set [Synchro Scan] to [ON], the available shutter speed range becomes narrower.
10. Recording Videos – [Loop Recording (video)] [Loop Recording (video)] Even when recording uses up the card’s free space, the camera continues the recording by deleting the oldest segment of the recorded data. 1 Set the mode dial to [ 2 Set [Rec. File Format] to [MOV]. ≥ [ ][ ]. ] [Rec.
10. Recording Videos – [Loop Recording (video)] 3 Set [Loop Recording (video)]. ≥ [ ][ ] [Loop Recording (video)] [ON] •[ ] is displayed on the recording screen. • When the recording fills the card to capacity, loop recording starts and video recording time is no longer displayed. • Make sure the camera does not turn off during recording. • Loop recording cannot start if there is insufficient available capacity on the card.
10. Recording Videos – [Segmented File Recording] [Segmented File Recording] To avoid video loss due to unforeseen interruptions to the power supply, recorded video is divided every few minutes while MOV video is being recorded. • The divided videos are saved as one group image. 1 Set [Rec. File Format] to [MOV]. 2 Set [Segmented File Recording]. ≥ ≥ [ ][ ] [Rec. File Format] [MOV] [ ][ ] [Segmented File Recording] [10MIN.]/ [5MIN.]/[3MIN.]/[1MIN.
10.
10.
10. Recording Videos – List of Recording Qualities That Enable Special Videos to be Recorded [Rec. File Format]: [MP4] [System Frequency]: [59.94Hz (NTSC)] [Rec Quality] Live Crop [4K/10bit/100M/60p] HLG [4K/8bit/100M/30p] [4K/10bit/72M/30p] [4K/8bit/100M/24p] [4K/10bit/72M/24p] [FHD/8bit/28M/60p] [FHD/8bit/24M/24p] [FHD/8bit/20M/30p] [System Frequency]: [50.
10. Recording Videos – List of Recording Qualities That Enable Special Videos to be Recorded [Rec. File Format]: [MOV] [System Frequency]: [59.
10. Recording Videos – List of Recording Qualities That Enable Special Videos to be Recorded [FHD/60p/422/10-I] [FHD/60p/422/10-L] [FHD/60p/420/8-L] [FHD/30p/422/10-I] [FHD/30p/422/10-L] [FHD/30p/420/8-L] [FHD/24p/422/10-I] [FHD/24p/422/10-L] [FHD/24p/420/8-L] [System Frequency]: [50.
10. Recording Videos – List of Recording Qualities That Enable Special Videos to be Recorded [FHD/50p/422/10-I] [FHD/50p/422/10-L] [FHD/50p/420/8-L] [FHD/25p/422/10-I] [FHD/25p/422/10-L] [FHD/25p/420/8-L] [System Frequency]: [24.
11.
11. Connections with External Devices (Video) – HDMI Devices (HDMI Output) HDMI Devices (HDMI Output) ≥ Attaching the Cable Holder: 425 ≥ Images Output via HDMI: 428 You can record while outputting the camera images to an external monitor or external recorder connected with an HDMI cable. • HDMI output control differs between during recording and during playback.
11. Connections with External Devices (Video) – HDMI Devices (HDMI Output) 1 Connect the camera and an external monitor or external recorder with a commercially available HDMI cable. (A) (B) (C) (A) [HDMI] socket (Type A) (B) External monitor (C) External recorder • Check the direction of the terminals and plug in/out straight holding onto the plug. (Inserting at an angle can deform the terminal and cause malfunction.) • Do not connect the cable to the wrong terminals. This may cause a malfunction.
11. Connections with External Devices (Video) – HDMI Devices (HDMI Output) Attaching the Cable Holder Use of the supplied cable holder prevents detachment of the cable and damage to the terminals. • Put the camera on a stable surface to perform this task. Example: Attaching to an HDMI cable 1 While pushing (A) (1), slide the clamp portion of the cable holder to remove it (2).
11. Connections with External Devices (Video) – HDMI Devices (HDMI Output) 3 4 5 Attach the HDMI cable to the clamp portion (6). Slide the clamp portion to attach it to the cable holder (7). Connect the HDMI cable to the [HDMI] socket (8). • You can also connect the HDMI cable and USB connection cable at the same time when the cable holder is attached. (B) (B) Leave some slack so that this section has a length of at least 10 cm (0.33 feet).
11. Connections with External Devices (Video) – HDMI Devices (HDMI Output) Removing the cable holder To remove the cable holder, follow the steps for attaching it in the reverse order. • Do not use any other USB connection cables except the supplied USB connection cables. • We recommend using an HDMI cable with a thickness diameter of 6 mm (0.24 inch) or less. • It may not be possible to attach HDMI cables of certain shapes.
11. Connections with External Devices (Video) – HDMI Devices (HDMI Output) Images Output via HDMI The images output via HDMI differ depending on the recording mode. [ ] Mode Aspect ratio, resolution, and frame rate output is according to the [Rec Quality] settings in the [Video] ([Image Format]) menu. Resolution and frame rate can be down-converted for output according to the application. YUV 4:2:2 is used for YUV and bit value output.
11. Connections with External Devices (Video) – HDMI Devices (HDMI Output) [iA]/[P]/[A]/[S]/[M] Mode • Output is the same as [ ] mode during video recording. • During recording standby, it is output according to the setting of [Aspect Ratio] in the [Photo] ([Image Quality]) menu. – When set to any [Aspect Ratio] other than 16:9, bands are added to the left and right of the image for output. – Resolution, frame rate, YUV, and bit value output matches the connected device.
11. Connections with External Devices (Video) – HDMI Output Image Quality (Resolution/Frame Rate) HDMI Output Image Quality (Resolution/ Frame Rate) ≥ Settings for Down-Converting: 430 Settings for Down-Converting Make settings for the down-conversion of resolution and frame rate for HDMI output in the [ ] mode. [ ][ Convert] [AUTO] [4K/30p] ([4K/25p]) [1080p] [1080i] [OFF] ] [HDMI Rec Output] Select [Down Outputs by down-converting to match the connected device.
11. Connections with External Devices (Video) – HDMI Output Image Quality (Resolution/Frame Rate) Image Quality When Outputting via HDMI Output is with the resolution and frame rate according to the combinations of the [Rec Quality] and [Down Convert] settings. • When [Down Convert] is set to [AUTO], the output matches the connected device. • There is no HDMI output when setting combinations result in a [—] in the below tables. [System Frequency]: [59.
11. Connections with External Devices (Video) – HDMI Output Image Quality (Resolution/Frame Rate) [System Frequency]: [50.00Hz (PAL)] Resolution and recording frame rate of the [Rec Quality] [Down Convert] 6K-A/25.00p 4K-A/50.00p 4K-A/25.00p 4K/50.00p C4K/50.00p C4K/25.00p 4K/25.00p [4K/25p] 4K/25.00p 4K/25.00p 4K/25.00p 4K/25.00p [1080p] 1080/50.00p 1080/25.00p*2 1080/50.00p 1080/25.00p*2 [1080i] 1080/50.00i 1080/50.00i 1080/50.00i 1080/50.00i [OFF] 4K/50.00p 4K/25.00p C4K/50.
11. Connections with External Devices (Video) – HDMI Output Settings HDMI Output Settings ≥ Outputting the Camera Information Display via HDMI: 433 ≥ Outputting Control Information to an External Recorder: 434 ≥ Outputting Down-converted Audio to an HDMI Device: 435 ≥ Outputting Audio via HDMI: 435 ≥ Output the enlarged display of MF assist via HDMI: 436 Outputting the Camera Information Display via HDMI Output the camera information display to an external device connected by HDMI.
11. Connections with External Devices (Video) – HDMI Output Settings Outputting Control Information to an External Recorder Recording start and stop control information is output to an external recorder connected by HDMI. [ ][ ] [HDMI Rec Output] Select [HDMI Recording Control] Settings: [ON]/[OFF] • [HDMI Recording Control] can be set when [HDMI Time Code Output] is set to [ON] in [ ] mode. • Control information is output when pressing the video rec.
11. Connections with External Devices (Video) – HDMI Output Settings Outputting Down-converted Audio to an HDMI Device When an XLR Microphone Adaptor (DMW-XLR1: optional) is attached, audio is down-converted to a format suitable for the connected HDMI external device before being output. [ ][ Down Convert] [AUTO] [OFF] ] [HDMI Rec Output] Select [Sound Output is down-converted to match the connected device. Output is according to the settings in [XLR Mic Adaptor Setting].
11. Connections with External Devices (Video) – HDMI Output Settings Output the enlarged display of MF assist via HDMI The MF Assist enlarged display is output to the external device connected via HDMI. [ ][ Assist Output] ] [HDMI Rec Output] Select [HDMI MF Settings: [ON]/[OFF] • When [HDMI MF Assist Output] is set to [OFF] and the MF Assist enlarged display is being shown, the camera information display is not output via HDMI.
11. Connections with External Devices (Video) – External Microphones (Optional) External Microphones (Optional) With a Stereo Shotgun Microphone (DMW-MS2: optional) or Stereo Microphone (VW-VMS10: optional), you can record higher quality audio compared to the built-in microphone. • Some optional accessories may not be available in some countries. 1 2 Set the camera on/off switch to [OFF]. Connect the camera and external microphone.
11. Connections with External Devices (Video) – External Microphones (Optional) Setting the Sound Pickup Range (DMW-MS2: Optional) When using the Stereo Shotgun Microphone (DMW-MS2: optional), you can set the microphone sound pickup range. 1 Select [Special Mic.]. • [ ][ ] [Special Mic.] [STEREO] Picks up sound over a wide area. [LENS AUTO] Picks up sound from a range automatically set by the lens angle of view.
11. Connections with External Devices (Video) – External Microphones (Optional) Reduction of Wind Noise This reduces wind noise when an external microphone is connected. [ ][ ] Select [Wind Cut] Settings: [HIGH]/[STANDARD]/[LOW]/[OFF] • While the external microphone is connected, [ ] is displayed on the screen. • When an external microphone is connected, [Sound Rec Level Disp.] automatically turns [ON], and the recording level is displayed on the screen.
11. Connections with External Devices (Video) – XLR Microphone Adaptor (Optional) XLR Microphone Adaptor (Optional) By attaching an XLR Microphone Adaptor (DMW-XLR1: optional) to the camera, you can use a commercially available XLR microphone to enable the recording of superior-quality high-res/stereo audio. (A) (B) (A) Hot shoe (B) Commercially available XLR microphone Getting started: • Turn off the camera, and remove the hot shoe cover.
11. Connections with External Devices (Video) – XLR Microphone Adaptor (Optional) 3 Select [XLR Mic Adaptor Setting]. ≥ [ ][ ] [XLR Mic Adaptor Setting] [96kHz/24bit] Records high resolution audio at 96 kHz/24-bit. • Only available when [Rec. File Format] is set to [MOV]. [48kHz/24bit] Records high-quality audio at 48 kHz/24-bit. • Only available when [Rec. File Format] is set to [MOV]. [48kHz/16bit] Records standard-quality audio at 48 kHz/16-bit.
11. Connections with External Devices (Video) – Headphones Headphones You can record videos while monitoring their sound by connecting commercially available headphones to the camera. (A) (A) Headphone socket • Do not use the headphone cables with the length of 3 m (9.8 feet) or more. • When headphones are connected, beep sounds, AF beep, and electronic shutter sounds are muted.
11. Connections with External Devices (Video) – Headphones Switching the Sound Output Method [ ][ ] Select [Sound Output] [REALTIME] [REC SOUND] Audio without time lag. It may differ from the sound recorded in videos. Audio to be recorded in videos. Output sound may be delayed from actual sound. • The setting is fixed to [REC SOUND] in the following cases: – During output of audio via HDMI – When [Special Mic.] is set to [LENS AUTO], [SHOTGUN], [S.
12. Playing Back and Editing of Images ≥ Playing Back Pictures: 445 ≥ Playing Back Videos: 447 ≥ Switching the Display Mode: 451 ≥ Group Images: 457 ≥ Deleting Images: 459 ≥ [RAW Processing]: 461 ≥ [Video Divide]: 468 This chapter explains how to play back and delete pictures and videos. It also explains editing using [RAW Processing] ([RAW Processing]: 461) and [Video Divide] ([Video Divide]: 468).
12. Playing Back and Editing of Images – Playing Back Pictures Playing Back Pictures 1 Display the playback screen. 2 Select a picture. ≥Press [ ]. ≥Select the pictures by pressing 21. ≥You can move continuously through images by pressing and holding 21. ≥You can also select by rotating or . ≥You can also move through images by dragging the screen horizontally.
12. Playing Back and Editing of Images – Playing Back Pictures 3 Stop playback. ≥Press the shutter button halfway. ≥You can also stop playback by pressing [ ]. Switching the Card to Display You can switch the card displayed just by pressing [ ] during playback. • You can also perform the same operation by pressing the Fn button assigned with [Card Slot Change]. (Fn Buttons: 472) 1 Press [ ]. 2 Press 34 to select [Card Slot 1] or [Card Slot 2] and then press 446 or .
12. Playing Back and Editing of Images – Playing Back Videos Playing Back Videos ≥ Extracting a Picture: 450 1 Display the playback screen. 2 Select a video. ≥Press [ ]. • For information about how to select images (Playing Back Pictures: 445) • The [ ] video icon is displayed for a video. • The video recording time is displayed on the screen.
12. Playing Back and Editing of Images – Playing Back Videos 3 Play back the video. ≥Press 3. ≥You can also start playback by touching [ screen. (B) (C) (B) Elapsed playback time 4 (C) Playback bar Stop playback. ≥Press 4.
12. Playing Back and Editing of Images – Playing Back Videos Operations During Video Playback Button Touch operation operation 3 / 4 — Description of operation Plays/pauses. Stops. Performs fast-rewind playback. • If you press 2 again, the fast-rewind speed 2 — increases. Performs frame-by-frame rewinding (while paused). Performs fast-forward playback. • If you press 1 again, the fast-forward speed 1 — increases. Performs frame-by-frame forwarding (while paused).
12. Playing Back and Editing of Images – Playing Back Videos Extracting a Picture Extract one frame of a video and save it as a JPEG image. 1 Pause playback at the position you wish to extract a picture. ≥Press 3. • To fine-adjust the position, press 21 (rewind frame-by-frame or forward frame-by-frame). 2 Save the picture. ≥Press or . ≥You can also save the picture by touching [Save]. • The picture created from the video is saved with a [FINE] picture quality.
12. Playing Back and Editing of Images – Switching the Display Mode Switching the Display Mode ≥ Enlarged Display: 451 ≥ Thumbnail Screen: 453 ≥ Calendar Playback: 455 You can use features to do things like enlarge recorded images for display and switch to thumbnail display to display multiple images at once (multiplayback). You can also switch to calendar display to show images of a selected recording date. Enlarged Display Playback images can be displayed enlarged (Playback Zoom).
12. Playing Back and Editing of Images – Switching the Display Mode Operations During Enlarged Display Button Touch operation operation — — Pinch out/ pinch in 3421 Drag / — Description of operation Enlarges/reduces the screen. Enlarges/reduces the screen in small steps. Moves the enlarged display position. Forwards or rewinds images while maintaining the same zoom magnification and zoom position. • You can display the point focused with AF.
12. Playing Back and Editing of Images – Switching the Display Mode Thumbnail Screen 1 Switch to thumbnail display. ≥Rotate to the left. ≥The display is switched in the order of 12-image screen 30-image screen. to the left during 30-image screen display switches to calendar • Rotating display. (Calendar Playback: 455) • Rotating to the right returns to the previous display. • You can also switch the display by touching an icon.
12. Playing Back and Editing of Images – Switching the Display Mode • When you press [ ] while a thumbnail is being displayed, you can switch to the card being displayed. • You can scroll the screen by dragging the thumbnail display up or down. • Images indicated with [ ] cannot be played back.
12. Playing Back and Editing of Images – Switching the Display Mode Calendar Playback 1 Switch to calendar playback. 2 Select the recording date. 3 Select an image. ≥Rotate to the left. ≥The display is switched in the order of thumbnail screen (12 images) Thumbnail screen (30 images) Calendar playback. to the right returns to the previous display. • Rotating ≥Press 3421 to select a date and then press ≥Press 3421 to select an image and then press • Rotating to the left returns to calendar playback.
12. Playing Back and Editing of Images – Switching the Display Mode • The card to display cannot be switched during calendar display. • The range that the calendar can be displayed is January 2000 to December 2099.
12. Playing Back and Editing of Images – Group Images Group Images Images recorded with Time Lapse Shot or Stop Motion Shooting are handled as group images in the camera, and can be deleted and edited on a group basis. (For example, if you delete a group image, all images in the group are deleted.) You can also delete and edit each image in a group individually. Images Handled as Group Images by the Camera 1/999 SLF Group images saved with [6K/4K PHOTO Bulk Saving].
12. Playing Back and Editing of Images – Group Images Playing and Editing the Images in a Group One by One Operations such as displaying thumbnails and deleting images are available with images in groups just as with normal playback. 1 Select the group image in the playback state. (Playing Back Pictures: 445) 2 Press 4 to display the images in the group. 3 Press 21 to select an image. • You can also perform the same operation by touching the group image icon.
12. Playing Back and Editing of Images – Deleting Images Deleting Images • Images cannot be restored once they have been deleted. Carefully confirm the images before deletion. • You can only delete the images in the card of the selected card slot. • If you delete a group image, all images in the group are deleted. 1 Press [ ] in playback state.
12. Playing Back and Editing of Images – Deleting Images 2 Press 34 to select the deletion method and then press or . [Delete Single] Deletes the selected image. [Delete Multi] Selecting and deleting multiple images. 1 Press 3421 to select the image to delete and then press or • [ ] is displayed for the selected image. • If you press or again, the selection is canceled. • Up to 100 images can be selected. 2 Press [DISP.] to delete the selected image.
12. Playing Back and Editing of Images – [RAW Processing] [RAW Processing] This processes pictures taken in RAW format on the camera and saves them in JPEG format. 1 Select [RAW Processing]. 2 Select the RAW image. ≥ [ ][ ] [RAW Processing] ≥Press 21 to select an image and then press or . • When group images are selected, press 4 and then select an image in the group. Press 4 again to return to the normal selection screen.
12. Playing Back and Editing of Images – [RAW Processing] 3 Select a setting item. 4 Change the setting. 5 Confirm the setting. ≥Press 34 to select an item and then press or . ≥Rotate , , or . • The image can be enlarged/reduced by pinching out/pinching in the screen. ≥Press or . ≥The screen of Step reappears. To set another item, repeat Steps 3 462 3 to 5.
12. Playing Back and Editing of Images – [RAW Processing] 6 Save the image. ≥Press 34 to select [Begin Processing] and then press .
12. Playing Back and Editing of Images – [RAW Processing] Setting Items ([RAW Processing]) [Begin Processing] Saves the image. Selects and adjusts the white balance. Selecting the item with [ ] enables processing with the same setting as at the time of recording. [White Balance] • If you press 4 in the [White Balance] selection screen, the white balance adjustment screen appears. • If you press 3 while [ 1 ] to [ 4 ] is selected, the color temperature setting screen appears.
12. Playing Back and Editing of Images – [RAW Processing] [i.Dynamic Range] [Contrast] Selects the setting of [i.Dynamic Range]. Adjusts the contrast. [Highlight] Adjusts the brightness of bright portions. [Shadow] Adjusts the brightness of dark portions. [Saturation]/[Color Tone] [Hue] Adjusts the saturation or color tone. Adjusts the hue. [Filter Effect] Selects filter effects. [Grain Effect] Selects a grain effect setting.
12. Playing Back and Editing of Images – [RAW Processing] • The items that can be adjusted depend on the selected [Photo Style].
12. Playing Back and Editing of Images – [RAW Processing] Displaying a Comparison Screen You can change a setting while checking the effect by displaying images with the applied setting value side by side. 1 Press [DISP.] in the screen of Step 4. • The image with the current setting (A) is displayed at the center. • Touching the image with the current setting enlarges it. Touching [ ] returns to the original display.
12. Playing Back and Editing of Images – [Video Divide] [Video Divide] Divide a recorded video or 6K/4K burst file into two. • Images cannot be returned to their original state once they have been divided. Carefully confirm the images before performing the divide operation. • Do not remove the card or battery from the camera during the divide process. The images may be lost. 1 Select [Video Divide]. 2 Select and play the image.
12. Playing Back and Editing of Images – [Video Divide] 3 Pause playback at the position you wish to divide. ≥Press 3. • To fine-adjust the position, press 21 (frame-by-frame rewind or frame-by-frame forward). 4 Divide the video. ≥Press or . ≥You can also divide the video by touching [Divide]. • Dividing the video at a point close to the start or end may not be possible. • Videos with a short recording time cannot be divided.
13. Camera Customization ≥ Fn Buttons: 472 ≥ [Dial Operation Switch]: 488 ≥ Quick Menu Customization: 491 ≥ Custom Mode: 499 ≥ My Menu: 504 ≥ [Save/Restore Camera Setting]: 506 This chapter describes the customization function with which you can configure the camera to your preferred settings. Change how buttons, dials, etc. on the camera are to be operated.
13. Camera Customization Change menu display items. ≥ Quick menu (Quick Menu Customization: 491) ≥ My Menu (My Menu: 504) Import camera settings information onto another camera. ≥ [Save/Restore Camera Setting] ([Save/Restore Camera Setting]: 506) • Detailed settings for camera operations and screen display are available in the [Custom] menu.
13. Camera Customization – Fn Buttons Fn Buttons ≥ Fn Button Default Settings: 473 ≥ Register Functions to the Fn Buttons: 475 ≥ Use the Fn Buttons: 486 You can register functions to the Fn (Function) buttons. Additionally, you can register other functions to specialized buttons such as [WB] button, in the same way as with the Fn buttons. Different functions can be set for both during recording and playback.
13. Camera Customization – Fn Buttons Fn Button Default Settings (1) (2) (3) (4) (7) (9) (10) (11) (5) (6) Fn buttons (1) [Setting in REC mode] [Fn2] (8) [Preview] [Setting in PLAY mode] [No Setting] (2) [WB] [White Balance] [No Setting] (3) [ISO] [Sensitivity] [No Setting] (4) [ ] [Exposure Comp.] [No Setting] (5) [ ] [Photo Style] [No Setting] [Video Record] [Video Record] (6) Video rec.
13. Camera Customization – Fn Buttons (12) (13) Fn buttons (12) (14) [Setting in REC mode] [Fn3] [Wi-Fi] [Fn4] [Histogram] [Fn5] [Boost I.S. (Video)] [Off (Disable Press and [Fn6] Hold)] [Off (Disable Press and [Fn7] Hold)] [Fn8] [Fn9] (13) [Fn10] • Cannot be used as Fn [No Setting] [Fn11] [Fn12] [Fn13] (14) [Setting in PLAY mode] [Fn14] [No Setting] [Fn15] [Fn16] 474 buttons during playback.
13. Camera Customization – Fn Buttons Register Functions to the Fn Buttons • With default settings, [Fn8] to [Fn12] on the joystick cannot be used. When using functions, set the [Joystick Setting] in the [Custom] ([Operation]) menu to [Fn]. ([Joystick Setting]: 564) 1 Select [Fn Button Set]. 2 Select the button. ≥ [ ][ ] [Fn Button Set] [Setting in REC mode]/ [Setting in PLAY mode] ≥Press 34 to select the button and then press ≥Selection is also possible by rotating or . • Press [DISP.
13. Camera Customization – Fn Buttons 3 Find the function to register. 4 Register the function. ≥Rotate to select the sub tab where the function to register is categorized (Setting Items ([Fn Button Set]/[Setting in REC mode]): 478, Setting Items ([Fn Button Set]/[Setting in PLAY mode]): 484) and then press or . ≥You can also select by pressing 2 to select the sub tab, pressing 34 or rotating , and then pressing 1. ≥Each press of [Q] switches between tabs [1] and [3].
13. Camera Customization – Fn Buttons • You can also touch [ Fn ] on the control panel (Recording Screen: 89) to display the screen in Step 2. • You can also press and hold the Fn button (2 sec.) to display the screen in Step 4. (This may not be displayed depending on the registered function and on the button type.
13. Camera Customization – Fn Buttons Setting Items ([Fn Button Set]/[Setting in REC mode]) [1] tab [Image Quality] • [Exposure Comp.
13.
13. Camera Customization – Fn Buttons [Others (Photo)] • [Drive Mode Setting] (Selecting the Drive Mode: 183) • [1 Shot "6K/4K PHOTO"] – Performs 6K/4K photo recording only once. • [Bracketing] (Bracket Recording: 232) • [Silent Mode] ([Silent Mode]: 240) • [Image Stabilizer] (Image Stabilizer: 244) • [Shutter Type] ([Shutter Type]: 241) • [Ex. Tele Conv.] (Extended Tele Conversion: 177) [Image Format] • [Rec. File Format] ([Rec.
13. Camera Customization – Fn Buttons [Others (Video)] • [Image Stabilizer] (Image Stabilizer: 244) • [E-Stabilization (Video)] ([E-Stabilization (Video)]: 247) • [Boost I.S. (Video)] ([Boost I.S. (Video)]: 247) • [Image Area of Video] ([Image Area of Video]: 349) • [Focus Transition] ([Focus Transition]: 387) • [Live Cropping] ([Live Cropping]: 391) [Operation] • [Q.MENU] (Quick Menu: 92) • [Rec / Playback Switch] – Switches to the playback screen.
13. Camera Customization – Fn Buttons [Monitor / Display] • [Preview] (Preview Mode: 268) • [Preview Aperture Effect] – The aperture effect can be previewed while the Fn button is being pressed.
13. Camera Customization – Fn Buttons [Lens / Others] • [Focus Ring Control] ([Focus Ring Control]: 582) • [Zoom Control] – You can operate zoom when using an interchangeable lens that supports the power zoom. • [Step Zoom] ([Power Zoom Lens]: 181) • [Zoom Speed] ([Power Zoom Lens]: 181) • [Lens Information] ([Lens Information]: 250) [Card/File] • [Destination Card Slot] – Changes the priority of cards for recording.
13. Camera Customization – Fn Buttons Setting Items ([Fn Button Set]/[Setting in PLAY mode]) [1] tab [Playback Mode] • [Magnify from AF Point] ([Magnify from AF Point]: 601) • [LUT View Assist (Monitor)] ([V-LogL View Assist]: 399) • [HLG View Assist (Monitor)] ([HLG View Assist]: 405) • [Anamorphic Desqueeze Display] ([Anamorphic Desqueeze Display]: 408) [Process Image] • [RAW Processing] ([RAW Processing]: 461) • [6K/4K PHOTO Bulk Saving] ([6K/4K PHOTO Bulk Saving]: 207) [Add/Delete Info.
13. Camera Customization – Fn Buttons [Monitor / Display] • [Night Mode] ([Night Mode]: 570) [Card/File] • [Card Slot Change] (Switching the Card to Display: 446) [IN/OUT] • [Wi-Fi] (15.
13. Camera Customization – Fn Buttons Use the Fn Buttons During recording, pressing the Fn buttons enables usage of the functions registered in [Setting in REC mode], and during playback, it enables usage of the functions registered in [Setting in PLAY mode]. 1 2 Press the Fn button. Select a setting item. ≥Press 21 to select a setting item and then press or . ≥Selection is also possible by rotating , or . • Display and selection methods of a setting item differ depending on the menu item.
13. Camera Customization – Fn Buttons Use [Fn3] to [Fn7] (Touch Icons) During recording, you can use the Fn buttons within the Touch Tab. • With the default settings, the Touch Tab is not displayed. Set [Touch Tab] to [ON] in [Touch Settings] in the [Custom] ([Operation]) menu. ([Touch Settings]: 560) 1 Touch [ 2 Touch one of [Fn3] to [Fn7]. ].
13. Camera Customization – [Dial Operation Switch] [Dial Operation Switch] ≥ Register Functions to the Dials: 488 ≥ Temporarily Change Dial Operation: 490 This temporarily changes the functions operated with (rear dial). (front dial) and Register Functions to the Dials Register functions to each of 1 . Select [Dial Operation Switch Setup]. ≥ [ 2 and [ ]/[ ][ ] ] [Dial Set.] [Dial Operation Switch Setup] Register the function. ≥Press 34 to select a function and then press 488 or .
13. Camera Customization – [Dial Operation Switch] Functions That Can Be Registered • [Exposure Comp.] (Exposure Compensation: 270) • [Sensitivity]*1 (ISO Sensitivity: 274) • [White Balance]*2 (White Balance (WB): 279) • [Photo Style] ([Photo Style]: 286) • [Aspect Ratio] ([Aspect Ratio]: 115) • [i.Dynamic Range] ([i.Dynamic Range]: 521) • [Filter Effect] ([Filter Settings]: 294) • [AF Mode] (Selecting the AF Mode: 136) • [Flash Mode] ([Flash Mode]: 310) • [Flash Adjust.] ([Flash Adjust.
13. Camera Customization – [Dial Operation Switch] Temporarily Change Dial Operation Use the Fn button to temporarily change dial operation. 1 2 Set [Dial Operation Switch] to the Fn button. (Fn Buttons: 472) Switch dial operation. 1 ≥Press the Fn button set in Step . ≥A guide will display the functions registered to and . • If no operations are performed, then several seconds later, the guide disappears. 3 Set the registered function. 4 Confirm your selection.
13. Camera Customization – Quick Menu Customization Quick Menu Customization ≥ Register to the Quick Menu: 491 You can change Quick menu items depending on the recording mode. Additionally, you can change the items to display on the Quick menu and their order to suit your preferences. • For information about Quick menu operation methods (Quick Menu: 92) Register to the Quick Menu Change the menus to be displayed in the Quick menu.
13. Camera Customization – Quick Menu Customization 2 Select the item position (1 to 12). 3 Find the function to register. ≥Press 3421 to select the position and then press ≥Selection is also possible by rotating . or . ≥Rotate to select the sub tab where the function to register is categorized (Menu Items That Can Be Registered: 494) and then press or . ≥You can also select by pressing 2 to select the sub tab, pressing 34 or rotating , and then pressing 1.
13. Camera Customization – Quick Menu Customization 4 Register menu items. ≥Press 34 to select an item and then press ≥Selection is also possible by rotating or • Select items with [N] by selecting the item again. 493 or . .
13. Camera Customization – Quick Menu Customization Menu Items That Can Be Registered [1] tab [Image Quality] • [Exposure Comp.] (Exposure Compensation: 270) • [Sensitivity] (ISO Sensitivity: 274) • [White Balance] (White Balance (WB): 279) • [Photo Style] ([Photo Style]: 286) • [Metering Mode] ([Metering Mode]: 253) • [Aspect Ratio] ([Aspect Ratio]: 115) • [Picture Quality] ([Picture Quality]: 117) • [Picture Size] ([Picture Size]: 116) • [Long Exposure NR] ([Long Exposure NR]: 520) • [Min.
13. Camera Customization – Quick Menu Customization [Flash] • [Flash Mode] ([Flash Mode]: 310) • [Flash Adjust.] ([Flash Adjust.]: 314) • [Wireless Flash Setup] (Recording Using a Wireless Flash: 318) [Others (Photo)] • [Drive Mode Setting] (Selecting the Drive Mode: 183) • [Bracketing] (Bracket Recording: 232) • [Silent Mode] ([Silent Mode]: 240) • [Image Stabilizer] (Image Stabilizer: 244) • [Shutter Type] ([Shutter Type]: 241) • [Ex. Tele Conv.
13. Camera Customization – Quick Menu Customization [Others (Video)] • [Image Stabilizer] (Image Stabilizer: 244) • [E-Stabilization (Video)] ([E-Stabilization (Video)]: 247) • [Boost I.S. (Video)] ([Boost I.S.
13. Camera Customization – Quick Menu Customization [Lens / Others] • [Focus Ring Control] ([Focus Ring Control]: 582) • [Step Zoom] ([Power Zoom Lens]: 181) • [Zoom Speed] ([Power Zoom Lens]: 181) • [Lens Information] ([Lens Information]: 250) [Card/File] • [Destination Card Slot] – Changes the priority of cards for recording. This can be used if [Double Card Slot Function] ([Double Card Slot Function]: 119) is set to [Relay Rec]. [IN/OUT] • [Wi-Fi] (15.
13. Camera Customization – Quick Menu Customization Quick Menu Detailed Settings Change the appearance of the Quick menu and the operation of during menu display. [ ][ ] Select [Q.MENU Settings] Changes the appearance of the Quick menu. [Layout Style] [MODE1]: Displays the live view and the menu simultaneously. [MODE2]: Displays the menu in full screen. Changes the operation of [Front Dial Assignment] in the Quick menu. [Item]: Selects menu items. [Value]: Selects setting values.
13. Camera Customization – Custom Mode Custom Mode ≥ Register in Custom Mode: 499 ≥ Using Custom Mode: 502 ≥ Calling Up Settings: 503 Recording modes and menu settings that match your preferences can be registered in Custom mode. You can use registered settings by switching the mode dial to [C1] to [C4] modes. Register in Custom Mode You can register the currently set information of the camera. At the time of purchase, the default settings of the [P] mode menus are registered with all Custom modes.
13. Camera Customization – Custom Mode 3 Register. ≥Select the save-to number and then press or . • A confirmation screen will be displayed. Press [DISP.] to change the Custom mode name. How to enter characters (Entering Characters: 610) • You cannot register [iA] mode in Custom mode.
13. Camera Customization – Custom Mode Custom Mode Detailed Settings You can create additional Custom mode sets, and how long to retain temporarily changed settings details. [ ][ ] Select [Custom Mode Settings] Sets the number of Custom modes that can be [Limit No. of Custom Mode] registered in [C4]. A maximum of 10 sets can be registered; 3 sets are available as default settings. Changes the Custom mode name. A maximum of 22 characters can be entered.
13. Camera Customization – Custom Mode Using Custom Mode 1 Set the mode dial to one of [C1] to [C4]. ≥If [C4], the last-used Custom mode will be called up. [C4] Custom Mode Selection 1 Set the mode dial to [C4]. 2 Press 3 Press 34 to select the Custom mode and then press . or . • The selected Custom mode icon will be displayed on the recording screen.
13. Camera Customization – Custom Mode Calling Up Settings Call up registered Custom mode settings to the selected recording mode and overwrite the current settings with the called up settings. 1 2 3 Set to the mode dial to use. Select [Load Custom Mode]. ≥ [ ][ ] [Load Custom Mode] Select the Custom mode to call up. ≥Select the Custom mode and then press or . • Calling up of Custom modes is not possible between those created from [P]/[A]/ [S]/[M] modes and those created from [ 503 ] mode.
13. Camera Customization – My Menu My Menu ≥ Registration in My Menu: 504 ≥ Edit My Menu: 505 Register frequently-used menus in My Menu. A maximum of 23 items can be registered. Registered menus can be called up from [ ] to [ ]. Registration in My Menu 1 Select [Add]. 2 Register. ≥ [ ][ ] [Add] ≥Select the menu to register and then press 504 or .
13. Camera Customization – My Menu Calling up My Menu Call up the menus registered in My Menu. [ ][ ]/[ ] Registered menus ]/[ Edit My Menu You can reorder the display order of My Menu, and delete unnecessary menus. [ ] Select [ [Add] [Sorting] ] Selects and registers the menus to be displayed in My Menu. Changes the order of My Menu. Select the menu to change, then set the destination. Deletes menus that are registered to My Menu. [Delete] [Delete Item]: Selects the menu, then deletes.
13. Camera Customization – [Save/Restore Camera Setting] [Save/Restore Camera Setting] Saves the camera’s settings information to the card. Saved settings information can be loaded to the camera, letting you set the same settings on multiple cameras. [ ][ ] Select [Save/Restore Camera Setting] Saves the camera’s settings information to the card. • If saving new data, then select [New File], and if overwriting an existing file, select that existing file.
13. Camera Customization – [Save/Restore Camera Setting] • Only settings information from the same model can be loaded. • Up to 10 instances of settings information can be saved on one card.
14. Menu Guide ≥ List of Menu: 509 ≥ [Photo] Menu: 519 ≥ [Video] Menu: 535 ≥ [Custom] Menu: 549 ≥ [Setup] Menu: 584 ≥ [Playback] Menu: 598 ≥ Entering Characters: 610 This chapter provides a list of menus and describes them in detail. • For information about menu operation methods (Menu Operation Methods: 96) • Refer to the “18.
14. Menu Guide – List of Menu List of Menu : Menu items common to the [Photo] menu and [Video] menu. Their settings are synchronized. [Photo] menu [Image Quality] ([Photo] menu ([Image Quality]): 519) ≥ [Photo Style]: 519 ≥ [Metering Mode]: 519 ≥ [Aspect Ratio]: 520 ≥ [Picture Quality]: 520 ≥ [Picture Size]: 520 ≥ [Long Exposure NR]: 520 ≥ [ISO Sensitivity (photo)]: 521 ≥ [Min. Shutter Speed]: 521 ≥ [i.Dynamic Range]: 521 ≥ [Vignetting Comp.
14. Menu Guide – List of Menu [Flash] ([Photo] menu ([Flash]): 526) ≥ [Flash Mode]: 526 ≥ [Firing Mode]: 526 ≥ [Flash Adjust.]: 526 ≥ [Flash Synchro]: 526 ≥ [Manual Flash Adjust.]: 527 ≥ [Auto Exposure Comp.
14. Menu Guide – List of Menu [Video] menu [Image Quality] ([Video] menu ([Image Quality]): 535) ≥ [Exposure Mode]: 535 ≥ [Photo Style]: 535 ≥ [Metering Mode]: 536 ≥ [ISO Sensitivity (video)]: 536 ≥ [Synchro Scan]: 536 ≥ [Flicker Decrease (Video)]: 536 ≥ [Master Pedestal Level]: 537 ≥ [SS/Gain Operation]: 537 ≥ [i.Dynamic Range]: 537 ≥ [Vignetting Comp.]: 537 ≥ [Diffraction Compensation]: 538 ≥ [Filter Settings]: 538 [Image Format] ([Video] menu ([Image Format]): 539) ≥ [Rec.
14. Menu Guide – List of Menu [Audio] ([Video] menu ([Audio]): 543) ≥ [Sound Rec Level Disp.]: 543 ≥ [Mute Sound Input]: 543 ≥ [Sound Rec Gain Level]: 543 ≥ [Sound Rec Level Adj.]: 543 ≥ [Sound Rec Level Limiter]: 544 ≥ [Wind Noise Canceller]: 544 / [Wind Cut]: 544 ≥ [Lens Noise Cut]: 544 ≥ [Special Mic.
14. Menu Guide – List of Menu [Custom] menu [Image Quality] ([Custom] menu ([Image Quality]): 550) ≥ [Photo Style Settings]: 550 ≥ [ISO Increments]: 550 ≥ [Extended ISO]: 551 ≥ [Exposure Offset Adjust.]: 551 ≥ [Color Space]: 552 ≥ [Exposure Comp. Reset]: 552 ≥ [Auto Exposure in P/A/S/M]: 552 ≥ [CreativeVideo Combined Set.
14. Menu Guide – List of Menu [Operation] ([Custom] menu ([Operation]): 560) ≥ [Q.MENU Settings]: 560 ≥ [Touch Settings]: 560 ≥ [Operation Lock Setup]: 561 ≥ [Fn Button Set]: 561 ≥ [WB/ISO/Expo. Button]: 562 ≥ [ISO Displayed Setting]: 562 ≥ [Exposure Comp. Disp. Setting]: 562 ≥ [Dial Set.]: 563 ≥ [Joystick Setting]: 564 ≥ [Video Rec.
14.
14. Menu Guide – List of Menu [Setup] menu [Card/File] ([Setup] menu ([Card/File]): 584) ≥ [Card Format]: 584 ≥ [Double Card Slot Function]: 584 ≥ [Folder / File Settings]: 584 ≥ [File Number Reset]: 585 ≥ [Copyright Information]: 585 [Monitor / Display] ([Setup] menu ([Monitor / Display]): 586) ≥ [Power Save Mode]: 586 ≥ [Monitor Frame Rate]: 586 ≥ [LVF Frame Rate]: 587 ≥ [Monitor Settings]/[Viewfinder]: 587 ≥ [Monitor Backlight]/[LVF Luminance]: 588 ≥ [Eye Sensor]: 588 ≥ [Level Gauge Adjust.
14.
14. Menu Guide – List of Menu [Playback] menu [Playback Mode] ([Playback] menu ([Playback Mode]): 600) ≥ [Playback Mode]: 600 ≥ [Slide Show]: 600 ≥ [Rotate Disp.
14. Menu Guide – [Photo] Menu [Photo] Menu ≥ [Photo] menu ([Image Quality]): 519 ≥ [Photo] menu ([Focus]): 524 ≥ [Photo] menu ([Flash]): 526 ≥ [Photo] menu ([Others (Photo)]): 529 : Menu items common to the [Photo] menu and [Video] menu. Their settings are synchronized. [Photo] menu ([Image Quality]) : Default settings [Photo Style] [Standard] / [Vivid] / [Natural] / [L.ClassicNeo] / [Flat] / [Landscape] / [Portrait] / [Monochrome] / [L.Monochrome] / [L.Monochrome D] / [L.
14. Menu Guide – [Photo] Menu [Aspect Ratio] [4:3]/[3:2]/[16:9]/[1:1] You can select the image aspect ratio. ([Aspect Ratio]: 115) [Picture Quality] [FINE]/[STD.]/[RAWiFINE]/[RAWiSTD.]/[RAW] Set the compression rate used for storing pictures. ([Picture Quality]: 117) [Picture Size] [L]/[M]/[S] Sets the picture’s image size. ([Picture Size]: 116) [Long Exposure NR] [ON]/[OFF] The camera automatically removes noise generated when recording images with a slow shutter speed.
14. Menu Guide – [Photo] Menu [ISO Sensitivity (photo)] [ISO Auto Lower Limit Setting] [200] to [12800] [ISO Auto Upper Limit Setting] [AUTO]/[400] to [25600] Sets the lower and upper limits for ISO sensitivity when ISO sensitivity is set to [AUTO]. [Min. Shutter Speed] [AUTO]/[1/16000] to [1/1] Sets the minimum shutter speed when the ISO sensitivity is set to [AUTO]. • The shutter speed may become slower than the set value in recording situations where correct exposure cannot be achieved. [i.
14. Menu Guide – [Photo] Menu [Vignetting Comp.] [ON]/[OFF] When the screen periphery darkens as a result of the lens characteristics, you can record pictures with the brightness of the screen periphery corrected. • Compensation effect may not be achieved depending on the recording conditions. • Noise in the periphery of the picture may stand out with higher ISO sensitivity. • When the following function is being used, [Vignetting Comp.] is not available: – [Ex. Tele Conv.
14. Menu Guide – [Photo] Menu [Filter Settings] [Filter Effect] [ON]/[OFF]/[SET] [Simultaneous Record w/o Filter] [ON]/[OFF] This mode records with additional image effects (filters).
14. Menu Guide – [Photo] Menu [Photo] menu ([Focus]) : Default settings [AF Custom Setting(Photo)] [Set 1]/[Set 2]/[Set 3]/[Set 4] Select features of AF operation when recording using [AFC] that are appropriate for the subject and scene. ([AF Custom Setting(Photo)]: 133) [AF Assist Light] [ON]/[OFF] When recording in low light conditions, the AF assist light turns on when you press the shutter button halfway, making it easier for the camera to focus.
14. Menu Guide – [Photo] Menu [Focus Peaking] [ON]/[OFF] [Focus Peaking Sensitivity] [SET] [Display Color] [Display During AFS] During MF operation, in-focus portions (portions on the screen with clear outlines) are highlighted with color. • If the [Focus Peaking Sensitivity] is adjusted to the negative direction, portions to be highlighted are reduced, allowing you to achieve a more precise focus. • With [Display Color], you can set the display color of the in-focus portion.
14. Menu Guide – [Photo] Menu [Photo] menu ([Flash]) : Default settings [Flash Mode] [ ]/[ ]/[ ]/[ ]/[ ] Sets the flash mode. ([Flash Mode]: 310) [Firing Mode] [TTL]/[MANUAL] You can select whether to set the flash output automatically or manually. ([Firing Mode]/[Manual Flash Adjust.]: 312) [Flash Adjust.] [j3 EV] to [i3 EV] ([n0 EV]) When [Firing Mode] is set to [TTL], you can adjust the flash output. ([Flash Adjust.
14. Menu Guide – [Photo] Menu [Manual Flash Adjust.] [1/128] to [1/1] When [Firing Mode] is set to [MANUAL], you can set the flash output. ([Firing Mode]/[Manual Flash Adjust.]: 312) [Auto Exposure Comp.] [ON]/[OFF] Automatically adjust the flash output in conjunction with the exposure compensation value. ([Auto Exposure Comp.]: 317) [Wireless] [ON]/[OFF] Enables recording using a wireless flash.
14. Menu Guide – [Photo] Menu [Wireless FP] [ON]/[OFF] Uses FP firing for an external flash when recording with a wireless flash. ([Wireless FP]: 324) [Communication Light] [HIGH]/[STANDARD]/[LOW] Set the strength of communication light. ([Communication Light]: 324) [Wireless Setup] [Firing Mode]/[Flash Adjust.]/[Manual [External Flash] Flash Adjust.] [Firing Mode]/[Flash Adjust.]/[Manual [A Group]/[B Group]/[C Group] Flash Adjust.] Sets details for wireless flash recording.
14. Menu Guide – [Photo] Menu [Photo] menu ([Others (Photo)]) : Default settings [Bracketing] [Bracketing Type] [ ]/[ ]/[ ]/[ ]/[ ]/[OFF] [More Settings] You can take multiple pictures while automatically adjusting a setting. (Bracket Recording: 232) [Silent Mode] [ON]/[OFF] Disables all operation sounds and light output at once. ([Silent Mode]: 240) [Image Stabilizer] [Operation Mode] [ [E-Stabilization (Video)] [ON]/[OFF] [Boost I.S.
14. Menu Guide – [Photo] Menu [Burst Rate] [H]/[M]/[L] Sets the burst recording operation. (Taking Burst Pictures: 185) [Shutter Type] [AUTO]/[MECH.]/[EFC]/[ELEC.]/[ELEC.+NR] Selects the shutter type to use for taking pictures. ([Shutter Type]: 241) [Shutter Delay] [8SEC]/[4SEC]/[2SEC]/[1SEC]/[OFF] To reduce camera shake and shutter-induced blur, the shutter is released after the specified time has passed since the shutter button was pressed.
14. Menu Guide – [Photo] Menu [Ex. Tele Conv.] [ZOOM]/[TELE CONV.]/[OFF] You can take pictures that are further enlarged beyond what is available with the optical zoom, without any deterioration in image quality. (Extended Tele Conversion: 177) [Time Lapse/Animation] [Time Lapse Shot] [Mode] [Stop Motion Animation] Time Lapse Shot automatically starts/stops recording at a set recording interval. Stop Motion Animation enables you to take pictures while moving the subject little by little.
14. Menu Guide – [Photo] Menu [6K/4K PHOTO] [Picture Size / Burst Speed] [Rec Method] [Pre-Burst Recording] [6K 18M]/[4K H 8M]/[4K 8M] [6K/4K Burst]/[6K/4K Burst(S/S)]/[6K/ 4K Pre-Burst] [ON]/[OFF] Sets 6K/4K photos. You can save pictures extracted from a burst file taken using high-speed burst. (6K/4K Photo Recording: 191) [Post-Focus] [6K 18M]/[4K 8M] Taking burst pictures with the same image quality as 6K/4K photos while automatically changing the focus point.
14. Menu Guide – [Photo] Menu • After selecting [Start], pressing the shutter button fully starts multiple exposure. • Preview is displayed for each recording, and the following operations are available: 1H[W 5HWDNH ([LW – [Next] (You can also perform the same operation by pressing the shutter button halfway.) – [Retake] – [Exit]: Records the picture, and finishes multiple exposure recording. • To finish multiple exposure recording before starting the recording, press [Q] on the recording screen.
14. Menu Guide – [Photo] Menu [Time Stamp Rec.] [ON]/[OFF] Records the recorded date and time superimposed on the images. • You cannot delete recording dates after superimposing them. • The recorded date and time are not recorded in 6K/4K burst files or RAW images. • When the following functions are being used, [Time Stamp Rec.
14. Menu Guide – [Video] Menu [Video] Menu ≥ [Video] menu ([Image Quality]): 535 ≥ [Video] menu ([Image Format]): 539 ≥ [Video] menu ([Focus]): 541 ≥ [Video] menu ([Audio]): 543 ≥ [Video] menu ([Others (Video)]): 546 : Menu items common to the [Photo] menu and [Video] menu. Their settings are synchronized. [Video] menu ([Image Quality]) : Default settings [Exposure Mode] [P]/[A]/[S]/[M] Sets the exposure mode to use in [ ] mode.
14. Menu Guide – [Video] Menu [Metering Mode] [ ]/[ ]/[ ]/[ ] Type of optical measurement to measure brightness can be changed. ([Metering Mode]: 253) [ISO Sensitivity (video)] [ISO Auto Lower Limit Setting] [200] to [6400] [ISO Auto Upper Limit Setting] [AUTO]/[400] to [12800] Sets the lower and upper limits for ISO sensitivity when ISO sensitivity is set to [AUTO].
14. Menu Guide – [Video] Menu [Master Pedestal Level] [j15] to [15] ([0]) You can adjust the black level, which serves as the reference for images. ([Master Pedestal Level]: 359) [SS/Gain Operation] [SEC/ISO]/[ANGLE/ISO]/[SEC/dB] You can switch the units of shutter speed values and gain (sensitivity) values. ([SS/Gain Operation]: 371) [i.
14. Menu Guide – [Video] Menu [Diffraction Compensation] [AUTO]/[OFF] The camera raises the image resolution by correcting the blurriness caused by diffraction when the aperture is closed. ([Diffraction Compensation]: 522) [Filter Settings] [Filter Effect] [ON]/[OFF]/[SET] [Simultaneous Record w/o Filter] [ON]/[OFF] This mode records with additional image effects (filters).
14. Menu Guide – [Video] Menu [Video] menu ([Image Format]) : Default settings [Rec. File Format] [MP4]/[MOV] Sets the video recording file format. ([Rec. File Format]: 338) [Image Area of Video] [FULL]/[PIXEL/PIXEL] Sets the image area during video recording. ([Image Area of Video]: 349) [Rec Quality] Sets the video recording image quality. ([Rec Quality]: 339) [Rec Quality (My List)] Calls up a recording quality registered in My List.
14. Menu Guide – [Video] Menu [Time Code] [Time Code Display] [ON]/[OFF] [Count Up] [REC RUN]/[FREE RUN] [Reset] [Time Code Value] [Manual Input] [Current Time] [Time Code Mode] [DF]/[NDF] [HDMI Time Code Output] [ON]/[OFF] Sets the recording, display, and output of the time code. (Time Code: 351) [Luminance Level] [0-255]/[16-235]/[16-255] You can set the luminance range to suit the purpose of video recording.
14. Menu Guide – [Video] Menu [Video] menu ([Focus]) : Default settings [AF Custom Setting(Video)] [ON]/[OFF] [SET] [AF Speed]/[AF Sensitivity] You can fine-adjust the focusing method for video recording using [Continuous AF]. ([AF Custom Setting(Video)]: 356) [Continuous AF] [MODE1]/[MODE2]/[OFF] You can select how to set the focus in AF when recording videos.
14. Menu Guide – [Video] Menu [Focus Peaking] [ON]/[OFF] [Focus Peaking Sensitivity] [SET] [Display Color] [Display During AFS] During MF operation, in-focus portions (portions on the screen with clear outlines) are highlighted with color. ([Focus Peaking]: 525) [1-Area AF Moving Speed] [FAST]/[NORMAL] Sets the speed when moving a single AF area.
14. Menu Guide – [Video] Menu [Video] menu ([Audio]) : Default settings [Sound Rec Level Disp.] [ON]/[OFF] The sound recording level is displayed on the recording screen. ([Sound Rec Level Disp.]: 365) [Mute Sound Input] [ON]/[OFF] This mutes audio input. ([Mute Sound Input]: 366) [Sound Rec Gain Level] [STANDARD]/[LOW] This switches the gain of audio input. ([Sound Rec Gain Level]: 366) [Sound Rec Level Adj.] [MUTE], [j18dB] to [i12dB] ([0dB]) Manually adjust the sound recording level.
14. Menu Guide – [Video] Menu [Sound Rec Level Limiter] [ON]/[OFF] The sound recording level is adjusted automatically to minimize sound distortion (crackling noise). ([Sound Rec Level Limiter]: 367) [Wind Noise Canceller] [HIGH]/[STANDARD]/[OFF] This reduces the wind noise coming into the built-in microphone while maintaining sound quality. ([Wind Noise Canceller]: 368) [Wind Cut] [HIGH]/[STANDARD]/[LOW]/[OFF] This reduces wind noise when an external microphone is connected.
14. Menu Guide – [Video] Menu [XLR Mic Adaptor Setting] [96kHz/24bit]/[48kHz/24bit]/[48kHz/16bit]/[OFF] Sets the audio input for when an XLR Microphone Adaptor (DMW-XLR1: optional) is attached. (XLR Microphone Adaptor (Optional): 440) [Sound Output] [REALTIME]/[REC SOUND] Sets the audio output method when headphones are connected. (Switching the Sound Output Method: 443) [Headphone Volume] [0] to [LEVEL15] ([LEVEL3]) Adjusts the volume when headphones are connected.
14. Menu Guide – [Video] Menu [Video] menu ([Others (Video)]) : Default settings [Silent Mode] [ON]/[OFF] Disables all operation sounds and light output at once. ([Silent Mode]: 240) [Image Stabilizer] [Operation Mode] [ [E-Stabilization (Video)] [ON]/[OFF] [Boost I.S. (Video)] [ON]/[OFF] [Anamorphic (Video)] [ [Lens Information] [Lens1] to [Lens12] ([Lens1]) ]/[ ]/[ ]/[ ]/[ ]/[OFF] ]/[ ]/[ ]/[OFF] Configures image stabilizer settings.
14. Menu Guide – [Video] Menu [Focus Transition] [Start] [Focus Pull Setting] [1]/[2]/[3] [Focus Transition Speed] [SH]/[H]/[M]/[L]/[SL] [Focus Transition Rec] [1]/[2]/[3]/[OFF] [Focus Transition Wait] [10SEC]/[5SEC]/[OFF] Smoothly transitions the focus position from the current position to a position registered in advance. ([Focus Transition]: 387) [Loop Recording (video)] [ON]/[OFF] When the recording fills the card to capacity, recording continues while deleting older data.
14. Menu Guide – [Video] Menu [Live Cropping] [40SEC]/[20SEC]/[OFF] By cropping a part of the range displayed in the live view, it is possible to record FHD video that incorporates panning and zooming with the camera staying in a fixed position. ([Live Cropping]: 391) [Time Stamp Rec.] [ON]/[OFF] Records the recorded date and time superimposed on the images. ([Time Stamp Rec.
14.
14. Menu Guide – [Custom] Menu [Custom] menu ([Image Quality]) : Default settings [Photo Style Settings] [Vivid]/[Natural]/[L.ClassicNeo]/[Flat]/ [Landscape]/[Portrait]/[L.Monochrome]/ [L.Monochrome D]/[L.Monochrome S]/ [Show/Hide Photo Style] [Cinelike D2]/[Cinelike V2]/[Like709]/ [V-Log L]/[Hybrid Log Gamma]/[MY PHOTO STYLE 1] to [MY PHOTO STYLE 10] Sets Photo Style items to be displayed on the menu.
14. Menu Guide – [Custom] Menu [Extended ISO] [ON]/[OFF] Setting of ISO sensitivity to a minimum of [ISO100] is possible. [Exposure Offset Adjust.] [Multi Metering] [j1EV] to [i1EV] ([n0EV]) [Center Weighted] [j1EV] to [i1EV] ([n0EV]) [Spot] [j1EV] to [i1EV] ([n0EV]) [Highlight Weighted] [j1EV] to [i1EV] ([n0EV]) Adjusts the exposure level that is the standard exposure for each item of [Metering Mode].
14. Menu Guide – [Custom] Menu [Color Space] [sRGB]/[AdobeRGB] This sets the method for correcting the color reproduction of the recorded images on the screens of a PC or on a device such as a printer. [sRGB]: This is widely used in PCs and similar devices. [AdobeRGB]: AdobeRGB is mainly used for business purposes such as professional printing because it has a greater range of reproducible colors than sRGB. • Set to [sRGB] if you are not very familiar with AdobeRGB.
14. Menu Guide – [Custom] Menu [CreativeVideo Combined Set.] [F/SS/ISO/Exposure Comp.] [ ]/[ ] [White Balance] [ ]/[ ] [Photo Style] [ ]/[ ] [Metering Mode] [ ]/[ ] [AF Mode] [ ]/[ ] Content set in [ ] mode can be separated from when taking pictures.
14. Menu Guide – [Custom] Menu [Custom] menu ([Focus/Shutter]) : Default settings [Focus/Shutter Priority] [AFS] [FOCUS]/[BALANCE]/[RELEASE] [AFC] [FOCUS]/[BALANCE]/[RELEASE] This sets whether to give priority to focus or shutter release during AF. [FOCUS]: Disables recording when focus is not achieved. [BALANCE]: Performs recording while controlling the balance between focusing and shutter release timing. [RELEASE]: Enables recording even when focus is not achieved.
14. Menu Guide – [Custom] Menu [AF+MF] [ON]/[OFF] When the focus mode is set to [AFS], you can fine-adjust the focus manually during AF lock.
14. Menu Guide – [Custom] Menu [MF Guide] [ ]/[ ]/[OFF] * Default setting specifications vary depending on the country or area where the camera was purchased. During MF, MF Guide, which acts as a guide to recording distance, is displayed on the screen. You can select from meters or feet for the display unit. • The distance index of the [MF Guide] depends on the lens and zoom position. If the lens does not support the display of the distance index, only the scale is displayed on the MF guide.
14. Menu Guide – [Custom] Menu [Pinpoint AF Setting] [Pinpoint AF Time] [LONG]/[MID]/[SHORT] [Pinpoint AF Display] [FULL]/[PIP] Changes enlarged screen settings displayed when AF mode is [ ]. [Pinpoint AF Time]: Sets the time for which the screen is enlarged when the shutter button is pressed halfway. [Pinpoint AF Display]: Sets the display method (full screen mode/windowed mode) of the enlarged screen.
14. Menu Guide – [Custom] Menu [Assign REC to Shutter Button] [ON]/[OFF] Use the shutter button for the start/stop operation of video recording in the [ ] mode. The start/stop operation of video recording using the shutter button can be disabled when set to [OFF]. [Quick AF] [ON]/[OFF] When the amount of camera shake becomes small, the camera will automatically adjust the focus and focus adjustment will then be quicker when the shutter button is pressed. • The battery will drain faster than usual.
14. Menu Guide – [Custom] Menu [AFC Start Point (225-Area)] [ON]/[OFF] When the focus mode is set to [AFC] in the [ area to start [AFC].
14. Menu Guide – [Custom] Menu [Custom] menu ([Operation]) : Default settings [Q.MENU Settings] [Layout Style] [MODE1]/[MODE2] [Front Dial Assignment] [Item]/[Value] [Item Customize (Photo)] [Item Customize (Video)] Customizes the Quick menu. (Quick Menu Detailed Settings: 498) [Touch Settings] [Touch Screen] [ON]/[OFF] [Touch Tab] [ON]/[OFF] [Touch AF] [AF]/[AF+AE] [EXACT]/[OFFSET1] to [OFFSET7]/ [Touch Pad AF] [OFF] Enables touch operation on the monitor display.
14. Menu Guide – [Custom] Menu [Operation Lock Setup] [Cursor] [ ]/[ ] [Joystick] [ ]/[ ] [Touch Screen] [ ]/[ ] [Dial] [ ]/[ ] [DISP. Button] [ ]/[ ] This sets the control functions to be disabled with the Fn button [Operation Lock]. (Only for recording screen) [Cursor]: Cursor buttons, [MENU/SET] button, and [Joystick]: Joystick [Touch Screen]: Touch screen [Dial]: , , and [DISP. Button]: [DISP.
14. Menu Guide – [Custom] Menu [WB/ISO/Expo. Button] [WHILE PRESSING]/[AFTER PRESSING1]/[AFTER PRESSING2] This sets the operation to be performed when [WB] (White balance), [ISO] (ISO sensitivity) or [ ] (Exposure compensation) is pressed. [WHILE PRESSING]: Allows you to change the setting while pressing and holding the button. Release the button to confirm the settings value, and to return to the recording screen. [AFTER PRESSING1]: Press the button to change settings.
14. Menu Guide – [Custom] Menu [Dial Set.] [SET1]/[SET2]/[SET3]/[SET4]/[SET5] [Assign Dial (F/SS)] Sets the operations to be assigned to the dials in [P]/[A]/[S]/[M] modes.
14. Menu Guide – [Custom] Menu [Exposure Comp.] [ Assigns exposure compensation to or ]/[ ]/[OFF] . (Except in [M] mode) • The [Assign Dial (F/SS)] setting takes priority. [Dial Operation Switch Setup] [ ] [ ] In the Fn button [Dial Operation Switch], this sets the functions to be registered temporarily to or . (Register Functions to the Dials: 488) [Rotation (Menu Operation)] [ [ ]/[ ]/[ ]/ ] Changes the rotational direction of the dials when operating menus.
14. Menu Guide – [Custom] Menu [Custom] menu ([Monitor / Display (Photo)]) : Default settings [Auto Review] [Duration Time (photo)] [HOLD]/[5SEC] to [0.5SEC]/[OFF] [Duration Time (6K/4K PHOTO)] [HOLD]/[OFF] [Duration Time (Post-Focus)] [HOLD]/[OFF] [Playback Operation Priority] [ON]/[OFF] This displays an image immediately after it is recorded. [Duration Time (photo)]: Sets the Auto Review when taking pictures. [Duration Time (6K/4K PHOTO)]: Sets the Auto Review when recording 6K/4K photos.
14. Menu Guide – [Custom] Menu [Constant Preview] [ON]/[OFF] [SET] [Effect] [Preview While MF Assist] You can always confirm the effects of aperture on the recording screen when in [A]/ [M] mode. You can also confirm the shutter speed at the same time when in [M] mode. • You can set the combination of the aperture effect and the shutter speed effect in [Effect]. • Preview also operates in the MF Assist screen when [Preview While MF Assist] is set to [ON].
14. Menu Guide – [Custom] Menu [Histogram] [ON]/[OFF] This displays the histogram. Turning this [ON] displays the histogram transition screen. Press 3421 to set the position. • A histogram is a graph that displays brightness along the horizontal axis, and the number of pixels at each brightness level on the vertical axis. By looking at the distribution of the graph, you can determine the current exposure.
14. Menu Guide – [Custom] Menu [Photo Grid Line] [ ]/[ ]/[ ]/[OFF] Sets the grid line pattern to be displayed on the recording screen. When using [ • When using [ ], you can press 3421 to set the position. ], you can also drag [ ] on the grid lines on the recording screen to move the position. [AF Area Display] [ON]/[OFF] Displays the AF areas for the [ ], [ ], [ ], [ ], [ ヤヒ ] to [ ヤピ ] AF modes.
14. Menu Guide – [Custom] Menu [Live View Boost] [MODE1]/[MODE2]/[OFF] [SET] [P/A/S/M]/[M] Displays the screen brighter to make it easier to check subjects and compositions even in low-light environment. [MODE1]: Setting for low brightness, with priority given to a soft display. [MODE2]: Setting for high brightness, with priority given to image visibility. • You can change the recording mode in which [Live View Boost] works by using [SET]. • This mode does not affect recorded images.
14. Menu Guide – [Custom] Menu [Night Mode] [Monitor] [ON]/[OFF] [LVF] [ON]/[OFF] Displays the monitor and viewfinder in red. In dark environments, this reduces brightness of the screen that can make the surroundings difficult to see. You can also set the luminance of the red display. 1 Press 3421 to select [ON] on the monitor or viewfinder (LVF). 2 Press [DISP.] to display the brightness adjustment screen.
14. Menu Guide – [Custom] Menu [LVF/Monitor Disp. Set] [LVF Disp. Set] [ ]/[ ] [Monitor Disp. Set] [ ]/[ ] Selects whether to show the live view without covering the information display, or to display over the entire screen. [ ]: Scales down images slightly so you can better review the composition of the images. [ ]: Scales images to fill the entire screen so you can see their details.
14. Menu Guide – [Custom] Menu [Expo.Meter] [ON]/[OFF] This displays the exposure meter. • Set to [ON] to display the exposure meter when performing Program Shift, setting aperture, and setting shutter speed. • If no operations are performed for a certain period of time, the exposure meter disappears. [Focal Length] [ON]/[OFF] Displays the focal length on the recording screen during zoom control.
14. Menu Guide – [Custom] Menu [Sheer Overlay] [ON]/[OFF] [Transparency] [Image Select] [SET] [Reset at Power Off] [Disp. Image (shutter-press)] Displays recorded pictures by overlapping on the recording screen. • Use [Image Select] to select the pictures to be displayed. Press 21 to select pictures and then press or to confirm. • If you set [Disp. Image (shutter-press)] to [OFF], [Sheer Overlay] is canceled while the shutter button is being pressed halfway or pressed fully.
14. Menu Guide – [Custom] Menu [Level Gauge] [ON]/[OFF] Displays the level gauge which is useful in correcting camera tilt. (A) (B) (C) (A) Horizontal (B) Vertical (C) Green (no tilt) • Even after correcting the tilt, there may still be an error of approx. n1o. • When the camera is tilted significantly upwards or downwards, the level gauge may not be displayed correctly. • You can adjust the level gauge and reset the adjusted values in [Level Gauge Adjust.] in the [Setup] ([Monitor / Display]) menu.
14. Menu Guide – [Custom] Menu [Show/Hide Monitor Layout] [Control Panel] [ON]/[OFF] [Black Screen] [ON]/[OFF] Displays the control panel and black screen when switching between displays using [DISP.] button.
14. Menu Guide – [Custom] Menu [Custom] menu ([Monitor / Display (Video)]) : Default settings [V-LogL View Assist] [Read LUT File] [LUT Select] [LUT View Assist (Monitor)] [ON]/[OFF] [LUT View Assist (HDMI)] [ON]/[OFF] You can show images with LUT data applied on the monitor/viewfinder, or output them via HDMI.
14. Menu Guide – [Custom] Menu [Monochrome Live View] [ON]/[OFF] You can display the recording screen in black and white. • If you use the HDMI output during recording, the output image will not be displayed in black and white. • [Monochrome Live View] is not available when [Night Mode] is used. [Center Marker] [ON]/[OFF] The center of the recording screen will be displayed as [i].
14. Menu Guide – [Custom] Menu [WFM/Vector Scope] [WAVE]/[VECTOR]/[OFF] This displays the waveform monitor or the vector scope on the recording screen. ([WFM/Vector Scope]: 372) [Color Bars] [SMPTE]/[EBU]/[ARIB] The color bars are displayed on the recording screen. (Color bars/Test Tone: 381) [Video-Priority Display] [ON]/[OFF] When in [iA]/[P]/[A]/[S]/[M] modes, switch the recording screen display and the control panel to suit video recording, as with the [ ] mode.
14. Menu Guide – [Custom] Menu [Red REC Frame Indicator] [ON]/[OFF] A red frame is displayed on the recording screen that indicates that video is being recorded. [Streaming Blue Frame Indicator] [ON]/[OFF] Displays a blue frame on the screen during streaming.
14. Menu Guide – [Custom] Menu [Custom] menu ([IN/OUT]) : Default settings [HDMI Rec Output] [Info Display] [Down Convert] [ON]/[OFF] [AUTO]/[4K/30p]([4K/25p])/[1080p]/ [1080i]/[OFF] [HDMI Recording Control] [ON]/[OFF] [Sound Down Convert] [AUTO]/[OFF] [Sound Output (HDMI)] [ON]/[OFF] [HDMI MF Assist Output] [ON]/[OFF] Sets HDMI output during recording.
14. Menu Guide – [Custom] Menu [Custom] menu ([Lens / Others]) : Default settings [Lens Focus Resume] [ON]/[OFF] The camera saves the focus position when you turn it off. When an interchangeable lens that is compatible with power zoom is in use, the zoom position is also saved. [Power Zoom Lens] [Step Zoom] [Zoom Speed] [Zoom Ring] [ON]/[OFF] [Photo]: [H]/[M]/[L] [Video]: [H]/[M]/[L] [ON]/[OFF] Sets the screen display and operation when using an interchangeable lens compatible with power zoom.
14. Menu Guide – [Custom] Menu [Aperture Ring Increment] [SMOOTH]/[1/3EV] [SMOOTH]: You can finely adjust the aperture value. [1/3EV]: You can adjust the aperture value in increments of 1/3 EV. You can change the aperture adjustment increment by operating the aperture ring. • This setting is available when an interchangeable lens that supports a click-less aperture ring (H-X1025: optional) is attached (As of May 2021).
14. Menu Guide – [Custom] Menu [Lens Information] [Lens1] to [Lens12] ([Lens1]) When using a lens that does not have a communication function with the camera, register the lens information in the camera. • This is linked with [Lens Information] in [Image Stabilizer] under the [Photo] ([Others (Photo)]) menu. ([Lens Information]: 250) [Lens Info.
14. Menu Guide – [Setup] Menu [Setup] Menu ≥ [Setup] menu ([Card/File]): 584 ≥ [Setup] menu ([Monitor / Display]): 586 ≥ [Setup] menu ([IN/OUT]): 589 ≥ [Setup] menu ([Setting]): 593 ≥ [Setup] menu ([Others]): 595 [Setup] menu ([Card/File]) : Default settings [Card Format] [Card Slot 1]/[Card Slot 2] Formats the card (initialization).
14. Menu Guide – [Setup] Menu [File Number Reset] [Card Slot 1]/[Card Slot 2] Resets the file number of the next recording to 0001. ([File Number Reset]: 124) [Copyright Information] [Artist] [ON]/[OFF]/[SET] [Copyright Holder] [ON]/[OFF]/[SET] [Display Copyright Info.] The registered names of the artist and the copyright holder are recorded in the Exif data of the image. • You can register each name from [SET] in [Artist] and [Copyright Holder].
14. Menu Guide – [Setup] Menu [Setup] menu ([Monitor / Display]) : Default settings [Power Save Mode] [Sleep Mode] [10MIN.]/[5MIN.]/[2MIN.]/[1MIN.]/[OFF] [Sleep Mode(Wi-Fi)] [ON]/[OFF] [Auto LVF/Monitor Off] [5MIN.]/[2MIN.]/[1MIN.]/[OFF] [Power Save LVF Shooting] [Time to Sleep] [Method of Activation] This is a function to automatically turn the camera to sleep (power save) status or turn off the viewfinder/monitor if no operation is performed for a set time.
14. Menu Guide – [Setup] Menu [LVF Frame Rate] [60fps]/[120fps] Sets the display speed for live view on the viewfinder when recording pictures. [60fps]: Reduces the power consumption for a longer operating time. [120fps]: Enables smooth display of movements. • [LVF120] is displayed on the viewfinder when it is displayed at [120fps].
14. Menu Guide – [Setup] Menu [Monitor Backlight]/[LVF Luminance] [AUTO]/[j3] to [i3] Adjusts monitor/viewfinder luminance. [AUTO]: The brightness is adjusted automatically depending on how bright it is around the camera. • Adjusts the monitor luminance when displaying the monitor, and the viewfinder luminance when displaying the viewfinder. • When either [AUTO] is set, or the adjusted value is set to positive side, the usage period will shorten.
14. Menu Guide – [Setup] Menu [Setup] menu ([IN/OUT]) : Default settings [Beep] [Beep Volume] [ ] (High)/[ ] (Low)/[ ] (Off) [AF Beep Volume] [ ] (High)/[ ] (Low)/[ ] (Off) [ [AF Beep Tone] [E-Shutter Vol] ] (Pattern 3) [ ] (High)/[ [ [E-Shutter Tone] ] (Pattern 1)/[ [ [ ] (Pattern 2)/ ] (Low)/[ ] (Pattern 1)/[ ] (Off) ] (Pattern 2)/ ] (Pattern 3) Sets the beep sounds, AF beep, and electronic shutter sounds.
14. Menu Guide – [Setup] Menu [Bluetooth] [Bluetooth] (Connecting to a Smartphone (Bluetooth Connection): 616) [Send Image (Smartphone)] ([Smartphone]: 652) [Remote Wakeup] ([Remote Wakeup]: 645) [Returning from Sleep Mode] (Shortening the Return Time from [Sleep Mode]: 637) [Auto Transfer] ([Auto Transfer]: 640) [Location Logging] ([Location Logging]: 643) [Auto Clock Set] ([Auto Clock Set]: 646) [Wi-Fi network settings] [Wi-Fi network settings]: Registers the Wi-Fi access point.
14. Menu Guide – [Setup] Menu [USB Power Supply] [ON]/[OFF] Provides power from the USB connection cable. • Even if this item is set to [OFF], power will be supplied when the AC adaptor is connected. [Battery Use Priority] [BODY]/[BG] Selects which battery to use first when the batteries are installed in both the camera and the Battery Grip.
14. Menu Guide – [Setup] Menu [HLG View Assist (HDMI)] [AUTO]/[MODE1]/[MODE2]/[OFF] At recording or playback of HLG video, this converts their color gamut and brightness for display. • This is linked with [HDMI] in [HLG View Assist] under the [Custom] ([Monitor / Display (Video)]) menu. ([HLG View Assist]: 405) [VIERA Link (CEC)] [ON]/[OFF] You can use the device remote control to operate the camera when it is connected to a VIERA Link compatible device using an HDMI cable.
14. Menu Guide – [Setup] Menu [Setup] menu ([Setting]) [Save to Custom Mode] [C1]/[C2]/[C3]/[C4-1] to [C4-10] You can register the currently set information of the camera. (Register in Custom Mode: 499) [Load Custom Mode] [C1]/[C2]/[C3]/[C4-1] to [C4-10] Calls up registered Custom mode settings to the selected recording mode and overwrites the current settings with called up settings. (Calling Up Settings: 503) [Custom Mode Settings] [Limit No.
14. Menu Guide – [Setup] Menu [Save/Restore Camera Setting] [Save]/[Load]/[Delete]/[Keep Settings While Format] Saves the camera’s settings information to the card. Saved settings information can be loaded to the camera, letting you set the same settings on multiple cameras. ([Save/Restore Camera Setting]: 506) [Reset] Returns the camera to its default settings.
14. Menu Guide – [Setup] Menu [Setup] menu ([Others]) [Clock Set] Sets the date and time. (Clock Set: 71) [Time Zone] Sets the time zone. 1 Press 21 to select the time zone and then press or to confirm. (A) (B) (A) Current time (B) Time difference from GMT (Greenwich Mean Time) • If you are using Daylight Savings [ ], press 3. (The time will move forward by 1 hour.) To return to the normal time, press 3 again.
14. Menu Guide – [Setup] Menu [System Frequency] [59.94Hz (NTSC)]/[50.00Hz (PAL)]/[24.00Hz (CINEMA)] * Default setting specifications vary depending on the country or area where the camera was purchased. This changes the system frequency of videos that are recorded and played back. ([System Frequency]: 337) [Pixel Refresh] This optimizes the image sensor and image processing. • The image sensor and image processing are optimized when the camera is purchased.
14. Menu Guide – [Setup] Menu [Language] This set the language displayed on the screen. • If you set a different language by mistake, select [ ] from the menu icons to set the desired language. [Firmware Version] [Firmware Update]/[Software info] You can check the firmware versions of the camera and lens. In addition, you can update the firmware, and display information about the camera software. [Firmware Update]: Updates firmware. 1 Download the firmware.
14. Menu Guide – [Playback] Menu [Playback] Menu ≥ How to Select an Image(s) in the [Playback] menu: 598 ≥ [Playback] menu ([Playback Mode]): 600 ≥ [Playback] menu ([Process Image]): 603 ≥ [Playback] menu ([Add/Delete Info.]): 605 ≥ [Playback] menu ([Edit Image]): 606 ≥ [Playback] menu ([Others]): 609 How to Select an Image(s) in the [Playback] menu Follow the steps below when the image selection screen is displayed. • Images are displayed separately by card slot.
14. Menu Guide – [Playback] Menu When [Multi] has been selected 1 Press 3421 to select the image and then press • The setting is canceled when 2 or or (repeat). is pressed again. Press [DISP.] to execute. 1 2 3 4 5 6 ュリヴヱハ 2. When [Protect] is selected 1 Press 3421 to select the image, and then press • The setting is canceled when 1 2 3 4 5 6 or 6HW &DQFHO 599 or is pressed again. to set (repeat).
14. Menu Guide – [Playback] Menu [Playback] menu ([Playback Mode]) : Default settings [Playback Mode] [Normal Play]/[Picture Only]/[Video Only]/[Rating]/[6K/4K PHOTO]/[Post-Focus] Filters the type of images to play back. • When you have set [Rating], put a check mark in the rating level you want to display, then press [DISP.]. [Slide Show] [All]/[Picture Only]/[Video Only]/[Rating]/[6K/4K PHOTO]/[Post-Focus] Selects image types and plays them back at regular intervals in order.
14. Menu Guide – [Playback] Menu [Rotate Disp.] [ON]/[OFF] Automatically displays pictures vertically if they were recorded when holding the camera vertically. [Picture Sort] [FILE NAME]/[DATE/TIME] This sets the order in which the camera displays images during playback. [FILE NAME]: Displays images by folder name/file name. [DATE/TIME]: Displays images by recording date. • If you insert another card, it may take some time to read all data, therefore pictures may not be displayed in the set order.
14. Menu Guide – [Playback] Menu [HLG View Assist (Monitor)] [MODE1]/[MODE2]/[OFF] At recording or playback of HLG video, this converts their color gamut and brightness for display. • This functions in tandem with [Monitor] in [HLG View Assist] in the [Custom] ([Monitor / Display (Video)]) menu. ([HLG View Assist]: 405) [Anamorphic Desqueeze Display] [ ]/[ ]/[ ]/[ ]/[ ]/[OFF] This displays the de-squeezed images suited to the magnification of the anamorphic lens on this camera.
14. Menu Guide – [Playback] Menu [Playback] menu ([Process Image]) : Default settings [RAW Processing] Processes pictures taken in RAW format on the camera and saves them in JPEG format. ([RAW Processing]: 461) [6K/4K PHOTO Bulk Saving] You can save any 5 second period of pictures from a 6K/4K burst file all at once. ([6K/4K PHOTO Bulk Saving]: 207) [6K/4K PHOTO Noise Reduction] [AUTO]/[OFF] When saving pictures, reduce the noise that occurs due to high ISO sensitivity.
14. Menu Guide – [Playback] Menu [Time Lapse Video] This creates videos from group images recorded with [Time Lapse Shot]. (Time Lapse Shot/Stop Motion Animation Videos: 226) 1 Press 21 to select a [Time Lapse Shot] group and then press 2 Select the options for creating a video to combine the pictures into a video. or . • When [System Frequency] is set to [24.00Hz (CINEMA)], [Time Lapse Video] is not available.
14. Menu Guide – [Playback] Menu [Playback] menu ([Add/Delete Info.]) [Protect] [Single]/[Multi]/[Cancel] You can set protection for images so that they will not be deleted by mistake. However, if you format the card, the protected images will also be deleted. • For information about how to select images (How to Select an Image(s) in the [Playback] menu: 598) • Be careful because the [Protect] setting may be disabled on a device other than this camera.
14. Menu Guide – [Playback] Menu [Playback] menu ([Edit Image]) : Default settings [Resize] [Single]/[Multi] Reduce the picture size of JPEG images and save them as different images to enable them to be easily used for web pages or sent as email attachments. • For information about how to select images (How to Select an Image(s) in the [Playback] menu: 598) – When [Single] is selected, after choosing the image, press 34 to select the size, then press or .
14. Menu Guide – [Playback] Menu [Rotate] Rotate images manually in 90o steps. [ ]: Rotates 90o clockwise. [ ]: Rotates 90o counter-clockwise. [Video Divide] Divide a recorded video or 6K/4K burst file into two.
14. Menu Guide – [Playback] Menu [Copy] [ [Copy Direction] ]/[ ] [Select Copy]/[Copy All in Folder]/[Copy All in Card] You can copy the images in one of the cards to the other card. • Copied images will be saved in a new folder. [Select Copy]: Copies selected images. 1 Select the folder containing the images to copy. 2 Select the images. (How to Select an Image(s) in the [Playback] menu: 598) [Copy All in Folder]: Copies all images in a folder. 1 Select the folder to copy.
14. Menu Guide – [Playback] Menu [Playback] menu ([Others]) : Default settings [Delete Confirmation] ["Yes" first]/["No" first] This sets which option, [Yes] or [No], will be highlighted first when the confirmation screen for deleting an image is displayed. ["Yes" first]: [Yes] is highlighted first. ["No" first]: [No] is highlighted first. [Delete All Images] [Card Slot 1]/[Card Slot 2] Deletes all images in a card. • Images cannot be restored once they have been deleted.
14. Menu Guide – Entering Characters Entering Characters Follow the steps below when the character entry screen is displayed. 1 Enter characters. ≥Press 3421 to select characters and then press until the character to enter is displayed. (Repeat this) • To repeatedly enter the same character, rotate or or to the right to move the entry position cursor.
15. Wi-Fi/Bluetooth ≥ Connecting to a Smartphone: 613 ≥ Operating the Camera with a Smartphone: 630 ≥ Sending Images from the Camera: 648 ≥ Wi-Fi Connections: 662 ≥ Send Settings and Selecting Images: 672 ≥ [Wi-Fi Setup] Menu: 675 This chapter explains the Wi-Fi® and Bluetooth® functions of the camera. Remote Operations from a Smartphone You can use the “LUMIX Sync” smartphone app for remote recording and image transfers.
15. Wi-Fi/Bluetooth Checking operation of the Wi-Fi and Bluetooth functions NETWORK connection lamp Light (blue) Lit Blinking Monitor Operation The Wi-Fi function is set to on, or there is a connection. The Bluetooth function is set to on, or there is a connection. When image data is sent using a camera operation. • Do not remove the card or battery or move to an area without any reception while sending images. • The camera cannot be used to connect to a public wireless LAN connection.
15. Wi-Fi/Bluetooth – Connecting to a Smartphone Connecting to a Smartphone ≥ Flow of connecting a smartphone: 613 ≥ Installing “LUMIX Sync”: 615 ≥ Connecting to a Smartphone (Bluetooth Connection): 616 ≥ Connecting to a Smartphone ([Wi-Fi connection]): 623 Connect with a smartphone which has the “Panasonic LUMIX Sync” (below: “LUMIX Sync”) smartphone app installed. Use “LUMIX Sync” for remote recording and image transfers. Flow of connecting a smartphone 1 2 Install “LUMIX Sync ” on your smartphone.
15. Wi-Fi/Bluetooth – Connecting to a Smartphone 3 Operate the camera using the smartphone. (Operating the Camera with a Smartphone: 630) ≥[Remote shooting]: 632 ≥[Shutter Remote Control]: 635 ≥[Import images]: 638 ≥[Auto Transfer]: 640 ≥[Location Logging]: 643 ≥[Remote Wakeup]: 645 ≥[Auto Clock Set]: 646 ≥[Camera settings copy]: 647 • You can also use the camera to transfer images to a smartphone.
15. Wi-Fi/Bluetooth – Connecting to a Smartphone Installing “LUMIX Sync” “LUMIX Sync” is an application for smartphones provided by Panasonic. Supported OS Android™: Android 7 or higher iOS: iOS 12 or higher 1 2 3 4 Connect the smartphone to a network. (Android) Select “Google Play™ Store”. (iOS) Select “App Store”. Enter “LUMIX” or “panasonic lumix sync” into the search box. Select and install the “Panasonic LUMIX Sync ” . • Use the latest version.
15. Wi-Fi/Bluetooth – Connecting to a Smartphone Connecting to a Smartphone (Bluetooth Connection) Follow a simple connection setup procedure (pairing) to connect to a smartphone that supports Bluetooth Low Energy. When pairing is set up, the Wi-Fi connection will be established automatically by just operating “LUMIX Sync”. • For the first-time connection, pairing settings are required.
15. Wi-Fi/Bluetooth – Connecting to a Smartphone 1 On the smartphone, start up “LUMIX Sync ”. ≥A message regarding device (camera) registration is displayed. Select [Next]. • If you have closed the message, select [ ], then register the camera using [Camera registration (pairing)]. 2 Check the content in the displayed guide and select [Next] until the screen to register the camera is displayed.
15. Wi-Fi/Bluetooth – Connecting to a Smartphone Operating the camera in accordance with the smartphone guide. 3 Set the camera to Bluetooth pairing standby state. [ ][ ] [Bluetooth] [Bluetooth] [SET] [Pairing] ≥The camera enters pairing standby state and the device name (A) is displayed. ≥ (A) 4 On the smartphone, select the camera’s device name. • (iOS devices) When a message to confirm the change of destination is displayed, select [Join].
15. Wi-Fi/Bluetooth – Connecting to a Smartphone 5 When a message indicating that device registration is complete, select [OK]. ≥A Bluetooth connection between the camera and the smartphone will be made. • The paired smartphone is registered as a paired device. • During Bluetooth connection, [ ] is displayed in the recording screen. When the Bluetooth function is enabled, but a connection is not established with the smartphone, [ ] appears translucent. • Up to 16 smartphones can be registered.
15. Wi-Fi/Bluetooth – Connecting to a Smartphone Wi-Fi connection with a Bluetooth connected smartphone You can establish Wi-Fi connection by operating “LUMIX Sync”. 1 Select [ ] ([Remote shooting]) or [ ] ([Import images]) in the “LUMIX Sync” home screen. End Bluetooth Connection To terminate the Bluetooth connection, turn off the Bluetooth function of the camera.
15. Wi-Fi/Bluetooth – Connecting to a Smartphone Connecting to a Paired Smartphone Connect paired smartphones using the following procedure. 1 Enable the Bluetooth function of the camera. 2 On the smartphone, start up “LUMIX Sync”. • [ ][ ] [Bluetooth] [Bluetooth] [ON] • If a message is displayed indicating that the smartphone is searching for cameras, close the message. 3 Select [ ]. 4 Select [Bluetooth Setup]. 5 Turn Bluetooth ON.
15. Wi-Fi/Bluetooth – Connecting to a Smartphone Canceling Pairing 1 Cancel the pairing setting of the camera. 2 Select the smartphone for which to cancel the pairing. • [ ][ ] [Bluetooth] [Bluetooth] [SET] [Delete] • Also cancel the pairing setting on the smartphone. • When [Reset] in the [Setup] ([Setting]) menu is used to reset the network settings, the information for registered devices is deleted.
15. Wi-Fi/Bluetooth – Connecting to a Smartphone Connecting to a Smartphone ([Wi-Fi connection]) Use Wi-Fi to connect the camera and a smartphone. With default settings, simple connection with smartphones is possible without entering a password. You can also use password authentication for enhanced connection security. 1 Set the camera to Wi-Fi connection standby status.
15. Wi-Fi/Bluetooth – Connecting to a Smartphone 2 3 4 5 In the setting menu of the smartphone, turn the Wi-Fi function ON. Select the SSID displayed on the camera. On the smartphone, start up “LUMIX Sync ”. (At the first connection) Confirm the device name displayed on the camera and then select [Yes].
15. Wi-Fi/Bluetooth – Connecting to a Smartphone • When a device different than the one you want to connect to is displayed, the camera will automatically connect to that device if you select [Yes]. If there are other Wi-Fi connection devices nearby, we recommend using either QR code or manual password input to connect with password authentication.
15. Wi-Fi/Bluetooth – Connecting to a Smartphone 3 On the smartphone, start up “LUMIX Sync”. • If a message is displayed indicating that the smartphone is searching for cameras, close the message. 4 Select [ 5 Select [Wi-Fi connection]. ]. 6 Select [QR code]. 7 Scan the QR code displayed on the screen of the camera using “LUMIX Sync”. • (iOS devices) When a message to confirm the change of destination is displayed, select [Join].
15. Wi-Fi/Bluetooth – Connecting to a Smartphone Manually entering a password to connect 1 Display the screen in Step 2 (Scanning QR code to connect: 625). 2 In the setting menu of the smartphone, turn the Wi-Fi function ON. 3 On the Wi-Fi setup screen, select the SSID (B) displayed on the camera. 4 (At the first connection) Enter the password (B) displayed on the camera. 5 On the smartphone, start up “LUMIX Sync”.
15. Wi-Fi/Bluetooth – Connecting to a Smartphone Connection Methods Other Than the Default Settings When connecting with [Via Network], or [WPS Connection] in [Direct], follow the steps below: 1 Display the connection method setting screen for the camera. • [ ][ ] [Wi-Fi] [Wi-Fi Function] [New Connection] [Control With Smartphone] 2 Press [DISP.]. Connecting via network 1 Select [Via Network] and then press or . • Connect the camera to a wireless access point.
15. Wi-Fi/Bluetooth – Connecting to a Smartphone Terminating the Wi-Fi Connection To end the Wi-Fi connection between the camera and smartphone, follow the steps below. 1 2 Press the shutter button halfway to put the camera in recording mode. Terminate the Wi-Fi connection. ≥ [ ][ ] [Wi-Fi] [Wi-Fi Function] [Yes] • You can also perform the same operation by pressing the Fn button assigned with [Wi-Fi]. (Fn Button Assigned with [Wi-Fi]: 651) 3 On the smartphone, close the “ LUMIX Sync”.
15. Wi-Fi/Bluetooth – Operating the Camera with a Smartphone Operating the Camera with a Smartphone ≥ [Remote shooting]: 632 ≥ [Shutter Remote Control]: 635 ≥ [Import images]: 638 ≥ [Auto Transfer]: 640 ≥ [Location Logging]: 643 ≥ [Remote Wakeup]: 645 ≥ [Auto Clock Set]: 646 ≥ [Camera settings copy]: 647 This explains the functions for operating the camera from a smartphone.
15. Wi-Fi/Bluetooth – Operating the Camera with a Smartphone Home Screen When you start up “LUMIX Sync”, the home screen is displayed. (A) (B) (C) (D) (E) (A) : App settings This allows connection settings, camera ON/OFF operations, and displays Help. (B) (C) (D) (E) : [Import images] ([Import images]: 638) : [Remote shooting] ([Remote shooting]: 632) : [Shutter Remote Control] ([Shutter Remote Control]: 635) : [Others] (Camera settings copy/live streaming) ([Camera settings copy]: 647, 16.
15. Wi-Fi/Bluetooth – Operating the Camera with a Smartphone [Remote shooting] You can use the smartphone to record from a remote location while viewing the live view images from the camera. Getting started: • Connect the camera to a smartphone. (Connecting to a Smartphone: 613) • On the smartphone, start up “LUMIX Sync”. 1 Select [ ] ([Remote shooting]) in the home screen. • (iOS devices) When a message to confirm the change of destination is displayed, select [Join].
15. Wi-Fi/Bluetooth – Operating the Camera with a Smartphone 2 Start recording. (A) (B) (A) Takes a picture (B) Starts/ends the video recording • The recorded image is saved on the camera. • Certain features, including some settings, may not be available.
15. Wi-Fi/Bluetooth – Operating the Camera with a Smartphone Operation Method During Remote Recording Set either the camera or the smartphone as the priority control device to be used during remote recording. [ ][ Remote Device] ] [Wi-Fi] [Wi-Fi Setup] Select [Priority of Operation is possible on both the camera and the [Camera] smartphone. • The camera’s dial settings, etc. cannot be changed with the smartphone. Operation is possible only on the smartphone.
15. Wi-Fi/Bluetooth – Operating the Camera with a Smartphone [Shutter Remote Control] Bluetooth You can use the smartphone as a remote control for the shutter. Getting started: • Connect the camera to a smartphone. (Connecting to a Smartphone: 613) • On the smartphone, start up “LUMIX Sync”. 1 2 Select [ screen. ] ([Shutter Remote Control]) in the home Start recording.
15. Wi-Fi/Bluetooth – Operating the Camera with a Smartphone Bulb Recording The shutter can be kept open from the start to end of recording, which is useful for recording of starry skies or night scenery. Getting started: • Set the camera to [M] mode. (Manual Exposure Mode: 264) • Set the camera shutter speed to [B] (Bulb). ([B] (Bulb): 267) 1 Touch [ 2 Remove your finger from [ • Slide [ ] to start recording (keep touching, without removing your finger). ] to end recording.
15. Wi-Fi/Bluetooth – Operating the Camera with a Smartphone Shortening the Return Time from [Sleep Mode] You can shorten the time it takes for the camera to return from [Sleep Mode] when the [Shutter Remote Control] is used. Getting started: • Connect the camera to a smartphone by Bluetooth. (Connecting to a Smartphone (Bluetooth Connection): 616) • Set [Remote Wakeup] in [Bluetooth] to [ON].
15. Wi-Fi/Bluetooth – Operating the Camera with a Smartphone [Import images] Transfer an image stored on the card to the smartphone. Getting started: • Connect the camera to a smartphone. (Connecting to a Smartphone: 613) • On the smartphone, start up “LUMIX Sync”. 1 2 Select [ ] ([Import images]) in the home screen. • (iOS devices) When a message to confirm the change of destination is displayed, select [Join]. Select the image to transfer. • You can switch the card displayed by touching (A).
15. Wi-Fi/Bluetooth – Operating the Camera with a Smartphone 3 Transfer the image. ≥Select [ ]. • If the image is a video, you can play it back by touching [ ] at the center of the screen. • When a video is played back, this has a small data size and is transmitted using “LUMIX Sync”, therefore its image quality will differ from that of the actual video recording.
15. Wi-Fi/Bluetooth – Operating the Camera with a Smartphone [Auto Transfer] Bluetooth You can automatically transfer recorded pictures to a smartphone as they are taken. Getting started: • Connect the camera to a smartphone by Bluetooth. (Connecting to a Smartphone (Bluetooth Connection): 616) 1 Enable [Auto Transfer] on the camera.
15. Wi-Fi/Bluetooth – Operating the Camera with a Smartphone 3 Check the send settings on the camera and then press or . • To change the send setting, press [DISP.]. (Image Send Settings: 672) • Automatic image transfer is possible when [ ] is displayed on the camera recording screen. 4 Record with the camera. •[ ] is displayed in the recording screen of the camera while a file is being sent.
15. Wi-Fi/Bluetooth – Operating the Camera with a Smartphone • If the [Bluetooth] and [Auto Transfer] settings of the camera are [ON], the camera automatically connects to the smartphone via Bluetooth and Wi-Fi when you turn on the camera. Start up the “LUMIX Sync” on the smartphone to connect to the camera. • When [Auto Transfer] is set to [ON], [Wi-Fi Function] cannot be used.
15. Wi-Fi/Bluetooth – Operating the Camera with a Smartphone [Location Logging] Bluetooth The smartphone sends its location information to the camera via Bluetooth, and the camera performs recording while writing the acquired location information. Getting started: • Enable the GPS function on the smartphone. • Connect the camera to a smartphone by Bluetooth. (Connecting to a Smartphone (Bluetooth Connection): 616) 1 Enable [Location Logging] on the camera.
15. Wi-Fi/Bluetooth – Operating the Camera with a Smartphone • When [ GPS ] on the recording screen appears translucent, location information cannot be acquired, therefore data cannot be written. Smartphone GPS positioning may not be possible if the smartphone is within a building, a bag, or similar. Move the smartphone to a position affording a wide view of the sky to improve positioning performance. In addition, refer to the operating instructions of your smartphone.
15. Wi-Fi/Bluetooth – Operating the Camera with a Smartphone [Remote Wakeup] Bluetooth Even when the camera is turned off, the smartphone can be used to start the camera and record images, or check the recorded images. Getting started: 1 Connect to a smartphone using Bluetooth. (Connecting to a Smartphone (Bluetooth Connection): 616) 2 Enable [Remote Wakeup] on the camera. 3 Set the camera on/off switch to [OFF]. 4 On the smartphone, start up “LUMIX Sync”.
15. Wi-Fi/Bluetooth – Operating the Camera with a Smartphone [Auto Clock Set] Bluetooth Synchronize the clock and the time zone setting of the camera with those of a smartphone. Getting started: • Connect the camera to a smartphone by Bluetooth. (Connecting to a Smartphone (Bluetooth Connection): 616) 1 Enable [Auto Clock Set] on the camera.
15. Wi-Fi/Bluetooth – Operating the Camera with a Smartphone [Camera settings copy] Bluetooth This saves the camera’s settings information to the smartphone. Saved settings information can be loaded to the camera, letting you set the same settings on multiple cameras. Getting started: • Connect the camera to a smartphone by Bluetooth. (Connecting to a Smartphone (Bluetooth Connection): 616) 1 2 Select [ ] ([Others]) [ ] ([Camera settings copy]) in the “ LUMIX Sync” home screen.
15. Wi-Fi/Bluetooth – Sending Images from the Camera Sending Images from the Camera ≥ [Smartphone]: 652 ≥ [PC]: 656 ≥ [Printer]: 660 Operate the camera to send recorded images to a device connected by Wi-Fi. Operation flow 1 2 3 4 Select the sending method. Select the sending method from the [Send Images While Recording] and [Send Images Stored in the Camera] camera menus. Select the destination (type of the destination device).
15. Wi-Fi/Bluetooth – Sending Images from the Camera 5 ([Send Images While Recording]) Take pictures. This automatically sends the recorded pictures as they are taken. ([Send Images Stored in the Camera]) Select an image. Send the selected images. • Selecting images (Selecting Images: 674) Refer to the following pages for the steps common to all devices.
15. Wi-Fi/Bluetooth – Sending Images from the Camera Images That Can be Sent Images that can be sent differ depending on the destination device.
15. Wi-Fi/Bluetooth – Sending Images from the Camera Fn Button Assigned with [Wi-Fi] You can perform the following operations by pressing the Fn button assigned with [Wi-Fi] after connecting to Wi-Fi. (Fn Buttons: 472) [Terminate the Connection] [Change the Destination] [Change Settings for Sending Images] [Register the Current Destination to Favorite] [Network Address] Terminates the Wi-Fi connection. Terminates the Wi-Fi connection, and allows you to select a different Wi-Fi connection.
15. Wi-Fi/Bluetooth – Sending Images from the Camera [Smartphone] Transfer recorded images to a smartphone connected using Wi-Fi. Getting started: • Install “LUMIX Sync” on your smartphone. (Installing “LUMIX Sync”: 615) 1 Select the method for sending the images on the camera. ≥ 2 [ ][ ] [Wi-Fi] [Wi-Fi Function] [New Connection] [Send Images While Recording]/[Send Images Stored in the Camera] Set the destination to [Smartphone].
15. Wi-Fi/Bluetooth – Sending Images from the Camera 3 4 5 6 7 Connect the camera to a smartphone by Wi-Fi. ≥Select [Via Network] ([Via Network]: 663) or [Direct] ([Direct]: 667), and then connect. On the smartphone, start up “LUMIX Sync ”. Select the destination smartphone on the camera. Check the send settings and then press or . • To change the send settings of images, press [DISP.]. (Image Send Settings: 672) (When [Send Images While Recording] is selected) Take pictures.
15. Wi-Fi/Bluetooth – Sending Images from the Camera Sending Images on the Camera to a Smartphone with Simple Operations You can transfer pictures to a smartphone connected by Bluetooth just by pressing the [Q] button during playback. You can also use the menu to connect easily. • You can also perform the same operation by pressing the Fn button registered with [Send Image (Smartphone)]. (Fn Buttons: 472) Getting started: • Install “LUMIX Sync” on your smartphone.
15. Wi-Fi/Bluetooth – Sending Images from the Camera Send multiple images 1 Press [Q]. 2 Select [Multi Select]. • To change the send settings of images, press [DISP.]. (Image Send Settings: 672) 3 Select the images and then transfer. 21: Select images or : Set/Cancel [DISP.]: Transfer 4 On the smartphone, select [Yes] (for Android devices) or [Join] (for iOS devices). • This connects automatically using Wi-Fi.
15. Wi-Fi/Bluetooth – Sending Images from the Camera [PC] Send recorded images to the PC connected with Wi-Fi. Supported OS Windows: Windows 10 Mac: macOS 10.13, 10.14, 10.15.3 to 10.15.7, 11.0 to 11.2 Getting started: • Turn on the PC. • Create a destination folder for images. • If the workgroup of the destination PC has been changed from the standard setting, change the corresponding setting of the camera in [PC Connection].
15. Wi-Fi/Bluetooth – Sending Images from the Camera • Create a PC account name (up to 254 characters) and password (up to 32 characters) consisting of alphanumeric characters. A destination folder may not be created if the account name includes non-alphanumeric characters. • When the computer name (NetBIOS name for Mac) contains a space (blank character), etc., it may not be recognized. In that case, we recommend changing the name to one consisting only of 15 or less alphanumeric characters.
15. Wi-Fi/Bluetooth – Sending Images from the Camera 3 4 Connect the camera and PC by Wi-Fi. ≥Select [Via Network] ([Via Network]: 663) or [Direct] ([Direct]: 667), and then connect. Enter the computer name of the PC name you want to connect to (for Mac, the NetBIOS name). • How to enter characters (Entering Characters: 610) 5 Select a folder for storing images. • Folders sorted by sent date will be created in the selected folder, and images will be saved there.
15. Wi-Fi/Bluetooth – Sending Images from the Camera 6 7 Check the send settings and then press or . • To change the send setting, press [DISP.]. (Image Send Settings: 672) (When [Send Images While Recording] is selected) Take pictures. •[ ] is displayed in the recording screen of the camera while a file is being sent. • To end the connection, follow the steps below: [ ][ ] [Wi-Fi] [Wi-Fi Function] [Yes] (When [Send Images Stored in the Camera] is selected) Select an image.
15. Wi-Fi/Bluetooth – Sending Images from the Camera [Printer] You can send images to a PictBridge (wireless LAN)*1-supported printer connected by Wi-Fi for printing. *1 DPS over IP standard-compliant 1 Select the method for sending images on the camera. 2 Set the destination to [Printer].
15. Wi-Fi/Bluetooth – Sending Images from the Camera 3 4 5 Connect the camera to a printer by Wi-Fi. ≥Select [Via Network] ([Via Network]: 663) or [Direct] ([Direct]: 667), and then connect. Select the destination printer. Select and print images. • The procedure for selecting images is the same as the one for when the USB connection cable is connected. (Printing: 703) • To terminate the connection, press [ ].
15. Wi-Fi/Bluetooth – Wi-Fi Connections Wi-Fi Connections ≥ [Via Network]: 663 ≥ [Direct]: 667 ≥ Connect to Wi-Fi Using Previously Saved Settings: 669 When [New Connection] has been selected in [Wi-Fi Function] in [Wi-Fi] of the [Setup] ([IN/OUT]) menu, select the connection method from either [Via Network] or [Direct] to connect.
15. Wi-Fi/Bluetooth – Wi-Fi Connections [Via Network] Connect the camera and an external device through the wireless access point. 1 Select the method for connecting to a wireless access point. Settings: [WPS (Push-Button)]/[WPS (PIN code)]/[From List] • After selecting [Via Network] once, the camera will connect to the previously-used wireless access point. To change the wireless access point used for connection, press [DISP.] and change the connection destination.
15. Wi-Fi/Bluetooth – Wi-Fi Connections [WPS (Push-Button)] Press the WPS button on the wireless access point to set up a connection. 1 Press the wireless access point WPS button until it switches to WPS mode. Example) [WPS (PIN code)] Enter a PIN code into the wireless access point to set up a connection. 1 On the camera screen, select the wireless access point you are connecting to. 2 Enter the PIN code displayed on the camera screen into the wireless access point. 3 Press or of the camera.
15. Wi-Fi/Bluetooth – Wi-Fi Connections [From List] Searches for a wireless access point to use, and connects to it. • Confirm the encryption key of the wireless access point. 1 Select the wireless access point you are connecting to. • Press [DISP.] to run a wireless access point search again. • If no wireless access point is found (Connecting by Manual Input: 666) 2 (If network authentication is encrypted) Enter the encryption key.
15. Wi-Fi/Bluetooth – Wi-Fi Connections Connecting by Manual Input • Check the SSID, network authentication, encryption, and encryption key of the wireless access point you are using. 1 In the screen in Step 1 of “[From List]”, select [Manual Input]. 2 Enter the SSID of the wireless access point you are connecting to, and then select [Set]. • How to enter characters (Entering Characters: 610) 3 Select the network authentication.
15. Wi-Fi/Bluetooth – Wi-Fi Connections [Direct] Directly connect the camera and the external device. 1 Select the method for connecting with the destination device. [WPS Connection] [WPS (Push-Button)]: Press the WPS button on the external device to connect. • On the camera, press [DISP.] to extend the connection wait time. [WPS (PIN code)]: Enter the PIN code into the camera, and connect.
15. Wi-Fi/Bluetooth – Wi-Fi Connections [Manual Connection] Search for the camera on the destination device to connect. Enter the SSID and password displayed on the camera into the device. • If the destination is set to [Smartphone], the password is not displayed. Select the SSID to establish a connection. (Connecting to a Smartphone ([Wi-Fi connection]): 623) • Please also refer to the operating instructions for the device to be connected.
15. Wi-Fi/Bluetooth – Wi-Fi Connections Connect to Wi-Fi Using Previously Saved Settings Use the Wi-Fi connection history to connect using the same settings as previously. 1 Display the Wi-Fi connection history. 2 Select the History item to connect to. ≥ [ ][ ] [Wi-Fi] [Wi-Fi Function] [Select a destination from History]/[Select a destination from Favorite] • Press [DISP.] to confirm details of the connection history.
15. Wi-Fi/Bluetooth – Wi-Fi Connections Register to Favorite You can register the Wi-Fi connection history to Favorite. 1 Display the Wi-Fi connection history. • [ ][ ] [Wi-Fi] [Wi-Fi Function] [Select a destination from History] 2 Select the History item to register and then press 1. 3 Enter a registration name and then select [Set]. • How to enter characters (Entering Characters: 610) • A maximum of 30 characters can be entered. A two-byte character is treated as two characters.
15. Wi-Fi/Bluetooth – Wi-Fi Connections • The number of items that can be saved in History is limited. Register frequently-used connection settings to Favorite. • When [Reset] in the [Setup] ([Setting]) menu is used to reset the network settings, the content registered in History and Favorite is deleted. • If the device you want to connect to (smartphone, etc.) is connected to a wireless access point other than the camera, you cannot connect the device to the camera using [Direct].
15. Wi-Fi/Bluetooth – Send Settings and Selecting Images Send Settings and Selecting Images ≥ Image Send Settings: 672 ≥ Selecting Images: 674 Image Send Settings Set the size, file format, and other items for sending the image to the destination device. 1 2 After Wi-Fi connection, the send settings confirmation screen will be displayed, so press [DISP.]. Change the send settings.
15. Wi-Fi/Bluetooth – Send Settings and Selecting Images [Size] Resize the image to send. [Original]/[Change] ([M], [S], or [VGA]) [File Format] Sets the file format of images to send. [JPG]/[RAWiJPG]/[RAW] • This setting is possible when the destination supports the sending of RAW images from this camera.
15. Wi-Fi/Bluetooth – Send Settings and Selecting Images Selecting Images When sending by [Send Images Stored in the Camera], select the images using the following procedure. 1 2 Select [Single Select] or [Multi Select]. Select the image. [Single Select] setting 1 Press 21 to select an image. 6HW 2 Press or . [Multi Select] setting 1 Press 3421 to select an image and then press or . (Repeat this) • To cancel the setting, press or again. • Images are displayed separately by card slot.
15. Wi-Fi/Bluetooth – [Wi-Fi Setup] Menu [Wi-Fi Setup] Menu This configures the settings required for the Wi-Fi function. The settings cannot be changed when connected to Wi-Fi. 1 Displaying the [Wi-Fi Setup] menu. ≥ [ ][ ] [Wi-Fi] [Wi-Fi Setup] [Priority of Remote Device] This sets either the camera or the smartphone as the priority control device to be used during remote recording.
15. Wi-Fi/Bluetooth – [Wi-Fi Setup] Menu [Device Name] You can change the name (SSID) of the camera. • To change the SSID name, press [DISP.] and enter the new SSID name. How to enter characters (Entering Characters: 610) • A maximum of 32 characters can be entered. [Wi-Fi Function Lock] To prevent incorrect operation and use of the Wi-Fi function by a third party and to protect personal information in the camera and included with images, protect the Wi-Fi function with a password.
16. Streaming Function ≥ Stream by Operating a Smartphone: 678 ≥ Stream by Operating the Camera: 680 ≥ Streaming Settings: 683 Live stream the camera’s images and audio over the internet. • To start streaming, there is a smartphone operation method and camera operation method. • This camera supports RTMP/RTMPS*1. You can stream to video sharing websites that support RTMP or RTMPS.
16. Streaming Function – Stream by Operating a Smartphone Stream by Operating a Smartphone Operate the smartphone app “LUMIX Sync” to start streaming. Bluetooth Getting started: • Install “LUMIX Sync” on your smartphone. (Installing “LUMIX Sync”: 615) • Connect the camera to a smartphone by Bluetooth. (Connecting to a Smartphone (Bluetooth Connection): 616) (Camera operation) 1 Set the mode dial to [ ]. (Smartphone operation) 2 Set streaming with “LUMIX Sync”. 1 Start up “LUMIX Sync”.
16. Streaming Function – Stream by Operating a Smartphone 4 Set streaming details. [Wi-Fi Connection Setting]: Sets the wireless access point the camera connects to when streaming. [Streaming Quality]: Sets the image quality that will be streamed. [Privacy settings]: Selects privacy setting. 5 Select [Set to the camera]. • If the message [Unable to confirm security of the streaming address.
16. Streaming Function – Stream by Operating the Camera Stream by Operating the Camera Sets the streaming destination on a PC and saves it to a card. Insert the card to the camera and start streaming by operating the camera. SD Getting started: • Install “LUMIX Network Setting Software” to the PC. https://panasonic.jp/support/global/cs/dsc/download/index3.html (English only) Supported OS Windows: Windows 10 Mac: macOS 10.13, 10.14, 10.15.3 to 10.15.7, 11.0 to 11.2 • Insert a card into the PC.
16. Streaming Function – Stream by Operating the Camera 3 Input the streaming destination (URL, stream key) to “LUMIX Network Setting Software” and select [Next]. 4 Set the output destination (card) and file name, and select [Save]. • Characters that can be set in [File Name]: Alphabet (uppercase), numbers, up to 8 characters. • To prevent usage from a third party, you can secure the streaming destination with a password. – Put a check mark in [Password].
16. Streaming Function – Stream by Operating the Camera 4 Start streaming. 5 Stop streaming. 6 ≥Press the shutter button or video rec. button. ≥[ ] is displayed on the recording screen. ≥Operations to start streaming may be needed on the video sharing website. ≥Press the shutter button or video rec. button. End the streaming function.
16. Streaming Function – Streaming Settings Streaming Settings ≥ Notes When Using the Streaming Function: 687 Configures streaming settings. [ ][ [Streaming Function] [Streaming Quality] ] [Wi-Fi] Select [Streaming Setup] [ON]: Performs Wi-Fi connection and gets into a state where streaming can start. [OFF]: Ends the Wi-Fi connection for performing streaming. Sets the image quality that will be streamed. ([Streaming Quality]: 686) Displays the current streaming destination address.
16. Streaming Function – Streaming Settings Saves the current streaming destination address to the card. • If saving new data, then select [New File], and if overwriting an existing file, select that existing file. • When [New File] is selected, a screen to select the file name to save as is displayed. [Save] [OK]: Saves using the file name on the screen. [Change the file name]: Changes the file name and saves the file.
16. Streaming Function – Streaming Settings [Wi-Fi Connection Setting] Sets the wireless access point the camera connects to when streaming. ([Via Network]: 663) • Up to 10 streaming destination addresses can be saved onto one card. • Set [Wi-Fi Connection Setting] before setting [Streaming Function] to [ON]. • If you forget the password, save the streaming destination address again with a new password.
16. Streaming Function – Streaming Settings [Streaming Quality] Video compression format: H.264/MPEG-4 AVC [System Frequency]: [59.94Hz (NTSC)] [Streaming Quality] Resolution Frame rate Bit rate 59.94p 16 Mbps 59.94p 8 Mbps 29.97p 6 Mbps FHD/3M/30p 29.97p 3 Mbps HD/6M/60p 59.94p 6 Mbps 29.97p 4 Mbps FHD/16M/60p FHD/8M/60p FHD/6M/30p HD/4M/30p 1920k1080 1280k720 [System Frequency]: [50.00Hz (PAL)] [Streaming Quality] Resolution Frame rate Bit rate 50.00p 16 Mbps 50.
16. Streaming Function – Streaming Settings Notes When Using the Streaming Function Operation is as follows when using the streaming function: • The following functions are not available: – [Hybrid Log Gamma] ([Photo Style]) – [Miniature Effect] ([Filter Settings]) – [Rec.
16. Streaming Function – Streaming Settings • Displays a blue frame on the screen during streaming: [ ][ ] [Streaming Blue Frame Indicator] ([Streaming Blue Frame Indicator]: 579) • When you press the video rec.
17. Connecting to Other Devices ≥ Viewing on a TV: 691 ≥ Importing Images to a PC: 695 ≥ Storing on a Recorder: 699 ≥ Tethered Recording: 700 ≥ Printing: 703 This chapter describes connections with other devices, such as TVs and PCs. Connect using either the [HDMI] socket or the USB port on the camera. Refer to the sections below for more details about connections. • Check the direction of the terminals and plug in/out straight holding onto the plug.
17. Connecting to Other Devices USB port Use a USB connection cable to connect the camera to a PC, recorder, or printer. • Do not use any other USB connection cables except the supplied one.
17. Connecting to Other Devices – Viewing on a TV Viewing on a TV You can connect the camera to an external monitor or TV to view recorded pictures and videos. Getting started: • Turn off the camera and TV. 1 2 3 4 5 Connect the camera and TV with a commercially available HDMI cable. ([HDMI] socket: 689) Turn on the TV. Switch the TV input to HDMI input. Turn on the camera. Display the playback screen. ≥Press [ ]. ≥The recorded images are displayed on the TV.
17. Connecting to Other Devices – Viewing on a TV • With the default settings, pictures are output at the optimal resolution for the connected TV. The output resolution can be changed in [Output Resolution(Playback)]. ([HDMI Connection]: 591) • Depending on the aspect ratio, gray bands may be displayed on the top and bottom or the left and right of images. You can change the band color in [Background Color(Playback)] in [HDMI Connection] of the [Setup] ([IN/OUT]) menu.
17. Connecting to Other Devices – Viewing on a TV Using VIERA Link VIERA Link (HDAVI Control™) is a function that allows you to use your remote control for the Panasonic TV for easy operations when the camera has been connected to a VIERA Link compatible device using an HDMI cable for automatic linked operations. (Not all operations are possible.) • To use VIERA Link, you need to also configure the settings on the TV. For the setting procedure, refer to the operating instructions for the TV.
17. Connecting to Other Devices – Viewing on a TV • VIERA Link is a unique Panasonic function built on an HDMI control function using the standard HDMI CEC (Consumer Electronics Control) specification. Linked operations with HDMI CEC compatible devices made by other companies are not guaranteed. • The camera supports “VIERA Link Ver.5”. “VIERA Link Ver.5” is the standard for Panasonic’s VIERA Link compatible devices. This standard is compatible with Panasonic’s conventional VIERA Link devices.
17. Connecting to Other Devices – Importing Images to a PC Importing Images to a PC ≥ Installing Software: 697 After connecting to the PC, you can copy the recorded images by dragging files and folders on this camera to the PC. • The camera can be connected to a PC running any of the following OSs which can detect mass storage devices. Supported OS Windows: Windows 10 Mac: macOS 10.13, 10.14, 10.15.3 to 10.15.7, 11.0 to 11.2 Getting started: • Turn on the camera and PC.
17. Connecting to Other Devices – Importing Images to a PC Folder Structure Inside Card LUMIX AD_LUMIX CAMSET (A) STREAM (B) DCIM 100XXXXX (C) (D) PXXX0001.
17. Connecting to Other Devices – Importing Images to a PC Installing Software Install the software to perform operations such as organizing and correcting recorded images, processing RAW images, and editing videos. • To download the software, your PC needs to be able to connect to the internet. • Supported OSs are current as of May 2021 and are subject to change. SILKYPIX Developer Studio SE This software processes and edits RAW images. Edited images can be saved in a format (JPEG, TIFF, etc.
17. Connecting to Other Devices – Importing Images to a PC 30-Day Full Trial Version of “LoiLoScope” This software allows you to easily edit videos. Check the following site and then download and install the software: http://loilo.tv/product/20 Operating environment ≥ Supported OS Windows: Windows 10, Windows 8.1, Windows 8 • You can download a trial version that can be used for free for 30 days.
17. Connecting to Other Devices – Storing on a Recorder Storing on a Recorder By connecting the camera to a Panasonic Blu-ray disc recorder or DVD recorder, you can store the pictures and videos. Getting started: • Turn on the camera and recorder. • Insert a card into card slot 1. 1 2 3 Connect the camera and recorder with the USB connection cable. (USB port: 690) Press 34 to select [PC(Storage)] and then press . or Operate the recorder to store the images.
17. Connecting to Other Devices – Tethered Recording Tethered Recording ≥ Installing Software: 701 ≥ Operating the Camera from a PC: 702 If you install the “LUMIX Tether” camera control software on your PC, you can connect the camera to the PC via USB and then control the camera from the PC and record while checking the live view on the PC screen (tethered recording). In addition, you can output via HDMI to an external monitor or TV during tethered recording.
17. Connecting to Other Devices – Tethered Recording Installing Software “LUMIX Tether” This software is for controlling the camera from a PC. It allows you to change various settings and to record remotely and then save the images to the PC. Check the following site and then download and install the software: https://panasonic.jp/support/global/cs/soft/download/d_lumixtether.html (English only) Operating environment ≥ Supported OS Windows: Windows 10 (64 bit) Mac: macOS 10.13, 10.14, 10.15.3 to 10.15.
17. Connecting to Other Devices – Tethered Recording Operating the Camera from a PC Getting started: • Turn on the camera and PC. • Install “LUMIX Tether” on PC. 1 2 3 Connect the camera and PC with the USB connection cable. (USB port: 690) Press 34 to select [PC(Tether)] and then press . ≥[ or ] is displayed on the camera’s screen. Use “LUMIX Tether” to operate the camera from the PC.
17. Connecting to Other Devices – Printing Printing If you connect the camera to a printer that supports PictBridge, you can select pictures on the camera’s monitor and then print them. Getting started: • Turn on the camera and printer. • Set the print quality and other settings on the printer. 1 Play back the card that contains the picture you want to print. ≥Press [ ]. ≥After pressing [ ], press 34 to select [Card Slot 1] or [Card Slot 2], and then press or .
17. Connecting to Other Devices – Printing 4 Press 21 to select a picture and then press or ≥To print multiple pictures, press 3, set the picture selection method, and then select pictures. PictBridge 0XOWL 3ULQW 3ULQW [Multi Select] Selects the picture to print. 1 Press 3421 to select a picture and then press • To cancel the setting, press 2 or again. Press [DISP.] to end selection. [Select All] Prints all the stored pictures. [Rating] Prints all pictures with [Rating] levels from [¿1] to [¿5].
17. Connecting to Other Devices – Printing 6 Start printing. ≥Select [Print start] and then press or . Setting Items (Print Settings) [Print start] Starts printing. Sets printing with date. [Print with Date] • If the printer does not support printing with date, the [Num.of prints] Sets the number of prints to be printed (up to 999). date cannot be printed. [Paper Size] [Page Layout] Sets the paper size. Sets whether to add borders and how many images to be printed on each sheet of paper.
17. Connecting to Other Devices – Printing • If [USB Mode] is set to [PictBridge(PTP)] in the [Setup] ([IN/OUT]) menu, the camera will be automatically connected to the printer without the [USB Mode] selection screen being displayed. ([USB]: 590) • Take care not to turn off the camera while printing is in progress. • When connecting with the printer is not possible, set [USB Power Supply] to [OFF] and then try connecting again.
18.
18. Materials – Digital Camera Accessory System Digital Camera Accessory System (Product numbers correct as of May 2021.
18. Materials – Digital Camera Accessory System • Some optional accessories may not be available in some countries. • For lens-related optional accessories such as compatible lenses and filters, refer to our catalogs/web pages, etc. • For the latest information on optional accessories, refer to our catalogs/web pages, etc.
18.
18. Materials – Using Optional Accessories Selecting Battery Usage Priority Selects which battery to use first when the batteries are installed in both the camera and the Battery Grip. Getting started: • Turn the camera off, and remove the cover for the battery grip connector. 1 Attach the Battery Grip to the camera. 2 Turn on the camera. 3 Set the battery use priority. • [ ][ ] [Battery Use Priority] [BODY] The battery in the camera is used first.
18. Materials – Using Optional Accessories Shutter Remote Control (Optional) You can connect the Shutter Remote Control (DMW-RS2: optional) to use the camera as follows: • Fully pressing the shutter button without camera shake • Securing the shutter button during bulb recording and burst recording • Start/end the video recording • Using the functions registered in the video rec. button of the Shutter Remote Control Registering Functions to the Video Rec.
18. Materials – Using Optional Accessories • Always use a genuine Panasonic Shutter Remote Control (DMW-RS2: optional). • Refer to the operating instructions for the Shutter Remote Control for details. Tripod Grip (Optional) Attach a Tripod Grip (DMW-SHGR1: optional) to use it as a grip for recording while walking, a tripod, or a Shutter Remote Control. • Connect the grip cable to the [REMOTE] socket on the camera. • Always use a genuine Panasonic Tripod Grip (DMW-SHGR1: optional). • The [Video Rec.
18. Materials – Using Optional Accessories AC Adaptor (Optional)/DC Coupler (Optional) With an AC Adaptor (DMW-AC10: optional) and DC Coupler (DMW-DCC17: optional), you can perform recording and playback without worrying about the remaining battery charge. • Be sure to purchase both an AC Adaptor and a DC Coupler as a set. They cannot be used independently of one another. • When the DC Coupler is being mounted, the DC Coupler cover opens, so the structure ceases to be dust and splash resistant.
18. Materials – Monitor/Viewfinder Displays Monitor/Viewfinder Displays ≥ Recording Screen: 715 ≥ Playback Screen: 729 • The screen is an monitor display example of when [LVF/Monitor Disp. Set] is set to [ ]. Recording Screen (1) (6) (2) (3) (4) TC 00:00:00.00 60 (5) F3.
18.
18.
18. Materials – Monitor/Viewfinder Displays (2) PRE Pre-Burst recording ([Pre-Burst Recording] ([6K/4K Burst]/ [6K/4K Burst(S/S)]): 196) Multiple exposures ([Multiple Exposure]: 532) Silent mode ([Silent Mode]: 240) Image area of video ([Image Area of Video]: 349) Anamorphic Desqueeze Display ([Anamorphic Desqueeze Display]: 408) Overlay indication ([Sheer Overlay]: 573) LUT View Assist ([V-LogL View Assist]: 399) Loop recording ([Loop Recording (video)]: 413) Streaming function is ON (16.
18. Materials – Monitor/Viewfinder Displays (4) Histogram ([Histogram]: 567) AF area Spot metering target ([Metering Mode]: 253) Center marker ([Center Marker]: 577) Self-timer (Recording Using the Self-timer: 228) Operation lock ([Operation Lock Setup]: 561) XXmXXs Elapsed recording time (Screen Displays While Video Recording: 327) (5) 2021.12. 1 10:00:00 Time stamp recording ([Time Stamp Rec.
18. Materials – Monitor/Viewfinder Displays Metering mode ([Metering Mode]: 253) AEL AE Lock (Locking Focus and Exposure (AF/AE Lock): 272) 60 Shutter speed F3.5 Aperture value BKT F3.
18.
18.
18. Materials – Monitor/Viewfinder Displays Control Panel (1) (2) (3) (4) (1) Recording mode (Selecting the Recording Mode: 80) 1/60 Shutter speed (Recording: 78) F3.
18. Materials – Monitor/Viewfinder Displays (3) Drive mode (Selecting the Drive Mode: 183) AFS Focus mode (Selecting the Focus Mode: 126, Record Using MF: 168) AF mode (Selecting the AF Mode: 136) FINE Picture quality ([Picture Quality]: 117) Image area of video ([Image Area of Video]: 349) Recording file format ([Rec.
18. Materials – Monitor/Viewfinder Displays (4) Photo Style ([Photo Style]: 286) AWB White balance (White Balance (WB): 279) i.Dynamic Range ([i.
18. Materials – Monitor/Viewfinder Displays Control Panel (Creative Video mode) (1) (2) (3) (4) (5) (1) FPS 60 SHUTTER 1/60 IRIS F3.5 Frame rate ([Rec Quality]: 339) Variable frame rate ([Variable Frame Rate]: 383) Shutter speed Aperture value (2) Exposure mode (Setting the Exposure for Recording Videos: 332) Exposure compensation value (Exposure Compensation: 270) Manual Exposure Assist (Manual Exposure Assist: 267) Image area of video ([Image Area of Video]: 349) TC DF 00:00:00.
18. Materials – Monitor/Viewfinder Displays (3) MOV 420/8-L FHD 59.94p Recording file format ([Rec. File Format]: 338) Recording quality ([Rec Quality]: 339) Card slot (Inserting Cards (Optional): 60) Double card slot function ([Double Card Slot Function]: 119) 24m59s Video recording time (Number of Still Images That Can Be Taken and Video Recording Time with Cards: 767) Wi-Fi/Bluetooth connection state (Checking operation of the Wi-Fi and Bluetooth functions: 612) Streaming function is ON (16.
18.
18. Materials – Monitor/Viewfinder Displays Playback Screen 2021.12.1 10:00 100-0001 1/999 8m30s 3 (1) (2) (3) (4) 60 F3.5 ±0 ISO200 (5) (1) Playback mode ([Playback Mode]: 600) 2021.12.
18.
18. Materials – Monitor/Viewfinder Displays (3) Playback (video) (Playing Back Videos: 447) Group images (Group Images: 457) Time code (Time Code: 351) 48kHz/16bit XLR microphone adaptor setting (XLR Microphone Adaptor (Optional): 440) MP4 FHD 420/8-L 59.94p Recording file format ([Rec. File Format]: 338) Recording quality ([Rec Quality]: 339) Recording frame rate ([Rec Quality]: 339) 60/59.
18.
18.
18. Materials – Message Displays Message Displays Meanings of main messages displayed on the camera screen, and response methods. Card [Memory Card Error]/[Format this card?] • It is a format that cannot be used with the camera. Either insert another card, or back up any necessary data before formatting. (Formatting Cards (Initialization): 63) [Memory Card Error]/[This memory card cannot be used] • Use a card compatible with the camera. (Memory Cards That Can Be Used: 26) [Insert memory card again.
18. Materials – Message Displays [Recording was cancelled due to the limitation of the writing speed of the card] • The card does not meet the writing speed requirements for recording. Use a card of a supported Speed Class. (Memory Cards That Can Be Used: 26) • If the recording stops even when you are using a card that meets the specified Speed Class rating, the data writing speed of the card is getting slow. We recommend backing up data, and formatting.
18. Materials – Message Displays Battery [This battery cannot be used] • Use a genuine Panasonic battery. If this message is displayed even when a genuine Panasonic battery is used, contact the dealer. • If the terminal of the battery is dirty, remove the dirt and dust from the terminal. [The life span of this battery installed in the camera is starting to decline and should be considered for replacement. To maintain reliability refrain from using this battery.
18. Materials – Troubleshooting Troubleshooting ≥ Power, Battery: 737 ≥ Recording: 738 ≥ Video: 743 ≥ Playback: 744 ≥ Monitor/Viewfinder: 745 ≥ Flash: 745 ≥ Wi-Fi Function: 746 ≥ TV, PC, Printer: 749 ≥ Others: 750 First, try out the following procedures. If the problem is not resolved, it may be improved by selecting [Reset] ([Reset]: 101) on the [Setup] ([Setting]) menu. Power, Battery The camera turns off automatically. • [Power Save Mode] is enabled.
18. Materials – Troubleshooting Recording Recording stops before finishing. Cannot record. Cannot use some functions. • In high ambient temperatures or if the camera is continuously used for High-definition video recording, high-speed burst pictures, and HDMI output etc., the temperature of the camera will rise. If the camera temperature rises, [ ] will be displayed blinking on the screen.
18. Materials – Troubleshooting The recorded image is too bright or dark. • Ensure AE Lock is not set where it is not appropriate. (Locking Focus and Exposure (AF/AE Lock): 272) Multiple images are recorded at once. • When drive mode is set to [ ] (Burst Shot), pressing and holding the shutter button will take burst pictures. (Selecting the Drive Mode: 183) • When [Bracketing] is set, then pressing the shutter button records multiple images while automatically changing the settings.
18. Materials – Troubleshooting The recorded image looks rough. Noise appears on the picture. • Try the following: – Reduce the ISO sensitivity. (ISO Sensitivity: 274) – Increase [Noise Reduction] of [Photo Style] to the positive direction, or adjust each item other than [Noise Reduction] to the negative direction. (Adjusting Image Quality: 289) – Set [Long Exposure NR] to [ON].
18. Materials – Troubleshooting Striping or flicker may appear under lighting such as fluorescent or LED lighting. • This is characteristic of MOS sensors which serve as the camera’s pickup sensors. This is not a malfunction. • When using the electronic shutter ([Shutter Type]: 241), lowering the shutter speed may reduce the effect of the horizontal stripes. • If flicker or horizontal stripes are noticeable when recording video, this can be mitigated by fixing the shutter speed.
18. Materials – Troubleshooting The brightness or coloring of the recorded image is different from the actual scene. • When recording under lighting such as fluorescent or LED lighting, increasing the shutter speed may introduce slight changes to brightness or coloring. These are a result of the characteristics of the light source and do not indicate a malfunction.
18. Materials – Troubleshooting Video Cannot record videos. • When using a large capacity card, you may not be able to record for a while after turning on the camera. Video recording stops in the middle. • Recording video requires a card of a supported Speed Class. Use a compatible card. (Memory Cards That Can Be Used: 26) In videos, abnormal clicking and buzzing sounds are recorded. The recorded audio is very quiet.
18. Materials – Troubleshooting Playback Cannot playback. There are no recorded pictures. • Folders and images processed on a PC cannot be played on the camera. • Some images are not displayed when the [Playback Mode] is set. Set to [Normal Play]. ([Playback Mode]: 600) • Videos recorded with a different [System Frequency] setting cannot be played back. Return the [System Frequency] setting to the one you used during the recording.
18. Materials – Troubleshooting Monitor/Viewfinder The monitor/viewfinder turns off when the camera is turned on. • If no operations are performed during the set time period, [Auto LVF/Monitor Off] ([Auto LVF/Monitor Off]: 58) is activated, and the monitor/viewfinder turns off. • When an object or your hand is positioned near the eye sensor, the monitor display may switch to the viewfinder display. It may flicker for an instant or the brightness of the screen may change significantly for an instant.
18. Materials – Troubleshooting Wi-Fi Function A Wi-Fi connection cannot be established. Radio waves get disconnected. Wireless access point is not displayed. General tips for using a Wi-Fi connection • Use within the communication range of the device to be connected. • Usage near devices that utilize the 2.4 GHz frequency such as microwave ovens and cordless telephones may result in the radio wave being lost. Use the camera at a sufficient distance from these devices.
18. Materials – Troubleshooting Cannot connect with a wireless access point. • The wireless access point information set on the camera is wrong. Check the authentication type and encryption key. (Connecting by Manual Input: 666) • Radio waves from other devices may block the connection to a wireless access point. Check the status of other devices that are connected to the wireless access point as well as the status of other wireless devices. Wi-Fi connection on an iOS device fails.
18. Materials – Troubleshooting The PC is not recognized when I use a Wi-Fi connection. The camera cannot be connected to the PC using the Wi-Fi function. • At the time of purchase, this camera is set to use a workgroup name of “WORKGROUP”. If you have changed the workgroup name of the PC, this will not be recognized. In the [Wi-Fi Setup] menu, [PC Connection], change the workgroup name of the PC to which to connect. ([PC Connection]: 675) • Check that the login name and password are correctly typed.
18. Materials – Troubleshooting TV, PC, Printer The TV images are displayed with gray bands. • Depending on the [Aspect Ratio], gray bands may be displayed on the top and bottom or the left and right of the images. You can change the band color in [Background Color(Playback)] in [HDMI Connection] of the [Setup] ([IN/OUT]) menu. ([HDMI Connection]: 591) Images cannot be imported even when connected to a PC. • Set the [USB Mode] of the camera to [PC(Storage)]. ([USB]: 590) • Turn the camera off and on.
18. Materials – Troubleshooting Others When the camera is shaken, a rattling sound is heard from the camera. • The sound is caused by the in-body stabilizer. This is not a malfunction. There is rattling noise from the lens when the camera is turned on or off, or when the camera is swung. There is a sound from the lens when recording. • This is the sound of the lens moving and aperture operation. It is not a malfunction. An unreadable language was selected by mistake.
18. Materials – Cautions for Use Cautions for Use The camera Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). • If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation. • Do not use this unit near cell phones because doing so may result in noise adversely affecting the pictures and/or sound.
18. Materials – Cautions for Use Do not spray the camera with insecticides or volatile chemicals. • If the camera is sprayed with such chemicals, the body of the camera may be damaged and the surface finish may peel off. Do not keep products made of rubber, PVC or similar materials in contact with the camera for a long period of time.
18. Materials – Cautions for Use Cleaning Before cleaning the camera, remove the battery or the DC Coupler, and disconnect the power plug from the electrical outlet. Then wipe the camera with a dry, soft cloth. • When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet cloth, and then with a dry cloth. • Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc.
18. Materials – Cautions for Use Removing dirt on the image sensor The image sensor is very precise and delicate, so be sure to observe the following when you do have to clean it yourself. • Blow dust off the surface of the image sensor using a commercially available blower. Do not blow the dust off with excessive power. • Do not put the blower further inside than the lens mount. The blower can scratch the image sensor if it touches. • Do not use any objects except a blower to clean the image sensor.
18. Materials – Cautions for Use Monitor/Viewfinder • Do not push hard on the monitor. This may cause irregular coloration or malfunction. • Extremely high precision technology is employed to produce the monitor/viewfinder screen. However there may be some dark or bright spots, or spots that light constantly (red, blue, or green) on the screen. This is not a malfunction.
18. Materials – Cautions for Use (A) • To improve the dust and splash resistant performance of the interchangeable lens (H-ES12060/H-FS12060), a lens mount rubber is used in the mount. – The lens mount rubber will leave scuff marks on the digital camera mount, but this does not impact performance. – To replace the lens mount rubber, contact Panasonic. Battery The battery is a rechargeable lithium ion battery.
18. Materials – Cautions for Use Do not allow battery terminals to come into contact with metal objects (such as necklaces, hairpins, etc.). • This can cause short-circuiting or heat generation and you may be badly burned if you touch a battery. Charger, AC Adaptor • The charging lights may blink under the influence of static electricity or electromagnetic wave, depending on the charging environment. This phenomenon has no effects on charging.
18. Materials – Cautions for Use Card Do not leave the card in areas with high temperatures, direct sunlight, or areas prone to electromagnetic waves and static. Do not bend or drop the card. Do not subject the card to strong vibration. • Otherwise, the card and recorded data may be damaged. • Put the card in the card case or the storage bag after use and when storing or carrying the card. • Do not allow dirt, water or other foreign objects to get into the contacts on the card.
18. Materials – Cautions for Use Personal Information Personal information is stored within the camera and in recorded images. We recommend that you enhance security by setting a Wi-Fi password and Wi-Fi function lock to protect personal information. ([Wi-Fi Setup] Menu: 675) • Images may contain information that can be used to identify the user, such as recording dates and times, and location information. Confirm details carefully before uploading images to a web service.
18. Materials – Cautions for Use Points to remember when disposing of/transferring the memory card Format or delete using the camera or a PC will only modify the file management information, so it will not delete the data in the card completely. We recommend physically destroying the card or using commercially available PC data deletion software to delete the card data completely when disposing of/ transferring the card. You are responsible for handling of data on cards.
18. Materials – Cautions for Use Tripod • Make sure the tripod is stable when the camera is attached to it. • When using a tripod, removal of the battery may not be possible. • When using this unit with a large-diameter lens, the lens may come into contact with the pedestal depending on the tripod. Tightening the screw with the lens and pedestal in contact with each other may damage this unit or the lens.
18. Materials – Cautions for Use There is the risk that data sent and received via radio waves may be intercepted Please note that there is the risk that data sent and received via radio waves may be intercepted by a third party. Do not use the camera in areas with magnetic fields, static electricity or interference • Do not use the camera in areas with magnetic fields, static electricity or interference, such as near microwave ovens. These may cause the interruption of the radio waves.
18. Materials – Number of Pictures That Can Be Taken and Available Recording Time with the Battery Number of Pictures That Can Be Taken and Available Recording Time with the Battery Listed below are the numbers of pictures that can be taken and the time lengths available for recording when the supplied battery is being used. • The number of pictures that can be taken is according to the CIPA (Camera & Imaging Products Association) standards. • Using a Panasonic UHS-II compatible SDXC memory card.
18. Materials – Number of Pictures That Can Be Taken and Available Recording Time with the Battery Recording Videos (When Using the Monitor) [Rec.
18. Materials – Number of Pictures That Can Be Taken and Available Recording Time with the Battery [Rec.
18. Materials – Number of Pictures That Can Be Taken and Available Recording Time with the Battery Playback (When Using the Monitor) When the interchangeable lens (H-ES12060) is used Playback time (minutes): 240 When the interchangeable lens (H-FS12060) is used Playback time (minutes): 250 • The number of pictures that can be taken and the available recording time vary depending on the surrounding environment and the usage conditions.
18. Materials – Number of Still Images That Can Be Taken and Video Recording Time with Cards Number of Still Images That Can Be Taken and Video Recording Time with Cards Listed below are the numbers of pictures and the time lengths of videos that can be recorded on a card. • The values listed are approximate. Number of Still Images That Can Be Taken • [Aspect Ratio]: [4:3]; [Picture Quality]: [FINE] [Picture Size] Card capacity 32 GB 64 GB [L] (20M) 2910 5810 128 GB 11510 [M] (10.
18. Materials – Number of Still Images That Can Be Taken and Video Recording Time with Cards Video Recording Time • “h” is an abbreviation for hour, “m” for minute and “s” for second. • Video recording time is the total time of all the videos which have been recorded. • [Rec. File Format]: [MP4] [System Frequency]: [59.
18. Materials – Number of Still Images That Can Be Taken and Video Recording Time with Cards • [Rec. File Format]: [MOV] [System Frequency]: [59.
18. Materials – Number of Still Images That Can Be Taken and Video Recording Time with Cards [System Frequency]: [50.
18. Materials – Number of Still Images That Can Be Taken and Video Recording Time with Cards • The number of pictures that can be taken and the available recording time will be shorter depending on the SD card used when recording with [Segmented File Recording] or [Loop Recording (video)]. • Depending on the recording conditions and the type of card, number of still images that can be taken, video recording time vary.
18.
18. Materials – List of Default Settings/Custom Saving/Settings Available for Copying Menu [Photo]: Default setting [Focus] [AF Custom Setting(Photo)] [Set 1] [AF Assist Light] [ON] [ON]/[OFF] [ON] [SET] — [FAST] [Focus Peaking] [1-Area AF Moving Speed] Menu [Photo]: Default setting [Flash] [Flash Mode] [ ] [Firing Mode] [TTL] [Flash Adjust.] [n0 EV] [Flash Synchro] [1ST] [Manual Flash Adjust.
18. Materials – List of Default Settings/Custom Saving/Settings Available for Copying Menu [Photo]: Default setting [Others (Photo)] [Bracketing Type] [OFF] [More Settings] — [OFF] [Operation Mode] [ ] [E-Stabilization (Video)] [OFF] [Boost I.S. (Video)] [OFF] [Anamorphic (Video)] [OFF] [Lens Information] [Lens1] [Burst Rate] [H] [Shutter Type] [MECH.] [Shutter Delay] [OFF] [Ex. Tele Conv.
18. Materials – List of Default Settings/Custom Saving/Settings Available for Copying Menu [Video]: Default setting [Image Quality] [Exposure Mode] [P] [Photo Style] [ [Metering Mode] [ ] [ISO Auto Lower Limit Setting] [200] [ISO Auto Upper Limit Setting] [AUTO] [Synchro Scan] [OFF] [Flicker Decrease (Video)] [OFF] [Master Pedestal Level] [0] [SS/Gain Operation] [SEC/ISO] [i.
18. Materials – List of Default Settings/Custom Saving/Settings Available for Copying Menu [Video]: Default setting [Image Format] When [System Frequency] is set to [59.94Hz (NTSC)] or [50.00Hz (PAL)]: [MP4] [Rec. File Format] When [System Frequency] is set to [24.00Hz (CINEMA)]: [MOV] [Image Area of Video] [FULL] When [System Frequency] is set to [59.94Hz (NTSC)]: [FHD/8bit/28M/60p] When [System Frequency] is set to [50.
18. Materials – List of Default Settings/Custom Saving/Settings Available for Copying Menu [Video]: Default setting [Focus] [ON]/[OFF] [OFF] [SET] — [Continuous AF] [MODE1] [AF Assist Light] [ON] [ON]/[OFF] [ON] [SET] — [FAST] [AF Custom Setting(Video)] [Focus Peaking] [1-Area AF Moving Speed] Menu [Video]: Default setting [Audio] [Sound Rec Level Disp.
18. Materials – List of Default Settings/Custom Saving/Settings Available for Copying Menu [Video]: Default setting [Others (Video)] [Silent Mode] [Image Stabilizer] [Self Timer Setting] [OFF] [Operation Mode] [ ] [E-Stabilization (Video)] [OFF] [Boost I.S.
18. Materials – List of Default Settings/Custom Saving/Settings Available for Copying Menu [Custom]: [Photo Style Settings] Default setting [Image Quality] [Show/Hide Photo Style] — [My Photo Style Settings] — [Reset Photo Style] — [ISO Increments] [1/3 EV] [Extended ISO] [OFF] [Multi Metering] [n0EV] [Center Weighted] [n0EV] [Spot] [n0EV] [Highlight Weighted] [n0EV] [Color Space] [sRGB] [Exposure Comp.
18.
18.
18. Materials – List of Default Settings/Custom Saving/Settings Available for Copying [Dial Set.] [Assign Dial (F/SS)] [SET1] [Rotation (F/SS)] [ [Control Dial Assignment] [ ] [Exposure Comp.] [OFF] [Dial Operation Switch Setup] — [Rotation (Menu Operation)] [ ] ] [Joystick Setting] [D.FOCUS Movement] [Video Rec.
18. Materials – List of Default Settings/Custom Saving/Settings Available for Copying [LVF Disp. Set] [ ] [Monitor Disp. Set] [ ] [Horizontal Image Flip(Monitor)] [AUTO] [Vertical Image Flip(Monitor)] [AUTO] [Expo.Meter] [OFF] [Focal Length] [ON] [Blinking Highlights] [OFF] [ON]/[OFF] [OFF] [SET] [LVF/Monitor Disp. Set] [Sheer Overlay] — [I.S.
18.
18.
18. Materials – List of Default Settings/Custom Saving/Settings Available for Copying Menu [Setup]: Default setting [Card/File] [Card Format] — [Double Card Slot Function] [Folder / File Settings] [Recording Method] [ [Destination Card Slot] [ [Select Folder] — ] [Create a New Folder] — [File Name Setting] [Folder Number Link] [File Number Reset] — [Copyright Information] [Artist] [OFF] [Copyright Holder] [OFF] [Display Copyright Info.
18.
18. Materials – List of Default Settings/Custom Saving/Settings Available for Copying Menu [Setup]: Default setting [Setting] [Save to Custom Mode] — [Load Custom Mode] — [Limit No.
18. Materials – List of Default Settings/Custom Saving/Settings Available for Copying Menu [My Menu]: Default setting [Edit My Menu] [Add] — [Sorting] — [Delete] — [Display from My Menu] [OFF] Menu [Playback]: Default setting [Playback Mode] [Playback Mode] [Normal Play] [Slide Show] — [Rotate Disp.
18. Materials – List of Default Settings/Custom Saving/Settings Available for Copying Menu [Playback]: Default setting [Edit Image] [Resize] — [Rotate] — [Video Divide] — [Copy] — Menu [Playback]: Default setting [Others] [Delete Confirmation] ["No" first] [Delete All Images] — *1 Default setting specifications vary depending on the country or area where the camera was purchased. *2 Only the settings of [Streaming Function] and [Streaming Quality] in [Streaming Setup] are saved.
18. Materials – List of Functions That Can Be Set in Each Recording Mode List of Functions That Can Be Set in Each Recording Mode Menu [Photo]: iA P A S M [Image Quality] [Photo Style] [Metering Mode] [Aspect Ratio] [Picture Quality] [Picture Size] [ISO Auto Lower Limit Setting] [ISO Auto Upper Limit Setting] [Long Exposure NR] [ISO Sensitivity (photo)] [Min. Shutter Speed] [i.
18. Materials – List of Functions That Can Be Set in Each Recording Mode Menu P A S M [AF Custom Setting(Photo)] [AF Assist Light] [Photo]: iA [Focus] [Focus Peaking] [ON]/[OFF] [SET] iA P A S M [1-Area AF Moving Speed] Menu [Photo]: [Flash] [Flash Mode] [Firing Mode] [Flash Adjust.] [Flash Synchro] [Manual Flash Adjust.] [Auto Exposure Comp.
18. Materials – List of Functions That Can Be Set in Each Recording Mode Menu iA P A S M [Bracketing Type] [More Settings] [Operation Mode] [E-Stabilization (Video)] [Boost I.S. (Video)] [Anamorphic (Video)] [Lens Information] [Burst Rate] [Shutter Type] [Shutter Delay] [Ex. Tele Conv.
18. Materials – List of Functions That Can Be Set in Each Recording Mode Menu [Video]: iA P A S M [Image Quality] [Exposure Mode] [Photo Style] [Metering Mode] [ISO Sensitivity (video)] [ISO Auto Lower Limit Setting] [ISO Auto Upper Limit Setting] [Synchro Scan] [Flicker Decrease (Video)] [Master Pedestal Level] [SS/Gain Operation] [i.Dynamic Range] [Vignetting Comp.
18. Materials – List of Functions That Can Be Set in Each Recording Mode Menu iA P A S M [Rec.
18. Materials – List of Functions That Can Be Set in Each Recording Mode Menu iA P A S M [Sound Rec Level Disp.] [Mute Sound Input] [Sound Rec Gain Level] [Sound Rec Level Adj.] [Sound Rec Level Limiter] [Wind Noise Canceller] [Wind Cut] [Lens Noise Cut] [Special Mic.
18. Materials – List of Functions That Can Be Set in Each Recording Mode Menu [Video]: iA P A S M [Others (Video)] [Silent Mode] [Image Stabilizer] [Self Timer Setting] [Operation Mode] [E-Stabilization (Video)] [Boost I.S.
18. Materials – Specifications Specifications The specifications are subject to change for performance enhancement. Digital camera body (DC-GH5M2): Information for your safety Power source: 9.0 V Power consumption: 4.5 W (when recording with the monitor), 3.8 W (when playing back with the monitor) [When using the interchangeable lens (H-ES12060)] 4.4 W (when recording with the monitor), 3.
18. Materials – Specifications Image sensor ≥ Image sensor 4/3q Live MOS sensor, total pixel number 21,770,000 pixels, Primary color filter ≥ Effective number of pixels of the camera 20,330,000 pixels Latitude 12 stops ([V-Log L]) Recording format for still images ≥ File format for still images JPEG (DCF compliant, Exif 2.31 compliant) / RAW ≥ File format for 6K/4K photos 6K photo: MP4 (H.265/HEVC, AAC (2ch)) 4K photo: MP4 (H.
18. Materials – Specifications When the aspect ratio setting is [16:9] [L]: 5184k2920 [M]: 3840k2160 [S]: 1920k1080 4K photo: 3840k2160 When the aspect ratio setting is [1:1] [L]: 3888k3888 [M]: 2784k2784 [S]: 1968k1968 4K photo: 2880k2880 ≥ Image quality for pictures Fine / Standard / RAWiFine / RAWiStandard / RAW Recording format for video ≥ Video format MP4 (H.264/MPEG-4 AVC, H.265/HEVC) MOV (H.264/MPEG-4 AVC, H.
18. Materials – Specifications Viewfinder ≥ System Aspect ratio 4:3, 0.5 inches, approx. 3,680,000 dots, organic EL (OLED) live view viewfinder ≥ Field of view ratio Approx. 100 % ≥ Magnification Approx. 0.76k (35 mm film camera equivalent) (j1.0 mj1 50 mm at infinity, with aspect ratio set to [4:3]) ≥ Eye point Approx. 21 mm (at j1.0 mj1) ≥ Diopter adjustment range j4.0 to i3.0 diopter ≥ Eye sensor Yes Monitor ≥ System Aspect ratio 3:2, 3.0 inches, approx.
18.
18. Materials – Specifications White balance AWB / AWBc / AWBw / Daylight / Cloudy / Shade / Incandescent lights / Flash / White set 1, 2, 3, 4 / Color temperature 1, 2, 3, 4 Shutter ≥ Format Focal-plane shutter ≥ Shutter speed Pictures: Mechanical shutter: Bulb (max. approx. 30 minutes), 60 seconds to 1/8000 of a second Electronic front curtain: Bulb (max. approx. 30 minutes), 60 seconds to 1/2000 of a second Electronic shutter: Bulb (max. approx.
18. Materials – Specifications Burst recording ≥ Burst rate High speed (Mechanical shutter/Electronic front curtain): 12 frames/second ([AFS], [MF]), 9 frames/second ([AFC]) High speed (Electronic shutter): 12 frames/second ([AFS], [MF]), 7 frames/second ([AFC]) Medium speed: 7 frames/second Low speed: 2 frames/second ≥ Maximum number of frames recordable [FINE] / [STD.]: 999 frames or more [RAWiFINE] / [RAWiSTD.
18. Materials – Specifications Interface ≥ USB USB Type-C™, SuperSpeed USB3.1 GEN1, Supports USB Power Delivery (9.0 V/ 3.0 A) • Data from the PC cannot be written to the camera using the USB connection cable. ≥ [HDMI] HDMI Type A ≥ [REMOTE] ‰ 2.5 mm jack ≥ [MIC] ‰ 3.5 mm stereo mini jack ≥ Headphones ‰ 3.5 mm stereo mini jack ≥ Flash Synchro Yes Splash Resistant Yes External dimensions / Mass ≥ External dimensions Approx. 138.5 mm (W)k98.1 mm (H)k87.4 mm (D) (5.45q (W)k3.86q (H)k3.
18. Materials – Specifications Operating environment ≥ Recommended operating temperature j10 oC to 40 oC (14 oF to 104 oF) • Battery performance temporarily worsens at low temperatures (j10 oC to 0 oC (14 oF to 32 oF)), reducing the number of pictures that can be taken and the available recording time. ≥ Permissible relative humidity 10 %RH to 80 %RH Wi-Fi ≥ Compliance standard IEEE 802.
18. Materials – Specifications The symbols on this product (including the accessories) represent the following: AC DC Class II equipment (The construction of the product is double-insulated.) • This camera complies with the “Design rule for Camera File system” (DCF) and “Exchangeable Image File Format” (Exif) standards established by “Japan Electronics and Information Technology Industries Association” (JEITA). The camera cannot play back files that do not comply with the DCF standard.
18. Materials – Specifications Maximum diameter Overall length Mass (Weight) ‰68.4 mm (2.7q) Approx. 86 mm (3.4q) (from the tip of the lens to the base side of the lens mount) Approx. 320 g (0.70 lb) Dust and splash resistant Yes Recommended operating temperature Permissible relative humidity j10 oC to 40 oC (14 oF to 104 oF) 10 %RH to 80 %RH • LEICA is a registered trademark of Leica Microsystems IR GmbH. ELMARIT is a registered trademark of Leica Camera AG.
18. Materials – Specifications In focus distance Maximum image magnification Wide: 0.20 m (0.66 feet) to ¶ / Tele: 0.25 m (0.82 feet) to ¶ (from the focus distance reference line) 0.27k (35 mm film camera equivalent: 0.54k) Optical Image Stabilizer Yes Filter diameter 58 mm Maximum diameter ‰66.0 mm (2.6q) Overall length Mass (Weight) Approx. 71 mm (2.8q) (from the tip of the lens to the base side of the lens mount) Approx. 210 g (0.
18. Materials – Trademarks and Licences Trademarks and Licences • Micro Four Thirds™ and Micro Four Thirds Logo marks are trademarks or registered trademarks of OM Digital Solutions Corporation, in Japan, the United States, the European Union and other countries. • SDXC Logo is a trademark of SD-3C, LLC. • The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
18. Materials – Trademarks and Licences • Windows is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. • Final Cut Pro, Mac, OS X and macOS are trademarks of Apple Inc., registered in the U.S. and other countries. • App Store is a service mark of Apple Inc. • Google, Android and Google Play are trademarks of Google LLC. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
18. Materials – Trademarks and Licences This product incorporates the following software: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation, (3) the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0), (4) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL V2.1), and/or (5) open source software other than the software licensed under the GPL V2.
18. Materials – Trademarks and Licences Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
Firmware Update ≥ Firmware Ver. 1.1: F-3 A firmware update has been made available to improve camera capabilities and to add functionality. The subsequent sections describe functions that have been added or modified. • To check the firmware version of the camera, select [Firmware Version] in the [Setup] ([Others]) menu. • For the latest information on the firmware or to download/update the firmware, visit the following support site: https://panasonic.jp/support/global/cs/dsc/download/index.
Firmware Update About Applications/Software When you have updated the firmware for the camera, use the latest version of the application for your smartphone or the software for your PC. “LUMIX Sync” • Install or update the application on your smartphone. “LUMIX Tether” • Check the following site and then download and install the software: https://panasonic.jp/support/global/cs/soft/download/d_lumixtether.
Firmware Ver. 1.
Firmware Ver. 1.1 – Support for Wired LAN Connection Support for Wired LAN Connection ≥ Menu Added: F-5 It is now possible to connect to a wired network with a LAN cable by connecting a commercially available USB ethernet adaptor to the USB port on the camera. (A) (B) (C) (A) USB port (B) USB ethernet adaptor (commercially available) (C) LAN cable • For information about USB ethernet adaptors whose operation has been verified with this camera, check the following support site.
Firmware Ver. 1.1 – Support for Wired LAN Connection Menu Added A menu has been added to the [Wi-Fi Setup] menu for the wired LAN connection, and the [Wi-Fi Setup] menu has become [LAN / Wi-Fi Setup]. Firmware 1.0 ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function]/[Wi-Fi Setup]/ [Streaming Setup]*1 Firmware 1.1 ¨[ ]¨[ Setup] ] ¨ [LAN / Wi-Fi] ¨ [Wi-Fi Function]/[LAN / Wi-Fi *1 The streaming setup menu has been moved by a firmware update.
Firmware Ver. 1.1 – Support for Wired LAN Connection [LAN / Wi-Fi Setup] [Priority of Remote Device] (Î[Priority of Remote Device]: 675) Sets the IP address when connecting via wired LAN. You can select to either automatically allocate the IP address with the DHCP, or set any static IP address. [DHCP Server]: Select when the camera is to be connected as the DHCP server. [DHCP Client]: Select when the camera is to be connected as the DHCP client.
Firmware Ver. 1.1 – Support for Wired LAN Connection [PC Connection] (Î[PC Connection]: 675) [Device Name] (Î[Device Name]: 676) [Wi-Fi Function Lock] has been changed to [LAN / Wi-Fi [LAN / Wi-Fi Function Lock] Function Lock] by the firmware update. Along with the Wi-Fi function, use of the wired LAN function is protected by a password.
Firmware Ver. 1.1 – Connection Methods for Streaming (USB Tethering, Wired LAN) Have Been Added Connection Methods for Streaming (USB Tethering, Wired LAN) Have Been Added ≥ Menu Changes: F-8 ≥ Image Qualities in [Streaming Quality] Have Been Added: F-11 ≥ Using the Streaming Function with USB Tethering Connections: F-14 ≥ Using the Streaming Function with Wired LAN Connections (IP Streaming (RTP/RTSP)): F-17 It is now possible to use USB tethering or wired LAN connection for the streaming function.
Firmware Ver. 1.1 – Connection Methods for Streaming (USB Tethering, Wired LAN) Have Been Added [Streaming]*1 Enables/disables the streaming function. [ON]/[OFF] [Streaming Function] • The settings may not be reflected when the camera is connected to USB devices. Reconnect the USB connection cable if this occurs. • Before setting to [ON], set [Streaming Method], [Connection Method], and [Streaming Setup]. [Direct]: Directly stream from the camera to the live streaming [Streaming Method] service.
Firmware Ver. 1.1 – Connection Methods for Streaming (USB Tethering, Wired LAN) Have Been Added [Streaming Quality] (ÎImage Qualities in [Streaming Quality] Have Been Added: F-11) [RTSP Port]*3: Set the RTSP port number. [CHANGE]: Change to any number. (Up to 65535) [DEFAULT]: Set to the default setting (554).
Firmware Ver. 1.1 – Connection Methods for Streaming (USB Tethering, Wired LAN) Have Been Added Image Qualities in [Streaming Quality] Have Been Added The H.265 (4K/FHD) and H.264 (4K) streaming image qualities have been added. The items you can set depend on the connection method. ¨[ ]¨[ ] ¨ [Streaming] ¨ [Streaming Setup] ¨ Select [Streaming Quality] [Streaming Quality] [System Frequency]: [59.
Firmware Ver. 1.1 – Connection Methods for Streaming (USB Tethering, Wired LAN) Have Been Added H.264/4K/50M/60p 59.94p 50 3 — — H.264/4K/25M/60p 59.94p 25 3 — — 29.97p 25 3 — — 29.97p 12.5 3 3 — 59.94p 16 3 3 3*1 59.94p 8 3 3 3 29.97p 6 3 3 3 H.264/FHD/3M/30p 29.97p 3 3 3 3 H.264/HD/6M/60p 59.94p 6 3 3 3 29.97p 4 3 3 3 (C) (D) (F) (G) H.265/4K/50M/50p 50.00p 50 3 — — H.265/4K/25M/50p 50.00p 25 3 — — 25.00p 25 3 — — 25.00p 12.
Firmware Ver. 1.1 – Connection Methods for Streaming (USB Tethering, Wired LAN) Have Been Added H.264/4K/50M/50p 50.00p 50 3 — — H.264/4K/25M/50p 50.00p 25 3 — — 25.00p 25 3 — — 25.00p 12.5 3 3 — 50.00p 16 3 3 3*1 50.00p 8 3 3 3 25.00p 6 3 3 3 H.264/FHD/3M/25p 25.00p 3 3 3 3 H.264/HD/6M/50p 50.00p 6 3 3 3 25.00p 4 3 3 3 3840k2160 H.264/4K/25M/25p H.264/4K/12.5M/25p H.264/FHD/16M/50p H.264/FHD/8M/50p H.264/ MPEG-4 AVC H.264/FHD/6M/25p H.
Firmware Ver. 1.1 – Connection Methods for Streaming (USB Tethering, Wired LAN) Have Been Added Using the Streaming Function with USB Tethering Connections It is possible to live stream from locations where a router is not available, when you are out and about for example, by connecting the camera to the internet via the mobile data communication (4G/5G, etc.) on your smartphone.
Firmware Ver. 1.1 – Connection Methods for Streaming (USB Tethering, Wired LAN) Have Been Added Getting started: • Confirm that the camera and the smartphone are not connected. 1 2 Set the mode dial to [ ]. Set the menu on the camera. ≥ 1 ¨[ ]¨[ ] ¨ [Streaming] In [Streaming Method], select [Direct], and set [Connection Method] to [USB Tethering]. 2 In [Streaming Setup], set [Streaming Quality] and the streaming destination.
Firmware Ver. 1.1 – Connection Methods for Streaming (USB Tethering, Wired LAN) Have Been Added 3 4 Connect the camera and the smartphone using a USB connection cable. Enable the USB tethering function on the smartphone. ≥Select [USB Tethering] (for Android devices) or [Personal Hotspot] (for iOS devices) on the smartphone. • If a confirmation message appears on the smartphone screen asking for permission to enable access by the connected device, grant permission.
Firmware Ver. 1.1 – Connection Methods for Streaming (USB Tethering, Wired LAN) Have Been Added Using the Streaming Function with Wired LAN Connections (IP Streaming (RTP/RTSP)) You can perform live streaming with IP streaming (RTP/RTSP) by connecting a commercially available USB ethernet adaptor to the camera. (A) (B) (C) (D) (C) (A) USB port (B) USB ethernet adaptor (commercially available) (C) LAN cable (D) Router Getting started: • Install the RTP/RTSP compatible streaming software onto your PC.
Firmware Ver. 1.1 – Connection Methods for Streaming (USB Tethering, Wired LAN) Have Been Added 3 Set up streaming settings on the camera. ≥ 1 ¨[ ]¨[ ] ¨ [Streaming] In [Streaming Method], select [Via PC Software], and set [Connection Method] to [LAN]. 4 5 2 In [Streaming Setup], set [Streaming Quality] and [RTSP Port]. 3 Set [Streaming Function] to [ON]. • [ ] is displayed on the recording screen.
Firmware Ver. 1.1 – Support for “LUMIX Tether” Wired LAN Connections Support for “LUMIX Tether” Wired LAN Connections ≥ [Tether(USB ethernet adaptor)] Has Been Added: F-20 ≥ Using “LUMIX Tether” with a Wired LAN Connection: F-21 ≥ Support for Remote Control of Multiple Cameras: F-23 Connect the camera and a PC with a LAN cable, then use the “LUMIX Tether” camera control software to control your camera remotely. • Use the latest version of “LUMIX Tether”.
Firmware Ver. 1.1 – Support for “LUMIX Tether” Wired LAN Connections [Tether(USB ethernet adaptor)] Has Been Added This enables connection to “LUMIX Tether” with a wired LAN connection. ¨[ ]¨[ adaptor)] ] ¨ [USB] ¨ Select [Tether(USB ethernet Settings: [ON]/[OFF] • When this function is not to be used, set this setting to [OFF]. When set to [ON], power is supplied from the battery of this camera to the connected device, so the battery will be consumed faster.
Firmware Ver. 1.1 – Support for “LUMIX Tether” Wired LAN Connections Using “LUMIX Tether” with a Wired LAN Connection (A) (B) (C) (D) (A) USB port (B) USB ethernet adaptor (commercially available) (C) LAN cable (D) A PC on which “LUMIX Tether” is installed 1 Set the camera as a DHCP server. ≥ ¨[ ]¨[ ] ¨ [LAN / Wi-Fi] ¨ [LAN / Wi-Fi Setup] ¨ [IP Address Setting (LAN)] ¨ [DHCP Server] • If you have modified settings in [IP Address Setting (LAN)], turn the camera 2 off and on again.
Firmware Ver. 1.1 – Support for “LUMIX Tether” Wired LAN Connections 3 4 Connect the commercially available USB ethernet adaptor to the camera, then use a LAN cable to connect the camera and the PC. Use “LUMIX Tether” to remotely control the camera. ≥(Initial connection) Set the password to be used to connect from “LUMIX Tether” to the camera. (Between 8 and 31 characters) ≥[ ] is displayed on the top right of the camera’s screen.
Firmware Ver. 1.1 – Support for “LUMIX Tether” Wired LAN Connections Support for Remote Control of Multiple Cameras A number of cameras can be remotely controlled using “LUMIX Tether”. (A) (B) (C) (B) (D) (A) USB ethernet adaptor (commercially available) (B) LAN cable (C) Router (or hub) (D) A PC on which “LUMIX Tether” is installed For example: When there is a DHCP server in the LAN, and the camera is to be connected as a DHCP client 1 Set the camera as a DHCP client (default setting).
Firmware Ver. 1.1 – Support for “LUMIX Tether” Wired LAN Connections 2 Do the operations in “Using “LUMIX Tether” with a Wired LAN Connection” from Step 2. ≥Connect the cameras, PC, and router (hub) according to the above diagram. ≥You can operate “LUMIX Tether” and remotely control all connected cameras as a group, or select any individual camera to control remotely.
Firmware Ver. 1.1 – Precautions When Inserting a Battery into the Camera for Charging Precautions When Inserting a Battery into the Camera for Charging After connecting via wired LAN or USB tethering, when charging the battery in the camera, make sure that the charging light of the camera lights red. If the charging light does not light, reconnect the USB connection cable while the camera is turned off.
Firmware Ver. 1.1 – [Live View Composite] Has Been Added [Live View Composite] Has Been Added Images are recorded over several times and only the parts that change to become brighter form part of the composition. The images composed by recording at a set exposure time (shutter speed) are displayed, allowing the images to be confirmed as recording proceeds.
Firmware Ver. 1.1 – [Live View Composite] Has Been Added 3 4 5 Start Live View Composite recording. ≥Select [Start] and then press or . Decide on the composition and then fix the camera in place. Set the shutter speed and ISO sensitivity. ≥Rotate to set the shutter speed. • The shutter speed can be set in the range between 60 seconds and 1/2 of a second. 5” ≥Press [ISO], then rotate , , or to set the ISO sensitivity.
Firmware Ver. 1.1 – [Live View Composite] Has Been Added 7 Start recording. ≥Press the shutter button fully. 5 • Recording is done according to the settings in Step , and images processed with noise reduction are merged a frame at a time. LC 5 sec. x 1200 1h40m00s (A) (B) (C) (A) Histogram display (B) Shutter speed k Number of images merged 8 (C) Elapsed time Stop recording. ≥Press the shutter button fully. • A maximum of 3 hours can be recorded with one Live View Composite recording.
Firmware Ver. 1.1 – [Live View Composite] Has Been Added • [Long Exposure NR] will be [ON]. • When recording with the flash, the flash fires only in the first frame. • [Flash Synchro] is fixed to [1ST]. • The image for noise reduction is discarded when you do the following. Do Step again. 6 – Modify the shutter speed/ISO sensitivity – Switch the playback mode • When pressing the shutter button fully to end recording, the last image may not be merged.
Firmware Ver. 1.1 – Rotational Angle to [Focus Ring Control] Has Been Added Rotational Angle to [Focus Ring Control] Has Been Added When [Focus Ring Control] is set to [LINEAR], it is now possible to set the rotational angle of the focus ring to a maximum of 1080 degrees.
Firmware Ver. 1.1 – Added Menus Added Menus Specifications information for the menus added by the firmware update.
