Operating Instructions
Table Of Contents
- About Operating Instructions
- Chapters
- Contents
- Contents by Function
- 1. Introduction
- 2. Getting Started
- 3. Basic Operations
- 4. Recording mode
- 5. Image Recording
- 6. Focus/Zoom
- 7. Drive/Shutter/Image Stabilizer
- Selecting the Drive Mode
- Taking Burst Pictures
- 4K Photo Recording
- Selecting Pictures from a 4K Burst File
- Post-Focus Recording
- Recording Using the Self-timer
- Recording with Time Lapse Shot
- Recording with Stop Motion Animation
- Time Lapse Shot/Stop Motion Animation Videos
- Bracket Recording
- [Silent Mode]
- [Shutter Type]
- Image Stabilizer
- 8. Brightness (Exposure)/Coloring/Picture effect
- 9. Flash
- 10. Recording Videos
- 11. Playing Back and Editing of Images
- 12. Camera Customization
- 13. Menu Guide
- 14. Wi-Fi/Bluetooth
- 15. Connecting to Other Devices
- 16. Materials
- Using Optional Accessories
- Monitor/Viewfinder Displays
- Message Displays
- Troubleshooting
- Cautions for Use
- Number of Pictures That Can Be Taken and Available Recording Time with the Battery
- Number of Still Images That Can Be Taken and Video Recording Time with Cards
- List of Functions That Can Be Set in Each Recording Mode
- Specifications
- Index
- Trademarks and Licenses
- Firmware Update
361
13. Menu Guide
[Folder / File
Settings]
[Select Folder]/[Create a New Folder]/[File Name Setting]
Set the folder and file name where to save the images.
• For details, refer to page 123.
[No.Reset]
Resets the file number of the next recording to 0001.
• For details, refer to page 125.
[Reset]
Returns the camera to its default settings.
• For details, refer to page 69.
[Reset Network
Settings]
Network settings are reset to the default, such as equipment
information you have registered using [Wi-Fi Setup] or
[Bluetooth].
(Excluding [LUMIX CLUB])
[Pixel Refresh]
This optimizes the image sensor and image processing.
• The image sensor and image processing are optimized
when the camera is purchased. Use this function when
bright spots that do not exist in the subject get recorded.
• Turn the camera off and on after the pixels are corrected.
[Level Gauge
Adjust.]
[Adjust.]
Hold the camera in a horizontal position, and press
. The
level gauge will be adjusted.
[Level Gauge Value Reset]
Restores the default level gauge setting.
[Demo Mode]
You can try focusing, peaking, etc. in [Post Focus], with the
image picture.
[Format]
Formats the card (initialization).
• For details, refer to page 40.