Manualshelf

Operating Instructions

ManualsBrandsPanasonic ManualsAV ProductsDCFT7GN
12
2
Selecting the desired focus area and saving a picture
1
Recording with the Post Focus function
2
Selecting pictures from 4K burst fi le and saving
Press [ 1 ] .
Press
2 /to select an image indicated with the [ ] icon, and press the cursor button .
The slide view screen for selecting pictures will be displayed.
Press 3 /to select the frame to be saved as a picture.
Select [ ]/[ ] and press [MENU/SET] to switch to the previous or next slide view.
Press [Fn1] to switch to marker operation. You can press / to skip to the next marker position.
([4K Burst(S/S)] only)
You can also select scenes on the 4K burst playback screen by pressing [Fn2]. ([4K Burst]/[4K Burst(S/S)] only)
If you press , continuous playback will start. Press to pause at the scene to be saved as a picture.
Press [MENU/SET] to save the picture.4
The picture will be saved in JPEG format.
The camera can perform Burst recording in the same picture quality as 4K photo recording while automatically shifting the focus to different areas.
After the recording, you can select the desired area on the screen and save a picture in which the selected area is in focus.
Controlling Focus After Recording (Post Focus)
Press [ 1 ] .
Press
2 /to select an image indicated with the [ ] icon, and press the cursor button .
Press 3 /// to select the focus area.
If a picture that is in focus is not available for the selected area, a red frame will be displayed. You cannot save a picture in this case.
Press [MENU/SET] to save the picture.4
The picture will be saved in JPEG format.
Fn2
Press [ 1 ] .
Press the cursor buttons
2 / to select [ON] and then press [MENU/SET].
Decide on the composition, and press the shutter button halfway.
3
Maintain the same distance to the subject and the same composition.
Press the shutter button fully to start recording.4
The focus point changes automatically while recording. When the icon disappears, recording automatically ends.
Cancelling [Post Focus]: In step 2, select [OFF].
R5
m
04
04
s
R5
m
04
s
DC-FT7_DVQW1387_4KPHOTO_EB_eng.indd 2DC-FT7_DVQW1387_4KPHOTO_EB_eng.indd 2 2018/04/05 13:55:082018/04/05 13:55:08