Operating Instructions
Table Of Contents
- Information for Your Safety
- About Operating Instructions
- Contents
- 1. Introduction
- 2. Getting Started
- 3. Basic Operations
- 4. Recording Videos
- 5. Recording settings
- 6. Special Video Recording
- 7. Output image
- 8. Connections with External Devices
- 9. Playback
- 10. Camera Customization
- 11. Menu Guide
- 12. Remote Operations
- 13. Materials
- Firmware Update
- 126 -- 126 -
6. Special Video Recording - [Synchro Scan]
[Synchro Scan]
Fine-adjust the shutter speed to reduce flickering and horizontal stripes.
The shutter speed set in Synchro Scan is saved separately from the shutter speed used for normal recording. In the Synchro
Scan setting screen you can call up the current shutter speed for normal recording and adjust it.
1 Set the exposure mode to [S] or [M].
●
[MENU/SET] [ ] [ ] [Exposure Mode] [S] / [M]
2 Set [Synchro Scan].
●
[MENU/SET] [ ] [ ] [Synchro Scan] [ON]
3 Set the shutter speed.
●
Rotate to select a numeric value, then press [MENU/SET].
●
You can call up the current shutter speed for normal recording by pressing [Fn1].
●
Adjust the shutter speed while looking at the screen so that flickering and horizontal stripes will be minimized.
64
●
When you set [Synchro Scan] to [ON], the available shutter speed range becomes narrower.