Basic Operating Instructions Digital Camera Model No. DC-TZ95/DC-TZ96 DC-TZ97 Please read these instructions carefully before using this product, and save this manual for future use. More detailed operating instructions are available in “Operating Instructions for advanced features (PDF format)”. To read it, download it from the website. (→65) Web Site: http://www.panasonic.com Model number suffix “EB” denotes UK model.
Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic Digital Camera. Please read these Operating Instructions carefully and keep them handy for future reference. Please note that the actual controls and components, menu items, etc. of your Digital Camera may look somewhat different from those shown in the illustrations in these Operating Instructions. Carefully observe copyright laws.
■ About the battery pack CAUTION • Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer. • When disposing of the batteries, please contact your local authorities or dealer and ask for the correct method of disposal. • Do not heat or expose to flame. • Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed. Warning Risk of fire, explosion and burns.
■ Cautions for Use • Do not use any other USB connection cables except the supplied one. • Use a “High Speed HDMI micro cable” with the HDMI logo. Cables that do not comply with the HDMI standards will not work. “High Speed HDMI micro cable” (Type D - Type A plug, up to 2 m (6.6 feet) long) Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.).
Declaration of Conformity (DoC) Hereby, “Panasonic Corporation” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Customers can download a copy of the original DoC to our RE products from our DoC server: http://www.ptc.panasonic.
• To clean your camera, remove the battery, the DC coupler (DMW-DCC11: optional) or a card, or disconnect the power plug from the outlet, and wipe with a soft, dry cloth. • Do not press the monitor with excessive force. • Do not press the lens with excessive force. • Do not allow camera to come into contact with pesticides or volatile substances (can cause surface damage or coating to peel). • Do not keep rubber or plastic products in contact with the camera for a long period of time.
• The battery is not charged when the camera is shipped. Charge the battery before use. • The battery is a rechargeable lithium ion battery. If the temperature is too high or too low, the operating time of the battery will become shorter. • The battery becomes warm after using and during and after charging. The camera also becomes warm during use. This is not a malfunction. • Do not leave any metal items (such as clips) near the contact areas of the power plug or near the batteries.
Contents ■ Information for Your Safety ...................... 2 Playback Preparations/Basics ■ ■ ■ ■ ■ ■ Menu ■ ■ Before use.................................................. 9 Standard accessories ............................. 10 Digital Camera Accessory System .........11 Names and Functions of Main Parts ..... 12 Quick Start Guide .................................... 14 Inserting the battery and/or SD memory card (optional) ....................... 14 Charging the battery..........................
Preparations/Basics Before use ■ Camera handling Keep the camera away from excessive vibration, force, or pressure. ● Avoid using the camera under the following conditions, which may damage the lens, monitor, viewfinder, or camera body. This may also cause the camera to malfunction or prevent recording.
Preparations/Basics Standard accessories Check that all the accessories are supplied before using the camera. Part numbers are as of March 2019. These may be subject to change. Battery pack DMW-BLG10E • Charge the battery before use. • Battery pack is indicated as battery pack or battery in the text. AC adaptor SAE0012F USB connection cable K1HY04YY0106 Hand strap VFC4297 • Cards are optional. (SD Memory Card, SDHC Memory Card and SDXC Memory Card are indicated as card in the text.
Preparations/Basics Digital Camera Accessory System Description Battery pack Battery charger AC adaptor DC coupler Accessory# DMW-BLG10 DMW-BTC12 DMW-AC10 DMW-DCC11 The AC adaptor (optional) can only be used with the designated Panasonic DC coupler (optional). The AC adaptor (optional) cannot be used by itself. When using an AC adaptor (optional), use the AC mains lead supplied with the AC adaptor. ● Part numbers are as of March 2019. These may be subject to change.
Preparations/Basics Names and Functions of Main Parts 1 2 3 7 8 9 6 5 4 16 10 15 14 18 19 20 21 12 11 17 22 23 10 27 24 25 26 33 12 13 DVQX1818 (ENG) 32 31 30 29 28
Preparations/Basics 1 2 3 4 5 6 7 8 Shutter button (→20) Zoom lever (→21) Motion picture button (→36) Camera [ON/OFF] button (→17) Mode dial (→19) Stereo microphone Viewfinder (→18) Dioptre adjustment dial • Rotate the dioptre adjustment dial to adjust until you are able to clearly see the characters displayed in the viewfinder. 9 Eye sensor (→18) 10 Strap eyelet • To prevent dropping, be sure to attach the supplied strap and fit it to your wrist.
Preparations/Basics Quick Start Guide Inserting the battery and/or SD memory card (optional) Make sure that the camera is turned off. 1 Slide the release lever ( ) to the [OPEN] [OPEN] [LOCK] position and open the card/battery door Insert the battery and card, making sure 2 that their orientation is correct • Battery: Insert the battery all the way firmly and check that it is locked by lever ( ). • Card: Insert the card all the way firmly until it clicks. Do not touch the terminal.
Preparations/Basics Charging the battery • The battery that can be used with this unit is DMW-BLG10E. • We recommend charging in a location where the ambient temperature is between 10 °C and 30 °C (50 °F to 86 °F) (same for the battery temperature). Insert the battery into the camera. Make sure that the camera is turned off. Charging lamp (Red) AC adaptor (supplied) To the electrical outlet USB connection cable (supplied) Computer • Turn on the computer.
Preparations/Basics Charging from the power outlet Connect the AC adaptor (supplied) and this camera with the USB connection cable (supplied), and insert the AC adaptor (supplied) into the power outlet. Charging from a computer Connect the computer and this camera with the USB connection cable (supplied). ■ Charging lamp indications (Red) On: Charging in progress Off: Charging complete (After charging stops, disconnect the camera from the electrical outlet or your computer.
Preparations/Basics Setting the clock The clock is not set when the camera is shipped. 1 Turn the camera on 2 Press [MENU/SET] 3 Press to select the items (year, month, day, hour, minute), and press to set 4 Press [MENU/SET] 5 When [The clock setting has been completed.
Preparations/Basics Formatting the card (initialisation) Format the card before recording a picture with this unit. Since data cannot be recovered after formatting, make sure to back up necessary data in advance.
Preparations/Basics Mode dial (Select the recording mode) 1 Set to the desired recording mode • Rotate the mode dial slowly to select the desired mode. • When you set the mode dial to [ ], the camera automatically optimises the main settings. Intelligent Auto Mode (→26) Intelligent Auto Plus Mode (→26) Programme AE Mode Take pictures with automatic shutter speed and aperture value settings. Aperture-Priority AE Mode Determine aperture, then take pictures.
Preparations/Basics Holding the camera • Do not block the flash, AF Assist Lamp, microphone, or speaker with your fingers or other objects.
Preparations/Basics Basic operations Zoom lever (Use zoom) Optical Zoom: You can zoom in without degrading the picture quality. Maximum magnification: 30x Capture a wider area (wide-angle) Enlarge the subject (telephoto) Extra optical zoom: This function works when picture sizes with [ ] have been selected in [Picture Size]. Extra optical zoom allows you to zoom in using a higher zoom ratio than optical zoom, without degrading the picture quality. Maximum magnification: 59.
Preparations/Basics ■ [Zoom Compose Assist] button (Using the Zoom Compose Assist function) If you lose the subject while zoomed in: Press and hold [ ] ([Zoom Compose Assist]) button • A frame indicating the original zoom magnification (angle of view) will appear. When you find the subject: Align the frame with the subject and release your finger from the button Control ring/Control dial You can use the control ring ( )/control dial ( ) to change the settings for recording.
Preparations/Basics Cursor button Selection of items or setting of values etc., is performed. You can perform the following operations while recording. (Some items or settings cannot be selected depending on the mode or display style the camera is in.) [ ] (Exposure Compensation) ( ) • Corrects the exposure when there is a backlight or when the subject is too dark or too bright. [ ] ([Flash Mode]) ( ) • Changes flash mode.
Preparations/Basics Function buttons • [Fn1] to [Fn4] are buttons on the camera. • Function buttons [Fn5] to [Fn9] are touch icons. They can be displayed by touching the [ ] tab on the recording screen. • You can assign frequently-used functions to particular buttons or icons with [Fn Button Set] (→41) in [Custom] ([Operation]) menu. Touch screen (Touch operations) Touch To touch and release the touch screen. Drag To touch and slide your finger across the touch screen.
Preparations/Basics Setting the menu 1 Press [MENU/SET] to bring up the menu 2 Switch the menu type Press Press to select a tab such as [ Press [MENU/SET] ] ■ Menu types • • [Rec] [Setup] • • [Motion Picture] [My Menu] [Custom] [Playback] • • • Menus to be displayed in each recording mode (→39) 3 Press to select the menu item and press [MENU/SET] • You can also switch to the next page by rotating the zoom lever.
Recording Taking pictures with automatic settings (Intelligent Auto Mode) This mode is recommended for those who want to point and shoot as the camera optimises settings to match the subject and recording environment. 1 Set mode dial to [ ] • At the time of purchase, the mode is set to Intelligent Auto Mode. 2 Point the camera at the subject • When the camera identifies the optimal scene, the icon switches to the one for that scene.
Recording Taking Pictures of Yourself [Self Shot] Recording mode: You can easily take pictures of yourself while looking at the screen. 1 Rotate the monitor as shown in the figure 2 Touch the item • You can record with the 4K Photo function ] (4K Selfie). When using by touching [ this function, only [Filter Select] can be selected. For details on how to record, refer to steps 3 - 4 of “Recording with the 4K Photo function”.
Recording Taking pictures of yourself in Panorama Shot Mode By recording with Panorama Shot Mode, you can enjoy a variety of self-portraits, such as those with your friends or those incorporating a wide background.
Recording Recording with the 4K Photo function Recording mode: You can take burst pictures of approximately 8 million pixels with a burst rate of 30 fps. You can select and save a frame from the burst file. • To record pictures, use a UHS Speed Class 3 card. 1 Press [ 2 Press 3 Press ] button ( ) to select the 4K photo and press to select the recording method and press [MENU/SET] [4K Burst] [4K Burst(S/S)] “S/S” is an abbreviation of “Start/Stop”.
Recording [4K Burst (Wide-angle)] For taking selfies with an angle of view wider than that of [4K Burst] • This setting is only available in Self Shot Mode. (→27) Burst speed: 15 pictures/second Press and hold Recording is performed 4 Press the shutter button to perform recording • When you press the [Fn1] button while recording, you can add a marker. (Up to 40 markers for each recording.) When selecting and saving pictures from a 4K burst file, you can skip to the positions where you added markers.
Recording ● When you perform [Light Composition] or [Sequence Composition], we recommend using a tripod and taking pictures remotely by connecting the camera to a smartphone to prevent camera shake. (→53) Selecting pictures from 4K burst file and saving 1 Select a picture with the [ ] on the playback screen, and press • In the case of recording with [ Burst]), proceed to the step 3.
Recording ■ Marker When selecting and saving pictures from a 4K burst file, you can select pictures easily by skipping between marked positions. White marker: This is manually set during recording or playback. Green marker: This is automatically set by the camera during recording. (Auto Marking function1) Marker operation screen 1 The camera automatically sets markers on scenes in which a face or the movement of a subject is detected. (Up to 10 markers are displayed for each file.
Recording Adjusting the focus after recording ([Post Focus] / [Focus Stacking]) Recording mode: You can record 4K burst pictures while changing the focus point and then select a focus point after recording. This function is best for non-moving subjects. • To record pictures, use a UHS Speed Class 3 card. • We recommend using a tripod to perform [Focus Stacking].
Recording ● If the surrounding temperature is high or [Post Focus] recording is performed ] may be displayed and recording may be stopped halfway continuously, [ through. Wait until the camera cools down. ● During recording, the angle of view will be narrower.
Recording Select the focus range to combine and create a single picture ([Focus Stacking]) 1 Touch [ ] on screen in step 2 of “Select the focus point and save the picture ([Post Focus])” (→34) 2 Choose a stacking method and touch it [Auto Merging] Automatically select photos suitable for stacking and combine them into one picture. • Choose by giving preference to near-focus pictures. • Perform the focus stacking and save the picture.
Recording Recording Motion Picture/4K Motion Picture Recording mode: You can record full high-definition quality images that comply with the AVCHD standard, as well as motion pictures or 4K motion pictures recorded in MP4. 1 Press the motion picture button to start recording Elapsed recording time Remaining recording time Recording (lights up in red) • Recording of motion picture appropriate for each motion picture mode is possible. • Immediately release the motion picture button after pressing it.
Recording ■ Setting the format, picture size and recording frame rate → [Motion Picture] → [Rec Format] Settings: [AVCHD] / [MP4] → [Motion Picture] → [Rec Quality] When [AVCHD] is selected: [FHD/28M/50p]1 / [FHD/17M/50i] / [FHD/24M/25p] ● [AVCHD] motion pictures: Recording stops when the continuous recording time exceeds 29 minutes and 59 seconds. Files are split into smaller motion picture files for recording when the file size exceeds 4 GB.
Playback Viewing your pictures 1 Press [ 2 Press ] (Playback) button to select a picture to be displayed • When you press and hold , the pictures are displayed one after another. ■ Ending Playback Press [ ] (Playback) button again or press the shutter button halfway. ● By holding down [ ] (Playback) button while the camera is off, you can turn the camera on in playback mode. ● When [Lens Retraction] is set to [ON], the lens barrel is retracted after approx.
Menu Menu list • You can display an explanation on the menu by pressing the [DISP.] button while you select a menu item or setting. (→25) Menus to be displayed in each recording mode [Intelligent Auto] [Intelligent Auto Mode] [iHandheld Night Shot] [iHDR] [High Speed Video] [4K Live Cropping] [Creative Video] [Exposure Mode] [Custom Mode] You can select your preferred custom setting from [Set1], [Set2], and [Set3].
Menu [Rec] [Aspect Ratio] [i.Dynamic] [Digital Zoom] [Picture Size] [i.Resolution] [Burst Rate] [Quality] [Flash Adjust.] [4K PHOTO] [AFS/AFF/AFC] [Red-Eye Removal] [Self Timer] [Sensitivity] [ISO Auto Upper Limit (Photo)] [Time Lapse Shot] [White Balance] [AF Mode] [Min. Shtr Speed] [Stop Motion Animation] [Silent Mode] [Photo Style] [Diffraction Compensation] [Filter Settings] [Stabilizer] [Bracket] [Metering Mode] [i.
Menu [Custom] [Exposure] [Operation] [Lens / Others] [ISO Increments] [Fn Button Set] [Lens Position Resume] [Extended ISO] [Exposure Comp. Disp. Setting] [Lens Retraction] [Exposure Comp. Reset] [Focus / Release Shutter] [Ring/Dial Set] [Operation Lock Setting] [Touch Settings] [AF/AE Lock] [Dial Guide] [AF/AE Lock Hold] [Zoom lever] [Shutter AF] [Zoom Compose Assist] [Self Timer Auto Off] [Self Shot] [Face Recog.
Menu [Setup] [Online Manual] [Economy] [Version Disp.] [Cust.Set Mem.] [Monitor Display Speed] [Folder / File Settings] [Clock Set] [LVF Display Speed] [No.Reset] [World Time] [Monitor Display]/ [Viewfinder] [Reset] [Travel Date] [Wi-Fi] [Bluetooth] [Wireless Connection Lamp] [Beep] [Monitor Luminance] [Eye Sensor] [USB Mode] [TV Connection] [Reset Network Settings] [Level Gauge Adjust.] [Demo Mode] [Format] [Language] [My Menu] [My Menu Setting] You can register frequently used menus.
Menu [Light Composition] Select multiple frames from 4K burst files that you wish to combine. Parts of the image that are brighter than the preceding frame will be superimposed on the preceding frame to combine the frames into one picture.
Menu [Sequence Composition] Select multiple frames from a 4K burst file to create a sequence composition of a moving subject into one picture. → [Playback] → [Sequence Composition] to select the 4K burst files and press [MENU/SET] 1 Use 2 Select frames to combine Select the frames so that the moving subject will not overlap on the preceding or subsequent frames. (The sequence composition may not be created properly if the subject overlaps.
Menu [Beauty Retouch] Apply aesthetic and makeup effects to faces in your pictures. → [Playback] → [Beauty Retouch] to select a still picture and press [MENU/SET] 1 Use Press to select the face of the person 2 to edit, and press [MENU/SET] • Only a person with an arrow can be selected. • If only one person is detected, press [MENU/SET].
Wi-Fi/Bluetooth What you can do with the Wi-Fi®/Bluetooth® function Operating the camera by connecting it to a smartphone • Operating the shutter button of the camera using a smartphone (remote recording) (→53) • Playing back or saving images stored on the camera, or uploading them on social media sites (→54) • Combining motion pictures recorded with Snap Movie according to your preference on a smartphone Expanding the scope of applications by connecting the camera to a smartphone compatible with Bluetooth
Wi-Fi/Bluetooth ■ Lighting of the WIRELESS connection lamp (Blue) Lit: When the Wi-Fi/Bluetooth function is ON or connected Blinking: When sending picture data by operating the camera • In [Wireless Connection Lamp] in the [Setup] menu, you can set the lamp so that it will not light/flash. ■ [Wi-Fi] button In this Operating Instructions, a function button to which [Wi-Fi] is assigned is referred to as the [Wi-Fi] button.
Wi-Fi/Bluetooth Operating the camera by connecting it to a smartphone Installing the smartphone app “Panasonic Image App” • Supported OS Android™: Android 4.4 or later (Android 5.0 or higher is required to use the Bluetooth function) iOS: iOS 9.
Wi-Fi/Bluetooth Connecting the camera to a smartphone compatible with Bluetooth Low Energy You can connect the camera to a smartphone via a Bluetooth connection. • Supported smartphones Android: Android 5.0 or higher equipped with Bluetooth 4.0 or higher (excluding those that do not support Bluetooth low energy) iOS: iOS 9.3 or higher (excluding the iPad 2) ■ First-time connection You need to set up pairing (connection) for the first time only.
Wi-Fi/Bluetooth If you are using an Android device, follow the steps up to here to complete the setup. Proceed to the steps below only if you are using an iOS device. • If [Wi-Fi Password] (→51) is set to [OFF] on the camera, select [Wi-Fi Setup]. (At the time of purchase, [Wi-Fi Password] is set to [OFF]) • If [Wi-Fi Password] is set to [ON] on the camera, you need to install the profile. Install the profile • If the smartphone is locked with a passcode, enter the passcode to unlock the smartphone.
Wi-Fi/Bluetooth Connecting the camera to a smartphone that does not support for Bluetooth Low Energy You can easily establish a Wi-Fi connection on this unit without entering a password on your smartphone. (On the camera) → [Setup] → [Wi-Fi] → [Wi-Fi Function] → [New Connection] → [Remote Shooting & View] • The information required for directly connecting your smartphone to this unit (SSID ( )) is displayed.
Wi-Fi/Bluetooth Closing the Wi-Fi connection 1 Set the camera to Recording Mode • Press the shutter button halfway to return to recording mode.
Wi-Fi/Bluetooth 5 Operate the smartphone Select [ ] Select [Remote operation] • The camera automatically turns on, allowing it to make a Wi-Fi connection automatically. (iOS devices) Depending on the connection status of the smartphone, you may need to change the connected device on the Wi-Fi setup screen. Follow the on-screen message on the smartphone to change the setting.
Wi-Fi/Bluetooth Using the smartphone to operate the shutter button via a Bluetooth connection only Wireless connectivity required: Bluetooth 1 Make a Bluetooth connection to the smartphone (→49) 2 Operate the smartphone Select [ ] Select [Shutter Remote Control] Take pictures • Read the [Help] in the “Image App” menu for further details on how to operate [Shutter Remote Control] of “Image App”.
Others Downloading software Download and install software to edit and play back images with a PC. ● To download the software, your PC must be connected to the Internet. ● It may take time to download the software in some communication environments. PHOTOfunSTUDIO 10.0 AE (Windows® 10 / 8.1 / 7) You can capture still pictures or motion pictures to your PC, or organise captured pictures by categorising by recording date, model name of the digital camera used to record, etc.
Others List of monitor/viewfinder displays • The following images are examples of when the display screen is set to [ (monitor style) in the monitor.
Others [Quality] 240fps 200fps [High Speed Video] 120fps 100fps AFS [AFS/AFF/AFC]/MF [AF Mode] [Pull Focus] ([Snap Movie]) [Face Recog.] AFL AF Lock Burst Name2 Travel elapsed days3 Age in years/months2 Location3 Current date/time3 Travel destination setting3: Exposure metre Zoom (→21) [4K PHOTO] (→29) [Post Focus] (→33) [Self Timer] Battery indicator Macro recording (→23) [Level Shot] [Stabilizer] Jitter alert Focus (Lights green.) (→20)/ Recording state (Lights up in red.
Others [Dial Guide] AWBc 98 r20 RXXmXXs White Balance White Balance Bracket White Balance Fine Adjustment Colouring Number of recordable pictures Maximum number of pictures that can be taken continuously Available recording time1 Touch tab Touch zoom Touch Shutter Touch AF [Touch AE] [Peaking] Function buttons (→24) Colouring Defocus control function Brightness (exposure) Type of defocus ([Miniature Effect]) [One Point Color] [Sunshine] Picture effect (Filter) adjustment display Picture effects ON or
Others Q&A Troubleshooting • Performing [Reset] in the [Setup] menu may resolve the issue. • Further information is provided in the “Operating Instructions for advanced features (PDF format)”. Check it together with the information in this section. The charging lamp blinks. • Charging is being performed in a place with extremely high or low temperature.
Others No flash emitted. • The flash becomes unavailable in the following cases. – Flash set to [ ] (Forced Flash Off). • Set [Shutter Type] to [AUTO] or [MSHTR]. (→40) • Set [Silent Mode] to [OFF]. (→40) Striping or flicker may appear under lighting such as fluorescent lighting and LED lighting fixture. • This is a characteristic of MOS sensors which serve as the camera’s pickup sensors. This is not a malfunction.
Others Specifications Digital Camera: Information for your safety Power Source DC 8.4 V (8.4 V Power Consumption 1.8 W (When recording with monitor) 2.8 W (When recording with viewfinder) 1.5 W (When playing back with monitor) 1.6 W (When playing back with viewfinder) Camera effective pixels ) 20,300,000 pixels Image sensor 1/2.3″ MOS sensor, total pixel number 21,100,000 pixels Primary colour filter Lens Optical 30x zoom f=4.3 mm to 129 mm (35 mm film camera equivalent: 24 mm to 720 mm) Max.
Others Shutter speed Still picture: 30 seconds to 1/2000th of a second (When the mechanical shutter is used and [Artistic Nightscape] is selected as the Scene Guide Mode), 4 seconds to 1/2000th of a second (When the mechanical shutter is used, in cases other than the above), 1 second to 1/16000th of a second (When the electronic shutter is used) Motion picture: 1/2 second to 1/16000th of a second (When [Exposure Mode] is set to [M] in Creative Video Mode and [MF] is selected), 1/25th of a second to 1/16000
Others Microphones Stereo Speaker Monaural Recording media SD Memory Card/SDHC Memory Card/ SDXC Memory Card UHS- UHS Speed Class 3 Recording file format Still picture RAW/JPEG (based on Design rule for Camera File system, based on Exif 2.31 standard) 4K Photo MP4 Motion picture AVCHD Progressive/AVCHD/MP4 Audio compression AVCHD: Dolby Audio™ (2 ch) format MP4: AAC (2 ch) Interface [HDMI] Micro HDMI Type D [USB/CHARGE] USB 2.0 (High Speed)/USB 2.
Others ■ Wireless transmitter Wireless LAN Compliance standard IEEE 802.11b/g/n (standard wireless LAN protocol) Frequency range used 2412 MHz to 2462 MHz (1 to 11 ch) (central frequency) Encryption method Wi-Fi compliant WPA™/WPA2™ Access method Infrastructure mode Bluetooth function Compliance standard Bluetooth Ver. 4.
Others Reading the Operating Instructions (PDF format) More detailed operating instructions are available in “Operating Instructions for advanced features (PDF format)”. To read it, download it from the website. DC-TZ95 https://panasonic.jp/support/dsc/oi/ index.html?model=DC-TZ95&dest=EB DC-TZ96 https://panasonic.jp/support/dsc/oi/ index.html?model=DC-TZ96&dest=EG DC-TZ97 https://panasonic.jp/support/dsc/oi/ index.html?model=DC-TZ97&dest=EB • Click the desired language.
● SDXC Logo is a trademark of SD-3C, LLC. ● The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. ● HDAVI Control™ is a trademark of Panasonic Corporation. ● “AVCHD”, “AVCHD Progressive” and the “AVCHD Progressive” logo are trademarks of Panasonic Corporation and Sony Corporation. ● Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.
This product incorporates the following software: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation, (3) the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0), (4) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL V2.1), and/or (5) open source software other than the software licensed under the GPL V2.0 and/or LGPL V2.1.
EU Manufactured by: Panasonic Corporation Kadoma, Osaka, Japan Importer for Europe: Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Germany Web Site: http://www.panasonic.
