User manual

4. Image Recording
92
This sets the way recording to the card slots 1 and 2 is performed.
¨ [ ] ¨ [ ] ¨ Select [Double Card Slot Function]
[Double Card Slot Function]
[Recording
Method]
[Relay Rec]
Selects the priority of card slots for recording.
[Destination Card Slot]: [ ]/[ ]
Relays recording to the card in the other card
slot after the first card runs out of free space.
[Backup
Rec]
Records the same images to both cards
simultaneously.
[Allocation
Rec]
Allows you to specify the card slot to be used for
recording for different image formats.
[JPEG/HLG Photo Destn.]/[RAW Destination]/
[6K/4K Photo Destination]/[Video
Destination]
Notes about relay recording
0 The following video cannot be continued to be recorded on another card:
– [AVCHD] videos
– [Loop Recording (video)]
Notes about Backup Recording
0 We recommend using cards with the same Speed Class rating and capacity.
If the card Speed Class or capacity is insufficient when video recording,
recording to both cards stops.
0 Backup recording is not available with the following video. They can only be
recorded on a single card:
– [AVCHD] videos
– [Loop Recording (video)]
0 When using the following combinations of cards, recording videos, 6K/4K
photos, and recording with [Post-Focus] are not available:
– SD memory card or SDHC memory card, and SDXC memory card
0 You can register [Destination Card Slot] in an Fn button and switch the
recording destination slot:
[] ¨ [ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Destination
Card Slot] (l 367)