User manual

18. Materials
555

Wi-Fi
0 The wireless access point information set on the camera is wrong.
Check the authentication type and encryption key. (l 511)
0 Radio waves from other devices may block the connection to a wireless access
point.
Check the status of other devices that are connected to the wireless access point as
well as the status of other wireless devices.
0 Radio waves from the wireless access point are getting weak.
Perform the connection closer to the wireless access point.
0 Depending on the wireless access point, connection may be automatically
disconnected after specific time has passed.
Reconnect the connection again.
0 Change the access point to connect to in the smartphone Wi-Fi settings to the
camera.

Others
0 Images that do not comply with the DCF standard cannot be deleted.
Back up any necessary data before formatting the card. (l 50)
0 Images that do not comply with the DCF standard cannot be edited.
0 The maximum number of folder numbers has been reached, so new folders cannot
be created.
Back up any necessary data before formatting the card. (l 50)
After formatting, execute [File Number Reset] in the [Setup] ([Card/File]) menu to
reset the folder number to 100. (l 95)
[Failed to connect wireless access point]/[Connection failed]/[No
destination found]
[Connection failed. Please retry in a few minutes.]/[Network
disconnected. Transfer stopped.]
[Connection failed]
[Some pictures cannot be deleted]/[This picture cannot be deleted]
[Cannot be set on this picture]
[A folder cannot be created]