User manual
Table Of Contents
- About Operating Instructions
- Chapters
- Contents
- Contents by Function
- 1. Introduction
- 2. Getting Started
- 3. Basic Operations
- 4. Image Recording
- 5. Focus/Zoom
- 6. Drive/Shutter/Image Stabiliser
- Selecting the Drive Mode
- Taking Burst Pictures
- 6K/4K Photo Recording
- Selecting Pictures from a 6K/4K Burst File
- Recording with Time Lapse Shot
- Recording with Stop Motion Animation
- Time Lapse Shot/Stop Motion Animation Videos
- Recording Using the Self-timer
- Bracket Recording
- Post-Focus Recording
- [Silent Mode]
- [Shutter Type]
- Image Stabiliser
- 7. Metering/Exposure/ISO Sensitivity
- 8. White Balance/Image Quality
- 9. Flash
- 10. Recording Videos
- 11. Special Video Recording
- 12. Connections with External Devices (Video)
- 13. Playing Back and Editing of Images
- 14. Camera Customisation
- 15. Menu Guide
- 16. Wi-Fi/Bluetooth
- 17. Connecting to Other Devices
- 18. Materials
- Using Optional Accessories
- Monitor/Viewfinder Displays
- Message Displays
- Troubleshooting
- Cautions for Use
- Number of Pictures That Can Be Taken and Available Recording Time with the Battery
- Number of Still Images That Can Be Taken and Video Recording Time with Cards
- List of Default Settings/Custom Saving/Settings Available for Copying
- List of Functions That Can Be Set in Each Recording Mode
- Specifications
- Index
- Trademarks and Licences
16. Wi-Fi/Bluetooth
517
This configures the settings required for the Wi-Fi function.
The settings cannot be changed when connected to Wi-Fi.
Displaying the [Wi-Fi Setup] menu.
≥ ¨ [ ] ¨ [ ] ¨ [Wi-Fi] ¨ [Wi-Fi Setup]
[Wi-Fi Setup] Menu
[Priority of Remote
Device]
This sets either the camera or the smartphone as the
priority control device to be used during remote
recording. (l 480)
[Wi-Fi Password]
You can use a password to connect for enhanced
security. (l 475)
[LUMIX CLUB]
This acquires or changes the “LUMIX CLUB” login ID.
(
l 519)
[PC Connection]
You can set the workgroup.
To send images to a PC, you need to connect to the
same workgroup as the destination PC.
(The default setting is “WORKGROUP”.)
0 To change the workgroup name, press or
and enter the new workgroup name.
For information on how to enter characters, refer to
page 464.
0 To return to the default settings, press [DISP.].
[Device Name]
You can change the name (SSID) of the camera.
0 To change the SSID name, press [DISP.] and enter
the new SSID name.
For information on how to enter characters, refer to
page 464.
0 A maximum of 32 characters can be entered.