User manual

16. Wi-Fi/Bluetooth
488
[Location Logging]
The smartphone sends its location information to the camera via Bluetooth,
and the camera performs recording while writing the acquired location
information.
Getting started:
0 Enable the GPS function on the smartphone.
0 Connect the camera to a smartphone by Bluetooth. (l 469)
1
Enable [Location Logging] on
the camera.
≥ ¨ [ ] ¨ [ ] ¨ [Bluetooth]
¨ [Location Logging] ¨ [ON]
0
The camera will enter a mode where
location information can be recorded and
[ ] is displayed in the recording screen of the camera.
2
Record images with the camera.
0 Location information will be written to the recorded images.
0 When [ ] on the recording screen appears translucent, location
information cannot be acquired, therefore data cannot be written.
Smartphone GPS positioning may not be possible if the smartphone is within
a building, a bag, or similar. Move the smartphone to a position affording a
wide view of the sky to improve positioning performance.
In addition, refer to the operating instructions of your smartphone.
0 Images with location information are indicated with [ ].
0 Be sure to pay special attention to the privacy, the likeness rights, etc. of the
subject when you use this function. Use at your own risk.
0 The smartphone drains its battery faster while acquiring location information.
0 Location information is not written to AVCHD videos.
Bluetooth
GPS
GPS
GPS