User manual
Table Of Contents
- About Operating Instructions
- Chapters
- Contents
- Contents by Function
- 1. Introduction
- 2. Getting Started
- 3. Basic Operations
- 4. Image Recording
- 5. Focus/Zoom
- 6. Drive/Shutter/Image Stabiliser
- Selecting the Drive Mode
- Taking Burst Pictures
- 6K/4K Photo Recording
- Selecting Pictures from a 6K/4K Burst File
- Recording with Time Lapse Shot
- Recording with Stop Motion Animation
- Time Lapse Shot/Stop Motion Animation Videos
- Recording Using the Self-timer
- Bracket Recording
- Post-Focus Recording
- [Silent Mode]
- [Shutter Type]
- Image Stabiliser
- 7. Metering/Exposure/ISO Sensitivity
- 8. White Balance/Image Quality
- 9. Flash
- 10. Recording Videos
- 11. Special Video Recording
- 12. Connections with External Devices (Video)
- 13. Playing Back and Editing of Images
- 14. Camera Customisation
- 15. Menu Guide
- 16. Wi-Fi/Bluetooth
- 17. Connecting to Other Devices
- 18. Materials
- Using Optional Accessories
- Monitor/Viewfinder Displays
- Message Displays
- Troubleshooting
- Cautions for Use
- Number of Pictures That Can Be Taken and Available Recording Time with the Battery
- Number of Still Images That Can Be Taken and Video Recording Time with Cards
- List of Default Settings/Custom Saving/Settings Available for Copying
- List of Functions That Can Be Set in Each Recording Mode
- Specifications
- Index
- Trademarks and Licences
16. Wi-Fi/Bluetooth
481
0 The default setting is [Camera].
[Shutter Remote Control]
You can use the smartphone as a remote control for the shutter.
Getting started:
0 Connect the camera to a smartphone by Bluetooth. (l 469)
0 On the smartphone, start up “LUMIX Sync ”.
1
Select [ ] ([Shutter Remote Control]) in the home
screen.
2
Start recording.
[Camera]
Operation is possible on both the camera and the
smartphone.
0 The camera’s dial settings, etc. cannot be changed
with the smartphone.
[Smartphone]
Operation is possible only on the smartphone.
0 The camera’s dial settings, etc. can be changed with
the smartphone.
0 To end remote recording, press any of the buttons
on the camera to turn on the screen, and select
[End].
0 The setting of this function cannot be changed while the connection is active.
Starts/ends the video recording
Takes a picture
0 Bulb recording (l 482)
Bluetooth
LOCK