User manual
Table Of Contents
- About Operating Instructions
- Chapters
- Contents
- Contents by Function
- 1. Introduction
- 2. Getting Started
- 3. Basic Operations
- 4. Image Recording
- 5. Focus/Zoom
- 6. Drive/Shutter/Image Stabiliser
- Selecting the Drive Mode
- Taking Burst Pictures
- 6K/4K Photo Recording
- Selecting Pictures from a 6K/4K Burst File
- Recording with Time Lapse Shot
- Recording with Stop Motion Animation
- Time Lapse Shot/Stop Motion Animation Videos
- Recording Using the Self-timer
- Bracket Recording
- Post-Focus Recording
- [Silent Mode]
- [Shutter Type]
- Image Stabiliser
- 7. Metering/Exposure/ISO Sensitivity
- 8. White Balance/Image Quality
- 9. Flash
- 10. Recording Videos
- 11. Special Video Recording
- 12. Connections with External Devices (Video)
- 13. Playing Back and Editing of Images
- 14. Camera Customisation
- 15. Menu Guide
- 16. Wi-Fi/Bluetooth
- 17. Connecting to Other Devices
- 18. Materials
- Using Optional Accessories
- Monitor/Viewfinder Displays
- Message Displays
- Troubleshooting
- Cautions for Use
- Number of Pictures That Can Be Taken and Available Recording Time with the Battery
- Number of Still Images That Can Be Taken and Video Recording Time with Cards
- List of Default Settings/Custom Saving/Settings Available for Copying
- List of Functions That Can Be Set in Each Recording Mode
- Specifications
- Index
- Trademarks and Licences
16. Wi-Fi/Bluetooth
476
Manually entering a password to connect
1
Display the screen in Step
2
on page 475.
2
In the setting menu of the smartphone,
turn the Wi-Fi function ON.
3
On the Wi-Fi setup screen, select the
SSID B displayed on the camera.
4
(At the first connection)
Enter the password B displayed on the
camera.
5
On the smartphone, start up “LUMIX
Sync ”.
0 (iOS devices) If the Wi-Fi connection fails, follow the message displayed to
allow connection to the camera. If you still cannot connect, select the SSID of
the camera on the Wi-Fi setup screen of the smartphone to connect. If the
SSID is not displayed, turn off and on the camera, then perform the Wi-Fi
connection settings again.
Wi-Fi
Wi-Fi
XXXXXXXX
i
i