User manual

15. Menu Guide
454
[Setup] menu ¨ [Others]
[Clock Set]
Sets the date and time.
0 For details, refer to page 56.
[Time Zone]
Sets the time zone.
Press 21 to select the time zone and then press or
to confirm.
A Current time
B Time difference
from GMT
(Greenwich
Mean Time)
0 If you are using Daylight Savings [ ], press 3. (The
time will move forward by 1 hour.)
To return to the normal time, press 3 again.
[System Frequency]
[59.94Hz (NTSC)]/`[50.00Hz (PAL)]/[24.00Hz (CINEMA)]
This changes the system frequency of videos that are
recorded and played back with the camera.
0 For details, refer to page 253.
[Pixel Refresh]
This optimises the image sensor and image processing.
0 The image sensor and image processing are optimised
when the camera is purchased. Use this function when
bright spots that do not exist in the subject get recorded.
0 Turn the camera off and on after the pixels are corrected.
[Sensor Cleaning]
Dust reduction to blow off the debris and dust that have
affixed to the front of the image sensor is performed.
0 The dust reduction function will operate automatically
when you set the camera on/off switch to [ON], but you
can use this function when the dust is particularly
noticeable.