User manual

2. Getting Started
43
Using the Camera While Supplying It with Power
(Supplying Power/Charging)
When charging with both the camera body and the supplied AC adaptor
(l 41), you can charge while the camera is being supplied with power by
turning the camera on. You can record while charging.
This is also possible by connecting devices that support USB PD (USB
Power Delivery) to the camera.
0
Insert the battery into the camera.
0 Connect using the supplied USB connection cable (C–C).
0 Use a device (mobile battery, etc.) with an output of 9 V/3 A (27 W or more) that
supports USB PD.
0 When the camera is on, charging will take longer than when the camera is off.
A AC adaptor B Devices that support USB PD (mobile
battery, etc.)
0 Even when connecting with devices that support USB PD, you may not be
able to charge while using the camera.
0 If connecting with devices (PC, etc.) that do not support USB PD and turning
the camera on, then this will supply power only.
0 Turn off the camera before connecting or disconnecting the power plug.
0 Remaining charge in the battery may decrease depending on usage
conditions. When the battery level is depleted, the camera will turn off.
0 Depending on the power supply capabilities of the connected device, it may
not be possible to supply power.
0 USB power supply can be turned off:
[] ¨ [ ] ¨ [USB] ¨ [USB Power Supply] (l 449)