User manual

15. Menu Guide
427
[Custom] menu ¨ [Operation]
[WB/ISO/Expo.
Button]
[WHILE PRESSING]/[AFTER PRESSING1]/`[AFTER
PRESSING2]
This sets the operation to be performed when [WB] (White
balance), [ISO] (ISO sensitivity) or [ ] (Exposure
compensation) is pressed.
[WHILE PRESSING]: Allows you to change the setting
while pressing and holding the button.
Release the button to confirm the settings value, and to
return to the recording screen.
[AFTER PRESSING1]: Press the button to change settings.
Press the button again to confirm the settings value, and to
return to the recording screen.
[AFTER PRESSING2]: Press the button to change settings.
Each press of the button switches the settings value.
(Except that of exposure compensation) To confirm your
selection and return to the recording screen, press the
shutter button halfway.
[ISO Displayed
Setting]
[Front/Rear Dials] `[ / ] / [ / ] /
[OFF/ ] / [ / ] / [ /OFF]
This sets the operations of the dials in the setting screen for
ISO sensitivity.
Assigning [ ] lets you change [ISO Auto Upper Limit
Setting].
[Exposure Comp.
Disp. Setting]
[Cursor Buttons (Up/
Down)]
[]/`[OFF]
This sets the operations of the 34 buttons in the exposure
compensation screen.
Assigning [ ] lets you set exposure bracketing.
[Front/Rear Dials] `[ / ] / [ / ] / [OFF/ ] /
[ / ] / [ /OFF]
This sets the operations of the dials in the exposure
compensation screen.
Assigning [ ] lets you adjust flash output.