User manual

12. Connections with External Devices (Video)
335
Settings for Down-Converting
Make settings for the down-conversion of resolution and frame rate for
HDMI output in the [ ] mode.
¨ [ ] ¨ [ ] ¨ [HDMI Rec Output] ¨ Select [Down Convert]

Image Quality When Outputting via HDMI
Output is with the resolution and frame rate according to the combinations
of the [Rec Quality] and [Down Convert] settings.
0 When [Down Convert] is set to [AUTO], the output matches the
connected device.
0 There is no HDMI output when setting combinations result in a [—] in the
below tables.
HDMI Output Image Quality (Resolution/
Frame Rate)
[AUTO] Outputs by down-converting to match the connected device.
[4K/30p]
([4K/25p])
Outputs by down-converting resolution to 4K and frame rate to either
29.97p or 25.00p.
[1080p]
Down-converts resolution to FHD (1080), and outputs as
progressive.
[1080i] Down-converts resolution to FHD (1080), and outputs as interlaced.
[OFF]
Outputs at the resolution and recording frame rate of the [Rec
Quality].
0 The items you can select depend on the [System Frequency] setting.
0 6K, 5.9K, and 5.4K videos are output with a 4K or FHD resolution. (l 335)
Output is not possible during recording.
0 Anamorphic (4:3) video is output with a 4K or FHD resolution. (l 335)
0 When set to a recording quality for high frame rate video, the frame rate is
down-converted for output. (l 335)
0 If down-converting, AF may take longer than usual for focusing, and the
performance of continuous focus tracking may deteriorate.