User manual
Table Of Contents
- About Operating Instructions
- Chapters
- Contents
- Contents by Function
- 1. Introduction
- 2. Getting Started
- 3. Basic Operations
- 4. Image Recording
- 5. Focus/Zoom
- 6. Drive/Shutter/Image Stabiliser
- Selecting the Drive Mode
- Taking Burst Pictures
- 6K/4K Photo Recording
- Selecting Pictures from a 6K/4K Burst File
- Recording with Time Lapse Shot
- Recording with Stop Motion Animation
- Time Lapse Shot/Stop Motion Animation Videos
- Recording Using the Self-timer
- Bracket Recording
- Post-Focus Recording
- [Silent Mode]
- [Shutter Type]
- Image Stabiliser
- 7. Metering/Exposure/ISO Sensitivity
- 8. White Balance/Image Quality
- 9. Flash
- 10. Recording Videos
- 11. Special Video Recording
- 12. Connections with External Devices (Video)
- 13. Playing Back and Editing of Images
- 14. Camera Customisation
- 15. Menu Guide
- 16. Wi-Fi/Bluetooth
- 17. Connecting to Other Devices
- 18. Materials
- Using Optional Accessories
- Monitor/Viewfinder Displays
- Message Displays
- Troubleshooting
- Cautions for Use
- Number of Pictures That Can Be Taken and Available Recording Time with the Battery
- Number of Still Images That Can Be Taken and Video Recording Time with Cards
- List of Default Settings/Custom Saving/Settings Available for Copying
- List of Functions That Can Be Set in Each Recording Mode
- Specifications
- Index
- Trademarks and Licences
10. Recording Videos
273
Synchronise the Time Code of the Camera with That
of the External Device (TC IN)
The initial time code value of the camera is synchronised according to the
time code signal (LTC signal) of the external device.
1
Prepare for time code synchronising. (l 270)
2
Set [TC Synchronization] to
[TC IN].
≥ ¨ [ ] ¨ [ ] ¨ [Time Code]
¨ [External TC Setting] ¨ [TC
Synchronization]
¨ [TC IN]
3
Operate the external device to
output the time code signal.
≥Set the time code count method of the external device to free run,
and output the signal.
≥When synchronised with the time code of an external device, this
camera is in a slave state, and the [ ] of the time code shown
on the screen switches to [ ].
0 In advance, change the [System Frequency] (l 253), [Rec Quality] (l 255),
and [Time Code Mode] (l 269) to match the external device.
0 When multiple units of this camera
are synchronised, the time code and
exposure timings are synchronised
so you can match the timings for
starting exposure between cameras.
0 The exposure timing can only be
synchronised the first time after [TC
Synchronization] is set to [TC IN].