User manual
Table Of Contents
- About Operating Instructions
- Chapters
- Contents
- Contents by Function
- 1. Introduction
- 2. Getting Started
- 3. Basic Operations
- 4. Image Recording
- 5. Focus/Zoom
- 6. Drive/Shutter/Image Stabiliser
- Selecting the Drive Mode
- Taking Burst Pictures
- 6K/4K Photo Recording
- Selecting Pictures from a 6K/4K Burst File
- Recording with Time Lapse Shot
- Recording with Stop Motion Animation
- Time Lapse Shot/Stop Motion Animation Videos
- Recording Using the Self-timer
- Bracket Recording
- Post-Focus Recording
- [Silent Mode]
- [Shutter Type]
- Image Stabiliser
- 7. Metering/Exposure/ISO Sensitivity
- 8. White Balance/Image Quality
- 9. Flash
- 10. Recording Videos
- 11. Special Video Recording
- 12. Connections with External Devices (Video)
- 13. Playing Back and Editing of Images
- 14. Camera Customisation
- 15. Menu Guide
- 16. Wi-Fi/Bluetooth
- 17. Connecting to Other Devices
- 18. Materials
- Using Optional Accessories
- Monitor/Viewfinder Displays
- Message Displays
- Troubleshooting
- Cautions for Use
- Number of Pictures That Can Be Taken and Available Recording Time with the Battery
- Number of Still Images That Can Be Taken and Video Recording Time with Cards
- List of Default Settings/Custom Saving/Settings Available for Copying
- List of Functions That Can Be Set in Each Recording Mode
- Specifications
- Index
- Trademarks and Licences
10. Recording Videos
268
When [Rec. File Format] is set to [AVCHD] or [MOV], the time code is
automatically recorded during video recording. If [MP4], the time code is
not recorded.
Setting the Time Code
Sets the recording, display, and output of the time code.
1
Set [Rec. File Format] to
[AVCHD] or [MOV].
≥ ¨ [ ] ¨ [ ] ¨ [Rec. File
Format]
¨ [AVCHD]/[MOV]
2
Select [Time Code].
≥ ¨ [ ] ¨ [ ] ¨ [Time Code]
Time Code
[Time Code
Display]
Displays the time code on the recording screen/playback screen.
[Count Up]
[REC RUN]
Counts the time code only when recording
videos.
[FREE RUN]
Counts the time code also when video recording
is stopped and when the camera is turned off.
0 When the following function is being used, [Count Up] is fixed to
[REC RUN]:
– [Variable Frame Rate]