User manual

7. Metering/Exposure/ISO Sensitivity
194

Available Shutter Speeds (Sec.)

Manual Exposure Assist
When ISO sensitivity is set to other than [AUTO], Manual Exposure Assist
(example: ) will be displayed on the recording screen.
You can check the difference between the current exposure value and the
correct exposure (n0) measured by the camera.
0
Use Manual Exposure Assist as a guide.
We recommend checking the images on the playback screen when recording.
[MECH.] [B] (Bulb, max. approx. 30 minutes), 60 to 1/8000
[EFC] [B] (Bulb, max. approx. 30 minutes), 60 to 1/2000
[ELEC.] [B] (Bulb, max. approx. 60 seconds), 60 to 1/8000
0 The effects of the set aperture value and shutter speed will not be visible on
the recording screen.
To check the effects on the recording screen, use [Preview]. (l 196)
You can set the preview mode to operate constantly in [M] mode.
[] ¨ [ ] ¨ [Constant Preview] (l 431)
0 The brightness of the recording screen and of actual recorded images may
differ.
Check the images on the playback screen.
0 When using a lens with an aperture ring, set the position of the aperture ring to
other than [A] to use the aperture value of the lens.
0 Shutter speeds faster than 1/320 of a second are not available when you fire
the flash. (l 233)
0 You can customise dial operations:
[] ¨ [ ] ¨ [Dial Set.] ¨ [Assign Dial (F/SS)]/[Rotation (F/SS)] (l 428)
0 The recording screen can display an exposure meter indicating the
relationship between aperture value and shutter speed:
[] ¨ [ ] ¨ [Expo.Meter] (l 436)