User manual
Table Of Contents
- About Operating Instructions
- Chapters
- Contents
- Contents by Function
- 1. Introduction
- 2. Getting Started
- 3. Basic Operations
- 4. Image Recording
- 5. Focus/Zoom
- 6. Drive/Shutter/Image Stabiliser
- Selecting the Drive Mode
- Taking Burst Pictures
- 6K/4K Photo Recording
- Selecting Pictures from a 6K/4K Burst File
- Recording with Time Lapse Shot
- Recording with Stop Motion Animation
- Time Lapse Shot/Stop Motion Animation Videos
- Recording Using the Self-timer
- Bracket Recording
- Post-Focus Recording
- [Silent Mode]
- [Shutter Type]
- Image Stabiliser
- 7. Metering/Exposure/ISO Sensitivity
- 8. White Balance/Image Quality
- 9. Flash
- 10. Recording Videos
- 11. Special Video Recording
- 12. Connections with External Devices (Video)
- 13. Playing Back and Editing of Images
- 14. Camera Customisation
- 15. Menu Guide
- 16. Wi-Fi/Bluetooth
- 17. Connecting to Other Devices
- 18. Materials
- Using Optional Accessories
- Monitor/Viewfinder Displays
- Message Displays
- Troubleshooting
- Cautions for Use
- Number of Pictures That Can Be Taken and Available Recording Time with the Battery
- Number of Still Images That Can Be Taken and Video Recording Time with Cards
- List of Default Settings/Custom Saving/Settings Available for Copying
- List of Functions That Can Be Set in Each Recording Mode
- Specifications
- Index
- Trademarks and Licences
7. Metering/Exposure/ISO Sensitivity
186
In [P] mode (Programme AE mode), the camera automatically sets the
shutter speed and aperture value for the brightness of the subject.
You can also use Programme Shift to change combinations of shutter
speed and aperture values while keeping the same exposure.
1
Set the mode dial to [P].
2
Press the shutter button
halfway.
≥This displays the aperture value A
and shutter speed value B on the
recording screen.
0
If the correct exposure is not achieved,
the aperture value and shutter speed
blink red.
3
Start recording.
Programme AE Mode
F4.060