User manual

6. Drive/Shutter/Image Stabiliser
183

[Lens Information]
Register the information for lenses that cannot communicate with the
camera.
Match the in-body image stabiliser with the information of the lens you
register.
The settings on this camera enable you to switch settings to suit full-frame
or Super 35 mm/APS-C lenses. (l 24)
Press 34 to select the lens information to
use and then press or .
0
In the default setting, the lens information for
6 lenses with a focal length of between 24 mm
and 135 mm is registered.
The lens information for up to 12 lenses can be
registered.
Registering, modifying, and deleting lens information
1
Press 34 to select the lens information and then press [DISP.].
0
If lens information that has not been registered is selected, press or
to proceed to Step 3.
2
Press 34 to select [Edit] or [Delete] and then press or .
0
The lens information is deleted when you select [Delete].
0 You cannot delete the lens information for a lens that is being used.
3
Enter the lens Information.
0
The lens information changes if the lens information has already been
registered.
4
(If lens information that has not been registered is selected)
Press [DISP.] to register the lens information.