User manual

6. Drive/Shutter/Image Stabiliser
176
0 The electronic front curtain type reduces blur caused by the shutter because the
amount of vibration from the shutter is small compared to the mechanical shutter
type.
0 The electronic shutter type allows you to record without vibration from the shutter.
0 To reduce shutter-induced blur, you can set the shutter to release a few
seconds after the shutter button is pressed:
[] ¨ [ ] ¨ [Shutter Delay] (l 406)
0 When [ ] is displayed on the screen, recording will be with the electronic
shutter type.
0 When a moving subject is recorded using the electronic shutter, the subject
may appear distorted in the picture.
0 When you record using the electronic shutter under lighting such as
fluorescent or LED lighting, horizontal stripes may be recorded. In such a
case, lowering the shutter speed may reduce the effect of horizontal stripes.
0 When [Silent Mode] is being used, [Shutter Type] is fixed to [ELEC.].
0 When using Super 35 mm/APS-C lenses, the electronic front curtain is not
available.
0 You can register functions to Fn buttons:
[] ¨ [ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Shutter Type]
(l 367)