User manual

6. Drive/Shutter/Image Stabiliser
140

[Pre-Burst Recording] ([6K/4K Burst]/[6K/4K Burst(S/S)])
The camera starts recording approx. 1 second before the shutter button is
pressed fully, so you will not miss a photo opportunity.
¨ [ ] ¨ [ ] ¨ [6K/4K PHOTO] ¨ Select [Pre-Burst Recording]
Settings: [ON]/[OFF]
0
When [Pre-Burst Recording] is being used, [PRE] is displayed on the recording
screen.
0 The AF behaviour and functionality restrictions when using [Pre-Burst Recording]
are the same as for [6K/4K Pre-Burst].
0 Setting ranges become the following with 6K/4K photo recording:
– Shutter speed: 1/30 (1/60 when [4K H 8M] is set) to 1/8000
– [Min. Shutter Speed]: [1/500] to [1/30] ([1/60] when [4K H 8M] is set)
– Exposure compensation: n3EV
0 The file save method differs depending on the type of card.
– SDHC memory card:
A new file will be created to continue recording if the file size exceeds 4 GB.
– SDXC memory card:
Files are not divided for recording.
0 When [6K/4K Pre-Burst] or [Pre-Burst Recording] is set, the battery drains
faster and the camera temperature rises. Set these settings only when
recording.
0 For 6K/4K photo, the menu items below are fixed to the following settings:
– [Shutter Type]: [ELEC.]
– [Picture Quality]: [FINE]
0 With 6K/4K photo recording, the following functions are not available:
–Flash
– [Bracketing]
– Programme Shift
– AF mode ( )
– [MF Assist] ([6K/4K Pre-Burst] only)
0 When you record in an extremely bright location or under lighting such as
fluorescent or LED lighting, the colouring or brightness of the image may
change or horizontal stripes may appear on the screen.
Lowering the shutter speed may reduce the effect of horizontal stripes.