Basic Operating Instructions

3. Basic Operations
DVQX1944 (ENG)
49

Operation Lock Lever
Aligning the operation lock lever with the
[LOCK] position disables the following
operation parts.
The operation parts to disable can be set in
[Lock Lever Setting] of the [Custom]
([Operation]) menu.
Setting the Viewfinder

Adjusting the Viewfinder
Dioptre
Rotate the dioptre adjustment dial
while looking through the
viewfinder.
0 Adjust until you can clearly see the text on the viewfinder.
0 Touch the screen with clean and dry fingers.
0 If you will use a commercially available monitor protection sheet, observe the
precautions for the sheet.
(Visibility and operability may be impaired depending on the type of monitor
protection sheet.)
0 The touch screen may not operate correctly in the following cases:
– When you are wearing gloves
– When the touch screen is wet
– Cursor buttons
– [MENU/SET] button
– Joystick
– Touch screen
– Front dial
– Rear dial
– Control dial
Display Settings
DC-S1HMST-DVQX1944_eng.book 49 ページ ２０１９年８月８日 木曜日 午前１１時３０分