Basic Operating Instructions

2. Getting Started
DVQX1944 (ENG)
30
Inserting a Battery into the Camera for Charging
0 Using the camera body and the supplied AC adaptor.
The camera is turned off.
0 The indicated charging time is for when the battery has been discharged completely.
The charging time may vary depending on how the battery has been used.
The charging time for the battery in hot/cold environments or a battery that has not
been used for a long time may be longer than normal.
1
Set the camera on/off switch to [OFF].
2
Insert the battery into the camera.
3
Connect the camera USB port and the AC adaptor using
the USB connection cable (C–C).
0 Hold the plugs and insert them straight in or pull them straight out.
(Inserting these at an angle may cause deformation or malfunction)
4
Connect the AC mains lead to
the AC adaptor and then insert
into the electrical outlet.
≥[CHARGE] is displayed on the status
LCD and charging starts.
[FULL] is displayed when charging is
complete.
Charging time Approx. 140 min
0 Use the products supplied with the camera for charging.


DC-S1HMST-DVQX1944_eng.book 30 ページ ２０１９年８月８日 木曜日 午前１１時３０分