Basic Operating Instructions

2. Getting Started
DVQX1944 (ENG)
28

[CHARGE] Light Indications
Battery Insertion
0 Always use genuine Panasonic batteries (DMW-BLJ31).
0 If you use other batteries, we cannot guarantee the quality of this product.
1
Set the camera on/off switch
to [OFF].
2
Open the battery door.
≥Move the battery door release lever
to the [OPEN] position.
Charging
status
0% to 49% 50% to 79% 80% to 99% 100%
[CHARGE]
light
A Blinking B On C Off
0 After charging, disconnect the power source connection and remove the
battery.
0 If the [50%] light is blinking quickly, then charging is not occurring.
– The temperature of the battery or surroundings is either too high or too low.
Try charging at an ambient temperature between 10 °C and 30 °C (50 oF
and 86 oF).
– The terminals of the charger or the battery are dirty.
Remove the connection to the power source, and wipe with a dry cloth.
DC-S1HMST-DVQX1944_eng.book 28 ページ ２０１９年８月８日 木曜日 午前１１時３０分