Basic Operating Instructions

14. Camera Customisation
DVQX1944 (ENG)
161
Using Custom Mode
Set the mode dial to one of [C1] to
[C3].
≥If [C3], the last-used Custom mode will be
called up.

[C3] Custom Mode Selection
1
Set the mode dial to [C3].
2
Press .
0
The Custom mode selection menu appears.
3
Press 34 to select the Custom mode and then press or .

Changing Registered Details
Registered settings do not change even if you change the camera settings
temporarily with the mode dial set to [C1] to [C3].
To change the registered details, overwrite them by using [Save to Custom
Mode] in the [Setup] ([Setting]) menu.
Calling Up Settings
Call up registered Custom mode settings to the selected recording mode
and overwrite the current settings with these.
1
Set to the mode dial to use.
2
Select [Load Custom Mode].
≥ ¨ [ ] ¨ [ ] ¨ [Load Custom Mode]
3
Select the Custom mode to call up.
≥Select the Custom mode and then press or .
0 Calling up of Custom modes is not possible between those created from [P]/
[A]/[S]/[M] modes and those created from [ ] mode.
DC-S1HMST-DVQX1944_eng.book 161 ページ ２０１９年８月８日 木曜日 午前１１時３０分