Basic Operating Instructions

10. Recording Videos
DVQX1944 (ENG)
120
3
Select the position to display.
≥Press 3421 to select and then press or .
0
Positions can be moved to the diagonal directions using the joystick.
0 You can also move using touch operations.
0 You can also rotate to change the size of the waveform.
[Luminance Spot Meter]
Specify any spot on the subject to measure the luminance over a small
area.
1
Set [Luminance Spot Meter].
≥ ¨ [ ] ¨ [ ] ¨ [Luminance Spot Meter] ¨ [ON]
2
Select the position where you want to measure the
luminance.
≥Press 3421 to select and then press or .
0
Positions can be moved to the diagonal directions using the joystick.
0 You can also change the position by dragging the frame on the recording
screen.

Measurement Range
Measuring is possible in the range j7% to 109% (IRE).
0
When [Photo Style] is set to [V-Log], this can be measured with Stop units.
(Calculated as 0 Stop=42% (IRE))
0 You can also change the position by dragging on the recording screen.
0 The waveform and vector scope are not output through HDMI.
DC-S1HMST-DVQX1944_eng.book 120 ページ ２０１９年８月８日 木曜日 午前１１時３０分