User manual

ManualsBrandsPanasonic ManualsDigital CamerasDC-S1

Operating Instructions

Digital Camera

DC-S1

Manufactured by: Panasonic Corporation

Kadoma, Osaka, Japan

Importer for Europe: Panasonic Marketing Europe GmbH

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

F0119SR1039

DVQX1742ZB

Panasonic Corporation

Web Site: http://www.panasonic.com

English

Summary of content (528 pages)

PAGE 1
Panasonic Corporation Operating Instructions Web Site: http://www.panasonic.
PAGE 2
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 2 ページ２０１９年１月１１日 Please read these instructions carefully before using this product, and save this manual for future use. Web Site: http://www.panasonic.com Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic Digital Camera. Please read this document carefully and keep it handy for future reference. Please note that the actual controls and components, menu items, etc.
PAGE 3
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 3 ページ２０１９年１月１１日金曜日 About Operating Instructions 0 Nederlands: “Gebruiksaanwijzing” (PDF-formaat) Om dit te lezen dient u het van de website te downloaden. 0 Português: “Instrucoes de Funcionamento” (formato PDF) Para as ler, descarregue-as a partir do website. 0 Svenska: “Bruksanvisning” (pdf-format) Ladda ned den fran webbplatsen for att lasa den. 0 Dansk: “Betjeningsvejledning” (PDF-format) For at læse den skal du downloade den fra webstedet.
PAGE 4
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 4 ページ２０１９年１月１１日 About Operating Instructions Operating symbols In this document, camera operation is explained using the following symbols: A Front dial B Rear dial Cursor button up/down/left/right C 3421 or Joystick up/down/left/right D Press the centre of the joystick E [MENU/SET] button F Control dial 0 For information about operation methods of the operation part, refer to page 69.
PAGE 5
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 5 ページ２０１９年１月１１日金曜日 About Operating Instructions Download PDF Format “Operating Instructions” To download this document in PDF format from a website, either enter the URL below directly, or scan the QR code. https://panasonic.jp/support/dsc/oi/index.html?model=DC-S1&dest=E 0 Click the desired language. The URL and QR code above can also be accessed from the [Setup] menu, [Online Manual].
PAGE 6
DVQX1742~Safety_eng.fm 6 ページ２０１９年１月１５日火曜日午前９時３６分 Information for Your Safety WARNING: To reduce the risk of fire, electric shock or product damage, 0 Do not expose this unit to rain, moisture, dripping or splashing. 0 Use the recommended accessories. 0 Do not remove covers. 0 Do not repair this unit by yourself. Refer servicing to qualified service personnel. The socket outlet shall be installed near the equipment and shall be easily accessible.
PAGE 7
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 7 ページ２０１９年１月１１日金曜日 Information for Your Safety ∫ About the battery pack CAUTION 0 Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer. 0 When disposing of the batteries, please contact your local authorities or dealer and ask for the correct method of disposal. 0 Do not heat or expose to flame.
PAGE 8
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.
PAGE 9
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 9 ページ２０１９年１月１１日金曜日 Information for Your Safety Cautions for Use 0 Do not use any other USB connection cables except the supplied USB connection cables (C–C and A–C). 0 Do not use any other AC mains leads except the supplied one. 0 Always use a genuine Panasonic Shutter Remote Control (DMW-RS2: optional). 0 Use a “High Speed HDMI cable” with the HDMI logo. Cables that do not comply with the HDMI standards will not work.
PAGE 10
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 10 ページ２０１９年１月１１日 Information for Your Safety Ecodesign information The following are Ecodesign information required by Commission Regulation (EC) No.1275/2008 amended by (EU) No.801/2013. 1) 2) The power consumption of the product in networked standby is approximately 0.4 W if all wired network ports are connected and the wireless network port is activated.
PAGE 11
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 11 ページ２０１９年１月１１日金曜日 Chapters 1. Introduction 23 2. Getting Started 38 3. Basic Operations 63 4. Easy Recording 84 5. Image Recording 89 6. Focus/Zoom 98 7. Drive/Shutter 132 8. Metering/Exposure/ISO Sensitivity 185 9. White Balance/Image Quality 201 10. Flash 223 11. Recording Videos 237 12. Playing Back and Editing of Images 267 13. Camera Customisation 285 14. Menu Guide 310 15. Wi-Fi/Bluetooth 377 16.
PAGE 12
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 12 ページ２０１９年１月１１日 Contents About Operating Instructions .......................................................3 Information for Your Safety..........................................................6 Cautions for Use.................................................................................. 9 Chapters ....................................................................................11 Contents by Function......................................................
PAGE 13
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 13 ページ２０１９年１月１１日金曜日 Contents 3. Basic Operations 63 Basic Recording Operations...................................................... 63 How to Hold the Camera....................................................................63 Adjusting the Angle of the Monitor .....................................................65 Taking Pictures ..................................................................................66 Recording Videos.............................
PAGE 14
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 14 ページ２０１９年１月１１日 Contents 6. Focus/Zoom 98 Selecting the Focus Mode .........................................................98 Using AF ....................................................................................99 [AF Custom Setting(Photo)] ............................................................ 103 Selecting the AF Mode ............................................................105 [Face/Eye/Body/Animal Detect.]...................................
PAGE 15
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 15 ページ２０１９年１月１１日金曜日 Contents Post-Focus Recording ............................................................. 168 Selecting the Focus Position for the Picture to Save .......................171 Focus Stacking ................................................................................173 [Silent Mode]............................................................................ 176 [Shutter Type] ...............................................................
PAGE 16
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 16 ページ２０１９年１月１１日 Contents [Flash Synchro] ............................................................................... 230 Adjusting the Flash Output .............................................................. 231 [Auto Exposure Comp.] ................................................................... 232 [Red-Eye Removal] ......................................................................... 232 Recording Using a Wireless Flash...........................
PAGE 17
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 17 ページ２０１９年１月１１日金曜日 Contents Group Images.......................................................................... 276 Deleting Images....................................................................... 277 [RAW Processing] ................................................................... 279 [Video Divide] .......................................................................... 284 13. Camera Customisation 285 Fn Buttons ...............................
PAGE 18
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 18 ページ２０１９年１月１１日 Contents 15. Wi-Fi/Bluetooth 377 Wi-Fi/Bluetooth Functions........................................................377 Connecting to a Smartphone ...................................................379 Installing “LUMIX Sync” .................................................................. 380 Connecting to a Smartphone (Bluetooth Connection) ..................... 381 Connecting to a Smartphone ([Wi-Fi connection])...........................
PAGE 19
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 19 ページ２０１９年１月１１日金曜日 Contents 16. Connecting to Other Devices 433 Viewing on a TV ...................................................................... 433 Importing Images to a PC........................................................ 437 Installing Software............................................................................437 Copying Images to a PC ..................................................................440 Storing on a Recorder ..........
PAGE 20
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.
PAGE 21
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 21 ページ２０１９年１月１１日金曜日 Contents by Function Drive Drive mode Burst [6K/4K PHOTO] [Time Lapse Shot] Recording with Stop Motion Animation [Self Timer] [Post-Focus] Image Quality [Picture Size] [Picture Quality] RAW JPEG Aspect ratio [White Balance] [Photo Style] [Filter Settings] [Color Space] [6K/4K PHOTO Noise Reduction] [Flicker Decrease (Photo)] [Long Exposure NR] [i.Dynamic Range] [Vignetting Comp.
PAGE 22
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.
PAGE 23
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 23 ページ 1. ２０１９年１月１１日金曜日 Introduction Before Use Firmware of Your Camera/Lens Firmware updates may be provided in order to improve camera capabilities or to add functionality. For smoother recording, we recommend updating the firmware of the camera/lens to the latest version. 0 For the latest information on the firmware or to download/ update the firmware, visit the following support website: https://panasonic.
PAGE 24
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 24 ページ２０１９年１月１１日 1. Introduction Do not place a hand inside the camera mount. This may cause a failure or damage because the sensor is a precision device. If you shake the camera while turning the camera off, a sensor may operate or a rattling sound may be heard. This is caused by the image stabiliser mechanism in the body. It is not a malfunction.
PAGE 25
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 25 ページ２０１９年１月１１日金曜日 1. Introduction No Compensation Regarding Recording Please note that compensation cannot be provided in the event that recording could not be performed due to a problem with the camera or a card. Be Careful with Regard to Copyrights Under copyright law, you may not use the images and audio you have recorded for other than personal enjoyment without the permission of the copyright holder.
PAGE 26
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 26 ページ２０１９年１月１１日 1. Introduction Standard Accessories Digital camera body (This is referred to as camera in this document.) USB connection cable (C–C) Check that all the accessories are supplied before using the camera. 0 Product numbers correct as of January 2019. These may be subject to change. USB connection cable (A–C) K1HY24YY0022 Battery pack (This is referred to as battery pack or battery in this document.) 0 Charge the battery before use.
PAGE 27
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 27 ページ２０１９年１月１１日金曜日 1. Introduction Eye cup¢2 Cover for the battery grip connector¢2 7YE1MC891Z Hot shoe cover¢2 DVKK1054Z Flash synchro socket cap¢2 DVYE1121Z VKF5108 ¢1 Order the part number A if you would like to purchase the battery charger alone. ¢2 This is attached to the camera at the time of purchase. Items Supplied with DC-S1M (Lens Kit Product) 35 mm full-frame interchangeable lens 0 This lens is dust and splash resistant.
PAGE 28
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 28 ページ２０１９年１月１１日 1. Introduction Lenses That Can Be Used The lens mount of this camera is compliant with the L-Mount standard of Leica Camera AG. It can be used with 35 mm full-frame compatible interchangeable lenses and APS-C size interchangeable lenses of this standard.
PAGE 29
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 29 ページ２０１９年１月１１日金曜日 1. Introduction Memory Cards That Can Be Used You can use an XQD memory card and SD memory card with this camera. 0 An XQD memory card is referred to as XQD card in this document. SD memory card, SDHC memory card, and SDXC memory card are referred to by the generic name of SD card. When not differentiating between an XQD card and SD card, a card is referred to as simply card.
PAGE 30
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 30 ページ２０１９年１月１１日 1. Introduction SD Cards That Can Be Used Stably with This Camera To ensure the following recording functions can be used stably, use a card of the supported SD Speed Class, UHS Speed Class, and Video Speed Class. 0 Speed classes are SD card standards to guarantee the minimum speed necessary for continuous writing. 0 When using an XQD card, you will be able to use the functions regardless of the type of card.
PAGE 31
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 31 ページ２０１９年１月１１日金曜日 1. Introduction Names of Parts Camera 8 9 10 11 12 1 2 13 3 14 4 15 5 16 17 18 6 7 1 Stereo microphone (l 250) 0 Take care not to block the microphone with a finger. Audio will be difficult to record. 2 Mode dial (l 68) 3 Mode dial lock button (l 68) 4 Drive mode dial (l 132) 5 Hot shoe (hot shoe cover) (l 223) • Keep the hot shoe cover out of reach of children to prevent swallowing.
PAGE 32
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 32 ページ２０１９年１月１１日 1. Introduction 1 6 7 8 2 9 10 11 12 13 14 15 16 17 3 4 5 1 Dioptre adjustment dial (l 73) 2 Operation lock lever (l 72) 3 [(] (Playback) button (l 267) 4 Monitor lock lever (l 65) 5 Monitor (l 456)/ Touch screen (l 71) 13 Control dial (l 70) 6 Video rec.
PAGE 33
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 33 ページ２０１９年１月１１日金曜日 1. Introduction 1 2 3 4 7 9 10 11 12 13 5 6 8 14 1 Eye sensor (l 74) 10 Card door (l 53) 2 Viewfinder (l 74) 11 Card access lamp (l 54) 3 Eye cup (l 481) 4 Eye cup lock lever (l 481) 5 Tripod mount (l 486) 0 If you attempt to attach a tripod with a screw length of 5.5 mm (0.22 inch) or more, you may not be able to securely fix it in place or it may damage the camera.
PAGE 34
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 34 ページ２０１９年１月１１日 1. Introduction 7 1 2 8 3 4 5 9 10 6 11 12 18 17 16 15 14 1 Shoulder strap eyelet (l 38) 2 Self-timer lamp (l 160)/ AF assist lamp (l 316) 3 Fn button (Fn1) (l 286) 4 Grip 13 1 10 Headphone socket (l 265) 0 Excessive sound pressure from earphones and headphones can cause hearing loss.
PAGE 35
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 35 ページ２０１９年１月１１日金曜日 1. Introduction Supplied Lens S-R24105 1 2 3 4 5 6 1 Lens surface 2 Focus ring (l 125) 3 Zoom ring (l 128) 4 O.I.S. switch (l 180) 5 [AF/MF] switch (l 99, 124) 0 You can switch between AF and MF. If [MF] is set on either the lens or camera, operation will be with MF. 7 8 9 6 Zoom lock switch 0 When you set the focal length to 24 mm and set the switch to [LOCK], the zoom ring is locked.
PAGE 36
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 36 ページ２０１９年１月１１日 1. Introduction Displaying Viewfinder/Monitor At the time of purchase, the viewfinder/monitor displays the following icons. For information about the icons other than those described here, refer to page 456. Viewfinder 1 Monitor 2 3 4 5 FINE L 6 7 AFS FINE L 60 60 F4.
PAGE 37
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 37 ページ２０１９年１月１１日金曜日 1. Introduction Status LCD Display This displays the recording settings of the camera.
PAGE 38
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 38 ページ 2. ２０１９年１月１１日 Getting Started Attaching a Shoulder Strap Attach a shoulder strap to the camera with the following procedure to prevent it from dropping. 1 Pass the shoulder strap through the shoulder strap eyelet A.   2 Pass the end of the shoulder strap through the ring and then pass it through the fastener.   3 Pass the end of the shoulder strap through the other hole of the fastener.
PAGE 39
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 39 ページ２０１９年１月１１日金曜日 2. Getting Started 0 Use the shoulder strap around your shoulder. – Do not wrap the strap around your neck. It may result in injury or accident. 0 Do not leave the shoulder strap where an infant can reach it. – It may result in an accident by mistakenly wrapping around the neck.
PAGE 40
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 40 ページ２０１９年１月１１日 2. Getting Started Charging the Battery You can charge the battery either using the supplied charger, or in the camera body. If you turn on the camera, you can also charge the battery while the camera is powered from an electrical outlet. Instead of using an electrical outlet, you can also connect the camera using a device that supports USB PD (USB Power Delivery). 0 The battery that can be used with the camera is DMW-BLJ31.
PAGE 41
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 41 ページ２０１９年１月１１日金曜日 2. Getting Started 1 Connect the charger and the AC adaptor with the USB connection cable (C–C). 0 Hold the plugs and insert them straight. (Inserting these at an angle may cause deformation or malfunction) 2 3 Connect the AC mains lead to the AC adaptor and then insert into the electrical outlet.   Insert the battery. ≥Insert the terminal end of the battery and push. ≥The [CHARGE] lamp A blinks and charging begins.
PAGE 42
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 42 ページ２０１９年１月１１日 2. Getting Started [CHARGE] Lamp Charging status 0% to 49% 50% to 79% 80% to 99% 100% [CHARGE] lamp A Blinking B Lit C Off 0 After charging, disconnect the power source connection and remove the battery. 0 If the [50%] lamp is blinking quickly, then charging is not occurring. – The temperature of the battery or surroundings is either too high or too low. Try charging at an ambient temperature between 10 °C and 30 °C (50 oF and 86 oF).
PAGE 43
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 43 ページ２０１９年１月１１日金曜日 2. Getting Started Battery Insertion 0 Always use genuine Panasonic batteries (DMW-BLJ31). 0 If you use other batteries, we cannot guarantee the quality of this product. 1 Turn off the camera. 2 Open the battery door. 3 Insert the battery. ≥Move the battery door release lever to the [OPEN] position. ≥Insert the terminal end of the battery and push until a locking sound is heard.
PAGE 44
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 44 ページ２０１９年１月１１日 2. Getting Started Removing the Battery 1 Turn off the camera. 2 Open the battery door. 0 Check that the card access lamp A is off and then open the battery door. 3 Push the lever B in the direction of the arrow and then remove the battery.  0 Ensure that no foreign objects are adhering to the inner side (rubber seal) of the battery door. 0 Remove the battery after use.
PAGE 45
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 45 ページ２０１９年１月１１日金曜日 2. Getting Started Charging the Battery with the Camera Charging time Approx. 140 min 0 Using the camera body and the supplied AC adaptor. The camera is turned off. 0 The indicated charging time is for when the battery has been discharged completely. The charging time may vary depending on how the battery has been used.
PAGE 46
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 46 ページ２０１９年１月１１日 2. Getting Started 4 Connect the AC mains lead to the AC adaptor and then insert into the electrical outlet. ≥The battery display on the status LCD will blink, and charging starts.   0 You can also charge the battery by connecting a USB device (PC, etc.) and the camera with the USB connection cable (C–C or A–C). In that case, charging may take a while.
PAGE 47
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 47 ページ２０１９年１月１１日金曜日 2. Getting Started Status LCD Display Charging status Charging Charging complete Charging error Display 0 After charging, disconnect the connection to the power source. 0 When an error is displayed, charging is not possible. – The temperature of the battery or surroundings is either too high or too low. Try charging at an ambient temperature between 10 °C and 30 °C (50 oF and 86 oF).
PAGE 48
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 48 ページ２０１９年１月１１日 2. Getting Started 0 Even when connecting with devices that support USB PD, you may not be able to charge while using the camera. 0 If connecting with devices (PC, etc.) that do not support USB PD and turning the camera on, then this will supply power only. 0 If the camera temperature rises under the any of following conditions, charging may stop. If the temperature rises further, [ ] will be displayed, and power supply will stop.
PAGE 49
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 49 ページ２０１９年１月１１日金曜日 2.
PAGE 50
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 50 ページ２０１９年１月１１日 2. Getting Started 0 It has been found that counterfeit battery packs which look very similar 0 0 0 0 0 0 0 to the genuine product are made available for purchase in some markets. Some of these battery packs are not adequately protected with internal protection to meet the requirements of appropriate safety standards. There is a possibility that these battery packs may lead to fire or explosion.
PAGE 51
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 51 ページ２０１９年１月１１日金曜日 2. Getting Started [Power Save Mode] This is a function to automatically turn the camera to sleep (power save) status or turn off the viewfinder/monitor if no operation is performed for a set time. Reduces battery consumption. ¨[ ]¨[ [Sleep Mode] ] ¨ Select [Power Save Mode] Sets the amount of time until the camera is put into sleep. [Sleep Mode(Wi- Sets the camera to sleep 15 minutes after being disconnected Fi)] from Wi-Fi.
PAGE 52
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 52 ページ２０１９年１月１１日 2.
PAGE 53
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 53 ページ２０１９年１月１１日金曜日 2. Getting Started Inserting Cards (Optional) You can use an XQD card and SD card with this camera. (l 29) 1 Open the card door. ≥Slide the card door in the direction of the arrow while pushing down the card door lock lever.    2 Insert the cards. A Card slot 1: XQD card B Card slot 2: SD card  ≥Match the orientation of the cards as shown in the figure and then insert them firmly until they click.
PAGE 54
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 54 ページ２０１９年１月１１日 2. Getting Started Card Access Indications The card access lamp lights while the card is being accessed. Removing a Card 1 Open the card door. 0 Check that the card access lamp A is off and then open the card door. 2 Push the card until it clicks and then pull the card out straight. 0 The card may be hot just after the camera has been used. Be careful when removing. 0 Do not perform the following operations during access.
PAGE 55
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 55 ページ２０１９年１月１１日金曜日 2. Getting Started Formatting Cards (Initialisation) Format the cards with the camera before use in order to ensure optimal card performance. 0 When a card is formatted, all of the data stored in the card is erased and cannot be restored. Save a backup of necessary data before formatting the card.
PAGE 56
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 56 ページ２０１９年１月１１日 2. Getting Started Attaching a Lens You can attach the Leica Camera AG L-Mount standard lens to this camera. For information about the lens that can be used, refer to page 28. 0 Change the lens in a location where there is not a lot of dirt and dust. If dirt or dust gets on the lens, refer to page 480. 0 Change the lens while the lens cap is attached. 1 2 Turn off the camera.
PAGE 57
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 57 ページ２０１９年１月１１日金曜日 2. Getting Started 3 Align the lens fitting marks B on the lens and camera and then rotate the lens in the direction of the arrow. ≥Attach the lens by rotating it until it clicks. 0 Insert the lens straight in. Inserting this at an angle to attach it may damage the camera lens mount. Removing a Lens 1 Turn off the camera.
PAGE 58
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 58 ページ２０１９年１月１１日 2. Getting Started Attaching a Lens Hood For recording against strong backlight, a lens hood can reduce the inclusion of unwanted light in images and drop in contrast resulting from the irregular reflection of light that occurs within the lens. It allows you take more beautiful pictures by cutting out excess light.
PAGE 59
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 59 ページ２０１９年１月１１日金曜日 2. Getting Started Removing the Lens Hood While pressing the lens hood button, rotate the lens hood in the direction of the arrow and then remove it.   0 The lens hood can be attached in the reverse direction when carrying the 1 2 3 camera. Remove the lens hood. Align mark C ( ) on the lens hood with the mark on the tip of the lens. Attach the lens hood by rotating it in the direction of the arrow until it clicks.
PAGE 60
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 60 ページ２０１９年１月１１日 2. Getting Started Setting the Clock (When Turning On for the First Time) When you turn the camera on for the first time, a screen to set the time zone and clock appears. Be sure to set these settings before use to ensure images are recorded with the correct date and time information. 1 Set the camera on/off switch to [ON]. ≥If the language select screen is not displayed, proceed to Step .
PAGE 61
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 61 ページ２０１９年１月１１日金曜日 2. Getting Started 6 7 When [Please set the clock] appears, press or . Set the clock. 21: Select an item (year, month, day, hour, minute, or second). 34: Select a value. To set the display order B and time display format C ≥If you select [Style] and then press or , the screen for setting the display order and time display format appears. 8 9 Confirm your selection. ≥Press or . When [The clock setting has been completed.
PAGE 62
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 62 ページ２０１９年１月１１日 2. Getting Started 0 If the camera is used without setting the clock, it will be set to 0:00:00, 1st January 2019. 0 Clock settings are maintained for approx. 3 months using the built-in clock battery even without the battery. (Leave the fully-charged battery in the camera for approx. 24 hours to charge the built-in battery.
PAGE 63
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 63 ページ 3. ２０１９年１月１１日金曜日 Basic Operations Basic Recording Operations How to Hold the Camera To minimise camera shake, hold the camera so that it will not move during recording. Hold the camera with both hands, keep your arms still at your side, and stand with your feet shoulder width apart. ≥ Hold the camera firmly by wrapping your right hand around the camera grip. ≥ Support the lens from below with your left hand.
PAGE 64
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 64 ページ２０１９年１月１１日 3. Basic Operations Vertical Orientation Detection Function This function detects when pictures were recorded with the camera held vertically orientated. With the default settings, pictures are automatically played back vertically oriented. 0 If you set [Rotate Disp.] to [OFF], pictures will be played back without being rotated.
PAGE 65
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 65 ページ２０１９年１月１１日金曜日 3. Basic Operations Adjusting the Angle of the Monitor This camera has a 3-axis tiltable monitor. Adjust the angle of the monitor to match the recording conditions. This is useful for high and low angle recording. ≥High angle recording (horizontal position) ≥Low angle recording (horizontal position) ≥High angle recording/Low angle recording (vertical position)   0 Open the monitor while pushing up on the monitor lock lever.
PAGE 66
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 66 ページ２０１９年１月１１日 3. Basic Operations Taking Pictures 1 Adjust the focus. ≥Press the shutter button halfway (press it gently). ≥The aperture value A and shutter speed B are displayed. (When the correct exposure cannot be obtained, the indications blink in red.) ≥Once the subject is in focus, the focus indication C lights. (When the subject is not in focus, the indication blinks.) 60 F4.0 0 You can also perform the same operation by pressing [AF ON].
PAGE 67
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 67 ページ２０１９年１月１１日金曜日 3. Basic Operations 0 Recorded pictures can be displayed automatically by setting [Auto Review] of the [Custom] ([Monitor / Display]) menu. You can also change the picture display duration to your preferred setting. (l 345) 0 With the default settings, you cannot take a picture until the subject is brought into focus.
PAGE 68
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 68 ページ２０１９年１月１１日 3. Basic Operations Selecting the Recording Mode While pressing the mode dial lock button (1), rotate the mode dial (2).
PAGE 69
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 69 ページ２０１９年１月１１日金曜日 3. Basic Operations Camera Setting Operations When changing the camera settings, operate the camera using the following operation parts. To prevent accidental operation, you can disable operation with the operation lock lever.
PAGE 70
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 70 ページ 3. Basic Operations Front Dial ( )/Rear Dial ( ) Rotate: Selects an item or numeric value. 0 Sets the aperture, shutter speed, and other settings when you are recording in the P/A/S/M modes. The operation method can be changed in [Dial Set.]. (l 343) Control Dial ( ) Rotate: Selects an item or numeric value. 0 Adjusts the headphone volume during recording. The function can be changed in [Control Dial Assignment] of [Dial Set.].
PAGE 71
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 71 ページ２０１９年１月１１日金曜日 3. Basic Operations Joystick (3421/ ) The joystick can be operated in 8 directions by tilting it up, down, left, right and diagonally and by pressing the centre part. A Tilt: Selects an item or numeric value, or moves a position. B Press: Confirms a setting.  0 When recording, this moves the AF area and MF Assist. The joystick functions for recording can be changed in [Joystick Setting].
PAGE 72
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 72 ページ２０１９年１月１１日 3. Basic Operations 0 Touch the screen with clean and dry fingers. 0 If you will use a commercially available monitor protection sheet, observe the precautions for the sheet. (Visibility and operability may be impaired depending on the type of monitor protection sheet.
PAGE 73
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 73 ページ２０１９年１月１１日金曜日 3. Basic Operations Display Settings Setting the Viewfinder Adjusting the Viewfinder Dioptre Rotate the dioptre adjustment dial while looking through the viewfinder. 0 Adjust the dioptre until you can see the characters clearly. Switching the Viewfinder Display Magnification Press [V.MODE]. ≥ The display magnification of the viewfinder can be switched between 3 levels.
PAGE 74
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 74 ページ２０１９年１月１１日 3. Basic Operations Switching Between the Monitor and Viewfinder With the default settings, automatic viewfinder/monitor switching is set. When you look through the viewfinder, the eye sensor works and the camera switches from monitor display to viewfinder display. You can switch to viewfinder display or monitor display with [LVF]. Press [LVF] A.
PAGE 75
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 75 ページ２０１９年１月１１日金曜日 3. Basic Operations Switching the Display Information The recording information (icons) on the recording screen and playback screen can be hidden. The monitor on the rear of the camera can be set to display only recording information or turned off. Press [DISP.]. ≥ The display information is switched.
PAGE 76
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 76 ページ２０１９年１月１１日 3. Basic Operations 0 Press [ ] to switch between display/hide of the level gauge. This can also be set by using [Level Gauge]. (l 346). Control panel operation You can touch items on the control panel to directly change their settings. These can also be changed with the following operations: 1 Press one of the cursor buttons to enable selection of items. 0 0 0 Selected items are displayed in yellow. AUTO 2 Rotate or to select an item.
PAGE 77
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 77 ページ２０１９年１月１１日金曜日 3. Basic Operations Turning On the Status LCD Backlight Press [ ]. ≥ The backlight will turn on. ≥ If the camera is left without any operations for approx. 5 seconds, the backlight turns off. 0 With the default settings, the illumination button will also light. 0 If you press [ ] again or fully press the shutter button, the backlight turns off.
PAGE 78
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 78 ページ２０１９年１月１１日 3. Basic Operations Quick Menu This menu enables you to quickly set functions that are frequently used during recording without calling the menu screen. You can also change the Quick menu display method and the items to display. 1 Display the Quick menu. 2 Select a menu item. 3 4 78 ≥Press [Q]. ≥Press 3421. ≥Directions on the diagonal can also be selected using the joystick. ≥Selection is also possible by rotating .
PAGE 79
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 79 ページ２０１９年１月１１日金曜日 3. Basic Operations 0 Some items cannot be set depending on the recording mode or camera settings. 0 The Quick menu can be customised: [ ]¨[ ] ¨ [Q.
PAGE 80
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 80 ページ２０１９年１月１１日 3. Basic Operations Menu Operation Methods In this camera, the menu is used for setting a wide variety of functions and performing camera customisations. Menu operation is possible in a variety of ways including using the cursors, joystick, dials, and touch. Configuration and operation parts of the menu The menu can be operated by pressing 21 to move between menu screens.
PAGE 81
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 81 ページ２０１９年１月１１日金曜日 3. Basic Operations 3 Select a sub tab. 4 Select a menu item. 5 ≥Press 34 to select a sub tab and then press 1. ≥You can also perform the same operation by rotating to select the sub tab and then pressing or . ≥Press 34 to select a menu item and then press 1. ≥You can also perform the same operation by rotating to select the menu item and then pressing or . Select a setting item and then confirm your selection.
PAGE 82
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 82 ページ２０１９年１月１１日 3. Basic Operations 6 Close the menu. ≥Press the shutter button halfway. ≥You can also close the menu by pressing [ ] several times. 0 For details about menu items, refer to Menu Guide. (l 310) Displaying Descriptions About Menu Items and Settings If you press [DISP.] while a menu item or setting item is selected, a description about the item is displayed on the screen.
PAGE 83
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 83 ページ２０１９年１月１１日金曜日 3. Basic Operations [Reset] Return each of the following settings to the default setting: – Recording settings – Network settings (settings of [Wi-Fi Setup] and [Bluetooth]) – Setup and custom settings (other than [Wi-Fi Setup] and [Bluetooth]) ¨[ ]¨[ ] ¨ Select [Reset] 0 If you reset the setup and custom settings, the following settings will also be reset: – Settings of [Rotate Disp.
PAGE 84
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 84 ページ 4. ２０１９年１月１１日 Easy Recording Intelligent Auto Mode The [iA] mode (Intelligent Auto mode) can record images using settings automatically selected by the camera. The camera detects the scene to set the optimal recording settings automatically to match the subject and recording conditions. 1 Set the mode dial to [iA]. 2 Aim the camera at the subject. 3 Adjust the focus. ≥When the camera detects the scene, the recording mode icon changes.
PAGE 85
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 85 ページ２０１９年１月１１日金曜日 4. Easy Recording 4 Start recording. ≥Press the shutter button fully. 0 Backlight compensation operates automatically to prevent subjects from appearing dark when there is a backlight.
PAGE 86
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 86 ページ２０１９年１月１１日 4. Easy Recording 0 If none of the scenes are applicable, recording is with [ ] (standard setting). 0 Different scene types may be selected for the same subject depending on the recording conditions. AF Mode Changing the AF mode. 0 Each press of [ ] changes the AF mode. ([Face/Eye/ Body/Animal Detect.]) The camera detects a person’s face, eyes, and body (entire body or upper half of the body) and the body of animals, and adjusts the focus.
PAGE 87
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 87 ページ２０１９年１月１１日金曜日 4. Easy Recording Recording Using Touch Functions Touch Shutter This function focuses on a touched position and then releases the shutter. 0 With the default settings, the Touch Tab is not displayed. Set [Touch Tab] to [ON] in [Touch Settings]. (l 340) 1 2 3 Touch [ ]. Touch [ × ]. ≥The icon changes to [ ] indicating that you can start Touch Shutter recording. × Touch the subject you wish to focus on.
PAGE 88
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 88 ページ２０１９年１月１１日 4. Easy Recording Touch AE This function adjusts the brightness according to a touched position. When a subject’s face appears dark, you can make the screen brighter to match the face. 0 With the default settings, the Touch Tab is not displayed. Set [Touch Tab] to [ON] in [Touch Settings]. (l 340) 1 2 3 Touch [ Touch [ ]. AE ]. ≥The Touch AE settings screen appears. × Touch the subject to which you wish to adjust the brightness.
PAGE 89
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 89 ページ 5. ２０１９年１月１１日金曜日 Image Recording [Aspect Ratio] You can select the image aspect ratio.
PAGE 90
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 90 ページ２０１９年１月１１日 5. Image Recording [Picture Size] Sets the picture’s image size. The image size varies depending on the [Aspect Ratio] or the lens used. When an APS-C lens is used, the image area switches to the one for APS-C, thereby narrowing the angle of view. ¨[ [Aspect Ratio] [4:3] [3:2] [16:9] ]¨[ ] ¨ Select [Picture Size] Picture size When using full-frame lenses When using APS-C lenses [L] (21.5M) 5328k4000 [L] (9.5M) 3536k2656 [M] (10.
PAGE 91
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 91 ページ２０１９年１月１１日金曜日 5.
PAGE 92
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 92 ページ２０１９年１月１１日 5. Image Recording [Picture Quality] Set the compression rate used for storing pictures. ¨[ ]¨[ Setting ] ¨ Select [Picture Quality] File format [FINE] [STD.] [RAWrFINE] [RAWrSTD.] [RAW] 92 Settings details JPEG images that give priority to image quality. JPEG RAWiJPEG RAW DVQX1742 (ENG) JPEG images of standard image quality. This is useful for increasing the number of recordable pictures without changing the picture size.
PAGE 93
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 93 ページ２０１９年１月１１日金曜日 5. Image Recording Note on RAW RAW format refers to a data format of images that have not been processed on the camera. Playback and editing of RAW images require the camera or the dedicated software. 0 You can process RAW images on the camera. (l 279) 0 Use software (“SILKYPIX Developer Studio” by Ichikawa Soft Laboratory) to process and edit RAW files on a PC.
PAGE 94
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 94 ページ２０１９年１月１１日 5. Image Recording [Double Card Slot Function] This sets the way recording to the card slots 1 and 2 is performed. ¨[ [Recording Method] ]¨[ ] ¨ Select [Double Card Slot Function] [Relay Rec] Selects the priority of card slots for recording. [Destination Card Slot]: [ ]/[ ] Relays recording to the card in the other card slot after the first card runs out of free space. [Backup Rec] Records the same images to both cards simultaneously.
PAGE 95
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 95 ページ２０１９年１月１１日金曜日 5. Image Recording [Folder / File Settings] Set the folder and file name where to save the images. Folder name File name 100ABCDE PABC0001.
PAGE 96
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 96 ページ２０１９年１月１１日 5. Image Recording 0 Each folder can store up to 1000 files. 0 File numbers are assigned sequentially from 0001 to 9999 in the order of recording. If you change the storage folder, a number continuing on from the last file number will be assigned. 0 In the following cases, a new folder with an incremented folder number will be created automatically when the next file is saved: – The number of files in the current folder reaches 1000.
PAGE 97
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 97 ページ２０１９年１月１１日金曜日 5. Image Recording [File Number Reset] Resets the file number of the next recording to 0001. ¨[ ]¨[ ] ¨ Select [File Number Reset] Settings: [Card Slot 1(XQD)]/[Card Slot 2(SD)] 0 When recording is performed after resetting this item, the folder number is updated and the file number starts from 0001. 0 Folder numbers from 100 to 999 can be assigned. When the folder number reaches 999, the file number cannot be reset.
PAGE 98
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 98 ページ 6. ２０１９年１月１１日 Focus/Zoom Selecting the Focus Mode Select the focusing method (focus mode) to match subject movement. Set the focus mode lever. [S] ([AFS]) This is suitable for recording still subjects. While the shutter button is pressed halfway, this maintains a single point of focus. The focus stays locked while the shutter button is pressed halfway. [C] ([AFC]) This is suitable for recording moving subjects.
PAGE 99
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 99 ページ２０１９年１月１１日金曜日 6. Focus/Zoom Using AF AF (Auto Focus) refers to automatic focusing. Select the focus mode and the AF mode appropriate for the subject and scene. 1 Set the focus mode to [S] or [C]. ≥Set the focus mode lever. (l 98) 2 Select the AF mode. ≥Press [ ] to display the AF mode selection screen, and set using or . (l 105) 0 In [iA] mode, each press of [ switches between [ (l 86) 3 ] and [ ] ]. Press the shutter button halfway.
PAGE 100
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 100 ページ２０１９年１月１１日 6. Focus/Zoom Focus In focus Not in focus Focus icon A Lights Blinking AF area B Green Red AF beep Two beeps — Low illumination AF 0 In dark environments, low illumination AF automatically operates, and the focus icon is indicated as [ LOW ]. 0 Achieving focus may take more time than usual. Starlight AF 0 If the camera detects stars in the night sky after determining low illumination AF, then Starlight AF will be activated.
PAGE 101
DC-S1E-DVQX1742_eng.book 101 ページ２０１９年３月１５日金曜日午後３時２３分 6. Focus/Zoom [AF ON] button You can also activate AF by pressing [AF ON].
PAGE 102
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 102 ページ２０１９年１月１１日 6. Focus/Zoom On the recording screen, press and hold [Fn1]. 0 Part of the screen is displayed enlarged while [Fn1] is pressed and held. 0 When the screen is enlarged, pressing the shutter button halfway re-acquires focus in a small central AF area. 0 When the screen is enlarged, turn or to adjust the magnification. Use for more detailed adjustments.
PAGE 103
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 103 ページ２０１９年１月１１日金曜日 6. Focus/Zoom [AF Custom Setting(Photo)] Select features of AF operation when recording using [AFC] that are appropriate for the subject and scene. Each of these features can be further customised. 1 2 Set the focus mode to [AFC]. (l 98) Set [AF Custom Setting(Photo)].
PAGE 104
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 104 ページ２０１９年１月１１日 6. Focus/Zoom Adjusting AF Custom Settings 1 Press 21 to select the AF Custom setting type. 2 Press 34 to select items and press 21 to adjust. 0 To reset settings to the default, press [DISP.]. or . 3 Press Sets the tracking sensitivity for the movement of subjects. i When the distance to the subject changes drastically, the camera re-adjusts the focus immediately. You can bring different subjects into focus one after another.
PAGE 105
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 105 ページ２０１９年１月１１日金曜日 6. Focus/Zoom Selecting the AF Mode Select the focusing method to match the position and number of subjects. 1 Press [ 2 Select the AF mode. ]. ≥The AF mode selection screen appears. ≥Press 21 to select an item and then press or . ヤヒヤピ ¢ to [Face/Eye/Body/ Animal Detect.] l 106 [Tracking] l 109 [225-Area] l 111 [Zone (Vert./ Horz.
PAGE 106
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 106 ページ２０１９年１月１１日 6. Focus/Zoom 0 In [Time Lapse Shot], [ ] cannot be used. 0 When the focus mode is set to [AFC], [ ] is not available. 0 When the following functions are being used, the AF mode is fixed to [ ]: – [65:24]/[2:1] ([Aspect Ratio]) – [Miniature Effect] ([Filter Settings]) 0 The AF mode cannot be set when using Post-Focus. [Face/Eye/Body/Animal Detect.
PAGE 107
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 107 ページ２０１９年１月１１日金曜日 6. Focus/Zoom Specify the Person, Animal, or Eye to Bring into Focus When the person or animal to be brought into focus is shown using the white AF area, you can change this to a yellow AF area. ≥ Touch operation Touch the person, animal or eye indicated with the white AF area. 0 The AF area will change to yellow. 0 Touching outside the AF area displays the AF area setting screen. Touch [Set] to set the [ AF area at the position touched.
PAGE 108
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 108 ページ２０１９年１月１１日 6. Focus/Zoom Move and Change the Size of the Yellow AF Area You can move the yellow AF area to the position of the white AF area and replace the white AF area with the yellow AF area. If moving to a position outside an AF area, then the [ ] AF area will be set. 1 Press [ ] to display the AF mode selection screen. 2 Select [ ] and then press 4. 3 Press 3421 to move the position of the AF area. or to change the size of the AF area. 5 Press .
PAGE 109
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 109 ページ２０１９年１月１１日金曜日 6. Focus/Zoom [Tracking] When the focus mode is set to [AFC], the AF area follows the movement of the subject, maintaining focusing. Start tracking. ≥ Aim the AF area over the subject, and press the shutter button halfway. The camera will track the subject while the shutter button is pressed halfway or pressed fully. 0 The AF area turns red when tracking fails.
PAGE 110
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 110 ページ２０１９年１月１１日 6. Focus/Zoom Move the Position of the AF Area 1 Press [ ] to display the AF mode selection screen. 2 Select [ ] and then press 4. 3 Press 3421 to move the position of the AF area. 0 Positions can be moved to the diagonal directions using the joystick. 0 You can also move the AF area by touching. 0 To return the position back to the centre, press [DISP.]. 4 Press 110 .
PAGE 111
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 111 ページ２０１９年１月１１日金曜日 6. Focus/Zoom [225-Area] The camera selects the most optimal AF area to focus from 225 areas. When multiple AF areas are selected, all selected AF areas will be brought into focus. When the focus mode is set to [AFC], ensuring that the subject stays within the 225 areas during recording will ensure the subject stays in focus. Specify the [AFC] Start Point When the focus mode is set to [AFC], you can specify at which area to start [AFC].
PAGE 112
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 112 ページ２０１９年１月１１日 6. Focus/Zoom [Zone (Vert./ Horz.)]/ (Oval)] [Zone (Square)]/ [Zone [Zone (Vert./ Horz.)] From the 225 AF areas, vertical and horizontal zones can be focused. Horizontal pattern Vertical pattern [Zone (Square)] From the 225 AF areas, a central square zone can be focused. [Zone (Oval)] From the 225 AF areas, a central oval zone can be focused. 0[ ] is not displayed with default settings. Set [Zone (Square)] to [ON] in [Show/Hide AF Mode].
PAGE 113
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 113 ページ２０１９年１月１１日金曜日 6. Focus/Zoom Move and Change the Size of the AF Area 1 Press [ ] to display the AF mode selection screen. 2 Select [ ], [ ] or [ ] and then press 4. 3 Press 3421 to move the position of the AF area. 0 You can also move the AF area by touching. ≥ When [ ] is selected – Press 34 to switch to a horizontal pattern AF area. – Press 21 to switch to a vertical pattern AF area.
PAGE 114
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 114 ページ２０１９年１月１１日 6. Focus/Zoom [1-Area+]/ [1-Area] [1-Area+] Emphasis within a single AF area can be focused. Even when the subject moves out of the single AF area, this remains focused in a supplementary AF area (A). 0 Effective when recording moving subjects that are difficult to track with [ ]. [1-Area] Specify the position to be brought into focus. Move and Change the Size of the AF Area 1 Press [ ] to display the AF mode selection screen.
PAGE 115
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 115 ページ２０１９年１月１１日金曜日 6. Focus/Zoom Operations on the AF area movement screen Button operation Touch operation Touch 3421 Pinch out/ pinch in s [DISP.] [Reset] Description of operation Moves the AF area 0 Positions can be moved to the diagonal directions using the joystick. Enlarges/reduces the AF area in small steps. Enlarges/reduces the AF area. First time: Returns the AF area position to the centre.
PAGE 116
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 116 ページ２０１９年１月１１日 6. Focus/Zoom Move the Position of the AF Area 1 Press [ ] to display the AF mode selection screen. 2 Select [ ] and then press 4. 3 Press 3421 to set the position of [i] and then press or 0 Positions can be moved to the diagonal directions using the joystick. 0 The selected position on the screen will be enlarged. 0 The AF area cannot be moved to the edge of the screen. 4 Press 3421 to fine-adjust the position of [i]. or 5 Press .
PAGE 117
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 117 ページ２０１９年１月１１日金曜日 6. Focus/Zoom 0 When the picture is displayed in windowed mode, you can enlarge the picture by approx. 3k to 6k; when the picture is displayed in full screen, you can enlarge the picture by approx. 3k to 10k. 0 You can also take a picture by touching [ ].
PAGE 118
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 118 ページ２０１９年１月１１日 6. Focus/Zoom 3 Select the AF area. ≥Touch operation Touch the area to make the AF area. 0 To select consecutive points, drag the screen. 0 To cancel selection of the selected AF area, touch it again. ≥Button operation Press 3421 to select the AF area and then set with or (Repeat this) 0 Positions can be moved to the diagonal directions using the joystick. 0 To cancel selection of the selected AF area, press or again.
PAGE 119
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 119 ページ２０１９年１月１１日金曜日 6. Focus/Zoom AF Area Movement Operation In default settings, you can use the joystick to directly move and change the size of the AF area when recording. 1 Move the position of the AF area. ≥On the recording screen, tilt the joystick. 0 Pressing enables switching between the default and set AF area positions. In [ ], this operation switches the person, animal or eye to be brought into focus. Display the magnified screen with [ ].
PAGE 120
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 120 ページ２０１９年１月１１日 6. Focus/Zoom 3 Confirm your selection. ≥Press the shutter button halfway. ≥Return to the recording screen. 0 For [ ], on the recording screen, press to cancel the AF area setting. 0 When [Metering Mode] is [ ], the metering target also moves together with the AF area. 0 In [ ], [ ], [ ], and [ ヤヒ ] to [ ヤピ ], the size of the AF area cannot be changed. 0 In [ ], moving the AF area and changing the size are not possible.
PAGE 121
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 121 ページ２０１９年１月１１日金曜日 6. Focus/Zoom Focus on the Touched Position ([AF]) 1 Touch the subject. 0 Moves the AF area to the touched position. 2 Pinch in/pinch out to change the AF area size. 0 The first touch of [Reset] returns the AF area position to the centre. The second press returns the size of the AF area to the default. 3 Touch [Set]. 0 In [ ], touch [Exit]. 0 For [ ], on the recording screen, touch [ ] to cancel the AF area setting.
PAGE 122
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 122 ページ２０１９年１月１１日 6. Focus/Zoom Moving the AF Area Position with the Touch Pad During viewfinder display, you can touch the monitor to change the position and size of the AF area. 1 2 Set [Touch Pad AF]. ≥ ¨[ ]¨[ ] ¨ [Touch Settings] ¨ [Touch Pad AF] ¨ [EXACT]/[OFFSET] Move the position of the AF area. ≥During viewfinder display, touch the monitor. 3 Change the size of the AF area. ≥Rotate or . 0 Use for more detailed adjustments.
PAGE 123
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 123 ページ２０１９年１月１１日金曜日 6. Focus/Zoom Setting Items ([Touch Pad AF]) [EXACT] Moves the AF area of the viewfinder by touching a desired position on the touch pad. [OFFSET] Moves the AF area of the viewfinder according to the distance you drag the touch pad. [OFF] — [Focus Switching for Vert / Hor] Memorises separate positions for AF areas for when the camera is vertically aligned and for when it is horizontally aligned.
PAGE 124
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 124 ページ２０１９年１月１１日 6. Focus/Zoom Record Using MF MF (Manual Focus) refers to manual focusing. Use this function when you want to fix the focus or when the distance between the lens and the subject is determined and you do not want to activate AF. 1 2 Set the focus mode lever to [MF]. Select the point to be brought into focus. ≥Tilt the joystick to select the point to bring into focus. ≥Even by pressing [ ], you can display the focus position movement screen.
PAGE 125
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 125 ページ２０１９年１月１１日金曜日 6. Focus/Zoom 4 Adjust the focus. ≥Rotate the focus ring. A MF Assist (enlarged screen) 0 This will display the in-focus portion highlighted with colour. (Peaking B) 0 A recording distance guideline is displayed. (MF Guide C) D Indicator for ¶ (infinity) (m)∞10 5 3 2 1.5 1 0.5 0.1 AF 5 Close the MF Assist screen. 6 Start recording. ≥Press the shutter button halfway. ≥This operation can also be performed by pressing .
PAGE 126
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 126 ページ２０１９年１月１１日 6. Focus/Zoom Operations on the MF Assist Screen Button operation Touch operation 3421 Drag Pinch out/ pinch in s Description of operation Moves the enlarged display position. 0 Positions can be moved to the diagonal directions using the joystick. Enlarges/reduces the screen in small steps. Enlarges/reduces the screen. Switches magnification window (windowed mode/full screen mode). [DISP.
PAGE 127
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 127 ページ２０１９年１月１１日金曜日 6. Focus/Zoom 0 On the recording screen, you can rotate the focus ring to display the MF Assist screen. If you have enlarged the picture by rotating the focus ring, the assist screen will close approx. 10 seconds after the operation. 0 During MF, pressing [AF ON] will activate AF. 0 The recording distance reference mark is a mark used to measure the focus distance. Use this when taking pictures with MF or taking close-up pictures.
PAGE 128
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 128 ページ２０１９年１月１１日 6. Focus/Zoom Recording Images with Zoom Use the optical zoom of the lens to zoom to telephoto or wide-angle. When taking pictures, use [Ex. Tele Conv.] to increase a telescopic effect without image deterioration. When recording videos, use [Image Area of Video] to obtain the same telescopic effect as [Ex. Tele Conv.]. 0 For details about [Image Area of Video], refer to page 245. Rotate the zoom ring.
PAGE 129
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 129 ページ２０１９年１月１１日金曜日 6. Focus/Zoom Extra Tele Conversion [Ex. Tele Conv.] enables you to take pictures that are further enlarged beyond what is available with the optical zoom, without any deterioration in image quality. 0 The [Ex. Tele Conv.] maximum magnification ratio differs depending on the [Picture Size] set in the [Photo] ([Image Quality]) menu. – Set to [ M]: 1.4k – Set to [ S]: 2.0k (1.9k when using APS-C lenses) 1 Set [Picture Size] to [M] or [S].
PAGE 130
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 130 ページ２０１９年１月１１日 6. Focus/Zoom Changing the Zoom Magnification Button operation 1 Set [Ex. Tele Conv.] to [ZOOM]. ¨[ 0 ]¨[ ] ¨ [Ex. Tele Conv.] ¨ [ZOOM] 2 Set the Fn button to [Zoom Control]. (l 286) 3 Press the Fn button. 4 Press the cursor buttons to operate the zoom. EXS 31: T (telephoto) 24: W (wide-angle) 0 Press the Fn button again, or wait a EX1.8x specified time to end zoom operation. 0 Displayed zoom magnifications A are approximate.
PAGE 131
DC-S1E-DVQX1742_eng.book 131 ページ２０１９年３月１５日金曜日午前１１時４７分 6. Focus/Zoom 4 Drag the slide bar to operate the zoom.  T: Telephoto W: Wide-angle 0 To end Touch Zoom operations, touch [ ] again.  0 You can register functions to Fn buttons: [ ]¨[ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Ex. Tele Conv.] (l 286) 0 When displaying the [Ex. Tele Conv.] setting screen using the Fn button, pressing [DISP.] allows you to change the [Picture Size] setting. 0 [Ex. Tele Conv.
PAGE 132
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 132 ページ 7. ２０１９年１月１１日 Drive/Shutter Selecting the Drive Mode You can switch the drive mode to Single, Burst, etc. to match the recording conditions. Rotating the drive mode dial. / Single Takes one picture each time the shutter button is pressed. Burst (l 133, 137) Takes pictures continuously while the shutter button is pressed and held. 6K/4K photo recording is also possible.
PAGE 133
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 133 ページ２０１９年１月１１日金曜日 7. Drive/Shutter Taking Burst Pictures Takes pictures continuously while the shutter button is pressed and held. You can choose a burst setting which enables burst recording in high image quality, [H], [M] or [L], or one which enables high-speed burst recording, [ ] (6K/4K photo), to suit the recording conditions. 1 Set the drive mode dial to [ ] (Burst Shot 1) or [ ] (Burst Shot 2).
PAGE 134
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 134 ページ２０１９年１月１１日 7.
PAGE 135
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 135 ページ２０１９年１月１１日金曜日 7. Drive/Shutter Number of Pictures That Can Be Taken Continuously When you press the shutter button halfway, the number of pictures that can be taken continuously will appear on the recording screen and the status LCD. ISO100 r20 Example) When 20 frames: [r20] 0 Once recording starts, the number of pictures that can be taken continuously will decrease. When [r0] appears, the burst rate decreases.
PAGE 136
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 136 ページ２０１９年１月１１日 7. Drive/Shutter Exposure when Taking Burst Pictures Focus mode [H] [AFS] Fixed to the exposure of the first frame [AFC] The exposure is adjusted for each frame [MF] Fixed to the exposure of the first frame [M]/[L] The exposure is adjusted for each frame 0 It may take a while to save burst pictures. If you continue to take burst pictures while saving is in progress, the number of burst picture frames that can be taken will be reduced.
PAGE 137
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 137 ページ２０１９年１月１１日金曜日 7. Drive/Shutter 6K/4K Photo Recording With 6K Photo, you can take high-speed burst pictures at 30 frames/ second and save the desired pictures, each made up of approx. 18 million pixels, extracted from their burst file. With 4K Photo, you can take high-speed burst pictures at 60 frames/ second and save the desired pictures, each made up of approx. 8 million pixels.
PAGE 138
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 138 ページ２０１９年１月１１日 7. Drive/Shutter 3 Select [Picture Size / Burst Speed]. ≥ ¨[ ]¨[ ] ¨ [6K/4K PHOTO] ¨ [Picture Size / Burst Speed] Picture size [6K 18M] ¢1 [4K H 8M]¢2 [4K 8M]¢2 4 [4:3]: [3:2]: 4992k3744 5184k3456 [4:3]: [3:2]: [16:9]: [1:1]: 3328k2496 3504k2336 3840k2160 2880k2880 Burst rate 30 frames/second 60 frames/second 30 frames/second ¢1 6K photo ¢2 4K photo Select [Rec Method].
PAGE 139
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 139 ページ２０１９年１月１１日金曜日 7. Drive/Shutter [ ][ ][ ] [6K/4K Burst(S/S)] “S/S” is an abbreviation for start/stop. When you wish to capture an unpredictable photo opportunity Starts taking burst pictures when the shutter button is pressed. Pressing the button again stops taking burst pictures. The start tone and stop tone are output.
PAGE 140
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 140 ページ２０１９年１月１１日 7. Drive/Shutter [6K/4K Burst(S/S)] 1 2 Press the shutter button fully to start recording. Press the shutter button fully again to stop recording. C Start (First) D Stop (Second) E Recording is performed 0 You can add markers by pressing [Q] during recording. (Up to 40 markers per recording) This allows you to skip to the positions where you added markers when selecting pictures from a 6K/4K burst file.
PAGE 141
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 141 ページ２０１９年１月１１日金曜日 7. Drive/Shutter 0 The continuous recordable time varies depending on the [Picture Size / Burst Speed] setting. – [6K 18M]: 10 minutes – [4K H 8M]/[4K 8M]: 15 minutes 0 The file save method differs depending on the type of card. – SDHC memory card, XQD card of 32 GB or less: A new file will be created to continue recording if the file size exceeds 4 GB. – SDXC memory card, XQD card over 32 GB: Files are not divided for recording.
PAGE 142
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 142 ページ２０１９年１月１１日 7. Drive/Shutter Notes on 6K/4K Photos Shutter Sound for Recording An electronic shutter is used for 6K/4K photo recording. You can set a shutter sound or beep tone in [Beep] of the [Setup] ([IN/OUT]) menu. (l 361) 0 High-speed burst pictures can be taken quietly when used in combination with [Silent Mode].
PAGE 143
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 143 ページ２０１９年１月１１日金曜日 7. Drive/Shutter Camera Settings for 6K/4K Photo The settings are automatically switched to the optimal settings for 6K/4K photo recording. 0 The following [Photo] menus are fixed: [Picture Size]¢ [6K] (18 M) [4K] (8 M) [Picture Quality] [FINE] [Shutter Type] [ELEC.] 0 6K/4K burst files are taken using the following settings. The settings in the [Video] menu are not applied to 6K/4K burst files. [Rec.
PAGE 144
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 144 ページ２０１９年１月１１日 7. Drive/Shutter 0 The following functions are not available during 6K/4K photo recording: – HDMI output 0 Using HDMI output results in the following: – [6K/4K Pre-Burst] changes to [6K/4K Burst]. – [Pre-Burst Recording] is not available.
PAGE 145
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 145 ページ２０１９年１月１１日金曜日 7. Drive/Shutter Selecting Pictures from a 6K/4K Burst File 1 Select a 6K/4K burst file on the playback screen. (l 267) ≥Select an image with the [ ] or [ ] icon and then press 3. ≥You can also perform the same operation by touching [ ] or [ ]. 2 3 0 If the images were recorded with [6K/4K Pre-Burst], proceed to Step . Roughly select the scene. ≥Drag the slide bar A.
PAGE 146
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 146 ページ２０１９年１月１１日 7. Drive/Shutter 4 Save the picture. ≥Touch [ ] or [ ]. ≥A confirmation screen appears. 0 The picture is saved in JPEG format. 0 The recording information (Exif information), such as the shutter speed, aperture, and ISO sensitivity, is also saved with the picture that is saved.
PAGE 147
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 147 ページ２０１９年１月１１日金曜日 7. Drive/Shutter Correcting Pictures After Recording (Post-Recording Refinement) Correcting Distortion in Pictures ([Reduce Rolling Shutter]) When saving pictures, correct any distortion caused by the electronic shutter (rolling shutter effect). 1 On the save confirmation screen in Step 4 on page 146, touch [Reduce Rolling Shutter]. 0 If correction is not effective, the confirmation screen returns.
PAGE 148
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 148 ページ２０１９年１月１１日 7. Drive/Shutter Picture Selection Operations Picture Selection Slide View Screen Operations A Slide bar B Picture selection slide view C Position of displayed frame Button operation Touch operation Description of operation Selects a frame. Drag/ 21/ selection slide view, select the frame at the left/ right end and then touch [ ] or [ ]. 21 Press and hold s Continuously rewinds or forwards frame-byTouch and hold frame.
PAGE 149
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 149 ページ２０１９年１月１１日金曜日 7. Drive/Shutter Switches to marker operation. s s / Adds or deletes a marker. Displays the in-focus portion highlighted with colour ([Focus Peaking]). 0 Switches in the order of [OFF] > [ON]. s / / Saves the picture. 0 During marker operation, you can skip to set markers or the beginning or end of the 6K/4K burst file. Touching [ Button operation Touch operation ] returns to the original operation.
PAGE 150
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 150 ページ２０１９年１月１１日 7. Drive/Shutter 1/ / Performs fast-forward playback or performs frame-by-frame forwarding (while paused). 2/ / Performs fast-rewind playback or performs frame-by-frame rewinding (while paused). s Touch/drag 3421 [ Pinch out/ pinch in Enlarges or reduces the display (while paused). s Selects a frame while maintaining the enlarged display (during enlarged display). Moves the enlarged display position (during enlarged display).
PAGE 151
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 151 ページ２０１９年１月１１日金曜日 7. Drive/Shutter Selecting and Saving Pictures Using a TV Screen 0 6K burst files are output to a TV connected via HDMI at a resolution of [4K]. 0 Set [HDMI Mode (Playback)] of the [Setup] ([IN/OUT]) menu to either [AUTO] or a setting with a resolution of [4K]. (l 364) When connecting to a TV that does not support 4K videos, select [AUTO]. 0 Only the 6K/4K burst playback screen will be displayed on the TV.
PAGE 152
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 152 ページ２０１９年１月１１日 7. Drive/Shutter Recording with Time Lapse Shot Pictures are taken automatically at a set recording interval. This feature is ideal for keeping track of changes over time in subjects such as animals and plants. The pictures taken will be saved as a set of group images that can also be combined into a video. 0 Check that the clock is set correctly.
PAGE 153
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 153 ページ２０１９年１月１１日金曜日 7. Drive/Shutter [Now] [Start Time] [Start Time Set] [Image Count]/ [Shooting Interval] [Exposure Leveling] Starts recording when the shutter button is pressed fully. Starts recording at the set time. Sets the number of pictures and the recording interval to be taken. 0 [Shooting Interval] is not displayed when [Shooting Interval Setting] is set to [OFF].
PAGE 154
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 154 ページ２０１９年１月１１日 7. Drive/Shutter Operations during Time Lapse Shot Recording Pressing the shutter button halfway during sleep status will turn on the camera. 0 You can perform the following operations by pressing [Q] during Time Lapse Shot recording. [Continue] [Pause] [Resume] [End] Returns to the recording. (Only during recording) Pauses the recording. (Only during recording) Resumes the recording.
PAGE 155
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 155 ページ２０１９年１月１１日金曜日 7. Drive/Shutter Recording with Stop Motion Animation Take pictures while moving the subject little by little. The pictures taken will be saved as a set of group images that can be combined into a stop motion video. 1 2 Set the drive mode dial to [ ]. Set [Mode] to [Stop Motion Animation]. ≥ 3 ¨[ ]¨[ ] ¨ [Time Lapse/Animation] ¨ [Mode] ¨ [Stop Motion Animation] Set the recording settings.
PAGE 156
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 156 ページ 7. Drive/Shutter 4 Close the menu. 5 Start recording. ≥Press the shutter button halfway. ≥Press the shutter button fully. ≥Take pictures repeatedly while moving the subject little by little. 0 The recording screen displays up to two pictures taken previously. Use them as reference for the amount of movement. 0 You can play back the recorded stop motion images by pressing [(] during recording. Press [ ] to delete unnecessary images.
PAGE 157
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 157 ページ２０１９年１月１１日金曜日 7. Drive/Shutter 0 Group images containing pictures taken with [HLG Photo] cannot be converted to videos. 0 Up to 9999 frames can be recorded. 0 If the camera is turned off while recording, a message for resuming the recording is displayed when it is turned on. Selecting [Yes] allows you to continue the recording from the interruption point.
PAGE 158
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 158 ページ２０１９年１月１１日 7. Drive/Shutter Time Lapse Shot/Stop Motion Animation Videos After performing Time Lapse Shot or stop motion recording, you can proceed to create a video. 0 Refer to the sections below about these recording functions. – Time Lapse Shot recording: l 152 – Stop motion recording: l 155 0 You can also create videos with [Time Lapse Video] (l 371) or [Stop Motion Video] (l 371) in the [Playback] menu.
PAGE 159
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 159 ページ２０１９年１月１１日金曜日 7. Drive/Shutter 0 Videos cannot be created if the recording time exceeds 29 minutes and 59 seconds.
PAGE 160
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 160 ページ 7. Drive/Shutter Recording Using the Self-timer 1 2 Set the drive mode dial to [ ]. Decide on the composition and then adjust the focus. ≥Press the shutter button halfway. 0 The focus and exposure are fixed when the shutter button is pressed halfway. 3 Start recording. 160 DVQX1742 (ENG) ≥Press the shutter button fully. ≥The self-timer lamp blinks and then the shutter is released.
PAGE 161
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 161 ページ２０１９年１月１１日金曜日 7. Drive/Shutter Setting the Self-timer Time ¨[ ]¨[ ] ¨ Select [Self Timer] [ ] Takes a picture after 10 seconds. [ ] Takes 3 pictures at approx. 2 second intervals after 10 seconds. [ ] 0 This setting is a convenient way to avoid camera blur caused Takes a picture after 2 seconds. by pressing the shutter button. 0 We recommend using a tripod when recording with the self-timer.
PAGE 162
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 162 ページ２０１９年１月１１日 7. Drive/Shutter Bracket Recording When the shutter button is pressed, the camera can record multiple images while automatically changing the setting value for exposure, aperture, focus or white balance (adjustment value or colour temperature).
PAGE 163
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 163 ページ２０１９年１月１１日金曜日 7. Drive/Shutter Setting Items ([Bracketing Type]) [ ] Exposure Bracket When the shutter button is pressed, the camera records while changing the exposure. (l 165) [ ] Aperture Bracket When the shutter button is pressed, the camera records while changing the aperture value. (l 165) [ ] Focus Bracket When the shutter button is pressed, the camera records while changing the focus position.
PAGE 164
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 164 ページ２０１９年１月１１日 7. Drive/Shutter 0 Only Exposure Bracket is available when [Aspect Ratio] is set to [65:24] or [2:1]. 0 White Balance Bracket and White Balance Bracket (Colour Temperature) are not available when using the following functions: – [iA] mode – Taking burst pictures – [RAWiFINE]/[RAWiSTD.
PAGE 165
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 165 ページ２０１９年１月１１日金曜日 7. Drive/Shutter [More Settings] (Exposure Bracket) Sets the image count and exposure compensation step. [3•1/3] (record 3 images in 1/3 EV steps) to [7•1] (record 7 images in 1 EV steps) [Step] [Sequence] Sets the order in which images are recorded. [Single Shot Setting] [ ]: Takes only one image each time the shutter button is pressed. [ ]: Takes all of the set number of images when the shutter button is pressed once.
PAGE 166
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 166 ページ２０１９年１月１１日 7. Drive/Shutter [More Settings] (Focus Bracket) Sets the focus adjustment step. [Step] 0 The distance that the focus position is moved becomes shorter if the initial focus position is close, and longer if it is far away. [Image Count] [Sequence] Sets the image count. 0 This cannot be set when taking burst pictures. Burst pictures are taken while the shutter button is pressed.
PAGE 167
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 167 ページ２０１９年１月１１日金曜日 7. Drive/Shutter [More Settings] (White Balance Bracket) Rotate , or to set the correction step and then press G or . Rotate to the right: Horizontal direction ([A] to [B]) Rotate to the left: Vertical direction ([G] to [M]) 0 The correction step can also be set by touching [ ]/[ ]/[ ]/[ ]. A B M [More Settings] (White Balance Bracket (Colour Temperature)) Rotate , or to set the correction step and then press or .
PAGE 168
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 168 ページ２０１９年１月１１日 7. Drive/Shutter Post-Focus Recording Taking burst pictures with the same image quality as 6K/4K photos while automatically changing the focus position. You can select the focus position for the picture to save after recording. Also Focus Stacking lets you combine images with multiple focus positions. This function is suitable for subjects that do not move. Perform burst 6K/4K photo recording while automatically shifting the focus.
PAGE 169
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 169 ページ２０１９年１月１１日金曜日 7. Drive/Shutter 2 3 Close the menu. ≥Press the shutter button halfway. Decide on the composition and then adjust the focus. ≥Press the shutter button halfway. ≥AF detects the focus position on the screen. (Excluding the edges of the screen) 60 F4.0 ±0 ISO10  0 If no areas on the screen can be brought into focus, the focus indication (A) blinks and recording is not possible.
PAGE 170
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 170 ページ２０１９年１月１１日 7. Drive/Shutter Limitations on Post-Focus Recording 0 Since recording is performed with the same image quality as 6K/4K photos, limitations apply to recording functions and menus. For details, refer to “Camera Settings for 6K/4K Photo” on page 143. 0 In addition to the limitations of 6K/4K photos, focus settings cannot be changed during Post-Focus recording.
PAGE 171
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 171 ページ２０１９年１月１１日金曜日 7. Drive/Shutter Selecting the Focus Position for the Picture to Save 1 Select a Post-Focus image on the playback screen. (l 267) ≥Select an image with the [ ] icon and then press 3. ≥You can also perform the same operation by touching the [ ] icon. 2 Touch the point to be brought into focus. 0 When the point is in focus, a green frame appears. 0 If there is no picture with the selected 3 point in focus, a red frame appears.
PAGE 172
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 172 ページ２０１９年１月１１日 7. Drive/Shutter Focus Position Selection Operations Button operation Touch operation 3421/ / Touch Description of operation Selects a focus position. 0 Selection is not possible during enlarged display. Enlarges the display. 0 During enlarged display, you can fine-adjust the focus by dragging the slide bar. (You can also perform the same operation by pressing 21.) Reduces the display (during enlarged display).
PAGE 173
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 173 ページ２０１９年１月１１日金曜日 7. Drive/Shutter Focus Stacking Save a picture with multiple focus positions merged. A Focus: closer B Focus: more distant 1 On the screen for selecting the focus position in Step 2 on page 171, touch [ ]. ≥You can also perform the same operation by pressing [ ]. 2 Select the merging method. [Auto Merging] Automatically selects pictures suitable for merging and then merges them into a single picture.
PAGE 174
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 174 ページ２０１９年１月１１日 7. Drive/Shutter 3 (When [Range Merging] is selected) Touch the points to be brought into focus. 6HW &DQFHO 0 Select at least two points. 4 174 Selected points are indicated with a green frame. 0 The in-focus range between the two selected points is displayed in green. 0 Ranges that cannot be selected are displayed in grey. 0 To cancel the selection, touch a point with a green frame again. 0 To select consecutive points, drag the screen.
PAGE 175
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 175 ページ２０１９年１月１１日金曜日 7. Drive/Shutter Operations when [Range Merging] is Selected Button operation Touch operation 3421 / / / Touch [ ] Selects a point. [Set/Cancel] Sets or cancels a point. [All] Selects all points. (Before selecting points) [DISP.] [Reset] / Description of operation Cancels all selections. (After selecting points) Merges the pictures and saves the resulting picture.
PAGE 176
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 176 ページ２０１９年１月１１日 7. Drive/Shutter [Silent Mode] This disables all operation sounds and light output at once. The audio from the speaker will be muted and the flash and the AF assist lamp will be set to forced off mode. 0 The following settings are fixed: – – – – – – [Flash Mode]: [Œ] (Forced Flash Off) [AF Assist Light]: [OFF] [Shutter Type]: [ELEC.
PAGE 177
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 177 ページ２０１９年１月１１日金曜日 7. Drive/Shutter [Shutter Type] Select the shutter type to use for taking pictures. ¨[ ]¨[ ] ¨ Select [Shutter Type] [AUTO] Switches the shutter type automatically depending on the recording conditions and shutter speed. [MECH.] Records with the mechanical shutter type. [EFC] [ELEC.] [ELEC.+NR] Mechanism Records with the electronic front curtain type. Records with the electronic shutter type. Records with the electronic shutter type.
PAGE 178
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 178 ページ２０１９年１月１１日 7. Drive/Shutter 0 The electronic front curtain type reduces blur caused by the shutter because the amount of vibration from the shutter is small compared to the mechanical shutter type. 0 The electronic shutter type allows you to record without vibration from the shutter. 0 When [ 0 0 0 0 ] is displayed on the screen, recording will be with the electronic shutter type.
PAGE 179
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 179 ページ２０１９年１月１１日金曜日 7. Drive/Shutter Image Stabiliser The camera can use both the in-body image stabiliser and the in-lens image stabiliser. Of the Dual I.S. modes that effectively combine two image stabilisers, this supports Dual I.S.2 ( , ) with high correction efficiency. Furthermore, during video recording, you can use the 5-Axis Hybrid Image Stabiliser that incorporates electronic stabilisation.
PAGE 180
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 180 ページ２０１９年１月１１日 7. Drive/Shutter Using the Image Stabiliser 0 When using a lens with an O.I.S. switch, set it to [ON]. 0 When using lenses without a function for communicating with this camera, a message asking you to check the focal length setting is displayed after you turn on the camera. Correctly operating the image stabilisation function requires that the focal length be set to match the attached lens.
PAGE 181
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 181 ページ２０１９年１月１１日金曜日 7. Drive/Shutter Image Stabiliser Settings Set the image stabiliser movement to match the recording situation. ¨[ ]¨[ [Operation Mode] [Body(B.I.S.) / Lens(O.I.S.)] ] ¨ Select [Image Stabilizer] Sets the stabilisation movement (blur) to match the recording method (normal, panning). (l 182) ([Body]) Uses the in-body image stabiliser. ([Lens]) Uses the in-lens image stabiliser.
PAGE 182
DC-S1E-DVQX1742_eng.book 182 ページ２０１９年３月１５日金曜日午前１１時４８分 7. Drive/Shutter 0 When the following functions are being used, [When to Activate] is fixed to [ALWAYS]: –[ ] ([Body(B.I.S.) / Lens(O.I.S.
PAGE 183
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 183 ページ２０１９年１月１１日金曜日 7. Drive/Shutter 0 You can register functions to Fn buttons: [ ]¨[ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Image Stabilizer] (l 286) [Boost I.S. (Video)] Increase the effectiveness of the image stabiliser during video recording. This effect can help provide a stable composition when you want to perform recording from a fixed perspective. Settings: [ON]/[OFF] 0 When [Boost I.S.
PAGE 184
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 184 ページ２０１９年１月１１日 7. Drive/Shutter [Focal Length Set] When using lenses without a function for communicating with this camera, manually set the focal length inscribed on the lens. Up to three focal length settings can be registered. Registered focal length settings can be called. Entering focal length input A Enter the focal length. 21: Select 34: Select a numeric value. or : Confirm 0 0.1 mm to 1000 mm can be set. Register the entered focal length.
PAGE 185
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 185 ページ 8. ２０１９年１月１１日金曜日 Metering/Exposure/ISO Sensitivity [Metering Mode] Type of optical measurement to measure brightness can be changed. ¨[ ]¨[ ] ¨ Select [Metering Mode] (Multi-metering) Method in which the most suitable exposure is measured by judging the allocation of brightness on the whole screen. (Centre-weighted) Method used to perform measuring which focuses on the centre of the screen.
PAGE 186
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 186 ページ２０１９年１月１１日 8. Metering/Exposure/ISO Sensitivity Programme AE Mode In [P] mode (Programme AE mode), the camera automatically sets the shutter speed and aperture value for the brightness of the subject. You can also use Programme Shift to change combinations of shutter speed and aperture values while keeping the same exposure. 1 2 Set the mode dial to [P]. Press the shutter button halfway.
PAGE 187
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 187 ページ２０１９年１月１１日金曜日 8. Metering/Exposure/ISO Sensitivity Programme Shift You can change the shutter speed and aperture value combination set automatically by the camera while maintaining the same exposure. With this, you can, for example, make the background more defocused by decreasing the aperture value or capture a moving subject more dynamically by slowing the shutter speed. 1 Press the shutter button halfway.
PAGE 188
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 188 ページ２０１９年１月１１日 8. Metering/Exposure/ISO Sensitivity Aperture-Priority AE Mode In [A] mode (Aperture-Priority AE mode), you can set the aperture value before recording. The shutter speed will be automatically set by the camera. Smaller aperture values Larger aperture values It becomes easier to defocus the background. It becomes easier to bring everything into focus including the background. 1 Set the mode dial to [A]. 2 Set the aperture value.
PAGE 189
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 189 ページ２０１９年１月１１日金曜日 8. Metering/Exposure/ISO Sensitivity Depth of Field Characteristics ¢1 Aperture value Small Focal length of lens Tele Wide Distance to subject Near More distant Depth of field (area in sharp focus) Shallow (narrow) Example: When you want to take a image with a defocused background. Large Deep (wide) Example: When you want to take a image with focus as far as the background.
PAGE 190
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 190 ページ２０１９年１月１１日 8. Metering/Exposure/ISO Sensitivity Shutter-Priority AE Mode In [S] mode (Shutter-Priority AE mode), you can set the shutter speed before recording. The aperture value will be automatically set by the camera. Slower shutter speeds Faster shutter speeds It becomes easier to capture motion It becomes easier to freeze motion 1 Set the mode dial to [S]. 2 Set the shutter speed. 3 Start recording. ≥Rotate or .
PAGE 191
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 191 ページ２０１９年１月１１日金曜日 8. Metering/Exposure/ISO Sensitivity 0 The effects of the set aperture value and shutter speed will not be visible on the recording screen. To check the effects on the recording screen, use [Preview]. (l 195) 0 The brightness of the recording screen and of actual recorded images may differ. Check the images on the playback screen. 0 Shutter speeds faster than 1/320 of a second are not available when you fire the flash.
PAGE 192
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 192 ページ２０１９年１月１１日 8. Metering/Exposure/ISO Sensitivity Manual Exposure Mode In [M] mode (Manual Exposure mode), you can take pictures by manually setting the aperture value and shutter speed. In default settings, the ISO sensitivity is set to [AUTO]. As a result, the ISO sensitivity will be adjusted according to the aperture value and shutter speed. Exposure compensation can also be used when ISO sensitivity is set to [AUTO]. 1 2 Set the mode dial to [M].
PAGE 193
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 193 ページ２０１９年１月１１日金曜日 8. Metering/Exposure/ISO Sensitivity Available Shutter Speeds (Sec.) [MECH.] [B] (Bulb, max. approx. 30 minutes), 60 to 1/8000 [EFC] [B] (Bulb, max. approx. 30 minutes), 60 to 1/2000 [ELEC.] [B] (Bulb, max. approx. 60 seconds), 60 to 1/8000 0 The effects of the set aperture value and shutter speed will not be visible on the recording screen. To check the effects on the recording screen, use [Preview].
PAGE 194
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 194 ページ２０１９年１月１１日 8. Metering/Exposure/ISO Sensitivity [B] (Bulb) If you set the shutter speed to [B] (Bulb), the shutter stays open while the shutter button is pressed fully. (up to approx. 30 minutes) The shutter closes when the shutter button is released. Use this when you want to keep the shutter open for a long time to record images of fireworks, night scenery or a starry sky.
PAGE 195
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 195 ページ２０１９年１月１１日金曜日 8. Metering/Exposure/ISO Sensitivity Preview Mode You can check the effects of aperture on the recording screen by physically closing the aperture blades of the lens to the aperture value set for actual recording. In addition to the effects of aperture, you can check the effects of shutter speed at the same time. 0 Use the Fn button registered with [Preview] to operate. In default settings, this is registered in [Fn2].
PAGE 196
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 196 ページ２０１９年１月１１日 8. Metering/Exposure/ISO Sensitivity Exposure Compensation You can compensate the exposure when the correct exposure determined by the camera is too bright or too dark. You can adjust the exposure in 1/3 EV steps in a range of n5 EV. When recording videos or recording with 6K/4K Photo or Post-Focus, the range changes to n3 EV. 1 2 Press [ ]. Compensate the exposure. ≥Rotate [ ], [ ], or [ ].
PAGE 197
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 197 ページ２０１９年１月１１日金曜日 8. Metering/Exposure/ISO Sensitivity 0 In [M] mode, you can compensate the exposure by setting the ISO sensitivity to [AUTO]. 0 When [Auto Exposure Comp.] is set to [ON], the flash output will automatically be set to the level appropriate to the exposure compensation. 0 When the exposure compensation value falls below or exceeds n3 EV, the brightness of the recording screen will no longer change.
PAGE 198
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 198 ページ２０１９年１月１１日 8. Metering/Exposure/ISO Sensitivity Locking Focus and Exposure (AF/AE Lock) Lock the focus and exposure in advance to take pictures with the same focus and exposure settings while changing the composition. This is useful when you want to bring an edge of the screen into focus or there is a backlight, for example. 1 Register [AE LOCK], [AF LOCK], or [AF/AE LOCK] to the Fn button. (l 286) 0 These cannot be registered to [Fn3] to [Fn7].
PAGE 199
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 199 ページ２０１９年１月１１日金曜日 8. Metering/Exposure/ISO Sensitivity Setting the ISO Sensitivity You can set light sensitivity (ISO sensitivity). With the default settings, you can set ISO100 to 51200 in 1/3 EV increments. The range that can be set will differ depending on the functions used. 1 2 1 Press [ISO]. Select ISO sensitivity. 2 ≥Rotate , , or . ≥Selection is also possible by pressing [ISO]. 2 2 ISO 3 ISO AUTO 100 200 40 Confirm your selection.
PAGE 200
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 200 ページ２０１９年１月１１日 8. Metering/Exposure/ISO Sensitivity Setting Items (ISO Sensitivity) [AUTO] The ISO sensitivity is automatically adjusted according to the brightness. Confirm ISO sensitivity by pressing the shutter button halfway. 0 Taking picture: Maximum [ISO6400]¢1 0 Video recording: Maximum [ISO6400]¢2 [100] to [51200] The ISO sensitivity is fixed at the selected value. 0 You can extend the ISO sensitivity range in between a lower limit of L.
PAGE 201
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 201 ページ 9. ２０１９年１月１１日金曜日 White Balance/Image Quality Setting the White Balance (WB) White balance (WB) is a function that corrects the colour cast produced by the light illuminating the subject. It corrects the colours so that white objects appear in white to make the overall colour closer to what is seen by the eye. Normally, you can use auto ([AWB], [AWBc] or [AWBw]) to obtain the optimal white balance.
PAGE 202
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 202 ページ２０１９年１月１１日 9. White Balance/Image Quality 3 Confirm your selection. ≥Press the shutter button halfway.
PAGE 203
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 203 ページ２０１９年１月１１日金曜日 9. White Balance/Image Quality 1 [AWB] will work within this range. 2 Blue sky 3 Cloudy sky (Rain) 4 Shade 5 Sunlight 6 White fluorescent light 7 Incandescent light bulb 8 Sunrise and sunset 9 Candlelight KlKelvin Colour Temperature 0 Under fluorescent lighting, LED lighting fixture, etc., the appropriate white balance will vary depending on the lighting type. Use [AWB], [AWBc], [AWBw] or [ 1 ] to [ 4 ].
PAGE 204
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 204 ページ２０１９年１月１１日 9. White Balance/Image Quality White Sets ([ 1 ] to [ 4 ]) Take pictures of a white object under the light source of the recording location to adjust the white balance until it appears white. 1 Press [WB] and then select any value from [ 1 ] to [ 4 ]. 2 Press 3. 3 Aim the camera at a white object so that it appears inside the frame at the centre of the screen and then press or .
PAGE 205
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 205 ページ２０１９年１月１１日金曜日 9. White Balance/Image Quality 2 Select the white balance and then press 4. 3 Adjust the colouring. ≥The adjustment screen is displayed. 2: 3: 1: 4: G [A] (AMBER: ORANGE) [G] (GREEN: GREENISH) [B] (BLUE: BLUISH) [M] (MAGENTA: REDDISH) A B M 0 You can also make adjustments in diagonal directions by using the joystick. 0 You can also touch the graph to make adjustments. 0 Press [DISP.] to return to the unadjusted state.
PAGE 206
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 206 ページ２０１９年１月１１日 9. White Balance/Image Quality [Photo Style] You can select the finishing settings of images to suit your subjects and expression styles. The image quality can be adjusted for each Photo Style. ¨[ 206 ]¨[ ] ¨ Select [Photo Style] [Standard] The standard setting. [Vivid] A setting that produces a more vivid quality with higher saturation and contrast. [Natural] A setting that produces a softer quality with lower contrast.
PAGE 207
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 207 ページ２０１９年１月１１日金曜日 9. White Balance/Image Quality A setting that minimises overexposure by applying a gamma curve correction equivalent to Rec.709 to perform compression (knee adjustment) of high-luminance areas. 0 Rec.709 is an abbreviation of “ITU-R Recommendation BT.709”, a standard for highdefinition broadcasting. [Like709] [Standard(HLG)]¢1 A setting used to record [HLG Photo]. [Monochrome(HLG)] A setting used to record [HLG Photo] in monochrome.
PAGE 208
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 208 ページ２０１９年１月１１日 9. White Balance/Image Quality Adjusting the Image Quality 1 Press 21 to select the type of Photo Style. 2 Press 34 to select an item and then 6WDQGDUG press 21 to adjust. 0 Adjusted items are indicated with [¢]. 3 Press or . 0 When the image quality is adjusted, the Photo Style icon on the recording screen is indicated with [¢]. -5 0 +5 ±0 ±0 ±0 ±0 ±0 Settings Items (Picture Mode) [Contrast]¢1 Adjusts the contrast in the image.
PAGE 209
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 209 ページ２０１９年１月１１日金曜日 9. White Balance/Image Quality [Grain Effect]¢4 [Low]/ [Standard]/ [High] [Sharpness] Adjusts the outlines in the image. [Noise Reduction] Adjusts the noise reduction effect. 0 Increasing the effect may cause a slight drop in picture resolution. Sets the grain effect level. [Off] S s [Sensitivity]¢5 Sets the ISO sensitivity. (l 199) [White Balance]¢5 Sets the white balance.
PAGE 210
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 210 ページ２０１９年１月１１日 9. White Balance/Image Quality Registering Settings in My Photo Style 1 Press 21 to select the type of Photo Style. 2 Adjust the image quality. 0 My Photo Style displays the types of Photo Style at the top of image quality adjustment. Select the base Photo Style. 3 Press [DISP.]. 4 (When [MY PHOTO STYLE 1] to [MY PHOTO STYLE 10] is selected) Press 34 to select [Save Current Setting] and then press .
PAGE 211
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 211 ページ２０１９年１月１１日金曜日 9. White Balance/Image Quality [Filter Settings] This mode records with additional image effects (filters). You can adjust the effect for each filter. In addition, you can simultaneously take pictures without effects. 1 Set the [Filter Effect]. 2 Select the filter. ≥ ¨[ ]¨[ ] ¨ [Filter Settings] ¨ [Filter Effect] ¨ [SET] 1/8 ≥Press 34 to select, and then press or .
PAGE 212
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 212 ページ２０１９年１月１１日 9.
PAGE 213
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 213 ページ２０１９年１月１１日金曜日 9. White Balance/Image Quality Setting a Filter with Touch Operation 0 The default settings are for the touch tab to not be displayed. Set the [Touch Tab] in [Touch Settings] to [ON]. (l 340) 1 Touch [ ]. EXPS 2 Touch the item to set. [ EXPS ]: Filter on/off [ ]: Filter [ ]: Filter effect adjustment 0 White balance will be fixed to [AWB] and the flash will be fixed to [Œ] (Forced Flash Off).
PAGE 214
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 214 ページ２０１９年１月１１日 9. White Balance/Image Quality Setting the Type of Defocus ([Miniature Effect]) 1 Set [Filter Effect] to [Miniature Effect]. 2 Press 3 to display the setting screen. 0 The setting screen can also be displayed by touching [ ] then [ ]. 3 Press 34 or 21 to move the infocus portion. 0 You can also move the in-focus portion by touching the screen. 0 You can also switch the defocus orientation by touching [ ].
PAGE 215
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 215 ページ２０１９年１月１１日金曜日 9. White Balance/Image Quality Setting the Colour to Be Left ([One Point Color]) 1 Set [Filter Effect] to [One Point Color]. 2 Press 3 to display the setting screen. 0 The setting screen can also be displayed by touching [ ] then [ ]. 3 Press 3421 to move the frame and select the colour you want to leave. 0 Positions can be moved to the diagonal directions using the joystick.
PAGE 216
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 216 ページ２０１９年１月１１日 9. White Balance/Image Quality [Simultaneous Record w/o Filter] You can simultaneously take pictures with no added filter effects. ¨[ ]¨[ ] ¨ [Filter Settings] ¨ Select [Simultaneous Record w/ o Filter] Settings: [ON]/[OFF] 0 [Simultaneous Record w/o Filter] is not available when using the following functions: – Burst recording – [6K/4K PHOTO]/[Post-Focus] – [Time Lapse Shot] – [Stop Motion Animation] – [RAWiFINE]/[RAWiSTD.
PAGE 217
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 217 ページ２０１９年１月１１日金曜日 9. White Balance/Image Quality [High Resolution Mode] This merges pictures with a high resolution from multiple recorded images. This function is suitable for recording subjects that do not move. Merged pictures will be saved as RAW files with a maximum image size of 96 M. 0 Use a tripod to minimise camera shake. 0 The image stabilisation function is automatically turned off. 1 Set [High Resolution Mode]. 2 Start High Resolution mode.
PAGE 218
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 218 ページ２０１９年１月１１日 9. White Balance/Image Quality 3 Decide on the composition and then fix the camera in place. 0 If blurring is detected, the High Resolution mode icon A blinks. 4 Start recording. ≥Press the shutter button fully. 0 With the default settings, [Shutter Delay] is activated, so there will be a gap in time from when the shutter button is pressed until the shutter is released. 0 The screen goes dark during recording.
PAGE 219
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 219 ページ２０１９年１月１１日金曜日 9. White Balance/Image Quality Setting Items ([High Resolution Mode]) [Start] Starts High Resolution mode. [Simul Record Normal Shot] Simultaneously takes pictures that are not merged when [ON] is set. The first picture will be saved with [Picture Size] set to [L]. [Shutter Delay] Sets the delay time from when the shutter button is pressed until the shutter is released.
PAGE 220
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 220 ページ２０１９年１月１１日 9. White Balance/Image Quality 0 In [High Resolution Mode], the following functions are restricted: 0 0 0 0 0 0 – [Shutter Type]: Fixed to [ELEC.
PAGE 221
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 221 ページ２０１９年１月１１日金曜日 9. White Balance/Image Quality [HLG Photo] Records an HLG format picture with a wide dynamic range. Bright lights that are easily overexposed, and dark areas that are easily underexposed can be recorded showing fine quality and rich colours just as seen with the human eyes. Recorded pictures can be output over HDMI to devices (TV, etc.) that support HLG format pictures for viewing.
PAGE 222
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 222 ページ２０１９年１月１１日 9. White Balance/Image Quality 0 The monitor and viewfinder on this camera do not support display of HLG format images. With [HLG View Assist] in the [Custom] ([Monitor / Display]) menu, you can display images that have been converted for confirmation on the monitor/ viewfinder of the camera or a device connected via HDMI. (l 354) 0 HLG images appear darker on devices that do not support the HLG format. 0 When using APS-C lenses, [Full-Res.
PAGE 223
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 223 ページ２０１９年１月１１日金曜日 10. Flash Using an External Flash (Optional) If you attach the Flash (DMW-FL580L/DMW-FL360L/DMW-FL200L: optional) to the hot shoe, you can record using the flash. You can also use a commercially available external flash by connecting a commercially available synchro cable to the flash synchro socket.
PAGE 224
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 224 ページ２０１９年１月１１日 10. Flash Connecting a Synchro Cable to the Flash Synchro Socket You can use a commercially available external flash by connecting a commercially available synchro cable to the flash synchro socket. The socket has a lock screw to prevent the cable from falling off. Before connecting the synchro cable to the flash synchro socket, remove the flash synchro socket cap. 0 Use an external flash with a synchronisation voltage of 400 V or less.
PAGE 225
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 225 ページ２０１９年１月１１日金曜日 10. Flash Notes on Flash Recording 0 Do not bring any object near the flash. Heat or light may cause the object to deform or discolour. 0 If you record repeatedly, time may be needed to charge the flash. While the flash is charging, images will be recorded without the flash firing. 0 When an external flash is attached, do not carry the camera by holding only the external flash. It may become detached.
PAGE 226
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 226 ページ２０１９年１月１１日 10. Flash Setting Flash Functions You can set the flash function to control flash firing from the camera. [Firing Mode]/[Manual Flash Adjust.] You can select whether to set the flash output automatically or manually. When setting the flash output manually, you can set it on the camera. 0 Firing mode cannot be set when using a Flash (DMW-FL580L/DMW-FL360L/ DMW-FL200L: optional).
PAGE 227
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 227 ページ２０１９年１月１１日金曜日 10. Flash 2 3 (When set to [MANUAL]) Select [Manual Flash Adjust.] and then press or . Press 21 to set the flash output and then press or . 0 It can be set within the range of [1/1] (full flash output) to [1/64] in 1/3 steps. [Flash Mode] Set the flash mode.
PAGE 228
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 228 ページ２０１９年１月１１日 10. Flash (Forced Flash On) [‰] [ ] [ ] [ (Slow Sync.) ] [Œ] The flash fires every time regardless of the recording conditions. (Forced On/Red- This is suitable for recording when there is backlighting or under lighting such as fluorescent light. Eye) (Slow Sync./ Red-Eye) (Forced Flash Off) When recording images against a dark background landscape, this feature will slow the shutter speed when the flash fires.
PAGE 229
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 229 ページ２０１９年１月１１日金曜日 10. Flash Available flash settings by recording mode The available flash settings depend on the recording mode. (3: Available, —: Not available) Recording mode ‰ Œ [P]/[A] 3 3 3 3 3 [S]/[M] 3 3 — — 3 0 In [iA] mode, this will be either [ ]. Shutter speeds for flash modes [Flash Mode] ‰ Shutter speed (sec.) 1/60¢1 to 1/320¢2 1 to 1/320¢2 ¢1 In [S] mode, this will be 60 seconds and in [M] mode it will be B (Bulb).
PAGE 230
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 230 ページ２０１９年１月１１日 10. Flash [Flash Synchro] When a moving subject is recorded at night using a slow shutter and flash, a trail of light may appear in front of the subject. If you set [Flash Synchro] to [2ND], you can take a dynamic picture with a trail of light appearing behind the subject by firing the flash immediately before the shutter closes. ¨[ ]¨[ Synchro] [1ST] [2ND] ] ¨ Select [Flash This is the normal method for recording with the Flash.
PAGE 231
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 231 ページ２０１９年１月１１日金曜日 10. Flash Adjusting the Flash Output You can adjust the flash output when taking pictures with the flash in TTL output mode. 1 Select [Flash Adjust.]. ≥ 2 ¨[ Adjust.] ]¨[ ] ¨ [Flash Press 21 to adjust the flash output and then press or . 0 It can be adjusted within the range of [j3 EV] to [i3 EV] in 1/3 EV steps. 0 [ ] is displayed on the recording screen.
PAGE 232
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 232 ページ２０１９年１月１１日 10. Flash [Auto Exposure Comp.] Automatically adjust the flash output in conjunction with the exposure compensation value. (l 196) ¨[ ]¨[ ] ¨ Select [Auto Exposure Comp.] Settings: [ON]/[OFF] [Red-Eye Removal] When [Flash Mode] is set to [ ] or [ ], the camera automatically detects red-eye and corrects image data. ¨[ ]¨[ ] ¨ Select [Red-Eye Removal] Settings: [ON]/[OFF] 0 When [ON] is set, [ ] is displayed on the flash icon.
PAGE 233
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 233 ページ２０１９年１月１１日金曜日 10. Flash Recording Using a Wireless Flash You can use a Flash (DMW-FL580L/DMW-FL360L/DMW-FL200L: optional) to record using a wireless flash. You can separately control the firing of three flash groups and the flash attached to the hot shoe of the camera. Placing a Wireless Flash Place the wireless flash with its wireless sensor facing the camera.
PAGE 234
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 234 ページ 10. Flash 1 2 Attach an external flash to the camera. (l 223) Set the wireless flashes to [RC] mode and then place them. 0 Set the channel and group for the wireless flashes. 3 Enable the wireless flash function of the camera. ≥ 4 ¨[ ¨ [ON] ]¨[ ] ¨ [Wireless] Set [Wireless Channel]. 0 Select the same channel as on the wireless flash side. 5 234 Set [Wireless Setup]. 0 Set the firing mode and flash output.
PAGE 235
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 235 ページ２０１９年１月１１日金曜日 10. Flash Setting Items ([Wireless Setup]) 0 To fire a test flash, press [DISP.]. [External Flash]¢1 [A Group]/ [B Group]/ [C Group] [Firing Mode] [TTL]: The camera automatically sets the flash output. [AUTO]¢2: Sets the flash output on the external flash side. [MANUAL]: Sets the flash output of the external flash manually. [OFF]: The external flash outputs only communication light. [Flash Adjust.
PAGE 236
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 236 ページ２０１９年１月１１日 10. Flash 0 You can register functions to Fn buttons: [ ]¨[ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Wireless Flash Setup] (l 286) [Wireless FP] The external flash performs FP firing (repeated high-speed firing of the flash) during wireless recording, enabling recording using the Flash even at fast shutter speeds. ¨[ ]¨[ ] ¨ Select [Wireless FP] Settings: [ON]/[OFF] [Communication Light] Set the strength of communication light.
PAGE 237
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 237 ページ２０１９年１月１１日金曜日 11. Recording Videos Recording Videos This camera can record 4K videos in MP4 format and full high-definition videos that comply with the AVCHD standard. Furthermore, the Creative Video mode, especially created for video recording, enables you to record using settings for exposure, white balance, etc., especially suited to video.
PAGE 238
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 238 ページ２０１９年１月１１日 11. Recording Videos 0 The available recording time can be displayed during recording standby: ]¨[ [ ] ¨ [Photos/Videos Remaining] (l 352) 0 You can switch the live view angle of view to the angle of view for video recording: [ ]¨[ ] ¨ [Photo/Video Preview] (l 351) Exposure Control While Video Recording Videos will be recorded using the aperture, shutter speed, and ISO sensitivity settings below.
PAGE 239
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 239 ページ２０１９年１月１１日金曜日 11. Recording Videos 0 If an operation such as a zoom or button operation is performed during video recording, that operation sound may be recorded. 0 The functions available during the video recording differ depending on the lens you are using. Also, the lens operation sound may be recorded. 0 If the operation sound of pressing the video rec.
PAGE 240
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 240 ページ２０１９年１月１１日 11. Recording Videos Video Settings [Rec. File Format] Sets the video recording file format. ¨[ [AVCHD] ]¨[ ] ¨ Select [Rec. File Format] This data format is suitable for playback on high-definition TVs. 0 AVCHD videos cannot be recorded to XQD cards. [MP4] This data format is suitable for playback on PCs. [MP4 HEVC] This HLG video data format is suitable for playback on TVs that support HDR (HLG format).
PAGE 241
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 241 ページ２０１９年１月１１日金曜日 11. Recording Videos [Rec Quality] Sets the video recording image quality. This camera can record videos in 4K (3840k2160) or full high-definition (1920k1080) resolution. The image quality settings that can be selected vary depending on the [Rec. File Format] setting. ¨[ ]¨[ ] ¨ Select [Rec Quality] [Rec.
PAGE 242
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 242 ページ２０１９年１月１１日 11. Recording Videos [Rec.
PAGE 243
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 243 ページ２０１９年１月１１日金曜日 11. Recording Videos 0 All videos will be recorded using Long GOP to compress the images. 0 The higher the bit rate value is, the higher the image quality becomes. Since the camera employs the VBR recording format, the bit rate is changed automatically depending on the subject to record. As a result, the available recording time is shortened when a fast-moving subject is recorded.
PAGE 244
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 244 ページ２０１９年１月１１日 11. Recording Videos Size Interval for Dividing Files [Rec. File Format] [Rec Quality] [AVCHD] All FHD A new file will be created to continue recording if the continuous recording time exceeds 30 minutes or the file size exceeds 4 GB. [MP4] 4K [MP4 HEVC] 244 DVQX1742 (ENG) Size interval for dividing files A new file will be created to continue recording if the file size exceeds 4 GB. The files recorded can be played back continuously.
PAGE 245
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 245 ページ２０１９年１月１１日金曜日 11. Recording Videos [Image Area of Video] Set the image area during video recording. The angle of view differs depending on the image area. Narrowing the image area allows you to achieve a telescopic effect without image deterioration. ¨[ ]¨[ Item ] ¨ Select [Image Area of Video] Settings details [FULL] Records with the full sensor area. [APS-C] Records using a range corresponding to the APS-C lens image circle.
PAGE 246
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 246 ページ２０１９年１月１１日 11. Recording Videos Image area (Ex.: FHD video) FULL APS-C PIXEL/PIXEL 0 When the following functions are being used, [Image Area of Video] is fixed to [APS-C]: – [4K/LPCM/150M/60p]/[4K/LPCM/150M/50p] ([Rec Quality]) – [60/30p 4K]/[50/25p 4K]/[48/23.
PAGE 247
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 247 ページ２０１９年１月１１日金曜日 11. Recording Videos 0 If you press the shutter button halfway while recording a video, the camera will re-adjust the focus. 0 Depending on the recording conditions or lens used, the AF operation sound may be recorded during video recording. If the operation sound bothers you, we recommend recording with [Continuous AF] set to [OFF]. 0 If the zoom is operated while recording videos, the subject may take a while to come into focus.
PAGE 248
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 248 ページ２０１９年１月１１日 11. Recording Videos [Luminance Level] You can set the luminance range to suit the purpose of video recording. 0 This can be set when [Rec. File Format] is set to [MP4]. ¨[ ]¨[ ] ¨ Select [Luminance Level] Settings: [0-255]/[16-255] 0 This is fixed to [16-255] when [Rec. File Format] is set to [AVCHD], and [64-940] when set to [MP4 HEVC]. 0 This is fixed to [64-940] when recording [HLG Photo] and to [0-255] when taking other types of pictures.
PAGE 249
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 249 ページ２０１９年１月１１日金曜日 11. Recording Videos 2 Press [Q]. 3 Select a knee setting. $872 ≥Press 21 to select a setting item. Adjusts the compression levels of high-luminance areas automatically. [AUTO] Allows you to adjust the master knee point and master knee slope manually. [MANUAL] Press 34 to select an item and then press 21 to adjust.
PAGE 250
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 250 ページ２０１９年１月１１日 11. Recording Videos Displaying/Setting the Sound Recording Level [Sound Rec Level Disp.] The sound recording level is displayed on the recording screen. ¨[ ]¨[ ] ¨ Select [Sound Rec Level Disp.] Settings: [ON]/[OFF] 0 When [Sound Rec Level Limiter] is set to [OFF], [Sound Rec Level Disp.] is fixed to [ON]. 0 You can register functions to Fn buttons: [ ]¨[ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Sound Rec Level Disp.
PAGE 251
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 251 ページ２０１９年１月１１日金曜日 11. Recording Videos Creative Video Mode The [ ] mode (Creative Video mode) is a recording mode used exclusively for video recording. In this mode, you can perform the same exposure operations as in [P]/[A]/[S]/[M] modes. Change the exposure and audio settings with touch operation to prevent operation sounds from being recorded. Settings such as exposure and white balance can be changed independent of picture taking settings.
PAGE 252
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 252 ページ２０１９年１月１１日 11. Recording Videos 0 You can register functions to Fn buttons: [ ]¨[ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Exposure Mode] (l 286) 0 You can set the upper and lower limits for ISO auto when recording in Creative Video mode. [ ]¨[ ] ¨ [ISO Sensitivity (video)] (l 326) Operations During Video Recording Change the exposure and audio settings with touch operation to prevent operation sounds from being recorded.
PAGE 253
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 253 ページ２０１９年１月１１日金曜日 11. Recording Videos [CreativeVideo Combined Set.] In default settings, settings such as exposure and white balance changed in [ ] mode are also reflected in picture recording in [P]/[A]/[S]/[M] modes. From the [CreativeVideo Combined Set.] menu, you can separate settings for video recording and for picture recording. ¨[ ]¨[ ] ¨ Select [CreativeVideo Combined Set.] [F/SS/ISO/Exposure Comp.
PAGE 254
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 254 ページ２０１９年１月１１日 11. Recording Videos [High Speed Video] Records slow videos of MP4 format by performing ultra-high-speed recording. 0 Use a card rated at UHS Speed Class 3 or higher when using an SD card for this function. ¨[ ]¨[ ] ¨ Select [High Speed Video] Item Frame rate (for recording) [Rec Quality] (for storage) Slow motion effect [180/30p FHD] 180 frames/second FHD/20M/30p Approx. 1/6k [150/25p FHD] 150 frames/second FHD/20M/25p Approx.
PAGE 255
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 255 ページ２０１９年１月１１日金曜日 11. Recording Videos Recording HLG Videos Record videos with the wide dynamic range of the HLG format. You can record in very bright light where overexposure can occur or in dark areas where underexposure can occur, maintaining the rich yet subtle colours you can see with your naked eye. You can view the video that you record by outputting via HDMI to devices (TVs, etc.
PAGE 256
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 256 ページ２０１９年１月１１日 11. Recording Videos Recording Videos Using a Connected External Device External Monitor/Recorder ([HDMI Rec Output]) You can record while outputting the camera images to an external monitor or external recorder connected with an HDMI cable. HDMI output control differs between during recording and during playback. 0 Refer to page 364 for settings during playback. Getting started: 0 Turn off the camera and the external monitor/external recorder.
PAGE 257
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 257 ページ２０１９年１月１１日金曜日 11. Recording Videos 0 Use a “High Speed HDMI cable” with the HDMI logo. Cables that do not comply with the HDMI standards will not work. “High Speed HDMI cable” (Type A–Type A plug, up to 1.5 m (4.9 feet) long) Attaching the Cable Holder Use of the supplied cable holder prevents detachment of the cable and damage to the terminals. 0 Put the camera on a stable surface to perform this task.
PAGE 258
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 258 ページ２０１９年１月１１日 11. Recording Videos 4 Fit the USB connection cable (C–C or A–C) (F) and HDMI cable (G) to the clamp. 5 Slide the clamp portion (H) to attach it to the cable holder. 6 Connect the USB connection cable (C–C or A–C) to the USB port (I). 7 Connect the HDMI cable to the [HDMI] socket (J). K Leave some slack so that this section has a length of at least 10 cm (0.33 feet).
PAGE 259
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 259 ページ２０１９年１月１１日金曜日 11. Recording Videos Images Output via the [HDMI] Socket (Sorted by Recording Mode) Recording Mode iA/P/A/S/M Aspect ratio Output is in accordance with the [Rec Quality] setting in the [Video] ([Image Format]) menu. The output setting is determined by the connected device. Resolution, frame rate Output bit value Output is in accordance with the [Aspect Ratio] setting in the [Photo] ([Image Quality]) menu.
PAGE 260
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 260 ページ２０１９年１月１１日 11. Recording Videos Setting the Information Display During HDMI Output Select whether or not to output the information display of the camera to an external device connected via HDMI. ¨[ ]¨[ ] ¨ [HDMI Rec Output] ¨ Select [Info Display] Settings: [ON]/[OFF] 0 When you use the HDMI output during recording, the image may be displayed with a time lag. 0 Beep sounds, AF beep, and electronic shutter sounds are muted during HDMI output.
PAGE 261
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 261 ページ２０１９年１月１１日金曜日 11. Recording Videos External Microphones (Optional) With a Stereo Shotgun Microphone (DMW-MS2: optional) or Stereo Microphone (VW-VMS10: optional), you can record higher-quality audio compared to the built-in microphone. 1 Set the [Mic Socket] that suits the device to be connected. ≥ ¨[ ]¨[ ] ¨ [Mic Socket] [Mic Input (Plugin Power)] When connecting an external microphone that requires a power supply from the camera [MIC] terminal.
PAGE 262
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 262 ページ２０１９年１月１１日 11. Recording Videos 3 Connect the camera and external microphone. 0 If mounting the external microphone on the camera hot shoe A, remove the hot shoe cover. (l 223) 0 Do not use the stereo microphone cables with the length of 3 m (9.8 feet) or more. Setting the Sound Pickup Range (DMW-MS2: Optional) When using the Stereo Shotgun Microphone (DMW-MS2: optional), you can set the microphone sound pickup range. 1 Select [Special Mic.].
PAGE 263
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 263 ページ２０１９年１月１１日金曜日 11. Recording Videos 0 You can register a function with the Fn button: [ ]¨[ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Mic. Directivity Adjust] (l 286) Reduction of Wind Noise This reduces wind noise when an external microphone is connected. ¨[ ]¨[ ] ¨ Select [Wind Cut] Settings: [HIGH]/[STANDARD]/[LOW]/[OFF] 0 While the external microphone is connected, [ ] is displayed on the screen.
PAGE 264
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 264 ページ２０１９年１月１１日 11. Recording Videos XLR Microphone Adaptor (Optional) By attaching an XLR Microphone Adaptor (DMW-XLR1: optional) to the camera, you can use a commercially available XLR microphone to enable the recording of superior-quality stereo audio. A Hot shoe B Commercially available XLR microphone Getting started: 0 Turn off the camera, and remove the hot shoe cover. (l 223) Attach the XLR Microphone Adaptor to the hot shoe, and then turn on the camera.
PAGE 265
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 265 ページ２０１９年１月１１日金曜日 11. Recording Videos 0 When [XLR Mic Adaptor Setting] is set to [ON], the following settings are fixed: – [Sound Rec Level Limiter]: [OFF] – [Wind Noise Canceller]: [OFF] – [Special Mic.]: [STEREO] – [Sound Output]: [REC SOUND] 0 [Sound Rec Level Adj.] cannot be used when [XLR Mic Adaptor Setting] is set to [ON]. 0 When the XLR Microphone Adaptor is attached, [Sound Rec Level Disp.
PAGE 266
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 266 ページ２０１９年１月１１日 11. Recording Videos Switching the Sound Output Method ¨[ ]¨[ [REALTIME] [REC SOUND] ] ¨ Select [Sound Output] Audio without time lag. It may differ from the sound recorded in videos. Audio to be recorded in videos. Output sound may be delayed from actual sound. 0 When recording with an HDMI connection, this is fixed to [REC SOUND]. Adjusting the Headphone Volume Connect the headphones and rotate . : Reduces the volume.
PAGE 267
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 267 ページ２０１９年１月１１日金曜日 12. Playing Back and Editing of Images This chapter explains the playing back and editing of images. 0 Refer to “[Playback] Menu” starting on page 368 for details about protection, ratings, and other playback and editing functions. Playing Back Pictures 1 Display the playback screen. 2 Select a picture. ≥Press [(]. A Card slot 1/999 ≥Select the pictures by pressing 21.
PAGE 268
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 268 ページ２０１９年１月１１日 12. Playing Back and Editing of Images 3 Stop playback. ≥Press the shutter button halfway. ≥You can also stop playback by pressing [(]. Switching the Card to Display Images are displayed separately by card slot. To switch the card to display, after pressing [ ], press 34 to select [Card Slot 1(XQD)] or [Card Slot 2(SD)], and then press or . 0 You can transfer pictures to a smartphone connected by Bluetooth by pressing [Q].
PAGE 269
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 269 ページ２０１９年１月１１日金曜日 12. Playing Back and Editing of Images Playing Back Videos 1 Display the playback screen. 2 Select a video. ≥Press [(]. 8m30s 0 For information about how to select images, refer to page 267. ] video icon is displayed for a video. 0 The [ A Video recording time 3 4 Play back the video. ≥Press 3. ≥You can also start playback by touching [ ] at the centre of the screen. ≥The elapsed playback time is displayed on the screen.
PAGE 270
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 270 ページ２０１９年１月１１日 12. Playing Back and Editing of Images Operations During Video Playback Button operation Touch operation Description of operation 3 Plays/pauses. 4 Stops. Performs fast-rewind playback. 0 If you press 2 again, the fast-rewind speed increases. 2 1 Performs frame-by-frame rewinding (while paused). 0 During the playback of AVCHD video, frameby-frame rewinding will be at an approx. 0.5 second interval. Performs fast-forward playback.
PAGE 271
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 271 ページ２０１９年１月１１日金曜日 12. Playing Back and Editing of Images Extracting a Picture Extract one frame of a video and save it as a JPEG image. 1 Pause playback at the position you wish to extract a picture. ≥Press 3. 0 To fine-adjust the position, press 21 (frame-by-frame forward or frame-byframe rewind). 2 Save the picture. ≥Press or . ≥You can also perform the same operation by touching [ ].
PAGE 272
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 272 ページ２０１９年１月１１日 12. Playing Back and Editing of Images Switching the Display Mode You can use features to do things like enlarge recorded images for display and switch to thumbnail display to display multiple images at once (multiplayback). You can also switch to Calendar display to show images of a selected recording date. Enlarged Display Playback images can be displayed enlarged (Playback Zoom). Enlarging the playback screen. 2.0X ≥Rotate to the right.
PAGE 273
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 273 ページ２０１９年１月１１日金曜日 12. Playing Back and Editing of Images Operations During Enlarged Display Button operation Touch operation s Pinch out/ pinch in 3421 Drag s s Description of operation Enlarges/reduces the screen. Enlarges/reduces the screen in small steps. Moves the enlarged display position. Positions can be moved to the diagonal directions using the joystick.
PAGE 274
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 274 ページ２０１９年１月１１日 12. Playing Back and Editing of Images Thumbnail Screen 1 Switch to thumbnail display. 1/999 ≥Rotate to the left. ≥The display is switched in the order of 12-image screen 30-image screen. A Card 0 An orange frame is shown around the selected image. to the left during 30-image screen display switches to calendar display. (l 275) 0 Rotating to the right returns to the previous display. 0 You can also switch the display by touching an icon.
PAGE 275
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 275 ページ２０１９年１月１１日金曜日 12. Playing Back and Editing of Images Calendar Playback 1 2 3 Switch to Calendar Playback. ≥Rotate to the left. ≥The display is switched in the order of thumbnail screen (12 images) thumbnail screen (30 images) Calendar Playback. 0 Rotating SUN MON TUE WED THU FRI SAT 2019 12 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 to the right returns to the previous display.
PAGE 276
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 276 ページ２０１９年１月１１日 12. Playing Back and Editing of Images Group Images Images recorded with Time Lapse Shot or Stop Motion Shooting are handled as group images in the camera, and can be deleted and edited on a group basis. (For example, if you delete a group image, all images in the group are deleted.) You can also delete and edit each image in a group individually. Images Handled as Group Images by the Camera Group images saved with [6K/4K PHOTO Bulk Saving].
PAGE 277
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 277 ページ２０１９年１月１１日金曜日 12. Playing Back and Editing of Images Deleting Images 0 Images cannot be restored once they have been deleted. Carefully confirm the images before deletion. 0 You can only delete the images in the card of the selected card slot. 0 If you delete a group image, all images in the group are deleted. [Delete Single] 1 Press [ ] in playback state. 2 Press 34 to select [Delete Single] and then press or .
PAGE 278
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 278 ページ２０１９年１月１１日 12. Playing Back and Editing of Images 0 To switch the card selected for deleting images, press [ ] and then select the card slot. 0 Depending on the number of images to be deleted, it may take some time to delete them.
PAGE 279
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 279 ページ２０１９年１月１１日金曜日 12. Playing Back and Editing of Images [RAW Processing] This processes pictures taken in RAW format on the camera and saves them in JPEG format. You can also save images recorded with [HLG Photo] in the RAW format as HLG format. 1 Select [RAW Processing]. 2 Select the RAW image. ≥ ¨[ ]¨[ Processing] ] ¨ [RAW ≥Press 21 to select an image and then press or . 0 When group images are selected, press 3 and then select an image in the group.
PAGE 280
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 280 ページ２０１９年１月１１日 12. Playing Back and Editing of Images 4 Change the setting. ≥Rotate , , or . 0 The image can be enlarged/reduced by pinching out/pinching in the screen. DISP. -2 5 Confirm the setting. ≥Press or . ≥The screen of Step reappears. To set another item, repeat Steps to . 3 5 6 280 3 Save the image. ≥Press 34 to select [Begin Processing] and then press .
PAGE 281
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 281 ページ２０１９年１月１１日金曜日 12. Playing Back and Editing of Images Setting Items ([RAW Processing]) [Begin Processing] [White Balance] [Brightness correction] Saves the image. Selects and adjusts the white balance. Selecting the item with [ ] enables processing with the same setting as at the time of recording. 0 If you press 4 in the [White Balance] selection screen, the white balance adjustment screen appears.
PAGE 282
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 282 ページ２０１９年１月１１日 12. Playing Back and Editing of Images [More Settings] [Revert To Original]: Returns the settings to the ones from the time of recording. [File Format]: Selects a file format from [JPEG] or [HLG]. (Only images recorded with [HLG Photo]) [Color Space]: Selects a Colour Space setting from [sRGB] and [Adobe RGB]. (Only when [JPEG] is selected in [File Format]) [Picture Size]: Selects the size for storing images.
PAGE 283
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 283 ページ２０１９年１月１１日金曜日 12. Playing Back and Editing of Images Displaying a Comparison Screen You can change a setting while checking the effect by displaying images with the applied setting value side by side. 1 Press [DISP.] in the screen of Step 4. 0 The image with the current setting A is displayed at the centre. 0 Touching the image with the current setting enlarges it. Touching [ ] returns to the original display.
PAGE 284
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 284 ページ２０１９年１月１１日 12. Playing Back and Editing of Images [Video Divide] Divide a recorded video or 6K/4K burst file into two. 0 Images cannot be returned to their original state once they have been divided. Carefully confirm the images before performing the divide operation. 0 Do not remove the card or battery from the camera during the divide process. The images may be lost. 1 Select [Video Divide]. 2 Select and play the images.
PAGE 285
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 285 ページ２０１９年１月１１日金曜日 13. Camera Customisation This chapter explains the customisation function with which you can configure the camera to your preferred settings. Change how buttons, dials, etc. on the camera are to be operated. Fn buttons Fn lever Dials l 286 l 294 l 297 Register the currently set information of the camera. Custom mode l 303 Change menu display items.
PAGE 286
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 286 ページ２０１９年１月１１日 13. Camera Customisation Fn Buttons You can register functions to the Fn (Function) buttons. Additionally, you can register other functions to specialised buttons such as [WB], in the same way as with the Fn buttons. Different functions can be set for both during recording and playback. Fn2 WB ISO Fn1 V.
PAGE 287
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 287 ページ２０１９年１月１１日金曜日 13. Camera Customisation Register Functions to the Fn Buttons 0 With default settings, [Fn8] to [Fn12] on the joystick cannot be used. When using functions, set the [Joystick Setting] to [Fn]. (l 344) 1 Select [Fn Button Set]. 2 Select the button. ≥ ¨[ ]¨[ ] ¨ [Fn Button Set] ¨ [Setting in REC mode]/ [Setting in PLAY mode] ≥Press 34 to select the button and then press or . ≥Selection is also possible by rotating or . 0 Press [DISP.
PAGE 288
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 288 ページ２０１９年１月１１日 13. Camera Customisation 4 Register the function. ≥Press 34 to select a function and then press or . ≥Selection is also possible by rotating or . 0 Select items with [N] by selecting the item again. 0 Depending on the button, some functions cannot be registered. 0 You can also touch [ Fn ] on the control panel (l 75) to display the screen in Step 2. 0 You can also press and hold the Fn button (2 sec.) to display the screen in 4 Step .
PAGE 289
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 289 ページ２０１９年１月１１日金曜日 13. Camera Customisation Setting Items ([Fn Button Set]/[Setting in REC mode]) [1] Tab [Image Quality] – [Exposure Comp.
PAGE 290
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 290 ページ２０１９年１月１１日 13. Camera Customisation [2] Tab [Image Format] – [Motion Pic. Rec Format] (l 240) – [Motion Pic. Rec Quality] (l 241) [Audio] – [Sound Rec Level Disp.] (l 250) – [Sound Rec Level Adj.] (l 250) – [Mic. Directivity Adjust] (l 262) [Others (Video)] – [Image Stabilizer] (l 181) – [E-Stabilization (Video)] (l 181) – [Boost I.S. (Video)] (l 181) [Fn5]¢ [Operation] – [Q.
PAGE 291
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 291 ページ２０１９年１月１１日金曜日 13. Camera Customisation 0 For details about some of the functions, refer to the section below. [1 Shot Spot Metering] Records with the metering mode set to [ metering) once only. ] (Spot [1 Shot RAW+JPG] Records a RAW image and a JPEG image simultaneously once only. [One Push AE] Adjusts the aperture value and shutter speed to the settings suited for the correct exposure determined by the camera.
PAGE 292
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 292 ページ２０１９年１月１１日 13. Camera Customisation Setting Items ([Fn Button Set]/[Setting in PLAY mode]) [1] Tab [Playback Mode] – [Magnify from AF Point] (l 370) – [HLG View Assist (Monitor)] (l 354) [Process Image] – [RAW Processing] (l 279) – [6K/4K PHOTO Bulk Saving] (l 151) – – – – – – – [Add/Delete Info.
PAGE 293
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 293 ページ２０１９年１月１１日金曜日 13. Camera Customisation 0 For details about some of the functions, refer to the section below. [Rec / Playback Switch] [6K/4K Photo Play] Switches to the recording screen. Displays the screen to select pictures to save from a 6K/4K burst file.
PAGE 294
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 294 ページ２０１９年１月１１日 13. Camera Customisation Fn Lever You can register a function with the Fn (function) lever. The registered function can be enabled instantly by toggling the Fn lever. In default settings, [Silent Mode] is registered. Register a Function to the Fn Lever Register the function and setting value that operate for when the Fn lever is switched to [MODE2]. 1 Set [Function of Fn Lever]. 2 Register the function.
PAGE 295
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 295 ページ２０１９年１月１１日金曜日 13. Camera Customisation 4 – – – – – – – – – – – ¢ Select a setting value. ≥Press 34 to select a setting value and then press or .
PAGE 296
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 296 ページ２０１９年１月１１日 13. Camera Customisation Use the Fn Lever Turning the lever to the [MODE2] position enables the function registered with the Fn lever. Switching the Fn lever. MODE2 The registered function is enabled. 0 Depending on the recording mode and camera settings, some registered functions may not work.
PAGE 297
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 297 ページ２０１９年１月１１日金曜日 13. Camera Customisation [Dial Operation Switch] This temporarily changes the functions operated with (rear dial). (front dial) and Register Functions to the Dials Register functions to each of 1 – – – – – ¨[ ]¨[ ] ¨ [Dial Set.] ¨ [Dial Operation Switch Setup] ¨ [ ]/[ ] Register the function. ≥Press 34 to select a function and then press or .
PAGE 298
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 298 ページ２０１９年１月１１日 13. Camera Customisation Temporarily Change Dial Operation Use the Fn button to temporarily change dial operation. 1 2 Set [Dial Operation Switch] to the Fn button. (l 286) Switch dial operation. 1 ≥Press the Fn button set in Step . ≥A guide will display the functions registered to and . WB 0 If no operations are performed, then ISO several seconds later, the guide disappears. 3 Change the setting of the registered function.
PAGE 299
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 299 ページ２０１９年１月１１日金曜日 13. Camera Customisation Quick Menu Customisation You can change Quick menu items depending on the recording mode. Additionally, you can change the items to display on the Quick menu and their order to suit your preferences. For information about Quick menu operation methods, refer to page 78. Register to the Quick Menu Change the menus to be displayed in the Quick menu.
PAGE 300
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 300 ページ２０１９年１月１１日 13. Camera Customisation 3 Find the function to register. 4 Register menu items. ≥Rotate to select the sub tab where the function to register is categorised (l 301) and then press or . ≥You can also select by pressing 2 to select the sub tab, pressing 34 or rotating , and then pressing 1. ≥Each press of the [Q] switches between tabs [1] and [2]. ≥Press 34 to select an item and then press or . ≥Selection is also possible by rotating or .
PAGE 301
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 301 ページ２０１９年１月１１日金曜日 13. Camera Customisation Menu Items That Can Be Registered [1] Tab – – – – – – – – – – – – – – [Image Quality] [Exposure Comp.] (l 196) [Sensitivity] (l 199) [White Balance] (l 201) [Photo Style] (l 206) [Metering Mode] (l 185) [Aspect Ratio] (l 89) [Picture Quality] (l 92) [Picture Size] (l 90) [HLG Photo] (l 221) [Long Exposure NR] (l 313) [Min. Shutter Speed] (l 314) [i.
PAGE 302
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 302 ページ２０１９年１月１１日 13. Camera Customisation [2] Tab – – – – – – – – – – – – – – [Monitor / Display] [Constant Preview] (l 346) [Level Gauge] (l 346) [Histogram] (l 347) [Photo Grid Line] (l 348) [Live View Boost] (l 349) [Monochrome Live View] (l 349) [Night Mode] (l 350) [LVF/Monitor Disp. Set] (l 350) [Photo/Video Preview] (l 351) [Zebra Pattern] (l 353) [HLG View Assist (Monitor)] (l 354) [HLG View Assist (HDMI)] (l 354) [Sheer Overlay] (l 354) [I.S.
PAGE 303
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 303 ページ２０１９年１月１１日金曜日 13. Camera Customisation Custom Mode Recording modes and menu settings that match your preferences can be registered in Custom mode. You can use registered settings by switching the mode dial to [C1] to [C3] modes. Register in Custom Mode You can register the currently set information of the camera. At the time of purchase, the default settings of the [P] mode menus are registered with all Custom modes.
PAGE 304
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 304 ページ２０１９年１月１１日 13. Camera Customisation Custom Mode Detailed Settings Set the ease of use of Custom mode. You can create additional Custom mode sets, and how long to retain temporarily changed settings details. ¨[ ]¨[ ] ¨ Select [Custom Mode Settings] [Limit No. of Custom Mode] Sets the number of Custom modes that can be registered in [C3]. A maximum of 10 sets can be registered; 3 sets are available as default settings.
PAGE 305
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 305 ページ２０１９年１月１１日金曜日 13. Camera Customisation Using Custom Mode Set the mode dial to one of [C1] to [C3]. ≥ If [C3], the last-used Custom mode will be called up. [C3] Custom Mode Selection 1 Set the mode dial to [C3]. 2 Press . 0 The Custom mode selection menu appears. 3 Press 34 to select the Custom mode and then press or . 0 The selected Custom mode icon will be displayed on the recording screen.
PAGE 306
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 306 ページ２０１９年１月１１日 13. Camera Customisation Calling Settings Call registered Custom mode settings to the selected recording mode and overwrite the current settings with these. 1 2 3 Set to the mode dial to use. Select [Load Custom Mode]. ≥ ¨[ ]¨[ Custom Mode] ] ¨ [Load Select the Custom mode to call. ≥Select the Custom mode and then press or .
PAGE 307
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 307 ページ２０１９年１月１１日金曜日 13. Camera Customisation My Menu Register frequently-used menus in My Menu. A maximum of 23 items can be registered. Registered menus can be called up from [ ] to [ ]. Registration in My Menu Select a menu, and register this in My Menu. 1 Select [Add]. 2 Register. ≥ ¨[ ]¨[ ] ¨ [Add] ≥Select the menu to register and then press or . Calling up My Menu Call up the menus registered in My Menu.
PAGE 308
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 308 ページ２０１９年１月１１日 13. Camera Customisation Edit My Menu You can reorder the display order of My Menu, and delete unnecessary menus. ¨[ ] ¨ Select [ [Add] [Sorting] Changes the order of My Menu. Select the menu to change, then set the destination. [Delete] Deletes menus that are registered to My Menu. [Delete Item]: Selects the menu, then deletes. [Delete All]: Deletes all menus registered in My Menu.
PAGE 309
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 309 ページ２０１９年１月１１日金曜日 13. Camera Customisation [Save/Restore Camera Setting] Saves the camera’s settings information to the card. Saved settings information can be loaded to the camera, letting you set the same settings on multiple cameras. ¨[ ]¨[ ] ¨ Select [Save/Restore Camera Setting] Settings: [Card Slot 1(XQD)]/[Card Slot 2(SD)] Saves the camera’s settings information to the card.
PAGE 310
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 310 ページ２０１９年１月１１日 14. Menu Guide This chapter provides a menu list and default settings. Menus explained in detail in other chapters are indicated with page numbers. 0 For information about menu operation methods, refer to page 80. 0 For information about methods of entering characters, refer to page 376.
PAGE 311
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 311 ページ２０１９年１月１１日金曜日 14. Menu Guide [Photo] Menu l 312 [Flash Synchro] [Photo Style] l 206 [Manual Flash Adjust.] [Metering Mode] l 185 [Auto Exposure Comp.
PAGE 312
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 312 ページ２０１９年１月１１日 14. Menu Guide `: Default settings ¨ [Image Quality] [Photo Style] `[Standard]/[Vivid]/[Natural]/[Flat]/[Landscape]/ [Portrait]/[Monochrome]/[L.Monochrome]/ [L.Monochrome D]/[Cinelike D]/[Cinelike V]/ [Like709]/[Standard(HLG)]/[Monochrome(HLG)]/ [MY PHOTO STYLE 1] to [MY PHOTO STYLE 10] ¨ l 206 You can select the finishing settings of images to suit your subjects and expression styles.
PAGE 313
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 313 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Image Quality] ¨ `[ON]/[OFF] The camera automatically removes noise generated when recording images with a slow shutter speed. [Long Exposure NR] 0 The next picture cannot be taken during noise — removal. 0 When the following functions are being used, [Long Exposure NR] is not available: – Video recording/[6K/4K PHOTO]/[Post-Focus] – [ELEC.] (Excluding [ELEC.
PAGE 314
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 314 ページ２０１９年１月１１日 14. Menu Guide ¨ [Image Quality] ¨ `[AUTO]/[1/8000] to [1/1] [Min. Shutter Speed] Sets the minimum shutter speed when the ISO sensitivity is set to [AUTO]. — 0 The shutter speed may become slower than the set value in recording situations where correct exposure cannot be achieved. 0 This menu item can be registered to the Fn button.
PAGE 315
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 315 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Image Quality] ¨ `[ON]/[OFF] When the screen periphery darkens as a result of the lens characteristics, you can record pictures with the brightness of the screen periphery corrected. 0 Compensation effect may not be achieved [Vignetting Comp.] depending on the recording conditions. — 0 Noise in the periphery of the picture may stand out with higher ISO sensitivity.
PAGE 316
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 316 ページ２０１９年１月１１日 14. Menu Guide ¨ [Focus] ¨ `[Set 1]/[Set 2]/[Set 3]/[Set 4] [AF Custom Setting(Photo)] Select features of AF operation when recording using [AFC] that are appropriate for the subject and scene. l 103 `[ON]/[OFF] When recording in low light conditions, pressing the shutter button halfway lights the AF assist lamp, making it easier for the camera to focus.
PAGE 317
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 317 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Focus] ¨ `[ON]/[OFF] [SET] [Focus Peaking Sensitivity] [Display Color] [Display While AFS] During MF operation, in-focus portions (portions on the screen with clear outlines) are highlighted with colour. 0 If the [Focus Peaking Sensitivity] is adjusted to [Focus Peaking] the negative direction, portions to be highlighted are reduced, allowing you to achieve a more precise focus.
PAGE 318
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 318 ページ２０１９年１月１１日 14. Menu Guide ¨ [Focus] ¨ `[FAST]/[NORMAL] [1-Area AF Moving Speed] Sets the speed when moving a single AF area. This operates when AF mode is set to [ ], [ or [ ]. 0 This menu item can be registered to the Fn button. (l 286) ¨ [Flash] [Flash Mode] `[‰]/[ ]/[ ]/[ — ] ]/[Œ] Set the flash mode. ¨ l 227 `[TTL]/[MANUAL] [Firing Mode] You can select whether to set the flash output automatically or manually.
PAGE 319
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 319 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Flash] ¨ [ON]/`[OFF] [Red-Eye Removal] [Wireless] When [Flash Mode] is set to [ ] or [ ], the camera automatically detects red-eye and corrects image data. [ON]/`[OFF] Enables recording using a wireless flash. l 232 l 234 `[1CH]/[2CH]/[3CH]/[4CH] [Wireless Channel] Sets the channel to use when recording with a wireless flash.
PAGE 320
DC-S1E-DVQX1742_eng.book 320 ページ２０１９年３月１５日金曜日 14. Menu Guide ¨ [Others (Photo)] [Bracketing Type] [Bracketing] [ [ ]/[ ]/[ ]/`[OFF] ]/[ ¨ ]/ l 162 [More Settings] You can take multiple pictures while automatically adjusting a setting. [ON]/`[OFF] [Silent Mode] [Image Stabilizer] Disables all operation sounds and light output at once. [Operation Mode] `[ [ ]/[ ]/[ ]/[OFF] [Body(B.I.S.) / Lens(O.I.S.
PAGE 321
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 321 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Others (Photo)] ¨ [8SEC]/[4SEC]/[2SEC]/[1SEC]/`[OFF] [Shutter Delay] To reduce camera shake and shutter-induced blur, the shutter is released after the specified time has passed since the shutter button was pressed. — 0 When the following functions are being used, [Shutter Delay] is not available: – Video recording/[6K/4K PHOTO]/[Post-Focus] – [High Resolution Mode] [ZOOM]/[TELE CONV.]/`[OFF] [Ex. Tele Conv.
PAGE 322
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 322 ページ２０１９年１月１１日 14. Menu Guide ¨ [Others (Photo)] ¨ [ON]/`[OFF] Detects flickering such as that under fluorescent lighting, and records using a timing that minimises this. 0 The reduction effect may not be obtained depending on the recording conditions. [Flicker Decrease (Photo)] [6K/4K PHOTO] 0 When Flicker Decrease is operating, the [FLICKER] icon will be displayed in yellow on the recording screen.
PAGE 323
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 323 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Others (Photo)] ¨ [6K 18M]/[4K 8M]/`[OFF] [Post-Focus] Taking burst pictures with the same image quality as 6K/4K photos while automatically changing the focus position. You can select the focus position for the picture to save after recording. l 168 [Start] [Auto Gain] `[ON]/[OFF] [Overlay] [ON]/`[OFF] You can apply an effect equivalent to four exposures on a single image.
PAGE 324
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 324 ページ２０１９年１月１１日 14. Menu Guide ¨ [Others (Photo)] ¨ 0 Recording the picture will automatically stop multiple exposure recording. 0 To finish multiple exposure recording before 0 0 [Multiple Exposure] (Continued) 0 0 0 324 starting the recording, press [Q] on the recording screen. Recording information for the last-recorded image will be saved as recording information for images recorded with multiple exposures.
PAGE 325
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 325 ページ２０１９年１月１１日金曜日 14. Menu Guide [Video] Menu [Image Quality] l 326 [Audio] l 329 [Exposure Mode] l 251 [Sound Rec Level Disp.] l 250 [Photo Style] l 206 [Sound Rec Level Adj.] l 250 [Metering Mode] l 185 [ISO Sensitivity (video)] l 326 [Sound Rec Level Limiter] l 250 [Flicker Decrease (Video)] l 327 [Wind Noise Canceller] l 330 [Wind Cut] l 263 [i.Dynamic Range] l 314 [Mic Socket] l 261 [Vignetting Comp.] l 315 [Special Mic.
PAGE 326
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 326 ページ２０１９年１月１１日 14. Menu Guide `: Default settings ¨ [Image Quality] [Exposure Mode] [Photo Style] `[P]/[A]/[S]/[M] Sets the exposure mode to use in [ ] mode. `[Standard]/[Vivid]/[Natural]/[Flat]/[Landscape]/ [Portrait]/[Monochrome]/[L.Monochrome]/ [L.
PAGE 327
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 327 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Image Quality] ¨ [1/50]/[1/60]/[1/100]/[1/120]/`[OFF] [Flicker Decrease (Video)] The shutter speed can be fixed to reduce the flicker or striping in the video. 0 When [Auto Exposure in P/A/S/M] is [OFF], [Flicker Decrease (Video)] is not available. — [AUTO]/[HIGH]/[STANDARD]/[LOW]/`[OFF] [i.
PAGE 328
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 328 ページ２０１９年１月１１日 14. Menu Guide ¨ [Image Quality] ¨ `[ON]/[OFF] [Auto Exposure in P/A/S/M] Selects the setting method for aperture value, shutter speed, and ISO sensitivity for the video being recorded. (l 238) — [ON]: Records with values set automatically by the camera. [OFF]: Records with manually set values. [CreativeVideo Combined Set.] [F/SS/ISO/Exposure Comp.
PAGE 329
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 329 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Focus] ¨ [ON]/`[OFF] [AF Custom Setting(Video)] [SET] [AF Speed]/[AF Sensitivity] You can fine-adjust the focusing method for video recording using [Continuous AF]. l 247 `[ON]/[OFF] [Continuous AF] You can select how to set the focus in AF when recording videos.
PAGE 330
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 330 ページ２０１９年１月１１日 14. Menu Guide ¨ [Audio] ¨ [HIGH]/`[STANDARD]/[OFF] This reduces the wind noise coming into the builtin microphone while maintaining sound quality. 0 [HIGH] effectively reduces the wind noise by [Wind Noise Canceller] reducing the low-pitched sound when a strong wind is detected. 0 [STANDARD] extracts and reduces only the wind noise without deteriorating the sound quality.
PAGE 331
DC-S1E-DVQX1742_eng.book 331 ページ２０１９年３月１５日金曜日午前１１時４８分 14. Menu Guide ¨ [Monitor / Display] [Info Display] [HDMI Rec Output] Select whether or not to output the information display of the camera to an external device connected via HDMI. ¨ [Others (Video)] [Image Stabilizer] ¨ `[ON]/[OFF] [Operation Mode] `[ [ ]/[ ]/[ ]/[OFF] [Body(B.I.S.) / Lens(O.I.S.)] [ ]/`[ [When to Activate] [ALWAYS]/`[HALFSHUTTER] [E-Stabilization (Video)] [ON]/`[OFF] [Boost I.S.
PAGE 332
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 332 ページ２０１９年１月１１日 14. Menu Guide [Custom] Menu [Image Quality] l 334 [Photo Style Settings] l 334 [Q.MENU Settings] l 299 [ISO Increments] l 334 [Touch Settings] l 340 [Extended ISO] l 334 [Lock Lever Setting] l 341 [Exposure Offset Adjust.] l 335 [Fn Button Set] l 286 [Color Space] l 335 [Fn Lever Setting] l 294 [Exposure Comp. Reset] l 335 [WB/ISO/Expo.
PAGE 333
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 333 ページ２０１９年１月１１日金曜日 14. Menu Guide [Monitor / Display] l 345 [Auto Review] l 345 [Constant Preview] l 346 [Level Gauge] l 346 [Histogram] l 347 [Photo Grid Line] l 348 [Framing Outline] l 348 [Center Marker] l 348 [AF Area Display] l 348 [Live View Boost] l 349 [Monochrome Live View] l 349 [Night Mode] l 350 [LVF/Monitor Disp. Set] l 350 [Expo.
PAGE 334
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 334 ページ２０１９年１月１１日 14. Menu Guide `: Default settings ¨ [Image Quality] [Show/Hide Photo Style] ¨ [Vivid]/[Natural]/[Flat]/[Landscape]/ [Portrait]/[L.Monochrome]/ [L.Monochrome D]/[Cinelike D]/ [Cinelike V]/[Like709]/[MY PHOTO STYLE 1] to [MY PHOTO STYLE 10] Sets Photo Style items to be displayed on the menu.
PAGE 335
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 335 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Image Quality] [Exposure Offset Adjust.] [Multi Metering] [j1EV] to [i1EV] (`[±0EV]) [Center Weighted] [j1EV] to [i1EV] (`[±0EV]) [Spot] [j1EV] to [i1EV] (`[±0EV]) [Highlight Weighted] [j1EV] to [i1EV] (`[±0EV]) ¨ Adjusts the exposure level that is the standard correct exposure for each item of [Metering Mode].
PAGE 336
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 336 ページ２０１９年１月１１日 14. Menu Guide [Focus/Shutter] [Focus/Shutter Priority] ¨ ¨ [AFS] `[FOCUS]/[BALANCE]/[RELEASE] [AFC] [FOCUS]/`[BALANCE]/[RELEASE] This sets whether to give priority to focus or shutter release during AF. [FOCUS]: Disables recording when focus is not achieved. [BALANCE]: Performs recording while controlling the balance between focusing and shutter release timing. [RELEASE]: Enables recording even when focus is not achieved.
PAGE 337
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 337 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Focus/Shutter] [Focus Ring] `[ON]/[OFF] [AF Mode/MF] [ON]/`[OFF] [Press Joystick] [ON]/`[OFF] [MF Assist Display] [FULL]/`[PIP] ¨ This sets the display method of MF Assist (enlarged screen). [MF Assist] [Focus Ring]: The screen is enlarged by focusing with the lens. [AF Mode/MF]: The screen is enlarged by pressing [ ]. [Press Joystick]: Press the joystick to enlarge the display.
PAGE 338
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 338 ページ２０１９年１月１１日 14. Menu Guide ¨ [Focus/Shutter] [Show/Hide AF Mode] [Face/Eye/Body/ Animal Detect.] `[ON]/[OFF] [Tracking] `[ON]/[OFF] [225-Area] `[ON]/[OFF] [Zone (Vert./ Horz.)] `[ON]/[OFF] [Zone (Square)] [ON]/`[OFF] [Zone (Oval)] `[ON]/[OFF] [1-Area+] `[ON]/[OFF] [Pinpoint] `[ON]/[OFF] [Custom1] [ON]/`[OFF] [Custom2] [ON]/`[OFF] [Custom3] [ON]/`[OFF] ¨ Sets the AF mode items to be displayed on the AF mode selection screen.
PAGE 339
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 339 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Focus/Shutter] [AF-Point Scope Setting] [Keep Enlarged Display] [ON]/`[OFF] [PIP Display] [FULL]/`[PIP] ¨ Changes the enlarged screen settings of AF-Point Scope (l 101). [Keep Enlarged Display]: Setting this to [ON] maintains the enlarged screen after pressing the Fn button until it is pressed again. [PIP Display]: Sets the display method (windowed mode/full screen mode) of the enlarged screen.
PAGE 340
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 340 ページ２０１９年１月１１日 14. Menu Guide ¨ [Focus/Shutter] ¨ [ON]/`[OFF] [Looped Focus Frame] When moving the AF area or MF Assist, this enables its position to loop from one edge to the other edge of the screen. [ON]/`[OFF] [AFC Start Point (225-Area)] When using [ ] with the focus mode set to [AFC], you can specify at which area to start [AFC]. 0 For details, refer to page 111. ¨ [Operation] [Q.
PAGE 341
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 341 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Operation] [Lock Lever Setting] [Cursor] ` / [Joystick] ` / [Touch Screen] ` / [Dial] ` / [DISP. Button] ` / ¨ Sets the operations to be disabled with the operation lock lever. (Only for recording screen) [Cursor]: Cursor buttons, [MENU/SET] button, and [Joystick]: Joystick [Touch Screen]: Touch screen [Dial]: , , and [DISP. Button]: [DISP.
PAGE 342
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 342 ページ２０１９年１月１１日 14. Menu Guide ¨ [Operation] ¨ [WHILE PRESSING]/[AFTER PRESSING1]/`[AFTER PRESSING2] This sets the operation to be performed when [WB] (White Balance), [ISO] (ISO sensitivity) or [ ] (Exposure Compensation) is pressed. [WB/ISO/Expo. Button] [WHILE PRESSING]: Allows you to change the setting while pressing and holding the button. Release the button to confirm the settings value, and to return to the recording screen.
PAGE 343
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 343 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Operation] [Assign Dial (F/SS)] ¨ `[SET1]/[SET2]/[SET3]/[SET4]/ [SET5] Sets the operations to be assigned to the dials in [P]/[A]/[S]/ [M] modes. : Programme Shift, F: Aperture value, SS: Shutter speed P [SET1] s [SET2] s [SET3] s [SET4] [Dial Set.
PAGE 344
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 344 ページ２０１９年１月１１日 14. Menu Guide ¨ [Operation] [Exposure Comp.] [ ]/[ ¨ ]/`[OFF] Assigns exposure compensation to or . (Except in [M] mode) 0 The [Assign Dial (F/SS)] setting takes priority. [Dial Set.] (Continued) [Dial Operation Switch Setup] [ ] [ ] In the Fn button [Dial Operation Switch], this sets the items to be assigned temporarily to or .
PAGE 345
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 345 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Operation] ¨ `[ON]/[OFF] [Video Rec. Button (Remote)] Disables the video rec. button on the Shutter Remote Control (optional). 0 For details, refer to page 454.
PAGE 346
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 346 ページ２０１９年１月１１日 14. Menu Guide [Monitor / Display] ¨ ¨ [ON]/`[OFF] [SET] [Constant Preview] [Preview While MF Assist] You can always confirm the effects of aperture and shutter speed on the recording screen when in [M] mode. Preview also operates in the MF Assist screen when [Preview While MF Assist] is set to [ON]. 0 This function does not work when using the flash. 0 This menu item can be registered to the Fn button.
PAGE 347
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 347 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Monitor / Display] ¨ [ON]/`[OFF] This displays the histogram. Turning this [ON] displays the histogram transition screen. Press 3421 to set the position. Positions can be moved to the diagonal directions using the joystick. 0 You can also move the position by dragging the histogram on the recording screen.
PAGE 348
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 348 ページ２０１９年１月１１日 14. Menu Guide ¨ [Monitor / Display] [ [Photo Grid Line] ]/[ ]/[ ¨ ]/`[OFF] Sets the grid line pattern to be displayed on the recording screen. When using [ ], you can press 3421 to set the position. Positions can be moved to the diagonal directions using the joystick. 0 When using [ ], you can also drag [ ] on the grid lines on the recording screen to move the position. 0 This menu item can be registered to the Fn button.
PAGE 349
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 349 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Monitor / Display] ¨ [MODE1]/[MODE2]/`[OFF] [SET] [P/A/S/M]/`[M] Displays the screen brighter to make it easier to check subjects and compositions even in low-light environment. [MODE1]: Setting for low brightness, with priority given to a soft display. [MODE2]: Setting for high brightness, with priority given to image visibility.
PAGE 350
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 350 ページ２０１９年１月１１日 14. Menu Guide ¨ [Monitor / Display] [Monitor] [ON]/`[OFF] [LVF] [ON]/`[OFF] ¨ Displays monitor and viewfinder in red. In dark environments, this reduces brightness of the screen that can make the surroundings difficult to see. You can also set the luminance of the red display. 1 [Night Mode] Press 3421 to select [ON] on the monitor or viewfinder (LVF). Press [DISP.] to display the brightness adjustment screen.
PAGE 351
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 351 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Monitor / Display] ¨ [ON]/`[OFF] This displays the exposure metre. SS F [Expo.Meter] 125 30 60 4.0 30 5.6 15 8.0 8 11 F5.6 0 Set to [ON] to display the exposure metre when performing Programme Shift, setting aperture, and setting shutter speed. 0 If no operations are performed for approx. 4 seconds, the exposure metre disappears.
PAGE 352
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 352 ページ２０１９年１月１１日 14. Menu Guide ¨ [Monitor / Display] `[ ]/[ ¨ ] This will switch display between the number of recordable pictures and available recording time. [ [ ]: Displays the number of recordable pictures. ]: Displays the available recording time for video. 0 Even when this is set to [ [Photos/Videos Remaining] [Show/Hide Monitor Layout] ], the number of recordable pictures is displayed for a while after a picture is taken.
PAGE 353
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 353 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Monitor / Display] ¨ [ZEBRA1]/[ZEBRA2]/`[OFF] [SET] [Zebra 1]/[Zebra 2] This indicates areas where overexposure may occur in a zebra pattern. [ZEBRA1] [Zebra Pattern] [ZEBRA2] Select [SET] to set the brightness to be processed as a zebra pattern. 0 You can select a brightness value between [50%] and [105%]. In [Zebra 2], you can select [OFF].
PAGE 354
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 354 ページ２０１９年１月１１日 14. Menu Guide [Monitor / Display] ¨ ¨ [Monitor] [MODE1]/`[MODE2]/[OFF] [HDMI] `[AUTO]/[MODE1]/[MODE2]/[OFF] At recording or playback of [HLG Photo] and HLG video, this displays images with converted colour gamut and brightness on the camera monitor/viewfinder, or outputs these over HDMI. [HLG View Assist] [AUTO]: Converts images before outputting them via HDMI while applying the effect of [MODE2].
PAGE 355
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 355 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Monitor / Display] ¨ [ON]/`[OFF] Displays a reference point on the recording screen in order to let you check for camera shake. A Reference point [I.S. Status Scope] 0 When the following functions are being used, [I.S. Status Scope] is not available: – Video recording/[6K/4K PHOTO]/[Post-Focus] 0 This menu item can be registered to the Fn button.
PAGE 356
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 356 ページ２０１９年１月１１日 14.
PAGE 357
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 357 ページ２０１９年１月１１日金曜日 14. Menu Guide `: Default settings ¨ [Card/File] ¨ [Card Slot 1(XQD)]/[Card Slot 2(SD)] [Card Format] Formats the card (initialisation). 0 For details, refer to page 55. [Recording Method] [Double Card Slot Function] [Folder / File Settings] `[ ]/[ ]/[ ] This sets the way recording to the card slots 1 and 2 is performed. 0 For details, refer to page 94.
PAGE 358
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 358 ページ２０１９年１月１１日 14. Menu Guide ¨ [Monitor / Display] [Power Save Mode] ¨ [Sleep Mode] [10MIN.]/`[5MIN.]/[2MIN.]/[1MIN.]/ [OFF] [Sleep Mode(Wi-Fi)] `[ON]/[OFF] [Auto LVF/Monitor Off] `[5MIN.]/[2MIN.]/[1MIN.]/[OFF] [Power Save LVF Shooting] [Time to Sleep] [Method of Activation] This is a function to automatically turn the camera to sleep (power save) status or turn off the viewfinder/monitor if no operation is performed for a set time.
PAGE 359
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 359 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Monitor / Display] ¨ [Brightness]/[Contrast]/[Saturation]/[Red Tint]/[Blue Tint] This adjusts the brightness, colouring, and red or blue tints of the monitor/viewfinder. [Monitor Settings]/ [Viewfinder] 1 2 Press 34 to select the setting item, and press 21 to adjust. Press or to confirm the setting. 0 It will adjust the monitor when the monitor is in use, and the viewfinder when the viewfinder is in use.
PAGE 360
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 360 ページ２０１９年１月１１日 14. Menu Guide ¨ [Monitor / Display] [Backlight] ¨ `[H]/[L]/[OFF] Sets the lighting method of the status LCD backlight. [H]: Brightens the status LCD backlight. [L]: Darkens the status LCD backlight. [OFF]: Turns off the status LCD backlight.
PAGE 361
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 361 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [IN/OUT] [Beep] ¨ [Beep Volume] [ ] (High)/`[ (Off) ] (Low)/[ ] [AF Beep Volume] [ ] (High)/`[ (Off) ] (Low)/[ ] [AF Beep Tone] `[ [ [E-Shutter Vol] [ ] (High)/`[ (Off) [E-Shutter Tone] `[ [ ] (Pattern 1)/[ ] (Pattern 3) ] (Pattern 2)/ ] (Low)/[ ] (Pattern 1)/[ ] (Pattern 3) ] ] (Pattern 2)/ Sets the beep sounds, AF beep, and electronic shutter sounds.
PAGE 362
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 362 ページ２０１９年１月１１日 14. Menu Guide ¨ [IN/OUT] [USB Mode] ¨ `[y][Select on connection]/ [z][PC(Storage)]/ [ ][PC(Tether)]/ [{][PictBridge(PTP)] This sets the communication method to be used when the USB connection cable is connected. [USB] [y][Select on connection]: Select this setting to select the USB communication system when connecting to another device. [z][PC(Storage)]: Select this setting to export images to a connected PC.
PAGE 363
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 363 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [IN/OUT] ¨ Displays the remaining level and degree of deterioration of the battery. If the usage duration drops significantly even when the battery is fully charged, then the battery is at the end of its service life. Check its status, and replace with a new battery. [Battery Information] [Remaining Level]: Displays the battery remaining level as a percentage (1% units) and as a bar.
PAGE 364
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 364 ページ２０１９年１月１１日 14. Menu Guide ¨ [IN/OUT] [HDMI Mode (Playback)] ¨ `[AUTO]/[4K/50p]/[4K/25p]/[1080p]/ [1080i]/[720p]/[576p] Sets the output resolution during HDMI connection. [AUTO]: Outputs images at an output resolution suited to the connected TV. 0 If no image appears on the TV with [AUTO], switch to a [TV Connection] constant setting other than [AUTO] to set a format supported by your TV. (Refer to the operating instructions for the TV.
PAGE 365
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 365 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Setting] [Background Color(Playback)] [TV Connection] (Continued) [Save to Custom Mode] [ ]/`[ ¨ ] Sets the colour of the bands displayed on the top and bottom or the left and right of images output on a TV or similar display. 0 We recommend setting to [ ] to prevent burn-in on the screen of the output destination. [C1]/[C2]/[C3-1] to [C3-10] You can register the currently set information of the camera.
PAGE 366
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 366 ページ２０１９年１月１１日 14. Menu Guide ¨ [Others] [Clock Set] ¨ Sets the date and time. 0 For details, refer to page 60. Sets the time zone. Press 21 to select the time zone and then press to confirm. [Time Zone] or A Current time B Time difference from GMT (Greenwich Mean Time) 0 If you are using Daylight Savings [ ], press 3. (The time will move forward by 1 hour.) To return to the normal time, press 3 again.
PAGE 367
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 367 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Others] ¨ [Firmware Update]/[Software info] You can check the firmware versions of the camera and lens. In addition, you can update the firmware, and display information about the camera software. [Firmware Version] [Firmware Update]: Updates firmware. 1 Download the firmware from the site on page 23.
PAGE 368
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 368 ページ２０１９年１月１１日 14. Menu Guide [Playback] Menu [Playback Mode] l 370 [Add/Delete Info.] l 372 [Rotate Disp.
PAGE 369
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 369 ページ２０１９年１月１１日金曜日 14. Menu Guide How to Select an Image(s) in the [Playback] menu Follow the steps below when the image selection screen is displayed. 0 When [Single] and [Multi] are not available, select an image in the same way as when [Single] is selected. 0 Images are displayed separately by card slot To switch the card to display, press [ ] and select the card slot. 0 You can only select images on one card at a time.
PAGE 370
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 370 ページ２０１９年１月１１日 14. Menu Guide `: Default settings [Playback Mode] ¨ ¨ `[ON]/[OFF] [Rotate Disp.] Automatically displays pictures vertically if they were recorded when holding the camera vertically. 0 When you play back pictures on a PC, use an OS and software that support Exif. The picture may not be displayed as rotated. [FILE NAME]/`[DATE/TIME] This sets the order in which the camera displays images during playback.
PAGE 371
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 371 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Process Image] ¨ [RAW Processing] Processes pictures taken in RAW format on the camera and saves them in JPEG format. In addition, RAW images recorded using [HLG Photo] can be saved in HLG format. 0 For details, refer to page 279. [6K/4K PHOTO Bulk Saving] You can save any 5 second period of pictures from a 6K/4K burst file all at once. 0 For details, refer to page 151.
PAGE 372
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 372 ページ２０１９年１月１１日 14. Menu Guide ¨ [Add/Delete Info.] ¨ [Single]/[Multi]/[Cancel] You can set protection for images so that they will not be deleted by mistake. However, if you format the card, the protected images will also be deleted. [Protect] 0 For information about how to select images, refer to page 369. 0 [Cancel] only allows to cancel settings at once for the images in a single card.
PAGE 373
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 373 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Edit Image] ¨ [Single]/[Multi] Reduce the picture size of JPEG images and save them as different images to enable them to be easily used for web pages or sent as email attachments. 0 For information about how to select images, refer to page [Resize] 369. – When [Single] is selected, after choosing the image, press 34 to select the size, then press or .
PAGE 374
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 374 ページ２０１９年１月１１日 14. Menu Guide ¨ [Edit Image] [Copy Direction] `[ ]/[ ¨ ] [Select Copy]/[Copy All in Folder]/[Copy All in Card] You can copy the images in one of the cards to the other card. 0 Copied images will be saved in a new folder. [Copy] [Select Copy]: Copies selected images. 1 Select the folder containing the images to copy. 2 Select the images. (l 369) [Copy All in Folder]: Copies all images in a folder. 1 Select the folder to copy.
PAGE 375
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 375 ページ２０１９年１月１１日金曜日 14. Menu Guide ¨ [Edit Image] ¨ 0 You can set up to 100 images at once with [Select Copy]. 0 The [Protect] setting is not copied. 0 Copying may take a while. – AVCHD videos cannot be copied.
PAGE 376
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 376 ページ２０１９年１月１１日 14. Menu Guide Entering Characters Follow the steps below when the character entry screen is displayed. 1 Enter characters. ≥Press 3421 to select characters and then press or until the character to enter is displayed. (Repeat this) 0 To repeatedly enter the same character, rotate or to the right to move the entry position cursor.
PAGE 377
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 377 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth Wi-Fi/Bluetooth Functions Using the camera Wi-FiR/BluetoothR functionality, you can remotely operate the camera from a smartphone, and transfer images to a smartphone by the camera operation. You can use the “LUMIX Sync” smartphone app for remote recording and image transfers. (l 379) You can transfer images to another device, such as a smartphone or PC, by operating the camera.
PAGE 378
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 378 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth 0 Do not remove the card or battery or move to an area without any reception while sending images. 0 The camera cannot be used to connect to a public wireless LAN connection. 0 We strongly recommend that you set an encryption to maintain information security. 0 We recommend that you use a sufficiently charged battery when sending images.
PAGE 379
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 379 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth Connecting to a Smartphone Connect with a smartphone which has the “Panasonic LUMIX Sync” (below: “LUMIX Sync”) smartphone app installed. Use “LUMIX Sync” for remote recording and image transfers. Connecting to a smartphone 1 Install “LUMIX Sync” on your smartphone. (l 380) Connect to a network, and install “LUMIX Sync” . Connect to a smartphone.
PAGE 380
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 380 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth Installing “LUMIX Sync” “LUMIX Sync” is an application for smartphones provided by Panasonic. Supported OS 1 2 3 4 Android™: Android 5 or higher iOS: iOS 11 or higher Connect the smartphone to a network. (Android) Select “Google Play™ Store”. (iOS) Select “App Store”. Enter “Panasonic LUMIX Sync” or “LUMIX” into the search box. Select and install the “Panasonic LUMIX Sync ” . 0 Use the latest version.
PAGE 381
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 381 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth Connecting to a Smartphone (Bluetooth Connection) Follow a simple connection setup procedure (pairing) to connect to a smartphone that supports Bluetooth Low Energy. When pairing is set up, the camera also automatically connects to the smartphone via Wi-Fi. 0 For the first-time connection, pairing settings are required. For information about connecting for the second and subsequent times, refer to page 383.
PAGE 382
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 382 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth Operating the camera in accordance with the smartphone guide. 3 Set the camera to Bluetooth pairing standby status. ¨[ ]¨[ ] ¨ [Bluetooth] ¨ [Bluetooth] ¨ [SET] ¨ [Pairing] ≥The camera enters connection standby status, and the device name (A) is displayed. ≥ 4  On the smartphone, select the camera device name. 0 (iOS devices) When a message to XXXXXXXXXXXX confirm the change of destination is displayed, select [Join].
PAGE 383
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 383 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth 0 (iOS devices) If the Wi-Fi connection attempt fails during Bluetooth connection, follow the message displayed to allow connection to the camera. If you still cannot connect, select the SSID of the camera on the Wi-Fi setup screen of the smartphone to connect. If the SSID is not displayed, turn off and on the camera, then perform the Bluetooth connection settings again.
PAGE 384
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 384 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth 0 Even if you set up pairing with more than one smartphone, you can only connect to one smartphone at a time. 0 When pairing takes some time, cancelling the pairing settings on both the smartphone and camera and re-establishing the connection may result in the camera being detected correctly. Cancelling Pairing 1 Cancel the pairing setting of the camera.
PAGE 385
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 385 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth 1 Set the camera to Wi-Fi connection standby status. ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [New Connection] ¨ [Remote Shooting & View] ≥The SSID (A) of the camera is displayed on the screen. ≥  0 You can also perform the same operation by pressing the Fn button assigned with [Wi-Fi]. For information about the Fn button, refer to page 286. 2 3 In the setting menu of the smartphone, turn the Wi-Fi function ON.
PAGE 386
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 386 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth 0 When a device different than the one you want to connect to is displayed, the camera will automatically connect to that device if you select [Yes]. If there are other Wi-Fi connection devices nearby, we recommend using either manual password input or QR code to connect with password authentication.
PAGE 387
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 387 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth 0 (iOS devices) If the Wi-Fi connection fails, follow the message displayed to allow connection to the camera. If you still cannot connect, select the SSID of the camera on the Wi-Fi setup screen of the smartphone to connect. If the SSID is not displayed, turn off and on the camera, then perform the Wi-Fi connection settings again. Manually entering a password to connect 1 Display the screen in Step 2 on page 386.
PAGE 388
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 388 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth Connection Methods Other Than the Default Settings When connecting with [Via Network], or [WPS Connection] in [Direct], follow the steps below: 1 Display the connection method setting screen for the camera. 0 ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [New Connection] ¨ [Remote Shooting & View] 2 Press [DISP.]. Connecting via network 1 2 3 4 Select [Via Network] and then press or .
PAGE 389
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 389 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth Terminating the Wi-Fi Connection To end the Wi-Fi connection between the camera and smartphone, follow the steps below: 1 Set the camera to recording mode. ≥Press the shutter button halfway. 2 End Wi-Fi connection. ≥ ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [Yes] 0 You can also perform the same operation 3 by pressing the Fn button assigned with [Wi-Fi]. For information about the Fn button, refer to page 286.
PAGE 390
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 390 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth Operating the Camera with a Smartphone Required Wireless Connectivity Type Depending on the function used, the required type of wireless connection will differ. Wireless connectivity required Support for Bluetooth Low Energy Bluetooth Indicates that the function can be used with smartphones that support Bluetooth Low Energy.
PAGE 391
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 391 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth [Remote shooting] Wi-Fi You can use the smartphone to record from a remote location while viewing the live view images from the camera. Getting started: 0 Connect the camera to a smartphone. (l 381, 384) 0 On the smartphone, start up “LUMIX Sync”. 1 Select [ 2 Start recording. ] ([Remote shooting]) in the home screen. 0 (iOS devices) When a message to confirm the change of destination is displayed, select [Join].
PAGE 392
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 392 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth Operation Method During Remote Recording Set either the camera or the smartphone as the priority control device to be used during remote recording. ¨[ ]¨[ Remote Device] ] ¨ [Wi-Fi] ¨ [Wi-Fi Setup] ¨ Select [Priority of [Camera] Operation is possible on both the camera and the smartphone. 0 The camera’s dial settings, etc. cannot be changed with the smartphone. Operation is possible only on the smartphone.
PAGE 393
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 393 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth [Shutter Remote Control] Bluetooth You can use the smartphone as a remote control for the shutter. Getting started: 0 Connect the camera to a smartphone by Bluetooth. (l 381) 0 On the smartphone, start up “LUMIX Sync”. 1 2 Select [ screen. ] ([Shutter Remote Control]) in the home Start recording.
PAGE 394
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 394 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth Bulb Recording The shutter can be kept open from the start to end of recording, which is useful for recording of starry skies or night scenery. Getting started: 0 Set the camera to [M] mode. (l 192) 0 Set the camera shutter speed to [B] (Bulb). (l 194) 1 Touch [ ] to start recording (keep touching, without removing your finger). 2 Remove your finger from [ ] to end recording.
PAGE 395
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 395 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth Transferring Recorded Images Wi-Fi Transfer an image stored on the card to the smartphone connected via Wi-Fi. Getting started: 0 Connect the camera to a smartphone. (l 381, 384) 0 On the smartphone, start up “LUMIX Sync”. 1 Select [ ] ([Import images]) in the “LUMIX Sync” home screen. 0 (iOS devices) When a message to confirm the change of destination is 2 displayed, select [Join]. Select the image to transfer.
PAGE 396
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 396 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth 0 You will need Android 7.0 or higher to save RAW pictures on an Android device. Depending on the smartphone or the OS, these may not be displayed correctly. 0 When a video is played back, this has a small data size and is transmitted using “LUMIX Sync”, therefore its image quality will differ from that of the actual video recording.
PAGE 397
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 397 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth Transferring Recorded Images Automatically Bluetooth Wi-Fi You can automatically transfer recorded pictures to a smartphone as they are taken. Getting started: 0 Connect the camera to a smartphone by Bluetooth. (l 381) 1 Enable [Auto Transfer] on the camera.
PAGE 398
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 398 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth 4 Record with the camera. 0 This automatically sends the recorded pictures to the specified device as they are taken. ] is displayed in the recording screen of the camera while a file is being sent. 0[ To Stop the Automatic Transfer of Images ¨[ ]¨[ ] ¨ [Bluetooth] ¨ [Auto Transfer] ¨ Select [OFF] ≥A confirmation screen is displayed, asking you to terminate the Wi-Fi connection.
PAGE 399
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 399 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth Recording Location Information Bluetooth The smartphone sends its location information to the camera via Bluetooth, and the camera performs recording while writing the acquired location information. Getting started: 0 Enable the GPS function on the smartphone. 0 Connect the camera to a smartphone by Bluetooth. (l 381) 1 Enable [Location Logging] on the camera.
PAGE 400
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 400 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth Camera Power Operations Bluetooth Wi-Fi Even when the camera is turned off, the smartphone can be used to start the camera and record images, or check the recorded images. Getting started: 1 Connect to a smartphone using Bluetooth. (l 381) 2 Enable [Remote Wakeup] on the camera. 0 ¨[ ]¨[ ] ¨ [Bluetooth] ¨ [Remote Wakeup] ¨ [ON] 3 Set the camera on/off switch to [OFF]. 4 On the smartphone, start up “LUMIX Sync”.
PAGE 401
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 401 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth Automatically Setting the Clock Bluetooth Synchronise the clock and the time zone setting of the camera with those of a smartphone. Getting started: 0 Connect the camera to a smartphone by Bluetooth. (l 381) Enabling [Auto Clock Set] on the camera.
PAGE 402
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 402 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth Saving Settings Information Bluetooth Wi-Fi This saves the camera’s settings information to the smartphone. Saved settings information can be loaded to the camera, letting you set the same settings on multiple cameras. Getting started: 0 Connect the camera to a smartphone by Bluetooth. (l 381) 1 2 Select [ ] ([Camera settings copy]) in the “LUMIX Sync” home screen. Save or load setup information.
PAGE 403
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 403 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth Sending Images from the Camera Operate the camera to send recorded images to a device connected by Wi-Fi. Operation flow Select the sending method. 1 Use the camera menu to select the sending method from either [Send Images While Recording] or [Send Images Stored in the Camera]. Select the destination (type of the destination device). 2 – – – – – [Smartphone] (l 406) [PC] (l 409) [Cloud Sync.
PAGE 404
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 404 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth Detailed information about connection methods for each destination device is described on pages 406 to 418. Refer to the following pages for the steps common to all devices. – Wi-Fi connections: [Via Network] (l 419)/[Direct] (l 423) – Image send settings (l 426) – Selecting images (l 427) Images That Can be Sent Images that can be sent differ depending on the destination device.
PAGE 405
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 405 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth 0 Sending may not be possible depending on your device. 0 It may not be possible to send images recorded with devices other than this camera, or images edited or processed on a PC. Fn Button Assigned with [Wi-Fi] You can perform the following operations by pressing the Fn button assigned with [Wi-Fi] after connecting to Wi-Fi. For information on Fn buttons, refer to page 286.
PAGE 406
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 406 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth [Smartphone] Transfer recorded images to a smartphone connected using Wi-Fi. Getting started: 0 Install “LUMIX Sync” on your smartphone. (l 380) 1 Select the method for sending the images on the camera. ≥ 2 3 4 5 6 406 ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [New Connection] ¨ [Send Images While Recording] or [Send Images Stored in the Camera] Set the destination to [Smartphone].
PAGE 407
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 407 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth 7 When [Send Images While Recording] is selected: Take pictures. 0 This automatically sends the recorded pictures to the specified device as they are taken. ] is displayed in the recording screen of the camera while a file is being sent. 0 To end the connection, follow the steps below: 0[ ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [Yes] When [Send Images Stored in the Camera] is selected: Select one or more images.
PAGE 408
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 408 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth Sending Images on the Camera to a Smartphone with Simple Operations You can transfer pictures to a smartphone connected by Bluetooth just by pressing the Fn button during playback. You can also use the menu to connect easily. 0 Use the Fn button registered with [Send Image (Smartphone)] to operate. In default settings, this is registered in [Q]. For information about the Fn button, refer to page 286.
PAGE 409
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 409 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth Using the menu to transfer easily. ¨[ ]¨[ ] ¨ [Bluetooth] ¨ [Send Image (Smartphone)] Settings: [Single Select]/[Multi Select] 0 If [Single Select], press 21 to select the image and then press or execute. 0 If [Multi Select], use the same operation as with the Fn button to execute. to [PC] Send recorded images to the PC connected with Wi-Fi. Supported OS Windows: Windows 10/Windows 8.
PAGE 410
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 410 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth 0 Create a PC account name (up to 254 characters) and password (up to 32 characters) consisting of alphanumeric characters. A destination folder may not be created if the account name includes nonalphanumeric characters. 0 When the computer name (NetBIOS name for Mac) contains a space (blank character), etc., it may not be recognised.
PAGE 411
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 411 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth 4 Enter the computer name of the PC name you want to connect to (for Mac, the NetBIOS name). 0 For information on how to enter characters, refer to page 376. 5 Select a folder for storing images. 0 Folders sorted by sent date will be created in the selected folder, and images will be saved there. 6 7 Check the send settings and then press or . 0 To change the send setting, press [DISP.].
PAGE 412
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 412 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth 0 If the screen for a user account and password entry appears, enter the one you set on your PC. 0 When the firewall of the OS, security software, etc. is enabled, connecting to the PC may not be possible. 0 During recording, these have priority, so it will take time until sending is complete. 0 If the camera is turned off, or the Wi-Fi is disconnected before sending is completed, then sending will not restart.
PAGE 413
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 413 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth 3 Connect the camera to a printer by Wi-Fi. ≥Select [Via Network] (l 419) or [Direct] (l 423), and then connect. 4 5 Select the destination printer. Select and print images. 0 The procedure for selecting images is the same as the one for when the USB connection cable is connected. (l 449) 0 To terminate the connection, press [ ]. 0 You can also end the connection by pressing the Fn button assigned with [Wi-Fi].
PAGE 414
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 414 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth [Web service] You can use “LUMIX CLUB” to upload recorded images to web services such as social networking sites. Getting started: 0 Register with “LUMIX CLUB”. (l 429) 0 Before sending images to a service, register that web service. (l 431) 1 Select the method for sending images on the camera.
PAGE 415
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 415 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth 4 5 6 Select the web service. Check the send settings and then press or . 0 To change the send settings of images, press [DISP.]. (l 426) When [Send Images While Recording] is selected: Take pictures. 0 This automatically sends the recorded pictures to the specified service as they are taken. 0 [ ] is displayed while a file is being sent.
PAGE 416
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 416 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth 0 During recording, these have priority, so it will take time until sending is complete. 0 If the camera is turned off, or the Wi-Fi is disconnected before sending is completed, then sending will not restart. 0 You may not be able to delete files or use the [Playback] menu while sending. 0 If image sending fails, a report email outlining the failure will be sent to the email address registered in the “LUMIX CLUB”.
PAGE 417
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 417 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth [Cloud Sync. Service] This camera can automatically transfer recorded images to a cloud sync service via “LUMIX CLUB” to send them to a PC or smartphone. To use [Cloud Sync. Service] (As of January 2019) 0 You need to register to the “LUMIX CLUB” (l 429) and set up cloud synchronisation to send images to a cloud folder. To set up cloud synchronisation, use “PHOTOfunSTUDIO”.
PAGE 418
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 418 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth 3 Connect to the cloud sync service. ≥Select [Via Network] and then connect. (l 419) 4 5 Check the send settings and then press or . 0 To change the send settings of images, press [DISP.]. (l 426) When [Send Images While Recording] is selected: Take pictures. 0 This automatically sends the recorded pictures to the cloud sync services as they are taken. 0 [ ] is displayed while a file is being sent.
PAGE 419
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 419 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth Wi-Fi Connections When [New Connection] has been selected in [Wi-Fi Function] in [Wi-Fi] of the [Setup] ([IN/OUT]) menu, select the connection method from either [Via Network] or [Direct] to connect. On the other hand, when you use [Select a destination from History] or [Select a destination from Favorite], the camera connects to the selected device with the previously-used settings.
PAGE 420
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 420 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth [WPS (Push-Button)] (l 420) Press the WPS button on the wireless access point to set up a connection. [WPS (PIN code)] (l 421) Enter a PIN code into the wireless access point to set up a connection. [From List] (l 421) Searches for a wireless access point to use, and connects to this. 0 After selecting [Via Network] once, the camera will connect to the previouslyused wireless access point.
PAGE 421
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 421 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth [WPS (PIN code)] Enter a PIN code into the wireless access point to set up a connection. 1 On the camera screen, select the wireless access point you are connecting to. 2 Enter the PIN code displayed on the camera screen into the wireless access point. or 3 Press of the camera. 0 WPS is a function that allows you to easily configure the settings related to the connection and security of wireless LAN devices.
PAGE 422
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 422 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth Connecting by Manual Input 0 Check the SSID, security type, encryption type, and encryption key of the wireless access point you are using. 1 In the screen in Step 1 of “[From List]”, select [Manual Input]. (l 421) 2 Enter the SSID of the wireless access point you are connecting to, and then select [Set]. 0 For information on how to enter characters, refer to page 376. 3 Select the network authentication type.
PAGE 423
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 423 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth [Direct] Directly connect the camera and the destination device. Select the method for connecting with the destination device. [WPS Connection] [Manual Connection] [WPS (PushButton)] Press the WPS button on the destination device to connect. 0 On the camera, press [DISP.] to extend the connection wait time. [WPS (PIN code)] Enter the PIN code into the camera, and connect.
PAGE 424
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 424 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth Connect to Wi-Fi Using Previously Saved Settings Use the Wi-Fi connection history to connect using the same settings as previously. 1 Display the Wi-Fi connection history. ≥ 2 ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [Select a destination from History] or [Select a destination from Favorite] Select the History item to connect to. 0 Press [DISP.] to confirm details of the connection history.
PAGE 425
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 425 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth Editing Items Registered in Favourite 1 Display items registered to Favourite. 0 ¨[ ]¨[ from Favorite] ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [Select a destination 2 Select the History item to edit in Favourite and then press 1. [Remove from Favorite] — [Change the Order in Favorite] Specify the destination location of the desired item to change the display order.
PAGE 426
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 426 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth Send Settings and Selecting Images Image Send Settings Set the size, file format, and other items for sending the image to the destination device. 1 2 After Wi-Fi connection, the send settings confirmation screen will be displayed, so press [DISP.]. Change the send settings. [Size] Resize the image to send.
PAGE 427
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 427 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth Selecting Images When sending by [Send Images Stored in the Camera], select the images using the following procedure. 1 2 Select [Single Select] or [Multi Select]. Select the image. [Single Select] setting 1 Press 21 to select an image. 2 Press or . 6HW [Multi Select] setting 1 Press 3421 to select an image and then press or . (Repeat this) 0 To cancel the setting, press or again.
PAGE 428
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 428 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth [Wi-Fi Setup] Menu This configures the settings required for the Wi-Fi function. The settings cannot be changed when connected to Wi-Fi. Displaying the [Wi-Fi Setup] menu. ≥ ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Setup] [Priority of Remote Device] This sets either the camera or the smartphone as the priority control device to be used during remote recording.
PAGE 429
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 429 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth To prevent incorrect operation and use of the Wi-Fi function by a third party and to protect personal information in the camera and included with images, protect the Wi-Fi function with a password. [Setup]: Enter any 4-digit numbers as the password. 0 For information on how to enter characters, refer to [Wi-Fi Function Lock] [Network Address] page 376. [Cancel]: Cancel the password.
PAGE 430
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 430 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth Obtain a New Login ID from the Camera From the camera menu, acquire a “LUMIX CLUB” login ID. 1 Follow the menu path. ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Setup] ¨ [LUMIX CLUB] ¨ [Set/Add Account] ¨ [New account] 0 Connect to the network. Proceed to the next page by selecting [Next]. 0 2 Select and set the method for connecting to a wireless access point, and set.
PAGE 431
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 431 ページ２０１９年１月１１日金曜日 15. Wi-Fi/Bluetooth Register a Web Service with “LUMIX CLUB” 0 Confirm web services supported by “LUMIX CLUB” in “FAQ/ Contact us” at the website below. https://lumixclub.panasonic.net/eng/c/lumix_faqs/ Getting started: 0 Make sure that you have created an account on the web service you want to use, and have the login information available. 1 Connect to the “LUMIX CLUB” site using a smartphone or PC. https://lumixclub.panasonic.
PAGE 432
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 432 ページ２０１９年１月１１日 15. Wi-Fi/Bluetooth 3 Enter the login ID or password. 0 For information on how to enter characters, refer to page 376. 4 Select [Exit]. Checking the “LUMIX CLUB” Terms of Use Check the details if the terms of use have been updated, for example.
PAGE 433
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 433 ページ２０１９年１月１１日金曜日 16. Connecting to Other Devices Viewing on a TV You can connect the camera to a TV to view recorded pictures and videos on the TV. Getting started: 0 Turn off the camera and TV. 1 Connect the camera and TV with a commercially available HDMI cable. A [HDMI] socket (Type A) 0 Check the direction of the terminals and plug in/out straight holding onto the 2 3 4 plug.
PAGE 434
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 434 ページ２０１９年１月１１日 16. Connecting to Other Devices 5 Display the playback screen. ≥Press [(]. ≥The recorded images are displayed on the TV. (The monitor and viewfinder of the camera will turn off.) 0 With the default settings, pictures are output at the optimal resolution for the connected TV. The output resolution can be changed in [HDMI Mode (Playback)].
PAGE 435
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 435 ページ２０１９年１月１１日金曜日 16. Connecting to Other Devices Using VIERA Link (HDMI) VIERA Link (HDMI) (HDAVI Control™) is a function that allows you to use your remote control for the Panasonic TV for easy operations when the camera has been connected to a VIERA Link compatible device using an HDMI cable for automatic linked operations. (Not all operations are possible.) 0 To use VIERA Link (HDMI), you need to also configure the settings on the TV.
PAGE 436
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 436 ページ２０１９年１月１１日 16. Connecting to Other Devices 0 Use a “High Speed HDMI cable” with the HDMI logo. Cables that do not comply with the HDMI standards will not work. “High Speed HDMI cable” (Type A–Type A plug, up to 1.5 m (4.9 feet) long) 0 VIERA Link is a unique Panasonic function built on an HDMI control function using the standard HDMI CEC (Consumer Electronics Control) specification.
PAGE 437
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 437 ページ２０１９年１月１１日金曜日 16. Connecting to Other Devices Importing Images to a PC If you connect the camera to a PC, you can copy the recorded images to the PC. For Windows, install the supplied software “PHOTOfunSTUDIO” to copy your images. (l 437) For Mac, copy the files or folders inside the card by dragging and dropping.
PAGE 438
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 438 ページ２０１９年１月１１日 16. Connecting to Other Devices PHOTOfunSTUDIO 10.1 PE This software allows you to manage your images. For example, it allows you to import pictures and videos to your PC and then sort them by recording date, model name. You can also perform operations such as writing images to a DVD, correcting images, and editing videos. Check the following site and then download and install the software. https://panasonic.
PAGE 439
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 439 ページ２０１９年１月１１日金曜日 16. Connecting to Other Devices SILKYPIX Developer Studio SE This software processes and edits RAW images. Edited images can be saved in a format (JPEG, TIFF, etc.) that can be displayed on a PC. Check the following site and then download and install the software. http://www.isl.co.jp/SILKYPIX/english/p/ Operating environment Windows Windows 10 Windows 8.1 Windows 7 Mac OS X v10.6.8 to v10.11 macOS 10.12 to macOS 10.
PAGE 440
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 440 ページ２０１９年１月１１日 16. Connecting to Other Devices Copying Images to a PC Use “PHOTOfunSTUDIO” to copy recorded images to your PC. 0 If you are using a Mac, or in any situation where “PHOTOfunSTUDIO” cannot be installed, refer to page 441. 0 AVCHD videos may not be imported correctly by copying the files or folders. – For Windows, be sure to use “PHOTOfunSTUDIO” to import AVCHD videos. – For Mac, you can use “iMovie” to import AVCHD videos.
PAGE 441
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 441 ページ２０１９年１月１１日金曜日 16. Connecting to Other Devices 2 Press 34 to select [PC(Storage)] and then press . or 0 A message about charging may be displayed. Wait for a while until the 3 message disappears. Copy images to the PC using “ PHOTOfunSTUDIO”. 0 Do not delete or move the copied files and folders in, for example, Windows Explorer. Playback and editing using “PHOTOfunSTUDIO” will become no longer possible.
PAGE 442
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 442 ページ２０１９年１月１１日 16. Connecting to Other Devices Operating environment The camera can be connected to a PC running any of the following OSs which can detect mass storage devices. Windows Windows 10 Windows 8.1 Windows 8 Windows 7 Mac OS X v10.5 to v10.11, macOS 10.12 to macOS 10.14 Supported OS Folder Structure Inside Card For Windows, the drive (“LUMIX”) is displayed in [Computer]. For Mac, the drive (“LUMIX”) is displayed on the desktop.
PAGE 443
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 443 ページ２０１９年１月１１日金曜日 16. Connecting to Other Devices Storing on a Recorder By connecting the camera to a Panasonic Blu-ray disc recorder or DVD recorder, you can store the pictures and videos. Getting started: 0 Turn on the camera and recorder. 0 Images to be stored should be saved on an XQD card and inserted in card slot 1. 1 Connect the camera and recorder with the USB connection cable (C–C or A–C). 0 Plug in/out straight holding onto the plug.
PAGE 444
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 444 ページ２０１９年１月１１日 16. Connecting to Other Devices 0 If [USB Mode] is set to [PC(Storage)] in the [Setup] ([IN/OUT]) menu, the camera will be automatically connected to the recorder without the [USB Mode] selection screen being displayed. (l 362) 0 Do not use any other USB connection cables except the supplied USB connection cables (C–C and A–C). 0 Take care not to turn off the camera while storage is in progress.
PAGE 445
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 445 ページ２０１９年１月１１日金曜日 16. Connecting to Other Devices Tethered Recording If you install the “LUMIX Tether” camera control software on your PC, you can connect the camera to the PC via USB and then control the camera from the PC and record while checking the live view on the PC screen (tethered recording). In addition, you can output via HDMI to an external monitor or TV during tethered recording.
PAGE 446
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 446 ページ２０１９年１月１１日 16. Connecting to Other Devices Operating the Camera from a PC 0 To output via HDMI to an external monitor or TV, connect the camera and external monitor or TV with an HDMI cable. (l 433) Getting started: 0 Turn on the camera and PC. 0 Install “LUMIX Tether” on PC. 1 Connect the camera and PC with the USB connection cable (C–C or A–C). 0 Plug in/out straight holding onto the plug.
PAGE 447
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 447 ページ２０１９年１月１１日金曜日 16. Connecting to Other Devices 0 If [USB Mode] is set to [PC(Tether)] in the [Setup] ([IN/OUT]) menu, the camera will be automatically connected to the PC without the [USB Mode] selection screen being displayed. (l 362) 0 Do not use any other USB connection cables except the supplied USB connection cables (C–C and A–C). 0 The Wi-Fi/Bluetooth functions are not available while there is a PC connection with [PC(Tether)].
PAGE 448
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 448 ページ２０１９年１月１１日 16. Connecting to Other Devices Printing If you connect the camera to a printer that supports PictBridge, you can select pictures on the camera’s monitor and then print them. Getting started: 0 Turn on the camera and printer. 0 Set the print quality and other settings on the printer. 1 Display the playback screen. ≥Press [(]. 0 Images are displayed separately by card 2 slot.
PAGE 449
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 449 ページ２０１９年１月１１日金曜日 16. Connecting to Other Devices 3 Press 34 to select [PictBridge(PTP)] and then press or . 0 A message about charging may be displayed. Wait for a while until the 4 message disappears. Press 21 to select a picture and then press or . PictBridge ≥To print multiple pictures, press 3, set the picture selection method, and then select pictures. 0XOWL 3ULQW 3ULQW [Multi Select] Selects the picture to print.
PAGE 450
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 450 ページ２０１９年１月１１日 16. Connecting to Other Devices 6 Start printing. ≥Select [Print start] and then press or . Setting Items (Print Settings) [Print start] Starts printing. Sets printing with date. [Print with Date] 0 If the printer does not support date printing, the date cannot be printed. [Num.of prints] [Paper Size] [Page Layout] 450 Sets the number of prints to be printed (up to 999). Sets the paper size.
PAGE 451
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 451 ページ２０１９年１月１１日金曜日 16. Connecting to Other Devices 0 If [USB Mode] is set to [PictBridge(PTP)] in the [Setup] ([IN/OUT]) menu, the camera will be automatically connected to the printer without the [USB Mode] selection screen being displayed. (l 362) 0 Do not use any other USB connection cables except the supplied USB connection cables (C–C and A–C). 0 Take care not to turn off the camera while printing is in progress.
PAGE 452
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 452 ページ２０１９年１月１１日 17.
PAGE 453
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 453 ページ２０１９年１月１１日金曜日 17. Materials Using Optional Accessories 0 For information on the external flash, refer to page 223. 0 For information on the external microphone, refer to page 261. 0 For information on the XLR Microphone Adaptor, refer to page 264. 0 Some optional accessories may not be available in some countries.
PAGE 454
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 454 ページ２０１９年１月１１日 17. Materials 0 When the battery in the Battery Grip is used, [ ] is displayed on the screen. 0 You can assign functions of your choice to the [Fn] button, [WB] button, [ISO] button, and [ ] button on the Battery Grip. (l 286) 0 Refer to the operating instructions for the Battery Grip for details.
PAGE 455
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 455 ページ２０１９年１月１１日金曜日 17. Materials AC Adaptor (Optional)/DC Coupler (Optional) With an AC Adaptor (DMW-AC10E: optional) and DC Coupler (DMWDCC16: optional), you can perform recording and playback without worrying about the remaining battery charge. 0 Be sure to purchase both an AC Adaptor and a DC Coupler as a set. They cannot be used independently of one another.
PAGE 456
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 456 ページ２０１９年１月１１日 17. Materials Monitor/Viewfinder Displays 0 The screen is an monitor display example of when [LVF/Monitor Disp. Set] is set to [ ]. Recording Screen  BKT HLG 4K AWB  RAW + FINE L AFS GPS APS-C Fn3  Fn4 × MINI Fn5  Fn6 OFF  24m59s AEL  BKT 60 F4.
PAGE 457
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 457 ページ２０１９年１月１１日金曜日 17.
PAGE 458
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 458 ページ２０１９年１月１１日 17. Materials Programme Shift (l 187) 6 Touch Tab (l 340) Metering mode (l 185) AE Fn3 AEL AE Lock (l 198) 60 Shutter speed (l 66) F4.0 Aperture value (l 66) BKT BKT Touch Zoom (l 130) Aperture Bracket (l 165) F4.
PAGE 459
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 459 ページ２０１９年１月１１日金曜日 17. Materials Control Panel    F 4.0 1/60  ISO AUTO AFS 0 0 FINE 3:2 Fn 999 999 AWB 1 OFF 0 3 Single (l 132) Recording mode (l 68) Burst (l 133) C1 6K/4K Photo (l 137) 1/60 Shutter speed (l 66) Post-Focus (l 168) F4.
PAGE 460
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 460 ページ２０１９年１月１１日 17. Materials 50p 3:2 L Recording file format/ Recording quality (l 240) Picture size/Aspect ratio (l 90) HLG Photo (l 221) Fn button settings (l 286) Fn 4 Photo Style (l 206) AWB AWBc AWBw VÐî Ñ 1 White balance (l 201) 1 i.
PAGE 461
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 461 ページ２０１９年１月１１日金曜日 17. Materials Playback Screen  10:00 1.DEC.2019 100-0001 3 1/999 8m30s  GPS   60 F4.0 ±0 ISO100 APS-C FINE L  1 Playback status Group images (l 276) 1.DEC.
PAGE 462
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 462 ページ 17.
PAGE 463
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 463 ページ２０１９年１月１１日金曜日 17. Materials Detailed information display L ISO 100 STD. 0 FINE sRGB 1 5500 ISO F4.0 60 3/5 1/5 AFS 3:2 Photo Style display 100 0 10:00 1.DEC.2019 10:00 1.DEC.2019 100-0001 100-0001    1 2 3 4 5 0 F4.0 60   White balance display Card slot (l 53) Recording date and time (l 60) Folder/file number (l 442) Recording information (basic) Recording information (advanced) 4/5 1 5500K ISO 100 0 G A B F4.
PAGE 464
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 464 ページ２０１９年１月１１日 17. Materials Message Displays Meanings of main messages displayed on the camera screen, and response methods. Card [Memory Card Error]/[Format this card?] 0 It is a format that cannot be used with the camera. Either insert another card, or back up any necessary data before formatting. (l 55) [Memory Card Error]/[This memory card cannot be used] 0 Use a card compatible with the camera. (l 29) [Insert memory card again.
PAGE 465
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 465 ページ２０１９年１月１１日金曜日 17. Materials Lens [The lens is not attached properly. Do not push lens release button while lens is attached.] 0 Remove the lens once, and then attach it again without pressing the lens release button. (l 56) Turn on the camera again, and if it is still displaying, contact the dealer. [Lens attachment failed. Please make sure the lens is attached correctly.
PAGE 466
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 466 ページ２０１９年１月１１日 17. Materials [Connection failed. Please retry in a few minutes.]/[Network disconnected. Transfer stopped.] 0 Radio waves from the wireless access point are getting weak. Perform the connection closer to the wireless access point. 0 Depending on the wireless access point, connection may be automatically disconnected after specific time has passed. Reconnect the connection again.
PAGE 467
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 467 ページ２０１９年１月１１日金曜日 17. Materials Troubleshooting First, try out the following procedures (l 467 to 477). If the problem is not resolved, it may be improved by selecting [Reset] (l 83) on the [Setup] ([Setting]) menu. Power, Battery The camera turns off automatically. 0 [Power Save Mode] is enabled. (l 51) The battery becomes flat too quickly. 0 When [6K/4K Pre-Burst] or [Pre-Burst Recording] is set, the battery drains faster.
PAGE 468
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 468 ページ２０１９年１月１１日 17. Materials Recording Recording stops before finishing. Cannot record. Cannot use some functions. 0 In high ambient temperatures or if the camera is used for continuous recording, the temperature of the camera will rise. To protect the camera against a rise in temperature, after [ ] is displayed, recording will be stopped, and the following functions will not be available for a time. Wait until the camera cools down.
PAGE 469
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 469 ページ２０１９年１月１１日金曜日 17. Materials Multiple images are recorded at once. 0 When drive mode is set to [ ] (Burst Shot 1) or [ ] (Burst Shot 2), pressing and holding the shutter button will take burst pictures. (l 132) 0 When bracketing is set, then pressing the shutter button records multiple images while automatically changing the settings. (l 162) The subject is not focused properly.
PAGE 470
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 470 ページ２０１９年１月１１日 17. Materials Striping or flicker may appear under lighting such as fluorescent lighting and LED lighting fixture. 0 This is characteristic of CMOS sensors which serve as the camera’s pickup sensors. This is not a malfunction. 0 When using the electronic shutter (l 177), lowering the shutter speed may reduce the effect of the horizontal stripes. 0 If flicker is noticeable when recording pictures, set [Flicker Decrease (Photo)].
PAGE 471
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 471 ページ２０１９年１月１１日金曜日 17. Materials Video Cannot record videos. 0 When using a large capacity card, you may not be able to record for a while after turning on the camera. Video recording stops in the middle. 0 Recording video using the SD card requires an SD card of a supported speed class. Use a compatible SD card. (l 30) In videos, abnormal clicking and buzzing sounds are recorded. The recorded audio is very quiet.
PAGE 472
DC-S1E-DVQX1742_eng.book 472 ページ２０１９年３月１５日金曜日午前１１時４９分 17. Materials Monitor/Viewfinder The monitor/viewfinder turns off when the camera is turned on. 0 If no operations are performed during the set time period, [Auto LVF/Monitor Off] (l 51) is activated, and the Monitor/Viewfinder turns off. 0 When an object or your hand is positioned near the eye sensor, the Monitor display may switch to the Viewfinder display.
PAGE 473
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 473 ページ２０１９年１月１１日金曜日 17. Materials Wi-Fi Function A Wi-Fi connection cannot be established. Radio waves get disconnected. Wireless access point is not displayed. General tips for using a Wi-Fi connection 0 Use within the communication range of the device to be connected. 0 Usage near devices that utilise the 2.4 GHz frequency such as microwave ovens and cordless telephones may result in the radio wave being lost.
PAGE 474
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 474 ページ２０１９年１月１１日 17. Materials When trying to connect to a PC by Wi-Fi, this does not recognise the user name and password, and connection is not possible. 0 Depending on the version of the OS, there are two types of user account (local account/Microsoft account). Ensure you use the local account user name and password. The PC is not recognised when I use a Wi-Fi connection. The camera cannot be connected to the PC using the Wi-Fi function.
PAGE 475
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 475 ページ２０１９年１月１１日金曜日 17. Materials I have forgotten the password for the Wi-Fi. 0 In the [Setup] ([Setting]) menu, [Reset], reset network settings. (l 83) However, all information set in [Wi-Fi Setup] and [Bluetooth] will also be reset. (With the exception of [LUMIX CLUB]) TV, PC, Printer No image on the TV. The TV screen is blurry or not coloured. 0 Confirm the connection with the TV. (l 433) 0 Set the TV input to HDMI input.
PAGE 476
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 476 ページ２０１９年１月１１日 17. Materials The card is not recognised by the PC. (SDXC memory card is used.) 0 Check if your PC supports SDXC memory cards. 0 When connecting the camera to the PC, a message recommending that the card be formatted may be displayed. Do not format the card. 0 If the [Access] displayed on the monitor does not disappear, turn off the camera and disconnect the USB connection cable, and then connect again.
PAGE 477
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 477 ページ２０１９年１月１１日金曜日 17. Materials There is a sound from the lens unit. 0 The lens movement and aperture operation emit sound when turning the camera on or off; this is not a malfunction. 0 This is the sound of aperture operation when brightness changes; this is not a malfunction. A red lamp sometimes lights when the shutter button is pressed halfway. 0 In dark places, the AF Assist Lamp (l 316) lights red to make it easier to focus on a subject.
PAGE 478
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 478 ページ２０１９年１月１１日 17. Materials Cautions for Use The camera Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). 0 If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation. 0 Do not use this unit near cell phones because doing so may result in noise adversely affecting the pictures and/or sound.
PAGE 479
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 479 ページ２０１９年１月１１日金曜日 17. Materials Do not spray the camera with insecticides or volatile chemicals. 0 If the camera is sprayed with such chemicals, the body of the camera may be damaged and the surface finish may peel off. Do not keep products made of rubber, PVC or similar materials in contact with the camera for a long period of time.
PAGE 480
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 480 ページ２０１９年１月１１日 17. Materials Cleaning Before cleaning the camera, remove the battery or the DC Coupler, and disconnect the power plug from the electrical outlet. Then wipe the camera with a dry, soft cloth. 0 When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet cloth, and then with a dry cloth. 0 Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc.
PAGE 481
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 481 ページ２０１９年１月１１日金曜日 17. Materials Removing dirt on the image sensor The image sensor is very precise and delicate, so be sure to observe the following when you do have to clean it yourself. 0 Blow dust off the surface of the image sensor using a commercially available blower. Do not blow the dust off with excessive power. 0 Do not put the blower brush further inside than the lens mount.
PAGE 482
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 482 ページ２０１９年１月１１日 17. Materials Monitor/Viewfinder 0 Do not push hard on the monitor. This may cause irregular colouration or malfunction. 0 If the camera gets cold in the cold place, the picture on the monitor/viewfinder will be slightly darker than usual at first when you turn the camera on. When the interior of the camera warms up, this will return to normal brightness.
PAGE 483
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 483 ページ２０１９年１月１１日金曜日 17. Materials Battery The battery is a rechargeable lithium ion battery. It is highly sensitive to temperature and humidity, and the effect on performance increases as the temperature rises or drops. Always remove the battery after use. 0 Place the removed battery in a plastic bag, and store or keep away from metallic objects (clips, etc.) for storage or transport.
PAGE 484
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 484 ページ２０１９年１月１１日 17. Materials Card Do not leave the card in areas with high temperatures, direct sunlight, or areas prone to electromagnetic waves and static. Do not bend or drop the card. Do not subject the card to strong vibration. 0 Otherwise, the card and recorded data may be damaged. 0 Put the card in the card case or the storage bag after use and when storing or carrying the card.
PAGE 485
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 485 ページ２０１９年１月１１日金曜日 17. Materials When requesting a repair or transferring/disposing of the camera 0 After making a copy of personal information, be sure to delete information, including 0 0 0 0 personal information, such as wireless LAN connection settings that you have registered or saved within the camera with [Reset]/[Delete account]. (l 83 , 432) Reset the settings to protect the personal information. (l 83) Remove the card from the camera.
PAGE 486
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 486 ページ２０１９年１月１１日 17. Materials Image Data 0 Recorded data may be damaged or lost if the camera breaks down due to inappropriate handling. Panasonic will not be liable for any damage caused due to loss of recorded data. Tripod 0 Make sure the tripod is stable when the camera is attached to it. 0 When using a tripod, removal of the battery may not be possible. 0 Make sure that the screw on the tripod is not at an angle when attaching or removing the tripod.
PAGE 487
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 487 ページ２０１９年１月１１日金曜日 17. Materials Use of the Wi-Fi function of the camera is presumed to be in countries where it is sold There is the risk that the camera violates the radio wave regulations if used in countries other than those where it is sold, and Panasonic takes no responsibility for any violations.
PAGE 488
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 488 ページ２０１９年１月１１日 17. Materials Usage Duration, Number of Pictures Listed below are the time lengths available for recording and the numbers of pictures that can be taken when the supplied battery is being used. 0 The numbers of recordable pictures listed here are based on the CIPA (Camera & Imaging Products Association) standard. 0 Using the XQD card from Sony.
PAGE 489
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 489 ページ２０１９年１月１１日金曜日 17. Materials Recording Videos (When Using the Monitor) [AVCHD] (Recording with the recording quality set to [FHD/17M/50i]) Recordable time Approx. 150 min Actual recordable time Approx. 75 min [MP4] (Recording with the recording quality set to [FHD/28M/50p]) Recordable time Approx. 140 min Actual recordable time Approx. 70 min [MP4] (Recording with the recording quality set to [4K/LPCM/150M/50p]) Recordable time Approx.
PAGE 490
DC-S1E-DVQX1742_eng.book 490 ページ２０１９年３月１５日金曜日 17. Materials Number of Recordable Pictures, Recordable Time Listed below are the numbers of pictures and the time lengths of videos that can be recorded on an XQD card and an SD card. 0 The values listed are approximate.
PAGE 491
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 491 ページ２０１９年１月１１日金曜日 17. Materials Available Recording Time (When Recording Videos) 0 “h” is an abbreviation for hour, “m” for minute and “s” for second. 0 The recordable time is the total time of all the videos which have been recorded. 0 [Rec. File Format]: [AVCHD] [Rec Quality] SD card capacity 32 GB 64 GB 128 GB [FHD/28M/ 50p] 2h30m 5h00m 10h00m [FHD/17M/ 50i] 4h10m 8h15m 16h25m [FHD/24M/ 25p] [FHD/24M/ 24p] 2h55m 5h50m 11h40m 0 [Rec.
PAGE 492
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 492 ページ２０１９年１月１１日 17. Materials 0 [Rec. File Format]: [MP4 HEVC] [Rec Quality] [4K/72M/ 30p] [4K/72M/ 25p] [4K/72M/ 24p] XQD card capacity SD card capacity 32 GB 64 GB 120 GB 240 GB 32 GB 64 GB 128 GB 56m00s 1h50m 3h20m 6h40m 57m00s 1h55m 3h55m 0 Depending on the recording conditions and the type of card, the number of recordable pictures and available recording time vary.
PAGE 493
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 493 ページ２０１９年１月１１日金曜日 17.
PAGE 494
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 494 ページ２０１９年１月１１日 17. Materials Menu [Photo]: Default settings [Focus] [AF Custom Setting(Photo)] [Set 1] 3 3 3 [AF Assist Light] [ON] 3 3 3 [ON] 3 3 3 [ON]/[OFF] [Focus Peaking] [Focus Peaking Sensitivity] [1-Area AF Moving Speed] [Photo]: — 3 3 3 [FAST] 3 3 3 [Flash] [Flash Mode] [‰] 3 3 3 [Firing Mode] [TTL] 3 3 3 [Flash Adjust.] [±0 EV] 3 3 3 [Flash Synchro] [1ST] 3 3 3 [Manual Flash Adjust.
PAGE 495
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 495 ページ２０１９年１月１１日金曜日 17. Materials Menu Default settings [Burst Shot 1 Setting] [H] [Burst Shot 2 Setting] [ [Shutter Type] 3 3 3 3 3 3 [MECH.] 3 3 3 [Shutter Delay] [OFF] 3 3 3 [Ex. Tele Conv.
PAGE 496
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 496 ページ２０１９年１月１１日 17. Materials Menu [Filter Effect] [Filter Settings] 3 3 3 [Simultaneous Record w/o [OFF] Filter] 3 3 3 3 3 3 [Auto Exposure in P/A/S/M] [CreativeVideo Combined Set.] [Video]: Default settings [OFF] [ON] [F/SS/ISO/Exposure Comp.
PAGE 497
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 497 ページ２０１９年１月１１日金曜日 17. Materials Menu [Video]: [HDMI Rec Output] [Info Display] [Video]: [Others (Video)] [Image Stabilizer] [Photo Style Settings] [ON] 3 3 3 [Operation Mode] [ ] 3 3 3 [Body(B.I.S.) / Lens(O.I.S.)] [ ] 3 3 3 [When to Activate] [HALF-SHUTTER] 3 3 3 [E-Stabilization (Video)] [OFF] 3 3 3 [Boost I.S. (Video)] [OFF] 3 3 3 [Focal Length Set] 35.
PAGE 498
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 498 ページ２０１９年１月１１日 17. Materials Menu [MF Assist] Default settings [Focus Ring] [ON] 3 3 3 [AF Mode/MF] [OFF] 3 3 3 [Press Joystick] [OFF] 3 3 3 [MF Assist Display] [PIP] 3 3 3 [MF Guide] [ ] 3 3 3 [Focus Ring Lock] [OFF] 3 3 3 [ON] 3 3 3 [Tracking] [ON] 3 3 3 [225-Area] [ON] 3 3 3 [Zone (Vert./ Horz.
PAGE 499
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 499 ページ２０１９年１月１１日金曜日 17. Materials Menu [Custom]: [Q.MENU Settings] [Touch Settings] Default settings [Operation] [Layout Style] [MODE1] 3 3 3 [Front Dial Assignment] [Value] 3 3 3 [Item Customize (Photo)] — 3 3 3 [Item Customize (Video)] — 3 3 3 [Touch Screen] [ON] 3 3 3 [Touch Tab] [OFF] 3 3 3 [Touch AF] [AF] 3 3 3 [Touch Pad AF] [OFF] 3 3 3 [Cursor] 3 3 3 [Joystick] 3 3 3 3 3 3 [Dial] 3 3 3 [DISP.
PAGE 500
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 500 ページ２０１９年１月１１日 17. Materials Menu Default settings [Joystick Setting] [D.FOCUS Movement] 3 3 3 [Illuminated Button] [ON2] 3 3 3 [Video Rec.
PAGE 501
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 501 ページ２０１９年１月１１日金曜日 17. Materials Menu Default settings [Show/Hide Monitor [Control Panel] Layout] [Black Screen] [ON] 3 3 3 [ON] 3 3 3 [Blinking Highlights] [OFF] 3 3 3 [ZEBRA1]/[ZEBRA2]/ [OFF] [OFF] 3 3 3 [SET] — 3 3 3 [Monitor] [MODE2] 3 3 3 [HDMI] [AUTO] 3 3 3 [ON]/[OFF] [OFF] 3 [SET] — 3 [OFF] 3 3 3 [Zebra Pattern] [HLG View Assist] [Sheer Overlay] [I.S.
PAGE 502
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 502 ページ２０１９年１月１１日 17. Materials Menu [Setup]: Default settings [Monitor / Display] [Sleep Mode] [5MIN.] 3 3 [Sleep Mode(Wi-Fi)] [ON] 3 3 [5MIN.
PAGE 503
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 503 ページ２０１９年１月１１日金曜日 17. Materials Menu [HDMI Mode (Playback)] [TV Connection] Default settings [AUTO] 3 [HLG View Assist (HDMI)] [AUTO] 3 [VIERA Link (CEC)] 3 3 3 3 [OFF] [Background Color(Playback)] [Setup]: 3 3 3 [Setting] [Save to Custom Mode] — 3 3 [Load Custom Mode] — 3 3 [3] 3 3 [Edit Title] — 3 3 [How to Reload Custom Mode] — 3 3 — 3 3 [Limit No.
PAGE 504
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 504 ページ２０１９年１月１１日 17. Materials Menu [My Menu]: Default settings [Edit My Menu] [Add] — [Sorting] — [Delete] — [Display from My Menu] [OFF] 3 3 [Rotate Disp.
PAGE 505
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 505 ページ２０１９年１月１１日金曜日 17.
PAGE 506
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 506 ページ２０１９年１月１１日 17. Materials Menu [Focus Peaking] iA P A S M [ON]/[OFF] 3 3 3 3 3 [SET] 3 3 3 3 3 3 3 3 3 3 [1-Area AF Moving Speed] [Photo]: [Flash] [Flash Mode] 3 3 3 3 [Firing Mode] 3 3 3 3 [Flash Adjust.] 3 3 3 3 [Flash Synchro] 3 3 3 3 [Manual Flash Adjust.] 3 3 3 3 [Auto Exposure Comp.
PAGE 507
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 507 ページ２０１９年１月１１日金曜日 17. Materials iA P A S M [Burst Shot 1 Setting] Menu 3 3 3 3 3 [Burst Shot 2 Setting] 3 3 3 3 3 [Shutter Type] 3 3 3 3 3 [Shutter Delay] 3 3 3 3 3 [Ex. Tele Conv.
PAGE 508
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 508 ページ２０１９年１月１１日 17. Materials P A S M [Vignetting Comp.] Menu 3 3 3 3 3 [Diffraction Compensation] 3 3 3 3 3 [Filter Effect] 3 3 3 3 3 [Simultaneous Record w/ o Filter] 3 3 3 3 3 3 3 3 3 [Filter Settings] iA [Auto Exposure in P/A/S/M] [F/SS/ISO/Exposure Comp.] 3 3 3 3 3 [CreativeVideo Combined [White Balance] Set.
PAGE 509
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 509 ページ２０１９年１月１１日金曜日 17. Materials Menu iA P A S M [Sound Rec Level Disp.] 3 3 3 3 3 3 [Sound Rec Level Adj.] 3 3 3 3 3 3 [Sound Rec Level Limiter] 3 3 3 3 3 3 [Wind Noise Canceller] 3 3 3 3 3 3 [Wind Cut] 3 3 3 3 3 3 [Mic Socket] 3 3 3 3 3 3 [Special Mic.] 3 3 3 3 3 3 [XLR Mic Adaptor Setting] 3 3 3 3 3 3 [Sound Output] 3 3 3 3 3 3 3 3 3 3 3 3 [Operation Mode] 3 3 3 3 3 3 [Body(B.I.
PAGE 510
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 510 ページ２０１９年１月１１日 17. Materials Specifications The specifications are subject to change for performance enhancement. Digital camera body (DC-S1): Information for your safety Power source: Power consumption: 9.0 V 6.3 W (when recording with the monitor) (When using the interchangeable lens (S-R24105)) 4.
PAGE 511
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 511 ページ２０１９年１月１１日金曜日 17. Materials Recording format for still images File format for still images JPEG (DCF compliant, Exif 2.31 compliant) / RAW / HLG photo (CTA-2072 compliant) File format for 6K/4K 6K photo: MP4 (H.265/HEVC, AAC (2ch)) photos 4K photo: MP4 (H.
PAGE 512
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 512 ページ２０１９年１月１１日 17. Materials Recording format for video Video format AVCHD Progressive / AVCHD / MP4 / MP4 HEVC Audio format AVCHD Dolby Audio™ (2ch) MP4 AAC (2ch), LPCM (2ch, 48 kHz/16 bit) MP4 HEVC AAC (2ch) Image quality for videos [Rec. File Format]: [AVCHD], [MP4], [MP4 HEVC] Refer to page 241 of this document for details. Refer to page 254 of this document for details about High Speed Video.
PAGE 513
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 513 ページ２０１９年１月１１日金曜日 17.
PAGE 514
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 514 ページ２０１９年１月１１日 17. Materials Burst recording Mechanical shutter/ Electronic front curtain 9 frames/second (high speed, AFS/MF), 6 frames/second (high speed, AFC), 5 frames/second (medium speed), 2 frames/second (low speed) Electronic shutter 9 frames/second (high speed, AFS/MF), 5 frames/second (high speed, AFC), 5 frames/second (medium speed), 2 frames/second (low speed) Number of burst picture frames [FINE] / [STD.
PAGE 515
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 515 ページ２０１９年１月１１日金曜日 17. Materials Interface USB SuperSpeed USB3.1 GEN1 Type C Supports USB Power Delivery (9.0 V/3.0 A) ¢ Data from the PC cannot be written to the camera using the USB connection cable. HDMI HDMI Type A [REMOTE] ‰ 2.5 mm jack [MIC] ‰ 3.5 mm jack Headphones ‰ 3.5 mm jack Flash Synchro Yes Splash Resistant Yes Dimensions / Mass Dimensions Approx. 148.9 mm (W)k110.0 mm (H)k96.7 mm (D) (5.86q (W)k4.33q (H)k3.
PAGE 516
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 516 ページ２０１９年１月１１日 17. Materials Wi-Fi Compliance standard IEEE 802.11a/b/g/n/ac (standard wireless LAN protocol) Frequency range used (central frequency) 2412 MHz to 2472 MHz (1 to 13ch) 5180 MHz to 5320 MHz (36/40/44/48/52/56/60/64ch) 5500 MHz to 5700 MHz (100/104/108/112/116/120/124/ 128/132/136/140ch) Encryption method Wi-Fi compliant WPATM / WPA2TM Access method Infrastructure mode Bluetooth Compliance standard Bluetooth v4.
PAGE 517
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 517 ページ２０１９年１月１１日金曜日 17. Materials Battery charger (Panasonic DMW-BTC14): Information for your safety Input: Output: Operating temperature: 9.0 V 3.0 A 8.4 V 3.1 A 0 oC to 40 oC (32 oF to 104 oF) AC adaptor (Panasonic DVLV1001Y): Information for your safety Input: Output: Operating temperature: 100–240 V 50/60 Hz 0.7 A 5V 3.0 A, 9 V 3.
PAGE 518
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 518 ページ２０１９年１月１１日 17. Materials 35 mm full-frame interchangeable lens: S-R24105 “LUMIX S 24-105 mm F4 MACRO O.I.S.” Mount Leica Camera AG L-Mount Focal length f=24 mm to 105 mm Lens construction 16 elements in 13 groups (2 aspherical ED lenses, 2 aspherical lenses, 1 UED lens, 2 ED lenses) Aperture type 9 diaphragm blades/Circular aperture diaphragm Maximum aperture F4.
PAGE 519
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 519 ページ２０１９年１月１１日金曜日 17. Materials Index Numerics 1 Shot "6K/4K PHOTO" ..................... 291 1 Shot RAW+JPG.............................. 291 1 Shot Spot Metering......................... 291 1-Area (AF) ........................................ 114 1-area AF moving speed ................... 318 1-Area+ (AF)...................................... 114 225-Area (AF).................................... 111 6K/4K Burst .......................................
PAGE 520
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 520 ページ２０１９年１月１１日 17. Materials Card Slot Change ......................292, 302 Centre marker .................................... 348 Centre-weighted metering.................. 185 Charge ................................................. 40 Cleaning............................................. 480 Clock Set.............................................. 60 Cloud Limit ......................................... 426 Cloud sync service.............................
PAGE 521
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 521 ページ２０１９年１月１１日金曜日 17. Materials Flash Adjust....................................... 231 Flash mode........................................ 227 Flash Synchro.................................... 230 Flash synchro socket......................... 224 Flicker decrease (photo).................... 322 Flicker decrease (video) .................... 327 Fn button ........................................... 286 Fn Button Set.....................................
PAGE 522
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 522 ページ２０１９年１月１１日 17. Materials Level gauge adjustment..................... 360 Live view boost .................................. 349 Load Custom Mode............................ 306 Location logging................................. 399 Lock lever setting ............................... 341 Long exposure NR ............................. 313 Looped focus frame ........................... 340 Low illumination AF............................ 100 Luminance Level........
PAGE 523
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 523 ページ２０１９年１月１１日金曜日 17. Materials Power Save LVF Shooting .................. 51 Power Save Mode ............................... 51 Pre-Burst recording ........................... 141 Preview .............................................. 195 Print ................................................... 448 Programme AE mode ........................ 186 Programme Shift................................ 187 Protect ...............................................
PAGE 524
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 524 ページ２０１９年１月１１日 17. Materials Storage (recorder).............................. 443 T W Thumbnail screen .............................. 274 Time lapse video................................ 371 Time zone .......................................... 366 Touch AE ............................................. 88 Touch AF ...................................121, 340 Touch Pad AF ............................122, 340 Touch screen .......................................
PAGE 525
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 525 ページ２０１９年１月１１日金曜日 17. Materials Trademarks and Licences 0 L-Mount is a trademark or registered trademark of Leica Camera AG. 0 XQD is a trademark of Sony Corporation. 0 SDXC Logo is a trademark of SD-3C, LLC. 0 The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo 0 0 0 0 0 0 0 0 0 0 0 are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
PAGE 526
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 526 ページ２０１９年１月１１日 17. Materials 0 The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. 0 The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance®. 0 The Wi-Fi Protected Setup™ Logo is a certification mark of Wi-Fi Alliance®.
PAGE 527
DC-S1_OI_DVQX1742ZA_E_eng_1901xx.book 527 ページ２０１９年１月１１日金曜日 17. Materials This product incorporates the following software: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation, (3) the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0), (4) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL V2.
PAGE 528
Panasonic Corporation Operating Instructions Web Site: http://www.panasonic.