Operating Instructions for advanced features Digital Camera Model No. DC-GX880 Please read these instructions carefully before using this product, and save this manual for future use.
Finding the information you need In this “Operating Instructions for advanced features”, you can find the information you need from the following pages. By clicking a page number, you can jump to the linked page and quickly find the information. Search from “Contents” Click this icon to jump to “Contents”.
How to use this manual About the indication of the applicable mode Applicable modes: The icons indicate the modes available for a function. • Black icons: Applicable modes • Grey icons: Unavailable modes ∫ About the symbols in the text : MENU Wi-Fi Indicates that the menu can be set by pressing [MENU/SET] button. : Indicates that the Wi-Fi setting can be made by pressing [Wi-Fi] button. : Tips for skilful use and points for recording. : Conditions in which a particular function cannot be used.
Contents Finding the information you need..............................................................................2 How to use this manual.............................................................................................3 Contents by Function ................................................................................................9 1. Before Use Care of the camera .................................................................................................
3. Recording Modes Taking Pictures using the Automatic Function (Intelligent Auto Mode) ............................................................................................58 • Taking handheld shots of night scenes ([iHandheld Night Shot]) ...................61 • Combining pictures into a single picture with rich gradation ([iHDR]).............62 • Taking pictures with customised colour, defocus control, and brightness settings........................................................................
• Recording using [Post Focus] ......................................................................132 • Selecting the desired focus area and saving a picture .................................135 • Merging multiple pictures to widen the focus range (Focus Stacking)..........136 Select a Drive Mode..............................................................................................138 • Burst Mode ...................................................................................................
• [Setup] menu ................................................................................................213 • [Playback] menu ...........................................................................................221 10. Using the Wi-Fi function What you can do with the Wi-Fi® function .............................................................245 Wi-Fi function ........................................................................................................
Saving still pictures and motion pictures on a Recorder .......................................294 Printing the Pictures ..............................................................................................295 Enjoying 3D pictures .............................................................................................298 12. Others Optional accessories.............................................................................................301 Monitor Display ..............................
Contents by Function Recording Recording Recording Mode .............................. P42 Self Shot Mode ................................ P65 [Preview].......................................... P82 Panorama Shot Mode ..................... P84 [4K PHOTO] .................................. P122 [Post Focus] .................................. P132 [Time Lapse Shot] ......................... P144 [Stop Motion Animation] ................P147 [Multi Exp.].....................................P192 [Silent Mode] ..
Motion Picture Motion Picture [Rec Format].................................. P166 [Rec Quality] .................................. P166 Motion pictures in 4K ..................... P164 Recording still pictures while recording motion pictures ..............P169 [Snap Movie] .................................P171 Audio [Mic Level Adj.] ..............................P202 [Wind Noise Canceller] ..................P203 Screen settings [Mic Level Disp.] ............................P202 [Center Marker] ............
Wi-Fi Connect “Image App” .................................. P248 [WPS (Push-Button)] ............. P277, 279 Direct connection...........................P279 In combination with other devices Playing back pictures on a TV .......P258 Printing images ..............................P264 Sending images to an AV device ............................................P265 Sending images to a PC ................P266 Sending images to a web service ...........................................P268 Using [Cloud Sync.
1. Before Use Care of the camera Do not subject to strong vibration, shock, or pressure. • The lens, monitor, or external case may be damaged if used in the following conditions. It may also malfunction or image may not be recorded if you: – Drop or hit the camera. – Press hard on the lens or the monitor. This camera is not dust/drip/water proof. Avoid using the camera in places with a lot of dust, water, sand, etc.
1. Before Use Standard Accessories Check that all the accessories are supplied before using the camera. • The accessories and their shape will differ depending on the country or area where the camera was purchased. For details on the accessories, refer to “Basic Operating Instructions”. • Battery Pack is indicated as battery pack or battery in the text. • microSD Memory Card, microSDHC Memory Card and microSDXC Memory Card are indicated as card in the text. • The card is optional.
1.
1. Before Use 18 20 21 19 22 23 24 27 28 29 30 31 32 33 Tripod mount (P327) • It may not be possible to attach and securely 30 fasten a tripod with a screw length of 5.5 mm (0.22 inch) or more to the camera. Doing so may also damage the camera.
1. Before Use ∫ Lens H-FS12032 H-FS35100 1 2 3 4 1 5 2 3 4 H-PS14042 1 1 2 3 4 5 6 7 6 7 3 4 Lens surface Zoom ring (P152) Contact point Lens fitting mark (P32) Focus ring (P111) Zoom lever (P152) Focus lever (P111) • The interchangeable lens (H-FS12032) does not have a focus ring, but you can use manual focus by operating the camera.
1. Before Use About the Lens This unit can use the dedicated lenses compatible with the Micro Four ThirdsTM System lens mount specification (Micro Four Thirds mount). You can also use a lens of any of the following standards by attaching a mount adaptor.
2. Getting Started/Basic Operations Attaching the Shoulder Strap • We recommend attaching the shoulder strap when using the camera to prevent it from dropping. 1 Pass the shoulder strap through the shoulder strap eyelet on the camera body. A: Shoulder strap eyelet 2 3 4 Pass the end of the shoulder strap through the ring in the direction of the arrow and then pass it through the stopper. Pass the end of the shoulder strap through the hole on the other side of the stopper.
2. Getting Started/Basic Operations Charging the Battery Use the dedicated AC adaptor (supplied), USB connection cable (supplied) and battery. • The battery is not charged when the camera is shipped. Charge the battery before use. • Charge the battery only when it is inserted in the camera.
2. Getting Started/Basic Operations Inserting the Battery 1 1: Slide the release lever in the direction of the arrow. 2: Open the card/battery door. • Always use genuine Panasonic batteries. • If you use other batteries, we cannot guarantee the quality of this product. 2 Being careful about the battery orientation, securely insert it all the way in, and then check that it is locked by the lever A. To remove the battery, move the lever A in the direction of the arrow. 3 1: Close the card/battery door.
2. Getting Started/Basic Operations Charging • Charge the battery in areas with an ambient temperature, between 10 oC and 30 oC (50 oF and 86 oF) (same as the battery temperature), is recommended. Insert the battery into this unit. Check that this unit is turned off. A Connect the USB connection cable F USB connection cable (supplied) (supplied) to the [USB/CHARGE] socket. • Check the direction of the terminals and • Place the camera in an upright position, plug in/out straight holding onto the plug.
2. Getting Started/Basic Operations ∫ About the charging lamp Lit red: Off: Blinking red: Charging. Charging has completed. (When charging is complete, disconnect the camera from the power outlet or computer.) Charging error. (P312) ∫ Charging time When using the AC adaptor (supplied) Charging time Approx. 130 min • The indicated charging time is for when the battery has been discharged completely. The charging time may vary depending on how the battery has been used.
2. Getting Started/Basic Operations • Do not leave any metal items (such as clips) near the contact areas of the power plug. Otherwise, a fire and/or electric shocks may be caused by short-circuiting or the resulting heat generated. • Do not use any other USB connection cables except the supplied one. This may cause malfunction. • Do not use any other AC adaptors except the supplied one. • Do not use a USB extension cable.
2. Getting Started/Basic Operations Approximate operating time and number of recordable pictures By CIPA (Camera & Imaging Products Association) standard When a Panasonic microSDHC memory card and the supplied battery are used ∫ Recording still pictures When the interchangeable lens (H-FS12032) is used Number of recordable pictures Approx. 210 pictures Recording time Approx. 105 min When the interchangeable lens (H-FS35100) is used Number of recordable pictures Approx.
2. Getting Started/Basic Operations ∫ Recording motion pictures [AVCHD] (Recording with picture quality set to [FHD/17M/50i]) When the interchangeable lens (H-FS12032) is used Recordable time Approx. 60 min Actual recordable time Approx. 30 min When the interchangeable lens (H-FS35100) is used Recordable time Approx. 60 min Actual recordable time Approx. 30 min When the interchangeable lens (H-PS14042) is used Recordable time Approx. 60 min Actual recordable time Approx.
2. Getting Started/Basic Operations [MP4] (Recording with picture quality set to [4K/100M/25p]) When the interchangeable lens (H-FS12032) is used Recordable time Approx. 40 min Actual recordable time Approx. 20 min When the interchangeable lens (H-FS35100) is used Recordable time Approx. 40 min Actual recordable time Approx. 20 min When the interchangeable lens (H-PS14042) is used Recordable time Approx. 40 min Actual recordable time Approx.
2. Getting Started/Basic Operations Inserting and Removing the Card (optional) • Check that this unit is turned off. 1 1: Slide the release lever in the direction of the arrow. 2: Open the card/battery door. • Always use genuine Panasonic batteries. • If you use other batteries, we cannot guarantee the quality of this product. 2 Push it securely all the way until you hear a “click” while being careful about the direction in which you insert it.
2. Getting Started/Basic Operations Card Information The following cards which conform to the SD standard can be used with this unit. (These cards are indicated as card in the text.) • This unit is compatible with UHS-I UHS Speed Class 3 standard microSDHC/microSDXC memory cards. • Operation of the cards on the left has been confirmed with Panasonic’s cards.
2. Getting Started/Basic Operations Access to the card The access indication displays red when pictures are being recorded on the card. • During access (image writing, reading and deleting, formatting etc.), do not turn this unit off, remove the battery, card or disconnect the AC adaptor (optional). Furthermore, do not subject the camera to vibration, impact or static electricity. The card or the data on the card may be damaged, and this unit may no longer operate normally.
2.
2. Getting Started/Basic Operations • Depending on the recording conditions and the type of card, the number of recordable pictures and available recording time vary. • MP4 motion pictures with a [Rec Quality] size of [4K]: Recording stops when the continuous recording time exceeds 5 minutes. When using a microSDHC memory card, files are split into smaller motion picture files for recording and playback if the file size exceeds 4 GB. (You can continue to record motion pictures without interruption.
2. Getting Started/Basic Operations Attaching/Removing the Lens By changing the lens, you will increase your picture taking-options and further your enjoyment of the camera. • Check that the camera is turned off. • When attaching or detaching the interchangeable lens (H-FS12032/H-FS35100), retract the lens barrel. • Change lenses where there is not a lot of dirt or dust. Refer to P322 when dirt or dust gets on the lens. Detaching the lens • Attach the lens cap.
2. Getting Started/Basic Operations Zoom operations When using the interchangeable lens (H-FS12032/ H-FS35100) Rotate the zoom ring of the lens. T W When using the interchangeable lens (H-PS14042) Move the zoom lever of the lens.
2. Getting Started/Basic Operations Attaching the Lens Hood When recording into strong backlight, irregular reflection may occur within the lens. The lens hood reduces the inclusion of unwanted light in the recorded images and lowers the drop in contrast. The lens hood cuts off excess lighting and improves the picture quality. • The interchangeable lens (H-FS12032/H-PS14042) does not have a lens hood.
2. Getting Started/Basic Operations To attach the lens hood (flower shape) that came with the interchangeable lenses (H-FS35100) Hold the lens hood with your fingers placed as shown in the picture (A). • Do not hold the lens hood in a way that twists or bends it. (B) 1 Align the mark C ( ) on the lens hood with the mark on the tip of the lens.
2. Getting Started/Basic Operations Setting Date/Time (Clock Set) • The clock is not set when the camera is shipped. 1 Turn the camera on. • If the language select screen is not displayed, proceed to step 4. 2 3 4 5 Press [MENU/SET]. Press 3/4 to select the language, and press [MENU/SET]. Press [MENU/SET]. Press 2/1 to select the items (year, month, day, hour, minute), and press 3/4 to set. A: Time at the home area B: Time at the travel destination To set the display order and the time display format.
2. Getting Started/Basic Operations 7 8 9 When [The clock setting has been completed.] is displayed, press [MENU/SET]. When [Please set the home area] is displayed, press [MENU/SET]. Press 2/1 to select the home area, and then press [MENU/SET]. • When an interchangeable lens (H-FS12032/H-FS35100) is used and the lens barrel is retracted, recording is not possible (a message will be displayed). Rotate the zoom ring to extend the lens. (P39) Re-adjusting the clock Select [Clock Set] in the [Setup] menu.
2. Getting Started/Basic Operations Basic Operations Tips for taking good pictures Hold the camera gently with both hands, keep your arms still at your side and stand with your feet slightly apart. • Do not cover the flash, AF Assist lamp A, microphone B, or speaker C with your fingers or other objects. ∫ Detects orientation of camera (Direction Detection Function) This function detects the vertical orientation when you record with the camera vertically orientated.
2. Getting Started/Basic Operations Extending/retracting the lens [when the interchangeable lens (H-FS12032/H-FS35100) is attached] ∫ How to Extend the Lens Rotate the zoom ring in the direction of arrow 1 from position A (the lens is retracted) to position B [12 mm to 32 mm (H-FS12032), 35 mm to 100 mm (H-FS35100)] to extend the lens. Example: H-FS12032 • When the lens barrel is retracted, images cannot be recorded.
2. Getting Started/Basic Operations Adjust the angle of the monitor • Be careful not to catch your finger, etc. in the monitor. • When rotating the monitor, be careful not to apply too much force. This may cause scratches and malfunctions. • When not using this unit, close the monitor completely back to the original position. ∫ Recording at various angles • Do not cover the AF Assist Lamp with your fingers or other objects.
2. Getting Started/Basic Operations Shutter button (Taking pictures) The shutter button works in two steps. To take a picture, press it. Press the shutter button halfway to focus. A Aperture value B Shutter speed C Focus indication • Aperture value and shutter speed are displayed. (It will flash in red if the correct exposure is not achieved, except when set to flash.) • Once the subject is in focus, the focus indication is displayed. (When the subject is not in focus, the indication flashes.) 3.
2. Getting Started/Basic Operations Mode dial (Selecting a Recording Mode) Select the mode by rotating the mode dial. • Rotate the mode dial slowly to select the desired mode.
2. Getting Started/Basic Operations Control Dial Rotating the control dial: Selection of items or setting of values etc., is performed. In these operating instructions, turning the control dial is indicated as follows. Cursor buttons/[MENU/SET] button Pressing the cursor button: Selection of items or setting of values etc., is performed. Pressing [MENU/SET]: Confirmation of setting contents, etc., is performed.
2. Getting Started/Basic Operations [DISP.] button (Switching the displayed information) Press [DISP.] to switch the information displayed on the screen. • If the information on the screen is not displayed any longer because no operation was performed for some time, press the [DISP.] button or touch the screen to display the information again.
2. Getting Started/Basic Operations In Playback Mode Detailed information display With information 4:3 L 1/98 98 Histogram display Without information (Highlight display)¢ 60 F3.5 0 AWB ISO 200 WB AFS P F3.5 60 STD. 0 ISO200 10:00 1.DEC.2018 F3.5 60 0 200 AWB 4:3 L s RGB 1/98 100-0001 100-0001 Without information ¢ This is displayed if [Highlight] (P209) in the [Custom] menu is set to [ON].
2. Getting Started/Basic Operations Touch screen (Touch operations) Touch screen of this unit is capacitive. Touch the panel directly with your bare finger. ∫ Touch To touch and release the touch screen. Fn4 Fn5 Fn6 Fn7 SNAP Fn8 ∫ Drag A movement without releasing the touch screen. A ∫ Pinch (enlarge/reduce) Pinch the touch screen apart (enlarge) or together (reduce) with two fingers. B 2.0X • Touch the screen with the clean and dry finger.
2. Getting Started/Basic Operations Taking Pictures Using the Touch Function Taking pictures using the Touch Shutter function Applicable modes: Just by touching the subject you want as your point of focus, the camera will focus on the subject and take the picture automatically. 1 Touch [ ]. 2 Touch [ × ]. • Icon will change to [ ], and taking a picture with the Touch Shutter function becomes possible. AE 3 Touch the subject you wish to focus on, and then take a picture.
2. Getting Started/Basic Operations Easily Optimising the Brightness for a Specified Area (Touch AE) Applicable modes: You can easily optimise the brightness for a touched position. When the face of the subject appears dark, you can brighten the screen according to the brightness of the face. 1 Touch [ ]. 2 Touch [ AE ]. • The setting screen for the brightness optimisation position is displayed. • [Metering Mode] is set to [ AE ], which is used exclusively for the Touch AE.
2. Getting Started/Basic Operations [REC. SETTING RESET] button (Resetting the recording settings) You can restore the default recording settings by pressing this button. Try pressing this button when the function in use stops working or is not working as it should. While the recording screen is displayed: Press [REC. SETTING RESET]. ンユヤハチヴユヵヵリワヨチンユヴユヵ • When the recording settings are reset, the following setting is also reset. – Drive mode • The [Face Recog.] and [Profile Setup] settings are not reset.
2. Getting Started/Basic Operations Setting menu items You can either operate the buttons or touch the monitor to set menu items. 1 Press [MENU/SET]. [Rec] (P182) This menu lets you set the aspect ratio, number of pixels, 4K Photo and other aspects of the pictures you are recording. [Motion Picture] (P202) This menu lets you set the [Rec Format], [Rec Quality], and other aspects for motion picture recording.
2. Getting Started/Basic Operations 3 Press 3/4 of the cursor button to select the setting and press [MENU/SET]. • The setting can also be selected by rotating the control dial. • Depending on the menu item, its setting may not appear or it may be displayed in a different way. (In touch operation) Touch the Setting to set. • There are functions that cannot be set or used depending on the modes or menu settings being used on the camera. ∫ Switching to other menus 1 2 3 Press 2.
2. Getting Started/Basic Operations Calling frequently-used menus instantly (Quick Menu) By using the Quick Menu, some of the menu settings can be easily found. • The features that can be adjusted using Quick Menu are determined by the mode or a display style the camera is in. 1 Press [ ] to display the Quick Menu. • You can also use the button as a function button. (P54) 2 Rotate the control dial to select the menu item, and press 4 or 3.
2. Getting Started/Basic Operations Customising the Quick Menu settings When [Q.MENU] (P211) in the [Custom] menu is set to [CUSTOM], the Quick Menu can be changed as desired. Up to 15 items can be set to the Quick Menu. 1 Press 4 to select [ ] and then press [MENU/SET]. 4:3 L 2 3 AUTO Press 3/4/2/1 to select the menu item in the top row and then press [MENU/SET]. Press 2/1 to select the empty space in the bottom row and then press [MENU/SET].
2. Getting Started/Basic Operations Assigning frequently used functions to the buttons (function buttons) You can assign recording functions, etc. to specific buttons and icons. • Some functions cannot be assigned depending on the function button. • Some functions may not be available depending on the mode or displayed screen. 1 Select the menu.
2. Getting Started/Basic Operations Using the function buttons during recording You can use assigned functions by pressing a function button when recording. ∫ Using function buttons with touch operations 1 2 Touch [ ]. Touch [Fn4], [Fn5], [Fn6], [Fn7] or [Fn8].
2. Getting Started/Basic Operations – [Silent Mode] (P204) – [Peaking] (P207) – [Histogram] (P208) – [Guide Line] (P208) – [Zebra Pattern] (P209) [Custom] menu – [Monochrome Live View] (P210) – [Rec Area] (P211) – [Step Zoom] (P156) – [Zoom Speed] (P156) – [Touch Screen] (P212) ¢ Function button settings at the time of purchase. • Operations of the cursor button, [MENU/SET], and the control dial are disabled when [Cursor Button Lock] is set. Press the function button again to enable them.
2. Getting Started/Basic Operations Entering Text 1 Press 3/4/2/1 to select text and then press [MENU/SET] to register. • Move the cursor to [ ] and then press [MENU/SET] to switch text between [A] (capitals), [a] (lower case), [1] (numbers) and [&] (special characters). • To enter the same character again, rotate the control dial right to move the cursor.
3. Recording Modes Taking Pictures using the Automatic Function (Intelligent Auto Mode) Recording Mode: In this mode, the camera makes the optimal settings for the subject and scene, so we recommend it when you wish to leave the settings to the camera and record without thinking about them. 1 Set the mode dial to [¦]. • The camera will switch to either the most recently used of Intelligent Auto Plus Mode or Intelligent Auto Mode. At the time of purchase, the mode is set to Intelligent Auto Plus Mode.
3. Recording Modes The camera detects scenes automatically (Scene Detection) ( : When taking pictures, : When recording motion pictures) [i-Portrait] [i-Scenery] [i-Macro] [iHandheld Night Shot]¢2 [i-Food] [i-Baby]¢3 ¦ [i-Night Portrait]¢1 [i-Night Scenery] [i-Sunset] [i-Low Light] ¢1 Only displayed when the built-in flash is open. ¢2 Only displayed when [iHandheld Night Shot] is set to [ON]. (P61) ¢3 When [Face Recog.
3. Recording Modes Intelligent Auto Plus Mode allows you to adjust some settings such as the brightness and colour tone while also using Intelligent Auto Mode for other settings so that you can record images more suited to your preferences.
3. Recording Modes Taking handheld shots of night scenes ([iHandheld Night Shot]) Recording Mode: When [ ] is detected while taking handheld night shots, pictures of the night scenery will be taken at a high burst speed and composed into a single picture. This mode is useful if you want to take stunning night shots with minimal jitter and noise, without using a tripod. MENU > [Rec] > [iHandheld Night Shot] > [ON]/[OFF] • The angle of view will be slightly narrower.
3. Recording Modes Combining pictures into a single picture with rich gradation ([iHDR]) Recording Mode: When there is, for example, strong contrast between the background and the subject, multiple still pictures are recorded with differing exposures and combined to create a single still picture rich in gradation. [iHDR] works automatically as needed. When it does, [ ] is displayed on the screen. MENU > [Rec] > [iHDR] > [ON]/[OFF] • The angle of view will be slightly narrower.
3. Recording Modes Taking pictures with customised colour, defocus control, and brightness settings Recording Mode: ∫ Setting colour 1 Press 1 to display the setting screen. 2 Rotate the control dial to adjust colour. • Press [MENU/SET] to return to the recording screen. • The colour setting will return to the default level (centre point) when this unit is turned off or the camera is switched to another Recording Mode.
3. Recording Modes ∫ Setting brightness 1 Press 3 to display the setting screen. 2 Rotate the control dial to adjust brightness. • You can adjust the Exposure Bracket setting by pressing 3/4 while the brightness setting screen is displayed. (P143) • Press [MENU/SET] to return to the recording screen. OFF +1 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 Change the settings by using the touch screen 1 Touch [ ]. 2 Touch the item you want to set.
3. Recording Modes Taking Pictures of Yourself ([Self Shot]) Applicable modes: If you rotate the monitor, Self Shot Mode is activated. You can easily take pictures of yourself while looking at the screen. In Self Shot Mode... • Deciding on a composition is easier because recording is performed while looking at the screen. • Pictures with different poses and facial expressions can be taken at once by increasing the number of pictures to be recorded. • Automatically enables the touch operation.
3. Recording Modes OFF No Effect ([Soft Skin]) Makes people’s faces look brighter and their skin tones look softer. ([Filter Select]) Adds an image effect (filter) suited for Self Shot Mode. Changes the defocus setting for the background of detected faces. OFF ([Background Control]) [ ON ](Defocus): Defocuses the background of detected faces. (Faces further from the camera, however, will be defocused in the background.) [ OFF ON ](Clear): Records faces and the background with clarity.
3. Recording Modes 5 Decide on your poses while looking at the monitor. • The AF area is displayed around the subject’s face by the Face/Eye Detection function. (If [š] in AF Mode is not available with the current Recording Mode, an available focus setting for each Recording Mode will be used.) 6 Press the shutter button halfway to focus and then press it fully to take the picture. 2 • Look at the lens when recording.
3. Recording Modes Taking pictures of yourself in 4K Photo Mode ([4K Burst (Wide-angle)]) You can switch to 4K Photo Mode and take pictures of yourself. In Self Shot Mode, you can take pictures with [4K Burst (Wide-angle)], a setting that allows you to include a wider background. 1 2 Rotate the monitor to enable Self Shot Mode. OFF Touch [ ]. No Effect OFF OFF 3 Select and touch the recording method.
3. Recording Modes Taking pictures with nightscapes in the background in Self Shot Mode ([Night Self Shot]) Applicable modes: This merges a portrait taken with the flash and pictures of the background taken with burst recording into a single picture in which both the person and background look bright. 1 2 Slide the flash open lever. 3 Touch [ Rotate the monitor to enable Self Shot Mode. ] to display the setting screen.
3. Recording Modes • When you switch to [Night Self Shot], settings will change to suit the scene.
3. Recording Modes Taking panorama pictures in Self Shot Mode You can also take panorama pictures in Self Shot Mode. By recording with Panorama Shot Mode, you can enjoy a variety of self-portraits, such as those with your friends or those incorporating a wide background. 1 2 3 4 5 6 7 Set the mode dial to [ ]. Rotate the monitor to enable Self Shot Mode. • Instructions explaining how to take a picture will be displayed. If no instructions are displayed, proceed to step 4.
3. Recording Modes ∫ Technique for Panorama Shot Mode Swivel the camera around its centre when moving it in the recording direction. Hold the camera with both hands, taking care not to shake it. Example: • When the focal length is long, such as when a telephoto lens is attached, move the camera slowly. • If the camera shakes too much, pictures may not be able to be recorded, or the recorded panorama picture may become narrower (smaller). • Move the camera towards the edge of the range you wish to record.
3. Recording Modes • When the [Soft Skin] is set – If you set the effect level to [2] or higher, display of the recording screen will be delayed more than usual and the screen will look as if frames are dropping. – Since recording with this effect requires extra image processing, if you take a picture with the effect level set to [2] or higher, it takes some time until you can take the next picture.
3. Recording Modes Changing the way the shutter is released In [Shutter], you can select the way you start recording without pressing the shutter button. We recommend that you avoid using the shutter button when, for example, jitter occurs during shutter operation. • You can start recording with the shutter button regardless of the [Shutter] setting. When using [ ] (Shutter button only), only the shutter button can be used. • For information on [ ] (Touch), refer to P47.
3. Recording Modes Face Shutter The shutter is released when a face detected by the Face/Eye Detection function is covered with a hand or other object and then detected again. 1 Display the yellow frame of Face/Eye Detection. 2 Cover your face with your hand or other object so that the yellow frame disappears for a moment. 3 When you move your hand away and the yellow frame appears, the shutter is released.
3. Recording Modes Taking Pictures with Automatically Adjusted Aperture and Shutter Speed (Programme AE Mode) Recording Mode: The camera automatically sets the shutter speed and the aperture value according to the brightness of the subject. You can take pictures with greater freedom by changing various settings in the [Rec] menu. 1 2 Set the mode dial to [ ]. Press the shutter button halfway and display the aperture value and shutter speed value on the screen. 3.
3. Recording Modes Programme Shift In Programme AE Mode, you can change the preset aperture value and shutter speed without changing the exposure. This is called Programme Shift. You can make the background more blurred by decreasing the aperture value or record a moving subject more dynamically by slowing the shutter speed when taking a picture in Programme AE Mode. 1 2 Press the shutter button halfway and display the aperture value and shutter speed value on the screen.
3. Recording Modes Taking Pictures by Specifying the Aperture/ Shutter Speed Recording Mode: (Example: In Manual Exposure Mode) Aperture value SS F 8 15 30 4.0 5.6 5.6 30 0 60 125 8.0 11 +3 A Exposure meter B Aperture value C Shutter speed Small It becomes easier to defocus the background. Large It becomes easier to maintain focus as far as the background. Slow It becomes easier to express movement. Fast It becomes easier to freeze movement.
3. Recording Modes Aperture-Priority AE Mode When you set the aperture value, the camera automatically optimises the shutter speed for the brightness of the subject. 1 2 Set the mode dial to [ ]. Rotate the control dial to set the aperture value. A Aperture value B Exposure meter SS F 60 4.0 30 5.6 15 8.0 8 11 4 16 8.0 • When using a lens having an aperture ring, set the position of the aperture ring to [A] to activate the control dial setting.
3. Recording Modes Manual Exposure Mode Determine the exposure by manually setting the aperture value and the shutter speed. 1 2 Set the mode dial to [ ]. Rotate the control dial to set the aperture value and shutter speed. A Exposure meter B Aperture value C Shutter speed D Manual Exposure Assistance • Each press of the cursor button 3 switches between Aperture Setting and Shutter Speed Setting. SS F 8 15 30 4.0 5.6 5.6 30 0 60 125 8.0 11 +3 Available Shutter Speed (Sec.
3. Recording Modes ∫ About [T] (Time) If you set the shutter speed to [T] (Time) and fully press the shutter button, an exposure starts. (Continues up to approximately 60 seconds.) If you press the shutter button again, the exposure will end. • It can only be used with Manual Exposure Mode. • When taking pictures with the shutter speed set to [T], we recommend using a tripod and taking pictures remotely by connecting the camera to a smartphone to prevent camera shake.
3. Recording Modes Confirm the Effects of Aperture and Shutter Speed (Preview Mode) Applicable modes: The effects of aperture and shutter speed can be checked by using the Preview Mode. • Confirm the effects of aperture: You can check the depth of field (effective focus range) before taking a picture by closing the diaphragm blades to the aperture value you set. • Confirm the effects of shutter speed: Movement can be confirmed by displaying the actual picture that will be taken with that shutter speed.
3. Recording Modes Easily set aperture/shutter speed for suitable exposure (One Push AE) Applicable modes: When the exposure setting is too bright or too dark, you can use one push AE to achieve a suitable exposure setting. How to tell if the exposure is not adequate • If the aperture values and shutter speed blink red when the shutter button is pressed halfway. • If the Manual Exposure Assistance (P80) is anything other than when in Manual Exposure mode. 1 2 Set a function button to [One Push AE].
3. Recording Modes Taking panorama pictures (Panorama Shot Mode) Recording Mode: Consecutive photos taken while the camera is moved are combined to form a panorama. 1 Set the mode dial to [ ]. • After the screen that asks you to check the recording direction is displayed, the horizontal/vertical guidelines will be displayed. 2 3 Press the shutter button halfway to focus. Press the shutter button fully and move the camera in a small circle in the direction of the arrow on the screen.
3. Recording Modes ∫ Changing the recording direction and angle of view (image size) of panorama pictures MENU > [Rec]> [Panorama Settings] [Direction] [Picture Size] Sets the recording direction. Sets the angle of view (image size). [STANDARD]/[WIDE] • The number of recording pixels in the horizontal and vertical directions of the panorama picture varies depending on the image size, the recording direction and the number of combined pictures. The maximum number of pixels is shown below.
3. Recording Modes ∫ About playback Pressing 3 will start scrolling playback automatically in the same direction as the recording. 1/98 • The following operations can be performed during scrolling playback. 3 Start panorama playback/Pause¢ 4 Stop ¢ When the playback is paused, you can scroll forwards and backwards by dragging the screen. When the scroll bar is touched, the playback position jumps to the touched position.
3. Recording Modes Taking Pictures that match the Scene being recorded (Scene Guide Mode) Recording Mode: If you select a scene to suit the subject and recording conditions with reference to the example images, the camera will set optimal exposure, colour, and focus, allowing you to record in a manner appropriate to the scene. 1 2 Set the mode dial to [ ]. Press 2/1 to select the scene. • The scene can also be selected by dragging an example image or the slide bar. 3 Press [MENU/SET].
3. Recording Modes Types of Scene Guide Mode Displaying the description of each scene and recording tips Press [DISP.] while the scene selection screen is displayed. • When it is set to the guide display, detailed explanations and tips for each scene are displayed. Normal display Guide display [Silky Skin] List display [Backlit Softness] • The smoothing effect is applied to the part that has a similar tone to the complexion of a subject, as well.
3. Recording Modes [Warm Glowing Nightscape] [Artistic Nightscape] [Glittering Illuminations] [Handheld Night Shot] • Do not move the unit during the continuous shooting after pressing the shutter button. • The angle of view will be slightly narrower. [Clear Night Portrait] [Soft Image of a Flower] • We recommend using a tripod and the self-timer. • When [Clear Night Portrait] is selected, keep the subject still for about 1 second after taking the picture.
3. Recording Modes Taking pictures of children or portraits with optimal settings Recording Mode: The camera optimises the exposure, colour tone, focus, and other settings for subjects. • The following items cannot be set because the camera automatically adjusts them to the optimal setting. – Items other than the picture quality adjustment in [Photo Style] – [Sensitivity] – [Metering Mode] – [HDR] – [Multi Exp.
3. Recording Modes Portrait Mode The brightness of the face is adjusted and the background is defocused to create a clear portrait. Set the mode dial to [ ]. • If you are using a lens with the zoom function, you can enhance the effect by zooming in as much as possible and closing the distance between the camera and the subject. ∫ Setting [Soft Skin] and [Slimming Mode] You can apply the same [Soft Skin] and [Slimming Mode] settings as those specified for Self Shot Mode. 1 Touch the item.
3. Recording Modes Taking Pictures with different image effects (Creative Control Mode) Recording Mode: This mode records with additional image effects. You can set the effects to add by selecting example images and checking them on the screen. 1 2 Set the mode dial to [ ]. Press 3/4 to select the image effects (filters). A preview display • You can also select the image effects (filters) by touching the example images.
3. Recording Modes Types of image effects Displaying the description of each image effect Press [DISP.] while the image effect selection screen is displayed. • When it is set to the guide display, explanations for each picture effect are displayed.
3. Recording Modes ∫ Setting the type of defocus ([Miniature Effect]) 1 Touch [ 2 Press 3/4 or 2/1 to move the in-focus portion. 3 4 ], and then touch [ ]. • You can also move the in-focus portion by touching the screen on the recording screen. • Touching [ ] allows you to set the recording orientation (defocus orientation). Rotate the control dial to change the size of in-focus portion. • The portion can also be enlarged/reduced by pinching out/pinching in (P46) the screen. • Pressing [DISP.
3. Recording Modes ∫ Setting the position and size of the light source ([Sunshine]) 1 Touch [ 2 Press 3/4/2/1 to move the centre position of the light source. ], and then touch [ ]. • The position of the light source can also be moved by touching the screen. Point for when placing the centre of the light source A more natural appearance can be created by placing the centre of the light source outside the image. 3 4 Rotate the control dial to adjust the size of the light source.
3.
3. Recording Modes Taking a picture with a blurred background (Defocus Control) 1 2 3 Press 3 to display the brightness setting screen. Press [Fn1] to display the blurriness setting screen. Rotate the control dial to set. • If you press [MENU/SET], you can return to the recording screen. • Pressing [ ] on the blurriness setting screen will cancel the setting. SS F 500 250 125 60 30 4.0 5.6 8.
4. Focus, Brightness (Exposure) and Colour tone Settings Adjusting Focus Automatically By setting the optimum Focus Mode or Auto Focus Mode for the subject or recording condition, you can let the camera automatically adjust focus in various scenes. 1 Set the [Focus Mode] to [AFS], [AFF] or [AFC]. • The Focus Mode will be set. (P100) 2 3 Press 2 ( ). Press 2/1 to select AF Mode and then press [MENU/SET]. • The Auto Focus Mode will be set. (P102) 4 Press the shutter button halfway.
4. Focus, Brightness (Exposure) and Colour tone Settings • If you zoom in/out after focusing on a subject, the focus may lose its accuracy. In that case, re-adjust the focus. Subjects and recording conditions which are difficult to focus • Fast-moving subjects, extremely bright subjects or subjects without contrast. • When recording subjects through windows or near shiny objects. • When it is dark or when jitter occurs.
4. Focus, Brightness (Exposure) and Colour tone Settings Focus Mode (AFS/AFF/AFC) Applicable modes: The method for achieving focus when the shutter button is pressed halfway is set. MENU > [Rec] > [Focus Mode] Item [AFS] (Auto Focus Single) Scene (recommended) Subject is still (Scenery, anniversary photograph, etc.) “AFS” is an abbreviation of “Auto Focus Single”. Focus is set automatically when the shutter button is pressed halfway. Focus will be fixed while it is pressed halfway.
4. Focus, Brightness (Exposure) and Colour tone Settings When recording using [AFF], [AFC] • It may take time to focus on the subject when you operate the zoom from Wide to Tele or suddenly change the subject from a distant one to a nearby one. • Press the shutter button halfway again when it is difficult to focus on the subject. • While the shutter button is pressed halfway, shake may be seen on the screen.
4. Focus, Brightness (Exposure) and Colour tone Settings Auto Focus Mode Applicable modes: This allows the focusing method that suits the positions and number of the subjects to be selected. ([Face/Eye Detection]) ([Tracking]) ([49-Area]) , etc. ([Custom Multi]) ([1-Area]) ([Pinpoint]) The camera automatically detects the person’s face and eyes. An eye closer to the camera will be in focus, while the exposure will be optimised for the face.
4. Focus, Brightness (Exposure) and Colour tone Settings Pressing the shutter button halfway to adjust the composition When the subject is not in the centre of the composition in [Ø], you can bring the subject into the AF area, fix the focus and exposure by pressing the shutter button halfway, move the camera to the composition you want with the shutter button pressed halfway, and then take the picture. (Only when the focus mode is set to [AFS].
4. Focus, Brightness (Exposure) and Colour tone Settings About [š] ([Face/Eye Detection]) When the camera detects a face, the AF area and the mark indicating the eye to be in focus are displayed. A The eye to be in focus Yellow: When the shutter button is pressed halfway, the frame turns green when the camera is focused. White: Displayed when more than one face is detected. Other faces that are the same distance away as faces within the yellow AF areas are also focused.
4. Focus, Brightness (Exposure) and Colour tone Settings Setting the shape of the AF area ([Custom Multi]) Selecting from 49 AF areas, you can freely set the optimum shape of the AF area for the subject. 1 2 3 Press 2 ( ). Select a Custom Multi icon ([ ], etc.), and press 3. Press 2/1 to select a setting.
4. Focus, Brightness (Exposure) and Colour tone Settings When selecting [ ]/[ ]/[ ] Button operation Touch operation 3/4/2/1 Touching Description of operation Moves the position Pinching in/out [DISP.] When selecting [ Restores the default setting [Reset] ヤヒ ]/[ ヤビ ]/[ ヤピ Changes the size (3 levels) ] Touch operation Drag your finger over the parts you want to set as AF areas. • If you touch one of the selected AF areas, the selection of the area will be cancelled.
4. Focus, Brightness (Exposure) and Colour tone Settings Setting up position of the AF area/changing size of the AF area Applicable modes: When [š], [ ], [Ø], or [ ] in Auto Focus Mode is selected, you can change the position and size of the AF area. • Perform the operation after cancelling the touch shutter function. • You can also display the AF area setting screen by touching the recording screen.
4. Focus, Brightness (Exposure) and Colour tone Settings When selecting [ ] You can set the focus position by selecting the group of AF areas. The 49 AF areas are divided into groups, each consisting of 9 areas (on the edge of the screen, 6 or 4 areas). 1 2 3 4 Examples of group Press 2 ( ). Select [ ] and press 4. • AF area setting screen is displayed. Press 3/4/2/1 to select an AF area group. Press [MENU/SET] to set. • Only [i] display (centre point of selected group) will remain on the screen.
4. Focus, Brightness (Exposure) and Colour tone Settings Optimising the focus and brightness for a touched position Applicable modes: You can optimise the focus and brightness for the position you have touched. 1 Select the menu. (P50) MENU 2 > [Custom] > [Touch Settings] > [Touch AF] > [AF+AE] Touch the subject you want to optimise the brightness for. • AF area setting screen is displayed. (P107) • The brightness optimisation position is displayed on the ュリヴヱハ 5HVHW centre of the AF area.
4. Focus, Brightness (Exposure) and Colour tone Settings Adjusting Focus Manually Applicable modes: Use this function when you want to fix the focus or when the distance between the lens and the subject is determined and you do not want to activate Auto Focus. 1 Select the menu. (P50) MENU 2 3 > Press 2 ( [Rec] > [Focus Mode]> [MF] ). Press 3/4/2/1 to adjust the focus position, and press [MENU/SET]. • The assist screen is displayed, enlarging the area.
4. Focus, Brightness (Exposure) and Colour tone Settings When using an interchangeable lens (H-FS35100) with a focus ring Rotate to A side: A Focuses on nearby subject B Rotate to B side: Focuses on distant subjects When using the interchangeable lens having a focus lever (H-PS14042) Move to C side: Focuses on nearby C subject Move to D side: Focuses on distant D subjects • The focusing speed varies depending on how far you move the focus lever.
4. Focus, Brightness (Exposure) and Colour tone Settings 5 Press the shutter button halfway. • You can also perform the same operation by pressing [MENU/SET]. • If you have enlarged the picture by rotating the focus ring or moving the focus lever, the assist screen will close approximately 10 seconds after the operation. • MF Assist or MF guide may not display depending on the lens used, but you can display MF Assist by direct operation of the camera, using the touch screen or a button.
4. Focus, Brightness (Exposure) and Colour tone Settings Fixing the Focus and the Exposure (AF/AE Lock) Applicable modes: This is useful when you want to take a picture of a subject outside the AF area or the contrast is too strong and you cannot achieve appropriate exposure. 1 Assign [AF/AE LOCK] to a function button. (P54) • You can assign [AF/AE LOCK] only to [Fn1], [Fn2], or [Fn3]. 2 3 Align the screen with the subject. Press and hold the function button to lock the focus and exposure.
4. Focus, Brightness (Exposure) and Colour tone Settings Compensating the Exposure Applicable modes: Use this function when you cannot achieve appropriate exposure due to the difference in brightness between the subject and the background. 1 2 Press 3 (È). Rotate the control dial to compensate the exposure. A Exposure Bracket B Exposure Compensation • You can perform the operations below while the exposure compensation screen is displayed.
4. Focus, Brightness (Exposure) and Colour tone Settings • You can set the exposure compensation value in the range between j5 EV and i5 EV. You can set a value between j3 EV and i3 EV while recording motion picture or performing recording with the 4K Photo or Post Focus function. • When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of the flash will automatically be set to the level appropriate to the selected Exposure Compensation.
4. Focus, Brightness (Exposure) and Colour tone Settings Setting the Light Sensitivity Applicable modes: This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure enables pictures to be taken even in dark places without the resulting pictures coming out dark. 1 Select the menu. (P50) MENU 2 3 > [Rec] > [Sensitivity] Select the ISO sensitivity by rotating the control dial. Press [MENU/SET] to set.
4. Focus, Brightness (Exposure) and Colour tone Settings Characteristics of the ISO sensitivity 200 Recording location (recommended) When it is light (outdoors) 25600 When it is dark Shutter speed Slow Fast Noise Less Increased Increased Less Jitter of the subject • For information on the focus range of flash when [AUTO] is set, refer to P159. • Cannot select [ ] in the following cases: – Shutter-Priority AE Mode – Manual Exposure Mode • When [Multi Exp.
4. Focus, Brightness (Exposure) and Colour tone Settings Adjusting the White Balance Applicable modes: In sunlight, under incandescent lights or in other such conditions where the colour of white takes on a reddish or bluish tinge, this item adjusts to the colour of white which is closest to what is seen by the eye in accordance with the light source. 1 2 Press 1 ( ). Select the White Balance by rotating the control dial.
4. Focus, Brightness (Exposure) and Colour tone Settings You can set the colour temperature manually for taking natural pictures in different lighting conditions. [ ] 6500K 1 Press 3. 2 Press 3/4 to select the colour temperature and then press [MENU/SET]. • You can set a colour temperature from [2500K] to [10000K]. 3 Press [MENU/SET] to set. Under fluorescent lighting, LED lighting fixture etc.
4. Focus, Brightness (Exposure) and Colour tone Settings Finely adjusting the White Balance You can finely adjust the White Balance when you cannot acquire the desired hue by setting the White Balance. 1 2 3 Select the White Balance and then press 4. Press 3/4/2/1 to fine-adjust the White Balance. 2 : A (AMBER: ORANGE) 1 : B (BLUE: BLUISH) 3 : G (GREEN: GREENISH) 4 : M (MAGENTA: REDDISH) • You can also make fine adjustments by touching the White Balance graph. • Pressing [DISP.
4. Focus, Brightness (Exposure) and Colour tone Settings White Balance Bracket Bracket setting is performed based on the adjustment values for the White Balance fine adjustment, and 3 pictures with different colours are automatically recorded when the shutter button is pressed once. 1 2 Fine-adjust the White Balance in step 2 of “Finely adjusting the White Balance” and then perform the bracket setting by rotating the control dial.
5. 4K Photo and Drive Settings Recording 4K Photos Applicable modes: The camera allows you to take burst pictures of 8 million pixels (approx.) at 30 frames/ second. After taking these pictures, you can save the desired moment extracted from their burst file. • Use a UHS Speed Class 3 card to record 4K photos. (P28) 1 Press [ ]. • The same operation can be performed by pressing the [ ] button (4), using 2/1 to select a 4K photo icon ([ ], etc.), and pressing 3.
5. 4K Photo and Drive Settings [ ] [4K Burst] For capturing the best shot of a fast-moving subject (e.g., sports, aeroplanes, trains) Audio recording: Not available [ ] [4K Burst(S/S)] “S/S” is an abbreviation of “Start/Stop”. [ ] [4K Pre-Burst] For capturing unpredictable photo opportunities (e.g., plants, animals, children) Audio recording: Available¢ For recording as needed whenever a photo opportunity arises (e.g.
5. 4K Photo and Drive Settings 1 [ ] [4K Burst(S/S)] “S/S” is an abbreviation of “Start/Stop”. 2 Press the shutter button fully. C Start (First) D Stop (Second) E Recording is performed • If you are using Auto Focus, [Continuous AF] will work during recording. Focus will be adjusted continuously. Press the shutter button fully again to stop recording. Adding markers to select and save pictures You can add markers if you press [Fn1] during recording.
5. 4K Photo and Drive Settings ∫ Cancelling 4K Photo ]. In step 2, select [ • The operation can be cancelled by pressing the [ ([Single]) or [ ]. ] button (4) and then selecting [ ] Battery drainage and camera temperature • The camera stops operating for self-protection in the manner described below when overheated due to, for example, high ambient temperature or continuous 4K photo recording. Wait until the camera cools down.
5. 4K Photo and Drive Settings Selecting pictures from 4K burst file and saving This section describes how to select pictures from a 4K burst file and save them. For information on how to record 4K burst files, refer to P122. 1 Select an image with the [ ] icon on the playback screen, and press 3. • You can also perform the same operation by touching the icon [ ]. • If the image was recorded with [ ] ([4K Pre-Burst]), proceed to step 3. 2 Drag the slide bar to make a rough selection of scenes.
5. 4K Photo and Drive Settings Position of the displayed frame Fn3 Button operation Touch operation 2/1 Dragging Select / > [MENU/SET] Description of operation Selects a frame you want to save as a picture • You can select a frame from 60 frames (continuous burst time of approximately 2 seconds). Displays the preceding or following 45 frames in slide view. • Pressing the same button again will display the frames following the next ones or the ones preceding the previous ones.
5.
5. 4K Photo and Drive Settings ∫ Selecting and saving pictures on the TV screen • Set [HDMI Mode (Play)] (P217) to [AUTO] or [4K]. When connecting to a TV that does not support 4K motion picture, select [AUTO]. • Set [VIERA Link] in [TV Connection] to [OFF]. • If you display 4K burst files on a TV connected to the camera, they will be displayed only on the 4K burst playback screen.
5. 4K Photo and Drive Settings ∫ Scenes not suitable for the 4K Photo function Recording in extremely bright locations or indoors When subjects are recorded in an extremely bright place or under fluorescent/LED lighting, the colour tone or brightness of the image may change, or horizontal stripes may appear on the screen. Lowering the shutter speed may reduce the effect of the horizontal stripes.
5. 4K Photo and Drive Settings • The following menu items are disabled: [Rec] [Picture Size]/[Quality]/[Bracket]/[iHandheld Night Shot]/[iHDR]/[HDR]/ [Panorama Settings]/[Shutter Type]/[Flash]/[Extended ISO]/[Long Shtr NR]/ [Shading Comp.]/[Ex. Tele Conv.]/[Color Space]/[Face Recog.]/[Profile Setup] [Custom] [Rec Area] [Setup] [Economy] ([ ] ([4K Pre-Burst]) only) • The angle of view is narrower when recording in a mode other than [4K Burst (Wide-angle)].
5. 4K Photo and Drive Settings Controlling Focus After Recording (Post Focus/Focus Stacking) Applicable modes: The camera allows you to take 4K burst pictures while shifting the focus to different areas. After taking these pictures, you can select the desired focus area. This function is suited for recording still objects. It is also possible to select multiple focus areas and create a single merged picture. (Focus Stacking) 4K burst recording while automatically shifting the focus.
5. 4K Photo and Drive Settings 4 Press the shutter button fully to start recording. • The focus point changes automatically while recording. When the icon (B) disappears, recording automatically ends. From the time you press the shutter button halfway until the end of recording: • Maintain the same distance to the subject and the same composition. • Do not operate the zoom. • A motion picture in MP4 format will be recorded. (Audio will not be recorded.
5. 4K Photo and Drive Settings • When using [Post Focus], the angle of view is narrower.
5. 4K Photo and Drive Settings Selecting the desired focus area and saving a picture 1 Select an image with the [ press 3. ] icon on the playback screen, and • You can also perform the same operation by touching the icon [ 2 ]. Touch the desired focus area. Fn1 • A picture in which the selected area is in focus will be displayed. • If a picture that is in focus is not available for the selected area, a red frame will be displayed. You cannot save a picture in this case.
5. 4K Photo and Drive Settings Merging multiple pictures to widen the focus range (Focus Stacking) A Focus: closer B Focus: farther away 1 2 Touch [ (P135) ] in step 2 of “Selecting the desired focus area and saving a picture”. • You can also perform the same operation by pressing [Fn1]. Touch the merging method. [Auto Merging] Automatically selects pictures that are suited to be merged, and merges them into a single picture. • Priority will be given to pictures with closer focus.
5. 4K Photo and Drive Settings 3 (When [Range Merging] is selected) Touch the desired focus area. • Specify at least two areas. • In-focus areas between the two areas will also be selected, and the combined in-focus area will be indicated. • Grey areas indicate areas that may, if selected, cause the merged picture to look unnatural and areas that cannot be selected. Fn3 6HW &DQFHO ュリヴヱハ 5HVHW • Touch the focus area again to cancel the selection.
5. 4K Photo and Drive Settings Select a Drive Mode Applicable modes: You can change what the camera will do when you press the shutter button. 1 2 Press 4 ( ). Press 2/1 to select the drive mode, and then press [MENU/SET]. H A Drive mode 3 1 [Single] When the shutter button is pressed, only one picture is recorded. 2 [Burst] (P139) Recordings are made in succession while the shutter button is pressed. 3 [4K PHOTO] (P122) When the shutter button is pressed, a 4K photo is recorded.
5. 4K Photo and Drive Settings Burst Mode ∫ Setting the burst rate After pressing 3 in step 2 on P138, press 2/1 to select the burst rate, and press [MENU/SET]. Burst speed (pictures/ second) LV M LV L [H] (High speed) [M] (Middle speed) [L] (Low speed) Electronic Front Curtain 5.
5. 4K Photo and Drive Settings Focusing in Burst Mode The way focus is achieved varies according to the focus mode (P100) setting and the [Focus/Release Priority] (P206) setting in the [Custom] menu. Focus mode [AFS] [AFF]/[AFC]¢1 [MF] [Focus/Release Priority] [FOCUS] Focus At the first picture [RELEASE] [FOCUS] Normal focusing¢2 [RELEASE] Predicted focusing¢3 — Focus set with Manual Focus ¢1 When the subject is dark, the focus is fixed to that of the first picture.
5. 4K Photo and Drive Settings Self-timer ∫ Setting the self-timer After pressing 3 in step 2 on P138, press 2/1 to select the time, and press [MENU/SET]. 10 10 2 Picture is taken 10 seconds after shutter is pressed. After 10 seconds the camera takes 3 pictures at about 2 seconds intervals. Picture is taken 2 seconds after shutter is pressed. • When using a tripod, etc., this setting is a convenient way to avoid the jitter caused by pressing the shutter button.
5. 4K Photo and Drive Settings Taking Pictures While Adjusting a Setting Automatically (Bracket Recording) Applicable modes: You can take multiple pictures while automatically adjusting a setting by pressing the shutter button. 1 Select the menu. (P50) MENU > [Rec] > [Bracket]> [Bracket Type] (Exposure Bracket) (White Balance Bracket) 2 Press the shutter button to perform recording while adjusting the exposure.
5. 4K Photo and Drive Settings Not available in these cases: • Bracket recording is disabled in the following cases.
5. 4K Photo and Drive Settings Taking Pictures Automatically at Set Intervals ([Time Lapse Shot]) Applicable modes: The camera can automatically take pictures of subjects such as animals or plants as time elapses and create a motion picture. • Set the date and time settings in advance. (P36) • Pictures taken with Time Lapse Shot are displayed as a set of group pictures. (P179) 1 Select the menu. (P50) MENU > [Rec] > [Time Lapse Shot] [Now] Starts the recording by fully-pressing the shutter button.
5. 4K Photo and Drive Settings 2 3 Press 3/4 to select [Start] and then press [MENU/SET]. Press the shutter button fully. • The recording starts automatically. • During recording standby, the power will turn off automatically if no operation is performed for a certain period. The Time Lapse Shot is continued even with the power turned off. When the recording start time arrives, the power turns on automatically. To turn on the power manually, press the shutter button halfway.
5. 4K Photo and Drive Settings • This function is not for use in a security camera. • [Time Lapse Shot] is paused in the following cases. – When the charge on the battery runs out – Turning the camera off During [Time Lapse Shot], you can replace the battery and the card, and then restart by turning on this unit. (Note that pictures taken after the restart will be saved as a separate set of group pictures) Turn off this unit when replacing the battery or the card.
5. 4K Photo and Drive Settings Creating Stop Motion Pictures ([Stop Motion Animation]) Applicable modes: A stop motion picture is created by splicing pictures together. • Set the date and time settings in advance. (P36) • Pictures taken with [Stop Motion Animation] are displayed as a set of group pictures. (P179) 1 Select the menu. (P50) MENU > [Rec] > [Stop Motion Animation] [Auto Shooting] [ON] Takes pictures automatically at a set recording interval.
5. 4K Photo and Drive Settings 6 7 Touch [ ] to end the recording. • It can also be ended by selecting [Stop Motion Animation] from the [Rec] menu and then pressing [MENU/SET]. • When [Auto Shooting] is set to [ON], select [End] on the confirmation screen. (If [Pause] has been selected, press the shutter button fully to resume the recording.) 30 Select the methods for creating a motion picture. • The recording format is set to [MP4]. [Rec Quality] Sets the quality of a motion picture.
5. 4K Photo and Drive Settings • Automatic recording may not take place at set intervals because recording takes time under certain recording conditions, such as when the flash is used for recording. • When creating motion pictures with a [Rec Quality] setting of [4K/30p], [4K/25p] or [4K/24p], recording times are limited to 29 minutes and 59 seconds. – When using a microSDHC Memory Card, you cannot create motion pictures with a file size exceeding 4 GB.
6. Stabiliser, Zoom and Flash Image Stabiliser Applicable modes: The camera detects jitter during recording and automatically corrects it, so you can record images with reduced jitter. A lens which supports the stabiliser function is required. • The interchangeable lens (H-FS12032/H-FS35100/H-PS14042) supports the Optical Image Stabiliser function. • When using an interchangeable lens with O.I.S. switch, stabiliser function is activated if the O.I.S. switch of the lens is set to [ON].
6. Stabiliser, Zoom and Flash Preventing jitter (camera shake) When the jitter alert [ ] appears, use [Stabilizer], a tripod or the self-timer (P141). • Shutter speed will be slower particularly in the following cases. Keep the camera still from the moment the shutter button is pressed until the picture appears on the screen. We recommend using a tripod. – Slow Sync. – Slow Sync.
6. Stabiliser, Zoom and Flash Taking Pictures with the Zoom Optical zoom Applicable modes: You can zoom-in to make people and objects appear closer or zoom-out to record landscapes, etc. T side: Enlarges distant subject W side: Widens angle of view Interchangeable lens with a zoom ring (H-FS12032/ H-FS35100) Interchangeable lens that supports the power zoom (electrically operated zoom) (H-PS14042) Interchangeable lens that does not support the zoom Rotate the zoom ring. T W Move the zoom lever.
6. Stabiliser, Zoom and Flash Raising the telescopic effect [Ex. Tele Conv.] Applicable modes: Extra Tele Conversion enables you to take pictures that are further enlarged without deteriorating the picture quality. When taking pictures [Ex. Tele Conv.] ([Rec]) 1.2k: [ 1.4k: [ 2.0k: [ • Set the picture size to [M]or [S] (picture sizes indicated with [A] or [›]. When recording motion pictures [Ex. Tele Conv.
6. Stabiliser, Zoom and Flash ∫ Increasing the zoom magnification in steps • This can be used only when recording pictures. 1 Select the menu. (P50) > MENU 2 3 4 [Rec] > [Ex. Tele Conv.] > [ZOOM] Set a function button to [Zoom Control]. (P54) Press the function button. Press 2/1 or 3/4. 3/1: Tele (Enlarges distant subject) 4/2: Wide (Widens angle of view) • The zoom operation is terminated when the function button is pressed again or a certain amount of time passes. 4:3 4:3 EX1.0x EX2.
6. Stabiliser, Zoom and Flash • If you assign [Ex. Tele Conv.] to [Fn Button Set] (P54) in the [Custom] menu, you can display the Extra Tele Conversion setting screen for both pictures and motion pictures by pressing the assigned function button. While this screen is displayed, you can change the [Picture Size] setting by pressing [DISP.].
6. Stabiliser, Zoom and Flash Changing the settings for a power zoom lens Applicable modes: Sets the screen display and lens operations when using an interchangeable lens that is compatible with power zoom (electrically operated zoom)¢. • This may only be selected when using a lens that is compatible with power zoom (electrically operated zoom). ¢ H-PS14042 MENU > [Custom] > [Power Zoom Lens] [Disp Focal Length] When you zoom, the focal distance is displayed and you can confirm the zoom position.
6. Stabiliser, Zoom and Flash Zooming using touch operations (Touch zoom) (Optical Zoom and Extra Tele Conversion for still picture recording are operable) • If you are using an interchangeable lens not supporting power zoom (H-FS12032/H-FS35100), you can only operate Extra Tele Conversion for pictures by setting [Ex. Tele Conv.] (P153) to [ZOOM]. 1 2 Touch [ ]. Touch [ ]. • The slide bar is displayed. AE 3 Perform zoom operations by dragging the slide bar.
6. Stabiliser, Zoom and Flash Taking pictures by using the flash Applicable modes: ∫ Open/Close the built-in flash Taking a picture using the flash becomes possible by opening the built-in flash. A To open the flash Slide the flash open lever. B To close the flash Press the flash until it clicks. • Forcibly closing the flash can damage the camera. • Be sure to close the built-in flash when not in use. • The flash setting is fixed to [Œ] while the flash is closed.
6. Stabiliser, Zoom and Flash Using the flash skilfully • When taking pictures with flash with the lens hood attached, the lower portion of the photo may turn dark and the control of the flash may be disabled because the photo flash may be obscured by the lens hood. We recommend detaching the lens hood. ∫ The available flash range (approximation) When you use certain lenses, light from the flash may be blocked or fail to cover the lens field of view, causing dark areas to appear in the resulting pictures.
6. Stabiliser, Zoom and Flash Changing Flash Mode Applicable modes: Set the flash to match the recording. Select the menu. (P50) MENU ‰ > [Rec] > [Flash] > [Flash Mode] ([Forced Flash On]) ([Forced On/ Red-Eye]) ([Slow Sync.]) ([Slow Sync./ Red-Eye]) The flash is activated every time regardless of the recording conditions. • Use this when your subject is back-lit or under fluorescent light.
6. Stabiliser, Zoom and Flash ∫ Available flash settings by Recording Mode The available flash settings depend on the Recording Mode.
6. Stabiliser, Zoom and Flash ∫ Shutter speed for each flash setting Flash setting Shutter speed (Sec.) ‰ Flash setting 1/50th¢ Shutter speed (Sec.) 1 to 1/16000th ¢ In Shutter Priority AE Mode, the shutter speed can be set to a value between 60 seconds and 1/50th of a second; in Manual Exposure Mode, it can be set to T (Time) or a value between 60 seconds and 1/50th of a second. • When the flash is activated the fastest shutter speed that can be selected is 1/50th of a second.
6. Stabiliser, Zoom and Flash Adjust the flash output Applicable modes: Adjust the flash brightness when pictures taken with the flash are over or underexposed. 1 Select the menu. (P50) MENU 2 > [Rec] > [Flash] > [Flash Adjust.] Press 2/1 to set the flash output and then press [MENU/SET]. • You can adjust from [j2 EV] to [i2 EV] in steps of 1/3 EV. • Select [n0] to return to the original flash output. • [i] or [j] is displayed on the flash icon in the screen when the flash level is adjusted.
7. Recording Motion Pictures Recording Motion Picture/4K Motion Picture Applicable modes: This camera can record full high definition motion pictures compatible with the AVCHD format or motion pictures recorded in MP4. In addition, the camera can record 4K motion pictures in MP4. (P166) Audio will be recorded in stereo. 1 Start recording by pressing the motion picture button. A Elapsed recording time B Available recording time • Recording of motion picture appropriate for each mode is possible.
7. Recording Motion Pictures • The operational sound of the zoom or button operation may be recorded when it is operated during the recording of a motion picture. • When using the interchangeable lens (H-PS14042), if you take your finger off the zoom lever, focus lever during recording of a motion picture, the sound of the lever returning may be recorded. When returning the lever to its starting position, do so quietly.
7. Recording Motion Pictures Setting the format, size and recording frame rate 1 Select the menu. (P50) MENU > [Motion Picture] > [Rec Format] This data format is suitable for when playing back on a high-definition TV, etc. [AVCHD] [MP4] 2 This data format is suitable for when playing back on a PC, etc. Press 3/4 to select [Rec Quality] and then press [MENU/SET].
7. Recording Motion Pictures • The higher the “Bit rate” value is, the higher the picture quality becomes. Since the camera employs the “VBR” recording method, the bit rate is changed automatically depending on the subject to record. As a result, the recording time is shortened when a fast-moving subject is recorded. • When [Miniature Effect] is selected for Creative Control Mode, you cannot select the items used for 4K motion pictures.
7. Recording Motion Pictures How to set focus when recording a motion picture ([Continuous AF]) Applicable modes: Focusing changes depending on the Focus Mode setting (P100) and the [Continuous AF] setting in the [Motion Picture] menu. Focus mode [AFS]/[AFF]/ [AFC] [MF] [Continuous AF] Description of settings [ON] The camera automatically keeps focusing on subjects during recording. [OFF] The camera maintains the focus position at the start of recording. [ON]/[OFF] You can focus manually.
7. Recording Motion Pictures Recording still pictures while recording motion pictures Applicable modes: You can record still pictures while recording a motion picture. (Simultaneous recording) During motion picture recording, press the shutter button fully to record a still picture. • Simultaneous recording indicator is displayed while recording still pictures. • Recording with the Touch Shutter function (P47) is also available.
7. Recording Motion Pictures • The picture aspect ratio will be fixed to [16:9]. Not available in these cases: • This function is not available in the following cases: – When [Rec Quality] is set to [4K/100M/30p], [4K/100M/25p] or [4K/100M/24p] for MP4 motion picture or [FHD/24M/24p] for AVCHD motion pictures (only when [ ] ([Photo Priority]) is selected) – When the drive mode is set to 4K Photo (only when [ ] ([Photo Priority]) is set) – When using [Ex. Tele Conv.
7. Recording Motion Pictures Recording Snap Movies Applicable modes: You can specify the recording time in advance and record motion pictures casually like you take snapshots. The function also allows you to shift a focus at the start of recording and add fade in/out effects in advance. • Motion pictures will be recorded with [FHD/20M/25p] in [MP4]. • Using the smartphone/tablet app “Panasonic Image App”, you can combine motion pictures recorded with the camera.
7. Recording Motion Pictures ∫ Changing the Snap Movie settings Select the menu. (P50) MENU > [Record time] [Pull Focus] [Fade] [Motion Picture] > [Snap Movie] > [SET] Sets the recording time of motion pictures. Allows dramatic imaging expression by shifting focus gradually at the start of recording. (P173) Adds a fade-in (gradual appearance) effect to an image and audio as recording starts or adds a fade-out (gradual disappearance) effect to them as recording ends.
7. Recording Motion Pictures Setting up [Pull Focus] Set the frames that specify the positions where the [Pull Focus] starts (first position) and stops (second position). Button operation 1 2 3 Press 2. Press 3/4/2/1 to move the AF area frame, and press [MENU/SET]. (First position) • If you press [DISP.] before pressing [MENU/SET], the frame will return to the centre. Repeat step 2. (Second position) • If you press [MENU/SET], the frame settings will be cancelled.
8. Playing Back and Editing Images Playing Back Pictures 1 Press [(]. 2 Press 2/1. 2: Play back the previous picture 1: Play back the next picture 1/98 • If you press and hold 2/1, you can play back the pictures in succession. • It is also possible to forward or rewind the image by dragging the screen horizontally (P46). • You can forward or rewind pictures continuously by keeping your finger on the left or right sides of the screen after forwarding/rewinding a picture.
8. Playing Back and Editing Images Playing Back Motion Pictures This unit was designed to play motion pictures using the AVCHD and MP4 formats. • Motion pictures are displayed with the motion picture icon ([ ]). Press 3 to play back. 12s A Motion picture recording time • After playback starts, the elapsed playback time is displayed on the screen. For example, 8 minutes and 30 seconds is displayed as [8m30s]. • Some information (recording information, etc.
8. Playing Back and Editing Images Creating Still Pictures from a Motion Picture You can save a scene of a motion picture as a picture. 1 Press 3 to pause motion picture playback. • You can finely adjust the location for division by pressing 2/1 while the motion picture is paused. 2 Press [MENU/SET]. • The same operation can be performed by touching [ ]. • Still pictures will be saved with [Aspect Ratio] set to [16:9] and [Quality] set to [›].
8. Playing Back and Editing Images Switching the Playback Method Using the Playback Zoom Rotate the control dial to the right. 1k 2k 4k 8k 2.0X 16k • If the control dial is rotated to the left after the image is enlarged, the magnification will be reduced. • You can also enlarge/reduce the image by pinching out/pinching in (P46) on the part you want to enlarge/reduce. • You can move the enlarged part by pressing 3/4/2/1 or dragging the screen.
8. Playing Back and Editing Images Displaying Pictures by Recording Date (Calendar Playback) 1 Rotate the control dial to the left to display the calendar screen. 2 Press 3/4/2/1 to select the recording date and press [MENU/SET]. • Only the images recorded on that date will be displayed. • Rotate the control dial left to return to the Calendar screen display. 3 Press 3/4/2/1 to select a picture and then press [MENU/SET].
8. Playing Back and Editing Images Playing Back Group Pictures A picture group consists of multiple pictures. You can play back pictures in a group either continuously or one by one. • You can edit or delete all pictures in a group at once. (For example, if you delete a picture group, all pictures in the group are deleted.) [ ]: A picture group saved at once with [4K PHOTO Bulk Saving] (P231) [ ]: A picture group consisting of pictures taken in a Time Lapse Shot.
8. Playing Back and Editing Images Playing back group pictures one by one 1 Press 4. • The same operation can be performed by touching [ [ ], or [ ]. 2 ], 1/98 SLF Press 2/1 to flip through images. • Pressing 4 again or touching [ ] will return you to the normal playback screen. • Each picture in a group can be treated same as normal pictures when they are played back.
8. Playing Back and Editing Images Deleting Pictures Once deleted, pictures cannot be recovered. To delete a single picture 1 In Playback Mode, select the picture to delete and then press [ ]. • The same operation can be performed by touching [ ]. 2 Press 3 to select [Delete Single] and then press [MENU/SET]. To delete multiple pictures or all the pictures 1 2 3 In Playback Mode, press [ ]. Press 3/4 to select the picture deletion method, and then press [MENU/SET].
9. Using Menu Functions Menu list [Rec] [Setup] P182 P213 [Motion Picture] P202 [Custom] P204 [Playback] P221 • [Photo Style], [Filter Settings], [Focus Mode], [Metering Mode], [i.Dynamic], [i.Resolution], [Diffraction Compensation], [Digital Zoom] and [Stabilizer] are common to both the [Rec] menu and [Motion Picture] menu. Changing these settings in one of these menus is reflected in other menu.
9. Using Menu Functions [Photo Style] Applicable modes: You can select effects to match the type of image you wish to record. It is possible to adjust the items such as colour or picture quality of the effect to your desire. MENU > [Rec] > [Photo Style] [Standard] This is the standard setting. [Vivid]¢ Brilliant effect with high saturation and contrast. [Natural]¢ Soft effect with low contrast. [Monochrome] Monochrome effect with no colour shades. [L.
9. Using Menu Functions ∫ Adjusting the picture quality 6WDQGDUG • Picture quality cannot be adjusted in the Intelligent Auto Plus Mode. 1 2 -5 ±0 DISP.カスタム登録 [s] Decreases the difference between the brightness and the darkness in the picture. [r] The picture is sharply defined. [s] The picture is softly focused. [r] The noise reduction effect is enhanced. Picture resolution may deteriorate slightly. [s] The noise reduction effect is reduced. You can obtain pictures with higher resolution.
9. Using Menu Functions ∫ Registering settings to [Custom] Adjust the picture quality following step 2 of “Adjusting the picture quality”, and then press [DISP.]. [Filter Settings] Applicable modes: You can apply image effects (filters) that are available for Creative Control Mode to images in other modes, such as Aperture-Priority AE Mode or Panorama Shot Mode.
9. Using Menu Functions ∫ Taking a picture with and without an image effect simultaneously ([Simultaneous record w/o filter]) You can press the shutter button once and take two pictures simultaneously, one with an image effect and the other one without it. MENU > [Rec] > [Filter Settings] > [Simultaneous record w/o filter] Settings: [ON]/[OFF] • A picture with an image effect will be taken first, followed by a picture without it. • Only an image with an image effect is displayed for Auto Review.
9. Using Menu Functions [Aspect Ratio] Applicable modes: This allows you to select the aspect ratio of the pictures to suit printing or the playback method. MENU > [Rec] > [Aspect Ratio] [4:3] [Aspect Ratio] of a 4:3 TV [3:2] [Aspect Ratio] of a 35 mm film camera [16:9] [Aspect Ratio] of a high-definition TV, etc. [1:1] Square aspect ratio [Picture Size] Applicable modes: Set the number of pixels.
9. Using Menu Functions [Quality] Applicable modes: Set the compression rate at which the pictures are to be stored. > MENU [Rec] > [Quality] Settings File format [A] A JPEG image in which image quality was given priority. JPEG [›] [ ] [ ] [ Description of settings ] RAWiJPEG RAW A standard image quality JPEG image. This is useful for increasing the number of shots without changing the number of pixels. You can record a RAW image and a JPEG image ([A] or [›]) simultaneously.
9. Using Menu Functions [Metering Mode] Applicable modes: Type of optical measurement to measure brightness can be changed. MENU > [Rec] > [Metering Mode] [ ] (Multiple) This is the method in which the camera measures the most suitable exposure by judging the allocation of brightness on the whole screen automatically. Usually, we recommend using this method. [ ] (Centre weighted) This is the method used to focus on the subject on the centre of the screen and measure the whole screen evenly.
9. Using Menu Functions [i.Dynamic] Applicable modes: Contrast and exposure are compensated when the brightness difference between the background and subject is great, etc. MENU > [Rec] > [i.Dynamic] Settings: [AUTO]/[HIGH]/[STANDARD]/[LOW]/[OFF] Not available in these cases: • Compensation effect may not be achieved depending on the recording conditions. • This function is not available in the following cases: – When [HDR] is set to [ON] [i.
9. Using Menu Functions [HDR] Applicable modes: You can combine 3 pictures with different levels of exposure into a single picture with rich gradation. You can minimise the loss of gradations in bright areas and dark areas when, for example, the contrast between the background and the subject is large. An image combined by HDR is recorded in JPEG.
9. Using Menu Functions [Multi Exp.] Applicable modes: Gives an effect like multi exposure. (up to 4 times equivalent per a single image) MENU 1 2 > [Rec] > [Multi Exp.] Press 3/4 to select [Start] and then press [MENU/SET]. Decide on the composition, and take the first picture. • After taking the picture, press the shutter button halfway down to take the next picture. • Press 3/4 to select the item and then press [MENU/SET] for one of the following operations.
9. Using Menu Functions [Shutter Type] Applicable modes: Select the shutter to be used for taking pictures. MENU > [AUTO] [EFC] [ESHTR] [Rec] > [Shutter Type] The shutter mode automatically switches based on the recording conditions and shutter speed. Takes pictures in Electronic Front Curtain Mode. Takes pictures in Electronic Shutter Mode. Electronic Front Curtain Electronic Shutter Flash ± — Shutter Speed (Sec.
9. Using Menu Functions [Red-Eye Removal] Applicable modes: When Red-Eye Reduction ([ ], [ ]) is selected, Red-Eye Removal is performed whenever the flash is used. The camera automatically detects red-eye and corrects the picture. MENU > [Rec] > [Red-Eye Removal] Settings: [ON]/[OFF] • [ ] is displayed on the icon when it is set to [ON]. • Under certain circumstances, red-eye cannot be corrected.
9. Using Menu Functions [ISO Increments] Applicable modes: You can adjust the ISO sensitivity settings for every 1/3 EV. MENU > [Rec] > [ISO Increments] Settings: [1/3 EV]/[1 EV] [Extended ISO] Applicable modes: ISO sensitivity can be set up to minimum [ISO100].
9. Using Menu Functions [Long Shtr NR] Applicable modes: The camera automatically removes noise that appears when the shutter speed becomes slower to take pictures of night scenery etc. so you can take beautiful pictures. MENU > [Rec] > [Long Shtr NR] Settings: [ON]/[OFF] • [Long shutter noise reduction ongoing] is displayed for the same time as the shutter speed for signal processing.
9. Using Menu Functions [Diffraction Compensation] Applicable modes: The camera raises the resolution by correcting the blurriness caused by diffraction when the aperture is closed. MENU > [Rec] > [Diffraction Compensation] Settings: [AUTO]/[OFF] • Compensation effect may not be achieved depending on the recording conditions. • Noise may stand out with higher ISO sensitivity.
9. Using Menu Functions [Face Recog.] Applicable modes: Face Recognition is a function which finds a face resembling a registered face and priorities focus and exposure automatically. Even if the person is located towards the back or on the end of a line in a group photo, the camera can still take a clear picture. KEN MENU > KEN [Rec] > [Face Recog.] Settings: [ON]/[OFF]/[MEMORY] • The following functions will also work with the Face Recognition function.
9. Using Menu Functions ∫ Face Settings You can register information such as names and birthdays for face images of up to 6 people. Point of recording when registering the face images • Face front with eyes open and mouth closed, making sure the outline of the face, the eyes, or the eyebrows are not covered with hair when registering. • Make sure there is no extreme shading on the face when registering. (Flash will not flash during registration.
9. Using Menu Functions 4 Set the item. • You can register up to 3 face images. [Name] It is possible to register names. • For information on how to enter characters, refer to P57. [Age] It is possible to register the birthday. (Add Images) To add additional face images. [Add Images] 1 Select the unregistered face recognition frame, and then press [MENU/SET]. 2 Perform step 3 in “Face Settings”. (Delete) To delete one of the face images.
9. Using Menu Functions [Profile Setup] Applicable modes: If you set the name and birthday of your baby or pet in advance, you can record their name and age in months and years in the images. You can display these at playback or stamp the recorded images using [Text Stamp] (P236). JOE MENU > Settings: [ LUCKY [Rec] > [Profile Setup] ] ([Baby1])/[ ] ([Baby2])/[ ] ([Pet])/[OFF]/[SET] ∫ Setting [Age] or [Name] 1 Press 3/4 to select [SET] and then press [MENU/SET].
9. Using Menu Functions [Motion Picture] menu : • [Photo Style] (P183) • [Filter Settings] (P185) • [Snap Movie] (P171) • [Rec Format] (P166) • [Rec Quality] (P166) • [Focus Mode] (P100) • [Picture Mode] (P169) • [Continuous AF] (P168) • [Metering Mode] (P189) • [i.Dynamic] (Intelligent dynamic range control) (P190) • [i.Resolution] (P190) • [Diffraction Compensation] (P197) • [Ex. Tele Conv.] (P153) • [Digital Zoom] (P155) • [Stabilizer] (P150) • [Flkr Decrease] (P202) • [Mic Level Disp.
9. Using Menu Functions [Wind Noise Canceller] Applicable modes: This will reduce the wind noise coming into the built-in microphone while maintaining sound quality. MENU > [Motion Picture] > [Wind Noise Canceller] Settings: [HIGH]/[STANDARD]/[OFF] • [HIGH] effectively reduces the wind noise by minimising the low-pitched sound when a strong wind is detected. • [STANDARD] extracts and reduces only the wind noise without deteriorating the sound quality.
9. Using Menu Functions : MENU [Custom] menu > [Custom] Disables operational sounds and output of light at once. • Audio from the speaker will be muted and the flash and the AF Assist lamp will be disabled. The following settings are fixed. – [Shutter Type]: [ESHTR] – [Flash Mode]: [Œ] (forced flash off) – [AF Assist Lamp]: [OFF] – [Beep Volume]: [s] (OFF) – [Shutter Vol.]: [ ] (OFF) [Silent Mode] • Even when [ON] is set, the following functions light up/ flash.
9. Using Menu Functions MENU > [Custom] Speeds up the focusing that takes place when you press the shutter button. [Quick AF] • The battery will be consumed faster than usual. • This function is not available in the following cases: – In Preview Mode – In low light situations s [Pinpoint AF Time] Sets the time for which the screen is enlarged when the shutter button is pressed halfway with Auto Focus Mode set to [ ].
9. Using Menu Functions MENU > [Custom] • The AF Assist Lamp may be greatly blocked, and it may become harder to focus when a lens with large diameter is used. • The setting is fixed to [OFF] in the following cases.
9. Using Menu Functions MENU > [Custom] [MF Assist Display] [MF Guide] Sets whether MF Assist (enlarged screen) will appear in a windowed screen display or in a full screen display. When you set the focus manually, an MF guide that allows you to check the direction to achieve focus is displayed. s s A Indicator for ¶ (infinity) In-focus portions (portions on the screen with clear outlines) are highlighted when focus is being adjusted manually.
9. Using Menu Functions MENU > [Custom] This allows you to set either to display or not display the histogram. You can set the position by pressing 3/4/2/1. • Direct touch operation is also possible from the recording screen. [Histogram] [Guide Line] • A histogram is a graph that displays brightness along the horizontal axis (black to white) and the number of pixels at each brightness level on the vertical axis. It allows you to easily check a picture’s exposure.
9. Using Menu Functions MENU > [Custom] When the Auto Review function is activated or when playing back, white saturated areas appear blinking in black and white. [Highlight] • If there are any white saturated areas, we recommend compensating the exposure towards negative (P114) referring to the histogram (P208) and then taking the picture again. It may result in a better quality picture.
9. Using Menu Functions MENU > [Custom] [Zebra Pattern] (continued) [Monochrome Live View] • If you assign [Zebra Pattern] to [Fn Button Set] (P54) in the [Custom] menu, each time you press the function button to which the setting is assigned, the zebra pattern toggles as follows: [Zebra 1] > [Zebra 2] > [OFF]. When [Zebra 2] is set to [OFF], the setting toggles in the order of [Zebra 1] > [OFF], allowing you to switch the setting quickly. You can display the recording screen in black and white.
9. Using Menu Functions MENU > [Custom] This changes the angle of view during motion picture recording and still picture recording. [Rec Area] [Remaining Disp.] [Auto Review] • The recording area indicated is an approximation. • [Rec Area] is not available for 4K photo or [Post Focus] recording. This will switch display between the number of recordable pictures and available recording time. • [9999i] is displayed if there are 10000 or more pictures remaining.
9. Using Menu Functions MENU > [Custom] Changes the control settings for Manual Focus that are enabled when an interchangeable lens with no focus ring (H-FS12032) is in use. [MF Magnification Level]: [Lens w/o Focus Ring] An initial MF Assist magnification level between 3 and 10 times can be set. • When [MF Assist Display] is set to [PIP], the display can be enlarged only up to 6 times regardless of this setting.
9. Using Menu Functions : MENU [Setup] menu > [Setup] [Online Manual] [URL display]/[QR Code display] [Clock Set] Setting Date/Time. s P36 Sets the times for the region where you live and your holiday destination. • [Destination] can be set after setting up [Home]. After selecting [Destination] or [Home], press 2/1 to select an area, and press [MENU/SET] to set.
9. Using Menu Functions MENU > [Travel Date] (continued) [Wi-Fi] [Beep] [Setup] • You can display the elapsed days and travel destination during playback or stamp them on recorded pictures in [Text Stamp] (P236). • The number of days that have passed since the departure date can be printed out using the software “PHOTOfunSTUDIO” (P290). • The travel date is calculated using the date in the clock setting and the departure date you set.
9. Using Menu Functions MENU > [Setup] Brightness, colour, or red or blue tint of the Monitor is adjusted. 1 [Monitor Display] 2 Select the settings by pressing 3/4, and adjust with 2/1. • Adjusting can also be performed by rotating the control dial. s Press [MENU/SET] to set. • Some subjects may appear differently from actuality on the monitor. However, this does not affect the recorded pictures. „ [AUTO]: The brightness is adjusted automatically depending on how bright it is around the camera.
9. Using Menu Functions MENU > [Setup] [Sleep Mode]: The camera is automatically turned off if the camera has not been used for the time selected on the setting. [Sleep Mode(Wi-Fi)]: The camera is automatically turned off if it is not connected to a Wi-Fi network and has not been used for 15 minutes (approx.). [Auto Monitor Off]: The monitor is automatically turned off if the camera has not been used for the time selected on the setting.
9. Using Menu Functions MENU > [Setup] [HDMI Mode (Play)]: Sets the image output format. [TV Connection] [AUTO]: The output resolution is automatically set based on the information from the connected TV. [4K]: The progressive method with 2160 available scan lines and an output resolution of 3840k2160 are used for output. [1080p]: The progressive method with 1080 available scan lines is used for output. [1080i]: The interlace method with 1080 available scan lines is used for output.
9. Using Menu Functions MENU > [Setup] [3D Playback]: Set the output method for 3D pictures. [ ]: Set when connecting to a 3D compatible television. [TV Connection] (continued) [ ]: Set when connecting to a television not compatible with 3D. Set this when you would like to view pictures in 2D (conventional image) on a 3D compatible television.
9. Using Menu Functions MENU > [Setup] Reset the file number of the next recording to 0001. [No.Reset] • The folder number is updated and the file number starts from 0001. • A folder number between 100 and 999 can be assigned. The folder number should be reset before it reaches 999. We recommend formatting the card (P29) after saving the data on a PC or elsewhere. • To reset the folder number to 100, format the card first and then use this function to reset the file number.
9. Using Menu Functions MENU > [Setup] It will perform optimisation of imaging device and image processing. [Pixel Refresh] • Imaging device and image processing is optimised when the camera is purchased. Use this function when bright spots that do not exist in the subject get recorded. • Turn the camera off and on after the pixels are corrected. s Dust reduction to blow off the debris and dust that have affixed to the front of the imaging device is performed.
9. Using Menu Functions : [Playback] menu • [2D/3D Settings] (P222) • [Slide Show] (P223) • [Playback Mode] (P224) • [Location Logging] (P225) • [Beauty Retouch] (P226) • [RAW Processing] (P229) • [4K PHOTO Bulk Saving] (P231) • [Light Composition] (P232) • [Clear Retouch] (P234) • [Title Edit] (P235) • [Text Stamp] (P236) • [Video Divide] (P237) • [Time Lapse Video] (P238) • [Stop Motion Video] (P238) • [Resize] (P239) • [Cropping] (P240) • [Rotate] (P241) • [Rotate Disp.
9. Using Menu Functions ∫ How to select an image(s) after selecting [Single] or [Multi] • When [Single] and [Multi] are not available, select an image in the same way as when [Single] is selected. [Single] setting 1 Press 2/1 to select the picture. 2 Press [MENU/SET]. • If [Set/Cancel] is displayed at the right bottom of the screen, the setting is cancelled when [MENU/SET] is pressed again.
9. Using Menu Functions [Slide Show] You can play back the pictures you have taken in synchronisation with music, and you can do this in sequence while leaving a fixed interval between each of the pictures. You can also put together a slide show composed of only still pictures, only motion pictures, etc. We recommend this feature when you view your pictures by connecting the camera to a TV. MENU 1 2 > [Playback] > [Slide Show] Select the group to play back by pressing 3/4, and then press [MENU/SET].
9. Using Menu Functions ∫ Changing the slide show settings You can change the settings for slide show playback by selecting [Effect] or [Setup] on the slide show menu screen. This allows you to select the screen effects when switching from one picture to the next. [Effect] [Duration] • [Duration] can be set only when [OFF] has been selected as the [Effect] setting.
9. Using Menu Functions [Location Logging] You can write location information sent from a smartphone (latitude and longitude) on images. • You can send location information and write it on images using a smartphone. (P255) • You need to install “Panasonic Image App” on your smartphone. (P248) • Read the [Help] in the “Image App” menu for further details on how to operate. Preparation: Sending location information to the camera from the smartphone.
9. Using Menu Functions [Beauty Retouch] Apply aesthetic and makeup effects to faces in your pictures. MENU 1 2 > [Playback] > [Beauty Retouch] Press 2/1 to select a picture, and then press [MENU/ SET]. Press 2/1 to select the face of the person to edit, and then press [MENU/SET]. • Only a person with an arrow can be selected. • If only one person is detected, press [MENU/SET]. 3 Press 3/4/2/1 to select an item and effect.
9. Using Menu Functions A (Items) [Aesthetic Retouch] B (Sub-items) ] ([Clear Skin]) [ ] ([Shine Removal]) Shiny areas of the skin are matted down. [ ] ([Whitening]) Eyes and teeth are whitened and beautified. [ ] ([Lift Up]) Face lines are sharpened. [ ] ([Eye Emphasis]) Eyes look bigger and defined. — 5 Adjusts foundation colour. [ ] ([Lip Color]) Colour of the lips is adjusted to highlight the texture. [ ] ([Cheek Color]) Emphasises structure of face through selection of colour.
9. Using Menu Functions • You cannot retouch two or more people at once. Save the picture once and then select the next person. • The brightness or colour between a picture viewed before saving and the saved picture may be different. • If the subject is wearing glasses or the face cannot be detected properly, you may not be able to retouch the face as desired. • When a picture is bright due to reflected light from a flash or the sun, the retouching effect may be less pronounced.
9. Using Menu Functions [RAW Processing] You can process the pictures taken in RAW format. The processed pictures will be saved in JPEG format. MENU 1 2 > [Playback] > [RAW Processing] Select RAW images with 2/1, and then press [MENU/ SET]. Press 3/4 to select an item. • You can set the following items. The settings you used for the recording are selected when you start setting these items. [White Balance] Allows you to select a White Balance preset and adjust it.
9. Using Menu Functions 3 4 5 Press [MENU/SET] and set. • Refer to “How to set each item” on P230. Press [MENU/SET]. • This operation returns you to the screen in step through 4. 2. To set other items, repeat steps 2 Select [Begin Processing] with 3/4, and then press [MENU/SET]. ∫ How to set each item When you select an item, the setting screen will be displayed. Button operation 2/1 Touch operation Description of operation Dragging Selects a setting. DISP.
9. Using Menu Functions [Setup] setting When you select an item, the screen that asks you to select [Reinstate Adjustments], [Color Space], or [Picture Size] will be displayed. 1 Press 3/4 to select an item, and press [MENU/SET]. • If you select [Reinstate Adjustments], a confirmation screen will be displayed. Selecting [Yes] will execute the operation and return you to the item selection screen. 2 Press 3/4 to select a setting, and press [MENU/SET].
9. Using Menu Functions [Light Composition] Select multiple frames from 4K burst files that you wish to combine. Parts of the image that are brighter than the preceding frame will be superimposed on the preceding frame to combine the frames into one picture. MENU 1 2 > [Playback] > [Light Composition] Press 2/1 to select the 4K photo burst files and press [MENU/SET]. Choose the combining method, and then press [MENU/SET].
9. Using Menu Functions [Range Merging] setting Select the first and last frames to superimpose the brighter parts of the frames between them. 1 Select the frame of the first picture, and press [MENU/SET]. The selection method is the same as in step 1 of [Composite Merging] setting. 2 Select the frame of the last picture, and press [MENU/SET]. 3 Select [Yes] at the confirmation screen, and then press [MENU/SET]. The combined picture is displayed. • Pictures are saved in JPEG format.
9. Using Menu Functions [Clear Retouch] • The erasure operation can only be performed by touching. [Clear Retouch] automatically enables the touch operation. [Playback] > MENU > [Clear Retouch] 1 2 Press 2/1 to select a picture, and then press [MENU/SET]. Drag your finger over the part you want to delete. • The parts to be erased are coloured. • Touching [Undo] will return the coloured part back to its previous state. 5(029( 6&$/,1* 8QGR 6HW Erasing details (enlarging the display) 1 Touch [SCALING].
9. Using Menu Functions [Title Edit] You can add text (comments) to pictures. After text has been registered, it can be stamped in prints using [Text Stamp] (P236). MENU 1 2 > [Playback] > [Title Edit] Select the picture. (P222) • [’] is displayed for pictures with titles already registered. Enter the text. (P57) • To delete the title, erase all the text in the text input screen. • You can print out texts (comments) using the software “PHOTOfunSTUDIO” (P290).
9. Using Menu Functions [Text Stamp] You can stamp recording information on recorded images. LISA MENU 1 2 3 4 > [Playback] > [Text Stamp] Select the picture. (P222) • [‘] appears on screen if the picture is stamped with text. Press 3/4 to select [Set], and then press [MENU/SET]. [Shooting Date] Stamps the recording date. [Name] [ ] ([Face Recognition]): Name registered in [Face Recog.] will be stamped. [ ] ([Baby/Pet]): Name registered in [Profile Setup] will be stamped.
9. Using Menu Functions [Video Divide] Recorded motion picture can be divided in two. It is recommended for when you want to divide a part you need with a part you do not need. Dividing a motion picture is permanent. Decide before you divide! MENU 1 2 3 > [Playback] > [Video Divide] Press 2/1 to select the motion picture to divide, and then press [MENU/SET]. Press 3 at the location to divide. • You can finely adjust the location for division by pressing 2/1 while the motion picture is paused.
9. Using Menu Functions [Time Lapse Video] This function allows you to create a motion picture from a picture group recorded with [Time Lapse Shot]. The created motion picture is saved in MP4 recording format. MENU 1 2 > [Playback] > [Time Lapse Video] Select the [Time Lapse Shot] picture group with 2/1, and then press [MENU/ SET]. Create a motion picture by selecting the methods for creating it. • Refer to step 4 onwards on P145 for details. Also refer to the notes on P146 for created motion pictures.
9. Using Menu Functions [Resize] To allow easy posting to web pages, attachment to e-mail etc., picture size (number of pixels) is reduced. MENU > [Playback] > [Resize] Select the picture and size. [Single] setting 1 Press 2/1 to select the picture, and then press [MENU/SET]. 2 Press 3/4 to select the size, and then press [MENU/SET]. 4:3 4:3 4:3 L 16 M 8 S 4 6HW [Multi] setting 1 Press 3/4 to select the size, and then press [MENU/SET].
9. Using Menu Functions [Cropping] You can enlarge and then clip the important part of the recorded picture. MENU 1 2 > [Playback] > [Cropping] Press 2/1 to select the picture, and then press [MENU/SET]. Use the control dial and press 3/4/2/1 to select the parts to be cropped. Control dial (right): Enlargement Control dial (left): Reduction 3/4/2/1: Move • You can also touch [ 3 ]/[ ] to enlarge/reduce. • You can also move by dragging on the screen. Press [MENU/SET].
9. Using Menu Functions [Rotate] (The picture is rotated manually.) Rotate pictures manually in 90o steps. • The [Rotate] function is disabled when [Rotate Disp.] is set to [OFF]. MENU 1 2 > [Playback] > [Rotate] Press 2/1 to select the picture and then press [MENU/SET]. Select the rotation direction. : The picture rotates clockwise in steps of 90o. : The picture rotates counter-clockwise in steps of 90o. [Rotate Disp.] (The picture is automatically rotated and displayed.
9. Using Menu Functions [Favorite] You can do the following if a mark has been added to pictures and they have been set as favourites. • Delete all the pictures not set as favourites. ([All Delete Except Favorite]) MENU > [Playback] > [Favorite] Select the picture. (P222) ∫ Cancelling all the [Favorite] settings Press 3/4 to select [Cancel], and then press [MENU/SET]. • In [Playback Mode], the [Cancel] is disabled. • You can set up to 999 pictures as favourites.
9. Using Menu Functions [Print Set] DPOF “Digital Print Order Format” is a system that allows the user to select which pictures to print, how many copies of each picture to print and whether or not to print the recording date on the pictures when using a DPOF compatible photo printer or photo printing store. For details, ask at your photo printing store. • When you set [Print Set] for a group pictures, the print setting for the number of prints will be applied to every picture in the group.
9. Using Menu Functions [Protect] You can set protection for pictures you do not want to delete by mistake. MENU > [Playback] > [Protect] Select the picture. (P222) ∫ Cancelling all the [Protect] settings Press 3/4 to select [Cancel], and then press [MENU/SET]. • The [Protect] feature is only designed to work with this camera. • Even if you protect pictures on a card, they will be deleted if the card is formatted.
10.
10. Using the Wi-Fi function Wi-Fi function ∫ Before Use • Set the date and time settings in advance. (P36) • To use the Wi-Fi function on this unit, a wireless access point or a destination device equipped with the wireless LAN function is required.
10. Using the Wi-Fi function After connecting to a Wi-Fi network, you can perform the following operations by pressing [Wi-Fi]: [Terminate the Connection] [Change the Destination] ¢1 [Change Settings for Sending Images]¢2 Terminates the Wi-Fi connection. Terminates the Wi-Fi connection, and allows you to select a different Wi-Fi connection. Refer to P262 for details.
10. Using the Wi-Fi function Controlling with a Smartphone/Tablet With a smartphone, you can record images remotely, play back images on the camera or save them to the smartphone. • You need to install “Panasonic Image App” (referred to as “Image App” from this point on) on your smartphone. Installing the smartphone/tablet app “Image App” The “Image App” is an application provided by Panasonic. • OS App for AndroidTM: Android 4.4 or higher App for iOS: iOS 9.
10. Using the Wi-Fi function Connecting to a smartphone/tablet Connecting without using the password You can easily set up a direct connection to your smartphone without entering a password. On the camera Select the menu. (P50) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] > [Remote Shooting & View] A SSID • When the camera is ready to be connected to the smartphone, the SSID is displayed. • You can also display the information by pressing [Wi-Fi] on the camera.
10. Using the Wi-Fi function Using a password to set up a connection Connecting with a password further enhances security. You can scan a QR code or manually enter a password to set up a connection. Preparations: (On the camera) Set the [Wi-Fi Password] to [ON]. (P282) ∫ Using the QR code to set up a connection On the camera Select the menu.
10. Using the Wi-Fi function ∫ Manually entering a password to set up a connection On the camera Select the menu. (P50) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] > [Remote Shooting & View] A SSID and password B QR code • When the camera is ready to be connected to the smartphone, the QR code, SSID and password are displayed. • You can also display the information by pressing [Wi-Fi] on the camera. On your smartphone 1 2 Turn on the Wi-Fi function in the setting menu.
10. Using the Wi-Fi function When connecting via a wireless access point ([Via Network]): On the camera 1 Select [Via Network]. • Follow the connection procedure described on P277 to connect the camera to a wireless access point. On your smartphone 2 3 4 Turn on the Wi-Fi function. Connect the smartphone to the wireless access point to which the camera is connected. Start “Image App”. (P248) When directly connecting the camera and smartphone ([Direct]): On the camera 1 Select [Direct].
10. Using the Wi-Fi function Taking images via a smartphone/tablet (remote recording) 1 2 Connect to a smartphone. (P249) Operate the smartphone. 1 Select [ ]. 2 Record an image. • The recorded images are saved in the camera. • Some settings are not available. • When recording with 4K Pre-Burst with the smartphone, terminate the connection only after switching to 4K Burst recording by pressing [ ] on the camera.
10. Using the Wi-Fi function Playing back images in the camera 1 2 Connect to a smartphone. (P249) Operate the smartphone. 1 Select [ ]. • You can switch the images to be displayed by selecting the icon (A) on the top left of the screen. To display images stored in the camera, select [LUMIX]. 2 Touch the image to enlarge it. • When you play a motion picture, the camera transmits it to the “Image App” at a reduced data size.
10. Using the Wi-Fi function Sending images in the camera to an SNS 1 2 Connect to a smartphone. (P249) Operate the smartphone. 1 Select [ ]. • You can switch the images to be displayed by selecting the icon (A) on the top left of the screen. To display images stored in the camera, select [LUMIX]. 2 Touch and hold an image, and drag it to send it to an SNS, etc. • The image is sent to a web service such as an SNS.
10. Using the Wi-Fi function ∫ Recording location information and images 1 Start recording location information with the smartphone. 1 Start “Image App”. (P248) 2 Select [ ]. 3 Select [Geotagging]. 4 Select [ ] to start recording location information. 2 3 Record images with the camera. Stop recording the location information with the smartphone. 1 Select [ ] to stop recording the location information. ∫ Writing the location information to the images (Preparation on the camera) Connect to a smartphone.
10. Using the Wi-Fi function Combining motion pictures recorded with Snap Movie according to your preference on a smartphone/tablet Using a smartphone, you can combine motion pictures recorded with the camera’s [Snap Movie] function (P171). Music can be added to motion pictures to be combined. In addition, you can save the combined motion picture or upload it on a web service. Record motion pictures with [Snap Movie]. Send the recorded motion pictures. Edit the motion pictures.
10. Using the Wi-Fi function Displaying pictures on a TV You can display pictures on a TV that supports DLNA (DMR). 1 Select the menu. (P50) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] > [Playback on TV] 2 3 4 Select [Via Network] or [Direct], and connect. (P276) Select a device you want to connect. • When the connection is established, the screen is displayed. Take or play back pictures on this unit.
10. Using the Wi-Fi function Sending images When sending images, select the method for sending them after selecting [New Connection]. After the connection has been completed, settings for sending, such as the image size for sending, can also be changed. ∫ Images that can be sent JPEG RAW MP4¢1 AVCHD¢1, 2 4K Burst File¢1 Pictures recorded in [Post Focus]¢1 3D [Smartphone] (P263) ± — ±¢3 — — — [PC] (P266) ± ± ± ± ± ± [Cloud Sync.
10. Using the Wi-Fi function Send Images While Recording A picture can be automatically sent to a specified device every time you take it. • When connected with [Send Images While Recording], [ ] is displayed on the recording screen, and [ ] is displayed while sending a file. • To terminate the connection, follow the steps below: 55 MENU > [Setup] > [Wi-Fi] > [Wi-Fi Function] > [Yes] • You can terminate the connection or change the send settings by pressing [Wi-Fi].
10. Using the Wi-Fi function Send Images Stored in the Camera Images can be selected and sent after recording. ∫ How to select an image(s) after selecting [Single Select] or [Multi Select] [Single Select] setting 1 Select the picture. 2 Select [Set]. 6HW [Multi Select] setting 1 Select the picture. (repeat) 2 • The setting is cancelled when the picture is selected again. 2. Select [OK]. • The number of pictures that can be sent by [Multi Select] is limited.
10. Using the Wi-Fi function Changing the settings for sending images Pressing [DISP.] after completing a connection allows you to change the settings for sending such as the image size for sending. [Size] Resize the image to send. [Original]/[Auto]¢1/[Change] • If you select [Auto], the image size is determined by the circumstances at the destination. • You can select the image size for [Change] from [M], [S] or [VGA]. The aspect ratio does not change.
10. Using the Wi-Fi function Sending images to a smartphone/tablet Preparations • Install the “Image App” in advance. (P248) 1 Select the menu. (P50) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] > [Send Images While Recording] or [Send Images Stored in the Camera] > [Smartphone] 2 Select [Via Network] or [Direct], and connect. (P276) On your smartphone When connecting with [Via Network]: 1 Turn on the Wi-Fi function. 2 Select the wireless access point you want to connect to, and set.
10. Using the Wi-Fi function Printing Wirelessly You can send images to a compatible printer, and print them wirelessly. Preparations To print out recorded pictures wirelessly, you must use a printer that supports PictBridge (wireless LAN)¢. ¢ Compliant with the DPS over IP standards. • For details on the PictBridge (wireless LAN-compatible) printer, contact the respective company. 1 Select the menu.
10. Using the Wi-Fi function Sending images to AV device You can send pictures and motion pictures to an AV device (home AV device) that supports DLNA, such as a recorder. A Wireless access point 1 B Home AV device Select the menu. (P50) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] > [Send Images While Recording] or [Send Images Stored in the Camera] > [AV device] 2 3 4 Select [Via Network] or [Direct], and connect. (P276) Select a device you want to connect.
10. Using the Wi-Fi function Sending images to PC You can send pictures and motion pictures recorded with this unit to a PC. Preparations (On your PC) (On the camera) • If the workgroup of the destination PC has • Turn the computer on. been changed from the standard setting, you • Prepare folders for receiving images on the also need to change the setting of this unit in PC before sending a picture to the PC. [PC Connection].
10. Using the Wi-Fi function (For Mac) Supported OS: OS X v10.5 to v10.11, macOS 10.12 to 10.14 Example: OS X v10.8 1 Select a folder you intend to use for receiving, then click on the items in the following order. [File] [Get Info] 2 Enable sharing of the folder. • For details, refer to the operating instructions of your PC or Help on the OS. Sending images to the PC 1 Select the menu.
10. Using the Wi-Fi function Using Web services You can send pictures and motion pictures to an SNS, etc. via “LUMIX CLUB”. By setting up automatic transfers of pictures and motion pictures to the Cloud Sync Service, you can receive the transferred pictures or motion pictures on a PC or smartphone. LUMIX CLUB A Wireless access point B Web service C Cloud Sync Service Preparations To send images to a web service or a cloud folder, you need to register to “LUMIX CLUB” (P272).
10. Using the Wi-Fi function Registering web services When sending images to web services, the web service being used must be registered with the “LUMIX CLUB”. (P272) • Check the “FAQ/Contact us” on the following site for compatible web services. https://lumixclub.panasonic.net/eng/c/lumix_faqs/ Preparation: Make sure that you have created an account on the web service you want to use, and have the login information available. 1 2 3 4 Connect to the “LUMIX CLUB” site using a smartphone or computer.
10. Using the Wi-Fi function ∫ Sending images in the camera to a web service with simple operations Once you send an image, you can send other images to a web service with simple, smartphone-like operations in an environment where a wireless access point connection is available. (The instructions below assume that you are already registered to “LUMIX CLUB” and the camera has a record of a connection to a wireless access point.) 1 2 Display an image. Press 4.
10. Using the Wi-Fi function When sending images to [Cloud Sync. Service] ∫ Using [Cloud Sync. Service] (As of May 2019) Preparations You need to register to “LUMIX CLUB” (P272) and configure the Cloud Sync. setting to send a picture to a Cloud Folder. For a PC, use “PHOTOfunSTUDIO” (P290) to set up Cloud Sync settings. For a smartphone, use “Image App” to set them up. • If you set the picture destination to [Cloud Sync.
10. Using the Wi-Fi function Registering to the “LUMIX CLUB” If you register this unit to the “LUMIX CLUB”, you can synchronise images between the devices you are using, or transfer these images to web services. Use the “LUMIX CLUB” when uploading pictures to web services. About the [LUMIX CLUB] Acquire a “LUMIX CLUB” login ID (free). • You can set the same “LUMIX CLUB” login ID for this unit and a smartphone. (P274) Refer to the “LUMIX CLUB” site for details. https://lumixclub.panasonic.
10. Using the Wi-Fi function 4 5 Enter a password. • Enter any combination of 8 to 16 characters and numbers for the password. • For information on how to enter characters, refer to P57. Check the login ID and select [OK]. • Be sure to make a note of the login ID and password. • The login ID (12-digit number) will be displayed automatically. When logging in to the “LUMIX CLUB” with a computer, you only need to enter the numbers. • A message is displayed when the connection is complete. Select [OK].
10. Using the Wi-Fi function To set the same login ID for the camera and the smartphone/tablet Setting the same login ID on this unit and your smartphone is convenient for sending images on this unit to other devices or web services. When either this unit or the smartphone/tablet has acquired the login ID: 1 2 Connect this unit to the smartphone. (P249) From the “Image App” menu, set the common login ID. • The login IDs for this unit and the smartphone become the same.
10. Using the Wi-Fi function Delete your login ID and account from the “LUMIX CLUB” Delete the login ID from the camera when transferring it to another party or disposing of it. You can also delete your “LUMIX CLUB” account. 1 Select the menu. (P50) MENU 2 3 4 > [Setup] > [Wi-Fi] > [Wi-Fi Setup] > [LUMIX CLUB] > [Delete account] • The message is displayed. Select [Next]. Select [Yes] in the login ID delete confirmation screen. • The message is displayed. Select [Next].
10. Using the Wi-Fi function About Connections If you have selected [New Connection], select a Wi-Fi function and destination first, and then select a connection method. If you have selected [Select a destination from History] or [Select a destination from Favorite], you can connect with the same Wi-Fi connection settings as used previously. This section describes connection methods. • When connecting with the same settings as used previously, refer to P280.
10. Using the Wi-Fi function Connecting via a wireless access point (via the network) You can select the method for connecting to a wireless access point. ¢ WPS refers to a function that allows you to easily configure the settings related to the connection and security of wireless LAN devices. To check if the wireless access point you are using is compatible with WPS, refer to the manual of the wireless access point.
10. Using the Wi-Fi function If you are not sure about the WPS compatibility (connecting by [From List]) Search for available wireless access points. • Confirm encryption key of the selected wireless access point if the network authentication is encrypted. • When connecting by [Manual Input], confirm SSID, encryption type, encryption key of the wireless access point you are using. 1 2 Select the wireless access point you are connecting to. • Pressing [DISP.
10. Using the Wi-Fi function • Check the wireless access points instruction manual and settings when saving a wireless access point. • If no connection can be established, the wireless access point’s radio waves may be too weak. Refer to “Message Display” (P309) and “Troubleshooting” (P312) for details. • Depending on your environment, transmission speed between the camera and wireless access point may decrease. In addition, the wireless access point may not be available for use.
10. Using the Wi-Fi function Connecting quickly with the same settings as the previous ones ([Select a destination from History]/[Select a destination from Favorite]) When the Wi-Fi function is used, a record is saved in the history. You can register records as favourites. Using the history or favourites list, you can easily connect with the same settings as used previously. Check to see if the Wi-Fi settings of the device to connect to are the same as used previously.
10. Using the Wi-Fi function Editing the history registered to favourites 1 Select the menu. (P50) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Function] > [Select a destination from Favorite] 2 Select the favourite history you want to edit, and then press 1. [Remove from Favorite] [Change the Order in Favorite] [Change the Registered Name] — Select the destination. • For information on how to enter characters, refer to P57. • A maximum of 30 characters can be entered.
10. Using the Wi-Fi function [Wi-Fi Setup] Menu Configure the settings required for the Wi-Fi function. The settings cannot be changed when connected to Wi-Fi. Select the menu. (P50) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Setup] You can improve security by enabling password entry for a direct connection to a smartphone. [Wi-Fi Password] [ON]: Connects the camera and a smartphone using an SSID and password. (P250) [OFF]: Connects the camera and a smartphone using an SSID.
10. Using the Wi-Fi function To prevent incorrect operation or use of the Wi-Fi function by a third party and to protect saved personal information, it is recommended that you protect the Wi-Fi function with a password. [Wi-Fi Function Lock] Setting a password will automatically display the password input screen when the Wi-Fi function is used. [Setup]: Enter any 4-digit numbers as the password. [Cancel] • For information on how to enter characters, refer to P57. • Make a copy of password.
11. Connecting to other equipment Watching 4K motion pictures on a TV/ Saving 4K motion pictures on your PC or recorder Watching motion pictures in 4K ∫ Playing Back on a TV Screen By connecting the camera to a TV that supports motion pictures in 4K and playing back motion pictures recorded with their size set to [4K] in [Rec Quality], you can enjoy finely-detailed motion pictures in 4K.
11. Connecting to other equipment Storing 4K motion pictures You cannot dub motion pictures recorded with their size set to [4K] in [Rec Quality] to Blu-ray discs and DVDs with Panasonic recorders. (As of May 2019) ∫ Storing on a PC Refer to P289 for details. You can use the software “PHOTOfunSTUDIO” (P290) to convert the file size of a motion picture to a smaller size or copy it to a DVD. • Refer to the operating instructions of “PHOTOfunSTUDIO” (PDF).
11. Connecting to other equipment Playing Back Pictures on a TV Screen You can view pictures on a TV screen by connecting your camera to your TV with the HDMI micro cable. Preparations: Turn this unit and the TV off. 1 Connect the camera and a TV. • Check the direction of the terminals and plug in/out straight holding onto the plug. (It may result in malfunction by the deforming of the terminal if it is plugged in obliquely or in wrong direction.) Do not connect devices to incorrect terminals.
11. Connecting to other equipment The recorded pictures can be played back on a TV with an SD Memory Card slot • Depending on the TV model, pictures may not be displayed on the full screen. • The file format of the motion pictures that can be played back differs depending on the TV model. • In some cases, panorama pictures cannot be played back. Also, auto-scroll playback of panorama pictures may not work. • For cards compatible with playback, refer to the operating instructions of the TV.
11. Connecting to other equipment Using VIERA Link (HDMI) What is the VIERA Link (HDMI) (HDAVI Control™)? • This function allows you to use your remote control for the Panasonic TV for easy operations when this unit has been connected to a VIERA Link compatible device using an HDMI micro cable for automatic linked operations. (Not all operations are possible.
11. Connecting to other equipment Saving still pictures and motion pictures on your PC You can acquire recorded pictures to a PC by connecting the camera and the PC. • Some PCs can read directly from the card removed from the camera. For details, refer to the operating instructions of your PC. ∫ PC that can be used The unit can be connected to any PC capable of recognising a mass storage device. • Windows support: Windows 7/Windows 8/Windows 8.1/Windows 10 • Mac support: OS X v10.5 to v10.11, macOS 10.
11. Connecting to other equipment Downloading software Download and install software to edit and play back images with a PC. PHOTOfunSTUDIO 9.9 PE This software allows you to manage images. For example, you can send pictures and motion pictures to a PC and sort them by recording date or model name. You can also perform operations such as writing images to a DVD, processing and correcting images, and editing motion pictures. Check the site below to download and install the software.
11. Connecting to other equipment SILKYPIX Developer Studio SE This is software to edit RAW format images. Edited images can be saved in a format (JPEG, TIFF, etc.) that can be displayed on a personal computer. Check the site below to download and install the software. http://www.isl.co.jp/SILKYPIX/english/p/ • Operating environment OS Windows Windows® 7, Windows® 8.1, Windows® 10 Mac OS X v10.10, v10.11, macOS 10.12 to 10.
11. Connecting to other equipment Transferring images to a PC Preparations: Install “PHOTOfunSTUDIO ” to the PC. (P290) 1 Connect the computer and camera with the USB connection cable (supplied). • Please turn this unit on and your PC before connecting. • Check the direction of the terminals and plug in/out straight holding onto the plug. (It may result in malfunction by the deforming of the terminal if it is plugged in obliquely or in wrong direction.) Do not connect devices to incorrect terminals.
11. Connecting to other equipment ∫ Copying to a PC without using “PHOTOfunSTUDIO ” (For Mac) Even if you are using a Mac, or in any situation where “PHOTOfunSTUDIO” cannot be installed, you can still copy files and folders by connecting the camera to the computer and then dragging and dropping them to it. • The content (folder structure) on the card of this unit is as follows.
11. Connecting to other equipment Saving still pictures and motion pictures on a Recorder If you insert card holding content recorded with this unit into a Panasonic recorder, you can dub the content to a Blu-ray Disc or DVD etc. Methods to export still pictures and motion pictures to other devices will vary depending on the file format. (JPEG, RAW, MPO, AVCHD, or MP4). • Before using the card, insert it into the dedicated adaptor.
11. Connecting to other equipment Printing the Pictures If you connect the camera to a printer supporting PictBridge, you can select the pictures to be printed out and instruct that printing be started on the camera’s monitor. • Group pictures will not be displayed as group pictures but as single pictures. • Some printers can print directly from the card removed from the camera. For details, refer to the operating instructions of your printer. Preparations: Turn on the camera and the printer.
11. Connecting to other equipment • Disconnect the USB connection cable after printing. • Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining battery power becomes low while the camera and the printer are connected, the alarm beeps. If this happens during printing, stop printing at once. If not printing, disconnect the USB connection cable. • Do not disconnect the USB connection cable while [å] (Cable disconnect prohibit icon) is displayed.
11. Connecting to other equipment ∫ Print Settings Select and set the items both on the screen in step 2 of the “Selecting a single picture and printing it” and in step 3 of the “Selecting multiple pictures and printing them” procedures. [Print with Date] Sets date printing. [Num.of prints] Sets the number of pictures to be printed (up to 999 pictures). [Paper Size] Sets the paper size. [Page Layout] Sets whether or not to add borders and how many pictures to be printed on each sheet of paper.
11. Connecting to other equipment Enjoying 3D pictures Taking 3D pictures Attaching the 3D interchangeable lens (H-FT012: optional) to the camera allows you to take 3D pictures for extra impact. 1 2 Attach the 3D interchangeable lens to the camera. Bring the subject into the frame and record by pressing the shutter button fully. • Focusing is not required when recording 3D pictures. • Still pictures recorded with the 3D interchangeable lens attached are saved in MPO format (3D).
11. Connecting to other equipment Playing back 3D pictures Connecting the camera to a 3D compatible television and playing back pictures taken in 3D allows you to enjoy 3D pictures for extra impact. Preparations: Set the [HDMI Mode (Play)] to [AUTO], [1080p] or [1080i]. (P217) Set the [3D Playback] to [ ]. (P218) Connect the unit to a 3D compatible television using the HDMI micro cable and display the playback screen.
11.
12. Others Optional accessories • Some optional accessories may not be available in some countries. AC adaptor (optional)/DC coupler (optional) By using the AC adaptor (optional) and DC coupler (optional), you can record and play back without worrying about the remaining battery charge. The optional DC coupler can only be used with the designated Panasonic AC adaptor (optional). • Always use a genuine Panasonic AC adaptor (optional).
12. Others Monitor Display In recording 50p 4:3 L AFS ラュン OFF × Fn5 OFF Fn6 OFF BKT 3.5 60 BKT 0 200 BKT AWB Fn7 1pic. STD.
12. Others 2 4 A› Quality (P188) AF area (P98, 107) AFS AFF AFC MF Focus Mode (P100, 110) Spot metering target (P189) Post Focus (P132) Centre marker display (P208) š Ø Self-timer (P141) AF Mode (P102) Mic level display (P202) Pull Focus (P173) Silent Mode (P204) Face Recognition (P198) AFL AE Lock (P113) AEL AF Lock (P113) AE Burst (P139) Programme Shift (P77) 4K Photo (P122) Self-timer (P141) 3.
12.
12. Others In playback 2 4:3 1 L 1/98 Icon indicating the presence of a marker (P127) SLF 4K Photo (4K burst file) (P122) 67 '$< Post Focus (P132) Focus Stacking (P136) PRQWK GD\V F3.
12. Others 4 3 Clear Retouch completed icon (P234) Name¢2 (P200, 201) Currently retrieving information icon Title¢2 (P235) Playback (Motion Pictures) (P175) 67 '$< Number of days that have passed since the departure date (P213) Location¢2 (P213) 5 Recording information Upload (Wi-Fi) (P270) Burst Picture Group Display (P180) [Time Lapse Shot] Picture Group Display (P180) Display for the Stop Motion Animation Group (P180) SUB MENU Sub Menu (P270) Silent Mode (P204) PRQWK GD\V Age (P200, 20
12. Others In playback Detailed information display 60 F3.5 0 WB ISO AWB 200 AFS P STD. 10:00 1.DEC.
12. Others In playback Histogram display F3.5 60 0 ISO200 1 1/98 100-0001 3 1/98 Histogram (P45) 2 Picture number/Total pictures 100-0001 Folder/File number (P293) Recording information ¢1 m: minute, s: second ¢2 It is displayed in order of [Title], [Location], [Name] ([Baby1]/[Baby2], [Pet]), [Name] ([Face Recog.]).
12. Others Message Display Confirmation messages or error messages will be displayed on the screen in some cases. The major messages are described below as examples. [Recording stopped due to overheating. Please wait for the camera to cool down.]/ [Temporarily disabled. Please wait for the camera to cool down.] • The camera stops operating for self-protection in the manner described below when overheated due to, for example, high ambient temperature or continuous 4K photo or motion picture recording.
12. Others [Memory Card Error]/[This memory card cannot be used] • Use a card compatible with this unit. (P28) [Insert SD card again]/[Try another card] • An error has occurred accessing the card. Insert the card again. • Insert a different card. [Read Error/Write Error Please check the card] • It has failed to read or write data. Remove the card after turning this unit off. Insert the card again, turn this unit on, and try to read or write the data again. • The card may be broken.
12. Others [Connection failed. Please retry in a few minutes.]/[Network disconnected. Transfer stopped.] • Radio waves from the wireless access point are getting weak. Perform the connection closer to the wireless access point. • Depending on the wireless access point, connection may be automatically disconnected after specific time has passed. Reconnect the connection again. [Connection failed] • Change the access point to connect to in the smartphone Wi-Fi settings to this camera.
12. Others Troubleshooting First, try out the following procedures (P312 to P320). If the problem is not resolved, it may be improved by selecting [Reset] (P219) on the [Setup] menu. Battery and power source The camera cannot be operated even when it is turned on. The camera turns off immediately after it is turned on. • The battery is exhausted. Charge the battery. (P19) This unit is turned off automatically. • [Economy] is enabled. (P216) The charging lamp blinks.
12. Others Taking pictures is not possible. The shutter will not operate immediately when the shutter button is pressed. • Is [Focus/Release Priority] in the [Custom] menu set to [FOCUS]? (P206) You cannot take a picture until the subject is brought into focus. The recorded picture is whitish. • Picture might look whitish when lens or image sensor gets dirty with fingerprints or similar. > If the lens is dirty turn the camera off and then gently wipe the lens surface with a soft, dry cloth.
12. Others The subject appears distorted on the picture. • If you record a moving subject when using the electronic shutter or recording motion picture or a 4K photo, the subject may appear distorted on the picture. This is characteristic of MOS sensors which serve as the camera’s pickup sensors. This is not a malfunction. Striping or flicker may appear under lighting such as fluorescent lighting and LED lighting fixture. • This is characteristic of MOS sensors which serve as the camera’s pickup sensors.
12. Others Motion pictures This unit suddenly turns off during recording. • The camera stops operating for self-protection in the manner described below when overheated due to, for example, high ambient temperature or continuous motion picture recording. Wait until the camera cools down. – Continuous recording, motion picture recording, and the Wi-Fi connection will be temporarily disabled.
12. Others Flash The flash is not activated. • Is the flash closed? Open the flash. (P158) • When the electronic shutter is used, the flash is not activated. (P193) • When [Silent Mode] is set to [ON], the flash is not activated. (P204) Monitor The Monitor turns off although the camera is turned on. • If no operations are performed during the set time period, [Auto Monitor Off] (P216) is activated, and the Monitor turns off.
12. Others Wi-Fi function A Wi-Fi connection cannot be established. Radio waves get disconnected. Wireless access point is not displayed. ∫ General tips for using a Wi-Fi connection • Use within the communication range of the device to be connected. • Is any device, such as microwave oven, cordless phone, etc., that uses 2.4 GHz frequency operated nearby? > Radio waves may get interrupted when used simultaneously. Use them sufficiently away from the device.
12. Others The PC is not recognised when I use a Wi-Fi connection. The camera cannot be connected to PC via Wi-Fi connection. • The default workgroup name is set to “WORKGROUP”. If you changed the workgroup name, the PC will not be recognised. In [Change Workgroup Name] in [PC Connection] of the [Wi-Fi Setup] menu, change the workgroup name to that of the PC you are connecting to. (P282) • Please confirm login name and password are correctly typed.
12. Others TV, PC and printer The picture does not appear on the television. • Is the camera connected to the TV correctly? (P286) > Set the TV input to external input mode. VIERA Link does not work. • Is the [VIERA Link] on this unit set to [ON]? (P218) > Check the VIERA Link setting on the connected device. > Turn this unit off and on. Cannot communicate with the PC. • Set to [PC] in [USB Mode]. (P216, 292) • Turn this unit off and on. The card is not recognised by the PC.
12. Others Others The shutter remains closed when the camera is turned off (including Sleep Mode). • If the camera is shaken, it may cause the shutter to close. This is not a malfunction. Do not put your finger in the mount. Turning on the camera will re-open the shutter. When I shake the camera, I hear a rattling sound from the attached lens. • Depending on the lens you attach, it may move inside and create a sound. This is not a malfunction. The camera makes a noise when this unit is turned on.
12. Others Cautions for Use Optimal use of the camera Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). • If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation. • Do not use this unit near cell phones because doing so may result in noise adversely affecting the pictures and/or sound.
12. Others Cleaning Before cleaning the camera, remove the battery or the DC coupler (optional), or disconnect the power plug from the outlet. Then wipe the camera with a dry, soft cloth. • When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet cloth, and then with a dry cloth. • Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean the camera, since it may deteriorate the external case or the coating may peel off.
12. Others About the Monitor • Do not press the monitor with excessive force. Uneven colours may appear on the monitor and it may malfunction. • If the camera is cold when you turn it on, the picture on the Monitor will be slightly darker than usual at first. However, the picture will return to normal brightness when the internal temperature of the camera increases. Extremely high precision technology is employed to produce the Monitor screen.
12. Others Battery The battery is a rechargeable lithium ion battery. Its ability to generate power comes from the chemical reaction that takes place inside it. This reaction is susceptible to the surrounding temperature and humidity. If the temperature is too high or too low, the operating time of the battery will become shorter. Always remove the battery after use. • Place the removed battery in a plastic bag, and store or keep away from metallic objects (clips, etc.).
12. Others About 3D ∫ About 3D recording With the 3D interchangeable lens attached, do not record a subject at less than the minimum focus distance. • The 3D effects may be more pronounced, and therefore cause tiredness or discomfort. • When the 3D interchangeable lens (H-FT012: optional) is used, the minimum focus distance is 0.6 m (2.0 feet). When recording with the 3D interchangeable lens attached, be careful not to shake the unit.
12. Others About the personal information If a name or birthday is set for [Profile Setup]/Face Recognition function, this personal information is kept in the camera and recorded in the image. We recommend that you enable [Wi-Fi Password] and [Wi-Fi Function Lock] to protect personal information. (P282 , 283) Disclaimer • Information including personal information may be altered or vanish due to erroneous operation, effect of static electricity, accident, malfunction, repair, or other handlings.
12. Others About the picture data • Recorded data may be damaged or lost if the camera breaks down due to inappropriate handling. Panasonic will not be liable for any damage caused due to loss of recorded data. About tripods or unipods • When you use a tripod, make sure the tripod is stable when this unit is attached to it. • You may not be able to remove the card or the battery when using a tripod or unipod.
12. Others ∫ Do not use the camera in areas with magnetic fields, static electricity or interference • Do not use the camera in areas with magnetic fields, static electricity or interference, such as near microwave ovens. These may cause the interruption of the radio waves. • Using the camera near devices such as microwave ovens or cordless telephones that use the 2.4 GHz radio wave band may cause a decrease in performance in both devices.
12. Others • G MICRO SYSTEM is a lens exchange type digital camera system of LUMIX based on a Micro Four Thirds System standard. • Micro Four Thirds™ and Micro Four Thirds Logo marks are trademarks or registered trademarks of Olympus Corporation, in Japan, the United States, the European Union and other countries. • Four Thirds™ and Four Thirds Logo marks are trademarks or registered trademarks of Olympus Corporation, in Japan, the United States, the European Union and other countries.
12. Others • The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance®. • The Wi-Fi Protected Setup™ Logo is a certification mark of Wi-Fi Alliance®. • “Wi-Fi®” is a registered trademark of Wi-Fi Alliance®. • “Wi-Fi Protected Setup™”, “WPA™”, and “WPA2™” are trademarks of Wi-Fi Alliance®. • DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living Network Alliance. • This product uses “DynaFont” from DynaComware Corporation.
Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
