User manual

259
10. Using the Wi-Fi function
Sending images to PC
• Create a PC user account [account name (up to 254 characters) and password (up to
32 characters)] consisting of alphanumeric characters. An attempt to create a receive folder
may fail if the account includes non-alphanumeric characters.
∫ When using “PHOTOfunSTUDIO”
1 Install “PHOTOfunSTUDIO” to the PC. (P283)
2 Create a folder that receives images with “PHOTOfunSTUDIO”.
• To create the folder automatically, select [Auto-create]. To specify a folder, create a new
folder, or set a password to the folder, select [Create manually].
• For details, refer to the operating instructions of “PHOTOfunSTUDIO” (PDF).
∫ When not using “PHOTOfunSTUDIO”
(For Windows)
Supported OS: Windows 7/Windows 8/Windows 8.1/Windows 10
Example: Windows 7
1 Select a folder you intend to use for receiving, then right-click.
2 Select [Properties], then enable sharing of the folder.
• For details, refer to the operating instructions of your PC or Help on the OS.
You can send pictures and motion pictures recorded
with this unit to a PC.
Preparations
(On the camera)
• If the workgroup of the destination PC has
been changed from the standard setting, you
also need to change the setting of this unit in
[PC Connection]. (P275)
(On your PC)
• Turn the computer on.
• Prepare folders for receiving images on the
PC before sending a picture to the PC.
(P259)
To create a folder that receives images