Basic Operating Instructions

Menu Guide

(ENG) DVQX1761

2 Select frames to combine.

Recorded motion picture and 4K burst files can be divided in two. It is recommended for

when you want to divide a part you need with a part you do not need.

Dividing a file is permanent. Decide before you divide!

1 Press 2/1 to select the file to divide, and then press [MENU/SET].

Select the frames so that the moving subject will not overlap on the preceding or

subsequent frames. (The sequence composition may not be created properly if the

subject overlaps.)

1 Drag the slide bar or use

3/4/2/1 to select the

frames to combine.

2 Press [MENU/SET].

• The selected frames are remembered, and the display

goes to the preview screen.

•Press 3/4 to select items and press [MENU/SET] to

perform the following operations.

– [Next]:

Lets you select more frames for combining.

– [Reselect]:

Discards the frame selected immediately before and lets you select a different image.

3 Repeat steps 1 and 2 to select more frames to combine.

• You can select 3 to 40 frames.

4 Press 3/4 to select [Save], and then press [MENU/SET].

Pictures are saved in JPEG format. Recording information (Exif information) of the first frame

such as shutter speed, aperture, and ISO sensitivity are also registered.

Tips for [Sequence Composition]

We recommend using a tripod to take pictures for [Sequence Composition].

[Video Divide]

> [Playback] > [Video Divide]

2 Press 3 at the location to divide.

• You can finely adjust the location for division by pressing

2/1 while the file is paused.

3 Press 4.

• The file may be lost if the card or battery is removed while

processing the dividing.

¥ It may not be possible to divide a file at a point near the beginning or end.

¥ This function is not available in the following case:

– When the recording time is short.

DC-G90-G91EB-DVQX1761_eng.book 61 ページ２０１９年４月２日　火曜日　午後４時５９分