Basic Operating Instructions

Recording
36
DVQX1761 (ENG)
3
Press the shutter button fully to start
recording.
• The focus point changes automatically while recording.
When the icon (
B
) disappears, recording automatically
ends.
• A motion picture will be recorded with [Rec Format] set to [MP4]. (Audio will not be recorded.)
• When [Auto Review] is enabled, a screen that lets you select the desired focus area will
be displayed. (P36)
1 Select an image with the [ ] icon on the playback
screen, and press 3.
2 Touch the desired focus area.
• If a picture that is in focus is not available for the selected
area, a red frame will be displayed. You cannot save a
picture in this case.
• You cannot select the edges of the screen.
• You can fine-adjust the focus by dragging the slide bar
during enlarged display. (You can also perform the same
operation by pressing 2/1.)
3 Touch [ ] to save the picture.
• The picture will be saved in JPEG format.
¥ When the ambient temperature is high or Post Focus recording is performed continuously, the
camera may display [ ] and recording may stop. Wait until the camera cools down.
¥ During recording, the angle of view will be narrower.
Selecting the Focus Position for the Picture to Save
Button operation Touch operation Description of operation
3/4/2/1/
/
Touching
Selects a focus area.
• It cannot be selected during enlarged display.
Enlarges the display.
Reduces the display (during enlarged display).
Fn1 Switches to the Focus Stacking function. (P37)
s
In-focus portions are highlighted with colour.
([Peaking])
• Switches in order of [ ]>[]
([LOW]) > [ ] ([HIGH]).
[MENU/SET] Saves the picture.
Fn1
DC-G90-G91EB-DVQX1761_eng.book 36 ページ ２０１９年４月２日 火曜日 午後４時５９分