Operating Instructions Digital Camera Model No. DC-G100 DC-G110 Please read these instructions carefully before using this product, and save this manual for future use.
Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic Digital Camera. Please read this document carefully and keep it handy for future reference. Please note that the actual controls and components, menu items, etc. of your Digital Camera may look somewhat different from those shown in the illustrations in this document. Carefully observe copyright laws.
About Operating Instructions Symbols Used in This Document Black icons show conditions in which these can be used, and gray icons show conditions in which these cannot be used. Example: / Recording mode Pictures · Videos Operating symbols Front dial Cursor button up/down/left/right [MENU/SET] button Control dial • Other symbols, such as icons shown on the camera screen, are also used in explanations. • This document describes the procedure for selecting menu items as follows: ].
About Operating Instructions Notification classification symbols To confirm prior to using the function Hints for better use of the camera and tips for recording Notifications and supplementary items regarding specifications Related information and page number • The images and drawings of this document are an illustration to explain the functions. • Description in these operating instructions is based on the interchangeable lens (H-FS12032).
Chapters 1. Introduction 20 2. Getting Started 30 3. Basic Operations 50 4. Recording Mode 76 5. Image Recording 119 6. Focus/Zoom 126 7. Drive/Shutter/Image Stabilizer 159 8. Brightness (Exposure)/Coloring/ Picture effect 209 9. Flash 228 10. Recording Videos 240 11. Playing Back and Editing of Images 272 12. Camera Customization 293 13. Menu Guide 309 14. Wi-Fi/Bluetooth 373 15. Connecting to Other Devices 434 16.
Contents About Operating Instructions...................................................... 3 Chapters..................................................................................... 5 Contents by Function................................................................ 16 1. Introduction 20 Before Use................................................................................ 20 Standard Accessories............................................................... 22 Lenses That Can Be Used.....
Contents 3. Basic Operations 50 Basic Recording Operations..................................................... 50 How to Hold the Camera................................................................... 50 Taking Pictures.................................................................................. 52 Recording Videos.............................................................................. 53 Selecting the Recording Mode..........................................................
Contents 4. Recording mode 76 Intelligent Auto Mode................................................................ 76 [Intelligent Auto] menu...................................................................... 81 Taking pictures with different color tones, degrees of blurriness, and brightness.................................................................................. 83 Self Shot Mode ([Self Shot]).....................................................
Contents 6. Focus/Zoom 126 Selecting the Focus Mode...................................................... 126 Using AF................................................................................. 128 [AF Sensitivity(Photo)].................................................................... 130 Selecting the AF Mode............................................................ 131 [Face/Eye Detection]....................................................................... 133 [Tracking]...............
Contents 7. Drive/Shutter/Image Stabilizer 159 Selecting the Drive Mode........................................................ 159 Taking Burst Pictures.............................................................. 160 4K Photo Recording................................................................ 164 Selecting Pictures from a 4K Burst File.................................. 170 Picture Selection Operations.......................................................... 172 Post-Focus Recording...........
Contents 8. Brightness (Exposure)/Coloring/Picture effect 209 [Metering Mode]...................................................................... 209 Exposure Compensation........................................................ 210 Locking Focus and Exposure (AF/AE Lock)........................... 212 ISO Sensitivity........................................................................ 214 White Balance (WB)...............................................................
Contents 10. Recording Videos 240 Recording Videos.................................................................... 240 Taking pictures while a video is being recorded.............................. 244 Creative Video Mode.............................................................. 246 [4K Live Cropping].......................................................................... 249 Slow & Quick Mode................................................................ 252 Slow & Quick Menu...............
Contents 11. Playing Back and Editing of Images 272 Playing Back Pictures............................................................. 272 Playing Back Videos............................................................... 274 Extracting a Picture......................................................................... 276 Switching the Display Mode.................................................... 277 Enlarged Display.............................................................................
Contents 13. Menu Guide 309 List of Menu............................................................................ 310 Menus displayed in specific recording modes........................ 314 [Intelligent Auto] menu.................................................................... 314 [Creative Video] menu.................................................................... 314 [Slow & Quick] menu....................................................................... 315 [Scene Guide] menu............
Contents 16. Materials 449 Using Optional Accessories.................................................... 449 External Flash (optional)................................................................. 449 External Microphones (Optional).................................................... 450 AC Adaptor (Optional)/DC Coupler (Optional)................................ 453 Monitor/Viewfinder Displays.................................................... 454 Recording Screen...................................
Contents by Function Power Source Charging Charging error Battery indication Power save function Number of pictures that can be taken, available recording time 31 34 35 37 486 Card Cards that can be used [Format] Folder structure [Folder / File Settings] [No.
Contents by Function Image Stabilizer [Stabilizer] [E-Stabilization (Video)] Drive Drive mode [Burst] [4K PHOTO] [Post Focus] [Self Timer] [Time Lapse Shot] Recording with Stop Motion Animation Image Quality [Picture Size] [Quality] RAW JPEG [Aspect Ratio] [White Balance] [Photo Style] [Filter Settings] [Color Space] [Highlight Shadow] [i.Dynamic] [i.Resolution] [Long Shtr NR] [Shading Comp.
Contents by Function Video Recording Video recording Taking pictures while a video is being recorded [Ex. Tele Conv.
Contents by Function Connecting with Other Devices Sending images (PC) 440 Printing 446 Viewing on a TV 436 HDMI output 434 439 Wi-Fi/Bluetooth Bluetooth connection Wi-Fi connection [Wi-Fi Setup] Smartphone app “LUMIX Sync” [Remote shooting] Location information Sending images ([Smartphone]) Sending images ([PC]) Sending images ([Printer]) Sending images ([AV device]) Sending images ([Web service]) Sending images ([Cloud Sync.
1. Introduction Before Use Firmware of Your Camera/Lens Firmware updates may be provided in order to improve camera capabilities or to add functionality. For smoother recording, we recommend updating the firmware of the camera/lens to the latest version. • For the latest information on the firmware or to download/update the firmware, visit the following support site: https://panasonic.
1. Introduction Condensation (When the Lens, the Viewfinder or Monitor is Fogged Up) • Condensation occurs when there are temperature or humidity differences. Take care as this may lead to soiling, mold, and malfunctions in the lens, viewfinder, and monitor. • If condensation occurs, turn off the camera and leave it for approx. 2 hours. The fog will disappear naturally when the temperature of the camera becomes close to the ambient temperature.
1. Introduction Standard Accessories Check that all the accessories are supplied before using the camera. • The accessories and their shape will differ depending on the country or area where the camera was purchased. For details on the accessories, refer to “Operating Instructions ” (supplied). • Digital camera body is referred to as camera in this document. • Battery pack is referred to as battery pack or battery in this document. • The memory card is optional.
1. Introduction Lenses That Can Be Used This unit can use the dedicated lenses compatible with the Micro Four Thirds™ System lens mount specification (Micro Four Thirds mount). You can also use a lens of any of the following standards by attaching a mount adaptor.
1. Introduction Memory Cards That Can Be Used You can use the following memory cards with this camera. • SD memory card, SDHC memory card, and SDXC memory card are referred to by the generic name of card in this document. SD memory card (512 MB to 2 GB) • The camera supports SDHC/SDXC memory cards compliant with UHS Speed Class 3 of the UHS-I standard. • Operation with the Panasonic cards on the left has been verified.
1. Introduction • You can prevent the writing and deleting of data by on the card to setting the write-protect switch “LOCK”. • The data stored on a card may be damaged due to electromagnetic waves, static electricity or a failure of the camera or card. We recommend backing up important data. • Keep the memory card out of reach of children to prevent swallowing.
1. Introduction Names of Parts Camera 11 12 1 2 3 4 5 10 9 8 7 13 14 1 6 15 16 23 22 21 20 19 18 17 1 Shoulder strap eyelet (30) 12 2 [ ] (Exposure compensation) button (210)/ Fn button (Fn1) (294) Hot shoe (hot shoe cover) (449) • Keep the hot shoe cover out of reach of children to prevent swallowing.
1. Introduction 31 28 29 30 24 25 26 27 32 33 34 35 40 39 38 37 36 24 Diopter adjustment dial (57) 35 [USB/CHARGE] socket (33, 435) 25 Eye cup (478) 36 Card/Battery door (31, 39) 26 Viewfinder (58, 454) 37 Release lever (31, 39) 27 Eye sensor (58) DC Coupler cover (453) • When using an AC adaptor, ensure that the Panasonic DC 38 Coupler (DMW-DCC11: optional) and AC Adaptor (DMW-AC10: optional) are used.
1.
1. Introduction Tripod grip 1 Camera screw 1 2 Camera stand 2 3 Fastening knob 4 Hand strap eyelet 5 Video rec. button 6 Shutter button 7 Sleep button 8 Grip 9 Connection cable 3 9 4 5 6 7 8 • For information on how to attach the camera and operate the tripod grip, refer to page 72. Monitor Displays At the time of purchase, the monitor displays the following icons. • For information about the icons other than those described here, refer to page 454.
2. Getting Started Attaching a Shoulder Strap Attach a shoulder strap to the camera with the following procedure to prevent it from dropping. 1 2 3 4 • Pull the shoulder strap and check that it will not come out. • Attach the opposite end of the shoulder strap with the same procedure. • Use the shoulder strap around your shoulder. –– Do not wrap the strap around your neck. It may result in injury or accident. • Do not leave the shoulder strap where an infant can reach it.
2. Getting Started Charging the Battery Insert the battery in the camera and charge it. • The battery that can be used with the camera is DMW-BLG10. (As of June 2020) • The battery is not charged at the time of purchase. Charge the battery before use. • Check that this unit is turned off. Battery Insertion • Always use genuine Panasonic batteries (DMW-BLG10). • If you use other batteries, we cannot guarantee the quality of this product.
2. Getting Started Removing the Battery Push the lever in the direction of the arrow. • Remove the battery after use. (The battery will drain if left inserted in the camera for a long period of time.) • To remove the battery, turn the camera off and wait until the LUMIX indicator on the screen goes off. (Failure to wait may cause the camera to malfunction and may damage the card or recorded data.) • The battery becomes warm after use, during charging, and immediately after charging.
2. Getting Started Charging battery Charging time Approx. 190 min. • Using the camera body and the supplied AC adaptor. • The indicated charging time is for when the battery has been discharged completely. The charging time may vary depending on how the battery has been used. The charging time for the battery in hot/cold environments or a battery that has not been used for a long time may be longer than normal. • Use the products supplied with the camera for charging.
2. Getting Started Charging lamp indications Charging lamp (Red) On: Charging in progress Off: Charging complete Flashing: Charging error • You can also charge the battery by connecting a USB device (PC, etc.) and the camera with the USB connection cable. In that case, charging may take a while. • Do not use any other USB connection cables except the supplied one. This may cause malfunction. • Do not use any other AC adaptors except the supplied one. This may cause malfunction.
2. Getting Started Notifications Regarding Charging Power Indications 75% or higher 60p 74% to 50% 49% to 25% 24% or below Blinking in red Low battery • Charge or replace the battery. • The battery level indicated on the screen is approximate.
2. Getting Started • To ensure that safe products are used, we recommend that a genuine Panasonic battery pack is used. There is a possibility that other battery packs may lead to fire or explosion. Please be advised that we are not liable for any accident or failure occurring as a result of use of a counterfeit battery pack. • Do not leave any metal items (such as clips) near the contact areas of the power plug.
2. Getting Started [Economy] This is a function to automatically turn the camera to sleep (power save) status or turn off the viewfinder/monitor if no operation is performed for a set time. Reduces battery consumption. [ ] Select [Economy] [Sleep Mode] [Sleep Mode(Wi-Fi)] [Auto LVF/Monitor Off] Sets the amount of time until the camera is put to sleep. Sets the camera to sleep 15 minutes after being disconnected from Wi-Fi. Sets the amount of time it takes for the viewfinder/monitor to turn off.
2. Getting Started • [Economy] is not available in the following cases: –– While connected to a PC or printer –– During video recording/video playback –– When recording with [4K Pre-Burst] –– During a [Time Lapse Shot] –– When recording with [Stop Motion Animation] (when [Auto Shooting] is set) –– When recording with [Live View Composite] –– When recording with [Multi Exp.
2. Getting Started Inserting Cards (Optional) • Make sure that the camera is turned off. 1 3 2 Do not touch the card connection contacts. Card Access Indications The access indication displays red while the card is being accessed. Removing a Card Push the card until it clicks and then pull the card out straight.
2. Getting Started • To remove the card, turn the camera off and wait until the LUMIX indicator on the screen goes off. (Failure to wait may cause the camera to malfunction and may damage the card or recorded data.) • The card may be warm just after the camera has been used. Be careful when removing. • Do not perform the following operations during access. The camera may operate incorrectly or the card and recorded images may be damaged. –– Turn off the camera.
2. Getting Started Attaching a Lens • Make sure that the camera is turned off. • Change the lens in a location where there is not a lot of dirt and dust. If dirt or dust gets on the lens, refer to page 477. • Change the lens while the lens cap is attached. • When attaching or detaching the interchangeable lens (H-FS12032/HFS35100), retract the lens barrel. Align the lens fitting marks on the lens and camera and then rotate the lens in the direction of the arrow.
2. Getting Started Removing a Lens Set the camera on/off switch to [OFF]. While pressing the lens release button , rotate the lens in the direction of the arrow until it stops and then remove it. • After removing the lens, be sure to attach the body cap and the lens rear cap.
2. Getting Started Extending/retracting the lens How to Extend the Lens Rotate the zoom ring in the direction of arrow from position (the lens is retracted) to position <12 mm to 32 mm (H-FS12032), 35 mm to 100 mm (H-FS35100)> to extend the lens. Example: H-FS12032 • When the lens barrel is retracted, images cannot be recorded.
2. Getting Started Attaching the Lens Hood When recording into strong backlight, irregular reflection may occur within the lens. The lens hood reduces the inclusion of unwanted light in the recorded images and lowers the drop in contrast. The lens hood cuts off excess lighting and improves the picture quality. • The interchangeable lens (H-FS12032) does not have a lens hood.
2. Getting Started Removing the lens hood Turn the lens hood in the direction of the arrow to detach it. Temporarily Storing the Lens Hood Turn the lens hood in the direction of the arrow to detach it. Align the mark lens. ( ) on the lens hood with the mark on the tip of the Turn the lens hood in the direction of the arrow until it clicks into place.
2. Getting Started Adjusting the Monitor Direction and Angle At the time of purchase, the monitor is stowed in the camera body. Turn the monitor surface out before use. 180° 180° Free angle shooting You can rotate 180° towards the lens and 90° downwards. Taking pictures at a low angle Taking pictures at a high angle Taking pictures of yourself If you rotate the monitor as shown in the figure, the camera will switch to Self Shot Mode. (85) • The angles of adjustment are only guides.
2. Getting Started Setting the Clock (When Turning On for the First Time) When you turn the camera on for the first time, a screen to set the clock and home area appears. Be sure to set these settings before use to ensure images are recorded with the correct date and time information. 1 Set the camera on/off switch to [ON]. ●●If the language select screen is not displayed, proceed to Step 4. 2 3 4 5 When [Please set the language] appears, press . Set the language.
2. Getting Started 6 Confirm your selection. ●●Press . 7 When [The clock setting has been completed.] appears, press . 8 9 When [Please set the home area] is displayed, press Set the home area. ●●Press and press to select your home area . • If you are using Daylight Savings ], press . (The time will move [ forward by 1 hour.) To return to the normal time, press again.
2. Getting Started • If the camera is used without setting the clock, it will be set to 0:00:00, 1st January, 2020. • Clock settings are maintained for approx. 3 months using the built-in clock battery even without the battery. (Leave the fully-charged battery in the camera for approx. 24 hours to charge the built-in battery.
3. Basic Operations Basic Recording Operations How to Hold the Camera To minimize camera shake, hold the camera so that it will not move during recording. Hold the camera with both hands, keep your arms still at your side, and stand with your feet shoulder width apart. ●●Hold the camera firmly by wrapping your right hand around the camera grip. ●●Support the lens from below with your left hand. • Do not block the flash, AF Assist Lamp, microphone, or speaker with your fingers or other objects.
3. Basic Operations Vertical Orientation Detection Function This function detects when pictures were recorded with the camera held vertically orientated. With the default settings, pictures are automatically played back vertically oriented. (370) • When the camera is tilted significantly up or down, the vertical orientation detection function may not work correctly.
3. Basic Operations Taking Pictures 1 Adjust the focus. ●●Press the shutter button halfway (press it gently). ●●The aperture value and shutter speed are displayed. (If the aperture value and shutter speed are shown in red and flashing, you do not have the appropriate exposure, unless you are using the flash.) ●●Once the subject is in focus, the focus indication lights. (When the subject is not in focus, the indication blinks.) 2 Start recording. ●●Press the shutter button fully (press it further).
3. Basic Operations • Recorded pictures can be displayed automatically by setting [Auto Review] of the [Custom] ([Monitor / Display]) menu. You can also change the picture display duration to your preferred setting. (342) • With the default settings, you cannot take a picture until the subject is brought into focus. If you set [Focus/Release Priority] in the [Custom] ([Focus / Release Shutter]) menu to [BALANCE] or [RELEASE], you will be able to take a picture even when the subject is not in focus.
3. Basic Operations Selecting the Recording Mode Rotate the mode dial.
3. Basic Operations Camera Setting Operations When changing the camera settings, operate the camera using the following operation parts. Front dial (55) Control dial (55) Cursor buttons (56) [MENU/SET] button (56) Touch screen (56) Front Dial ( )/Control Dial ( ) Rotate: Selects an item or numeric value.
3. Basic Operations Cursor Buttons ( ) Press: Selects an item or numeric value. [MENU/SET] Button ( ) Press: Confirms a setting. Touch Screen Operations can be performed by touching the icons, slide bars, menus, and other items displayed on the screen. T ouch Operation of touching and then lifting your finger from the touch screen. D rag Operation of moving a finger while it touches the touch screen.
3. Basic Operations Display Settings Adjusting the Viewfinder Diopter Rotate the diopter adjustment dial while looking through the viewfinder. • Adjust until you can clearly see the text on the viewfinder.
3. Basic Operations Switching Between the Monitor and Viewfinder With the default settings, automatic viewfinder/monitor switching is set. When you look through the viewfinder, the eye sensor works and the camera switches from monitor display to viewfinder display. You can switch to viewfinder display or monitor display with [LVF] . Press [LVF].
3. Basic Operations • If [LVF Display Speed] is set to [ECO 30fps] when the viewfinder is used, the camera can be operated for a longer period since battery drainage is reduced. • In Self Shot Mode, the display automatically switches to monitor display, and the [LVF] and eye sensor are disabled. • The eye sensor may not work correctly due to the shape of eyeglasses, the way the camera is held, or bright light shining around the eyepiece.
3. Basic Operations Switching the Display Information You can switch the viewfinder/monitor display method. Press [DISP.]. ●●The display information is switched.
3. Basic Operations Viewfinder With information 60p Without information With information + level gauge Without information + level gauge 60p • You can switch the viewfinder/monitor display method: ] [ ] [LVF/Monitor Disp. Set] (347) [ Using the level gauge The yellow line indicates the current angle. Correct the angle of the camera so that it matches the white line. Horizontal Vertical Green (no tilt) • Even after correcting the tilt, there may still be an error of approx. ±1°.
3. Basic Operations Playback Screen With information Detailed information display*1 Without information Display without blinking highlights*2 1/5 2020.12.1 10:00 100-0001 switches the display information. (461) *1 Pressing *2 This is a screen without blinking highlights display that is shown when [Highlight] of the [Custom] ([Monitor / Display]) is set to [ON]. In other than this screen, overexposed parts of the screen will blink.
3. Basic Operations Quick Menu This menu enables you to quickly set functions that are frequently used during recording without calling up the menu screen. You can also change the Quick menu display method and the items to display. 1 Display the Quick menu. 2 Select a menu item. ●●Press [Q.MENU]. 60p ●●Rotate . ●●Selection is also possible by touching a menu item. 3 Select a setting item. 60p ●●Rotate . ●●Selection is also possible by touching a setting item. 4 Close the Quick menu.
3. Basic Operations • Some items cannot be set depending on the recording mode or camera settings. • The Quick menu can be customized: ] [ ] [Q.
3. Basic Operations Monitor recording information screen This screen allows you to view the current recording settings on the monitor. • This screen is displayed only when [Monitor Info. Disp.] in the [Custom] ([Monitor / Display]) menu is set to [ON]. 1 Display the monitor recording information screen. ●●Press [DISP.] several times. 2 Touch the items. ●●The setting screens for each of the items are displayed. 3 Change the setting. Example) Changing the AF Mode ●●Touch the setting item.
3. Basic Operations Steps 2 to 4 can also be changed using the following operations. Press [Q.MENU]. Press an item. Rotate (or rotate ) to select to change the settings values. • Some items cannot be set depending on the recording mode or camera settings.
3. Basic Operations Menu Operation Methods In this camera, the menu is used for setting a wide variety of functions and performing camera customizations. Menu operations can be performed using the cursors, dial, or by touch. 1 2 Display the menu. ●●Press . Switch the menu type. Press Press [ ]. . to select a tab such as • You can also select the tab by rotating or . Press 3 . Select a menu item. ●●Press to select a menu item and then press .
3. Basic Operations 4 Select a setting item and then confirm your selection. ●●Press to select a setting item and then press . ●●You can also perform the same operation by rotating to select the setting item and then pressing . 5 Close the menu. ●●Press the shutter button halfway. ●●You can also close the menu by pressing [ ] several times. • For details about menu items, refer to Menu Guide. (309) Displaying Descriptions About Menu Items and Settings If you press [DISP.
3. Basic Operations Grayed Out Menu Items Menu items that cannot be set are displayed grayed out. In some setting conditions, the reason the setting is disabled is displayed when you press if you select a grayed-out item. [Reset] Return each of the following settings to the default setting: –– Recording settings –– Network settings (settings of [Wi-Fi Setup] and [Bluetooth]) –– Custom settings ([Face Recog.
3. Basic Operations Recording Using Touch Functions Touch AF/Touch Shutter Touch functions allow you to focus on the point that you touch, release the shutter, etc. 1 2 Touch [ ]. Touch the icon. ●●The icon switches each time you touch it. Touch AF Focus on the Touched Position. Touch Shutter Record with focus on the point touched. OFF 3 — (When set to anything other than OFF) Touch the subject. • When the Touch Shutter fails, the AF area first turns red and then disappears.
3. Basic Operations Touch AE This function adjusts the brightness according to a touched position. When a subject’s face appears dark, you can make the screen brighter to match the face. 1 2 Touch [ Touch [ ]. ]. ●●The Touch AE settings screen appears. 3 Touch the subject to which you wish to adjust the brightness. • To return the position to which to adjust the brightness to the center, touch [Reset]. 4 Touch [Set]. Reset Set How to Disable Touch AE Touch [ ].
3. Basic Operations Recording with the Tripod grip It can be used as a grip for recording while walking. You can take pictures or record video without operating the camera. It can also be used as a tripod. • Use the tripod grip supplied with the DC-G100V/DC-G110V or the tripod grip (DMW-SHGR1: optional). • Insert the battery pack and a memory card into the camera before mounting it to the tripod grip.
3. Basic Operations Attaching the camera to a tripod grip • Hold the camera and tripod grip tightly, and securely attach them so that they do not drop. • For removal, perform the steps backwards. 1 2 Set the Camera on/off switch to [OFF]. Loosen the camera stand. ●●Turn the fastening knob in the direction of . Camera stand Fastening knob 3 Attach the camera to a tripod grip. ●●Align the camera screw with the tripod mount on the camera.
3. Basic Operations Using as a grip To prevent dropping, be sure to attach the supplied strap and fit it to your wrist. 1 Close the tripod grip’s legs, put your wrist through the hand strap and grip it. ●●Slide adjuster , and secure the hand strap onto your wrist. ●●When adjusting the direction of the camera, hold the camera with your hand and loosen the fastening knob to adjust the direction. After adjusting, securely tighten the fastening knob 2 Press the button and record.
3. Basic Operations Taking pictures Focus on the subject. • Press the shutter button halfway (press lightly). Take a picture. • Press the shutter button fully (push the button all the way). Recording video Start recording. • Press the video rec. button . • Immediately release the video rec. button after pressing it. End recording. • Press the video rec. button again. Sleep button ( ) Press: The camera will go into a sleep (power save) status.
4. Recording mode For information about the [ ] mode and [ ] mode, refer to pages 246 and 252, and for the [ ] mode, refer to page 305. Intelligent Auto Mode In the [ ] mode (Intelligent Auto mode), the camera detects the scene to set the optimal recording settings automatically to match the subject and recording conditions. 1 Set the mode dial to [ ]. ●●In default settings, the mode is set to Intelligent Auto Plus Mode. 2 Aim the camera at the subject.
4. Recording mode 4 Start recording. ●●Press the shutter button fully. • Backlight compensation operates automatically to prevent subjects from appearing dark when there is a backlight.
4. Recording mode Types of Automatic Scene Detection : Scenes detected during picture taking : Scenes detected during video recording : [i-Portrait] : [i-Scenery] : [i-Macro] : [i-Night Portrait]*1 : [i-Night Scenery] : [i-Handheld Night Shot]*2 : [i-Food] : [i-Baby]*3 : [i-Sunset] : [i-Low Light] : [ ]/[ ] *1 Displayed only when using flash. *2 Displayed only when [iHandheld Night Shot] is [ON].
4. Recording mode Intelligent Auto Plus Mode [ ] allows you to adjust some settings such as the brightness and color tone while also using [ ] for other settings so that you can record pictures more suited to your preferences.
4. Recording mode [AF Mode] [AF Mode] is automatically set to [ ] ([Face/Eye Detection]). • If you touch the subject, the camera switches to [ ] ([Tracking]) and the AF tracking function starts operating. ] ( ) and then press the –– The AF tracking function will also work if you press [ shutter button halfway. ] ( ) changes the AF mode. • Each press of [ • For information about AF modes, refer to page 133 and 135.
4. Recording mode [Intelligent Auto] menu [iHandheld Night Shot] If a night scene is detected automatically while the unit is being handheld, [iHandheld Night Shot] can record a still picture with less jitter and less noise without using a tripod by combining a burst of pictures. [ ]/[ ] Select [iHandheld Night Shot] Settings: [ON]/[OFF] • The flash is fixed to the [ ] (Forced Flash Off) setting.
4. Recording mode • The angle of view becomes slightly narrow. • After the shutter button has been pressed, do not move the camera during the burst operation. • This function will not work for still pictures while video is being recorded. • [iHDR] and [iHandheld Night Shot] are not available when using the following functions: –– Self Shot Mode –– [Burst] –– [4K PHOTO], [Post Focus] –– [Bracket] ], [ ], [ ] ([Quality]) –– [ –– [Ex. Tele Conv.
4. Recording mode Taking pictures with different color tones, degrees of blurriness, and brightness Setting coloring Press [ screen. ]( Rotate or ) to display the setting to adjust color. • Press the shutter button halfway to return to the recording screen. • The color setting will return to the default level (center point) when this unit is turned off or the camera is switched to another Recording mode. Setting brightness Press [ Rotate ]. or to adjust brightness.
4. Recording mode Defocusing the background (Defocus control function) Press [ ], and then press [Fn4]. Rotate or to adjust the background defocusing condition. • Press the shutter button halfway to return to the recording screen. ]. • AF Mode is set to [ The position of the AF area can be set by touching the screen. (Its size cannot be changed) 250 125 60 30 15 4.0 5.6 8.0 With touch screen operations Touch [ ]. Touch the item you want to set.
4. Recording mode Self Shot Mode ([Self Shot]) You can easily take pictures of yourself while looking at the screen. 1 Rotate the monitor as shown in the figure. ●●A mirror image will be displayed on the monitor. ●●The touch operation is enabled. ●●[Quick AF] is set to [ON]. (334) 2 Touch the item. • For details, refer to page 86. 4K Selfie (89) Built-in microphone setting ([Self Shot]) (88) 3 4 Touch [Exit]. Decide on your poses while looking at the monitor.
4. Recording mode 5 Take the picture. ●●For information on how to start taking a picture, refer to [Shutter] (87) • Regardless of the [Shutter] setting, you can start recording by pressing the shutter button or video rec. button. • With the default setting, it will focus automatically after the countdown ends. ([AF After Countdown] (350)) Setting items : Default settings OFF/1 to 10 [Soft Skin] Makes people’s faces look brighter and their skin tones look softer.
4. Recording mode [ [ [Shutter] ] (Shutter button only), [ ] (Buddy), [ ] (Face) ] (Touch), Sets the way the shutter is released. ] (Shutter button only): Push the shutter button [ to take pictures or the video rec. button to record video. ] (Touch): Focuses on the touched position before [ ]/ taking a picture. (Records a video when in [ ] mode.) [ ] (Buddy): The shutter is released when two faces [ detected move closer to each other.
4. Recording mode Recording self-shot videos with automatically adjusted settings The camera records people well-lit and with clear backgrounds by automatically focusing on them. This is good for recording self-shot videos to upload to social media. Set the mode dial to one of the following.
4. Recording mode 2 Select and touch the sound pickup range. Settings: [AUTO]/[SURROUND]/ [FRONT]/[TRACKING]/ [BACK] • For details, refer to page 267. • This does not work with [Built-in Mic] of the video menu. 4K Selfie You can switch to 4K Photo Mode and take pictures of yourself. 1 Touch [ 2 Select and touch the recording method. ]. • In Self Shot Mode, you can take pictures with [4K Burst (Wide-angle)], a setting that allows you to include a wider background.
4. Recording mode [4K Burst (Wideangle)] A 4K Photo Mode for taking selfies with an angle of view wider than that of [4K Burst] Burst speed: 15 pictures/second Audio recording: Not available • For information about other types of 4K Photo Mode and the recording methods for 4K Photo Mode, etc., refer to (166) 3 Decide on your poses while looking at the monitor. (When [4K Burst (Wide-angle)] is selected) Press the shutter button halfway.
4. Recording mode • If you set [Self Shot] to [OFF], the mode will not switch to Self Shot Mode even if you rotate the monitor. (350) • Be careful not to look at the light from the flash and the AF Assist Lamp directly. • When the [Soft Skin] is set –– If you set the strength of the effect to [2] or greater, the recording screen display will be more delayed than normal like a frame dropping. Also, when you record, it will require some time to process the image before the next shot.
4. Recording mode • When the following functions are being used, a [Background Control] setting ] (Clear) is not available: of [ –– Video recording ] mode other than [Silky Skin]/[Monochrome] –– Any mode for [ ] mode –– [ ] mode, [ ] mode, [ ] mode, [ • When [Filter Settings] in the [Rec] / [Motion Picture] menu is not available, [Filter Select] in the Self Shot Mode is also unavailable. • When recording video, [Slimming Mode] and [Shots] cannot be used.
4. Recording mode Program AE Mode In [ ] mode (Program AE mode), the camera automatically sets the shutter speed and aperture value for the brightness of the subject. You can also use Program Shift to change combinations of shutter speed and aperture values while keeping the same exposure. 1 Set the mode dial to [ ]. 2 Press the shutter button halfway. ●●This displays the aperture value and shutter speed value recording screen.
4. Recording mode Program Shift You can change the shutter speed and aperture value combination set automatically by the camera while maintaining the same exposure. With this, you can, for example, make the background more defocused by decreasing the aperture value or capture a moving subject more dynamically by slowing the shutter speed. Press the shutter button halfway. • This displays the aperture value and shutter speed value on the recording screen. (Approx. 10 seconds) Rotate or displayed.
4. Recording mode Aperture-Priority AE Mode In [ ] mode (Aperture-Priority AE mode), you can set the aperture value before recording. The shutter speed will be automatically set by the camera. Smaller aperture values Larger aperture values It becomes easier to defocus the background. It becomes easier to bring everything into focus including the background. 1 Set the mode dial to [ ].
4. Recording mode 2 3 Set the aperture value. ●●Rotate or . Start recording. • If the correct exposure is not achieved when the shutter button is pressed halfway, the aperture value and the shutter speed blink red.
4. Recording mode • The effects of the set aperture value and shutter speed will not be visible on the recording screen. To check the effects on the recording screen, use [Preview]. (106) • The brightness of the recording screen and of actual recorded images may differ. Check the images on the playback screen. • When using a lens with an aperture ring, set the position of the aperture ring to other than [A] to use the aperture value of the lens. • You can customize dial operations: ] [ ] [Dial Set.
4. Recording mode Shutter-Priority AE Mode In [ ] mode (Shutter-Priority AE mode), you can set the shutter speed before recording. The aperture value will be automatically set by the camera. Slower shutter speeds Faster shutter speeds It becomes easier to capture motion It becomes easier to freeze motion 1 98 Set the mode dial to [ ].
4. Recording mode 2 3 Set the shutter speed. ●●Rotate or . Start recording. • If the correct exposure is not achieved when the shutter button is pressed halfway, the aperture value and the shutter speed blink red. • The effects of the set aperture value and shutter speed will not be visible on the recording screen. To check the effects on the recording screen, use [Preview]. (106) • The brightness of the recording screen and of actual recorded images may differ.
4. Recording mode Manual Exposure Mode In [ ] mode (Manual Exposure mode), you can take pictures by manually setting the aperture value and shutter speed. In default settings, the ISO sensitivity is set to [AUTO]. As a result, the ISO sensitivity will be adjusted according to the aperture value and shutter speed. Exposure compensation can also be used when ISO sensitivity is set to [AUTO]. 1 Set the mode dial to [ 2 Set the aperture value and shutter speed. ●●Rotate and ].
4. Recording mode Available Shutter Speeds (Sec.) [EFC] [ESHTR] [T] (Time, max. approx. 60 seconds), 60 to 1/500 1 to 1/16000 • The effects of the set aperture value and shutter speed will not be visible on the recording screen. To check the effects on the recording screen, use [Preview]. (106) You can set the preview mode to operate constantly in [ ] mode. ] [ ] [Constant Preview] (343) [ • The brightness of the recording screen and of actual recorded images may differ.
4. Recording mode [T] (Time) If you set the shutter speed to [T], the shutter stays open when the shutter button is pressed fully. (up to approx. 60 seconds) The shutter closes if you press the shutter button again. Use this when you want to keep the shutter open for a long time to record images of fireworks, night scenery or a starry sky. • We recommend using a tripod or the shutter remote control function (391) during time recording. • Time recording may create noticeable noise.
4. Recording mode Live View Composite Recording The camera records images at set exposure time intervals, and combines parts with changes in bright light to save the result as one picture. • You can check a combined image at each exposure time interval. • This function is useful for capturing the light trails of stars and fireworks with bright night scenery in the background. • Use a tripod to minimize camera shake. 1 2 Set the mode dial to [ Start Live View Composite Recording.
4. Recording mode 5 Start recording. ●●Press the shutter button fully. • Images are combined every time the exposure time set in step 3 has passed. Histogram display. Exposure time per frame × Number of pictures combined. Elapsed time. • The time is updated with each increase in the number of pictures combined. 6 5 sec. × 1200 1h40m00s Stop recording. ●●Press the shutter button fully again. • This will run noise reduction and save the image.
4. Recording mode • [Long Shtr NR] is fixed to [ON]. • The flash will only fire on the first frame. • After an image for noise reduction is obtained, some menus are not displayed. • The image for noise reduction will be discarded if the following operations are performed. Follow step 4 again. –– Select [Start] with [Live View Composite].
4. Recording mode Preview Mode You can check the effects of aperture on the recording screen by physically closing the aperture blades of the lens to the aperture value set for actual recording. In addition to the effects of aperture, you can check the effects of shutter speed at the same time. • Use the Fn button registered with [Preview] to operate. In default settings, this is registered in the [Fn6]. For information about the Fn button, refer to page 294. Press [Fn6].
4. Recording mode Scene Guide Mode If you select a scene to suit the subject and recording conditions with reference to the example images, the camera will set optimal exposure, color, and focus, allowing you to record in a manner appropriate to the scene. 1 2 Set mode dial to [ ]. Select the scene. ●●Press press to select the scene and . • Selection is also possible by rotating or . • The scene can also be selected by touching an example image. ●●Press [DISP.
4. Recording mode • It is also possible to display the selection screen by touching the recording mode icon in recording screen. • Depending on the scene, the recording screen may seem as if frames are missed. • To change the scene, select [Scene Switch] in the [Scene Guide] menu, and . You can return to step 2. then press • Some of the recording menu items cannot be set because the camera automatically adjusts the settings to the optimal values.
4. Recording mode Types of Scene Guide Mode 1: [Clear Portrait] Setting [Soft Skin] and [Slimming Mode] You can apply the same [Soft Skin] and [Slimming Mode] settings as those specified for Self Shot Mode. Touch [ ] and select the setting item. [Soft Skin] [Slimming Mode] Makes people’s faces look brighter and their skin tones look softer. Makes people look slimmer. Touch the slide bar. • You can set it to “Off” or a value in the range [1] to [10].
4. Recording mode 4: [Relaxing Tone] 5: [Sweet Child’s Face] • When you touch the face, a still picture is recorded with the focus and exposure set for the touched location 6: [Distinct Scenery] 7: [Bright Blue Sky] 8: [Romantic Sunset Glow] 9: [Vivid Sunset Glow] 10: [Glistening Water] 11: [Clear Nightscape] • Star filter used in this mode may cause glistening effects on the objects other than water surface.
4. Recording mode 16: [Handheld Night Shot] • After the shutter button has been pressed, do not move the camera during the burst operation. • The angle of view becomes narrow slightly. 18: [Soft Image of a Flower] • For close-up recording, we recommend that you avoid using the flash. 20: [Cute Dessert] • For close-up recording, we recommend that you avoid using the flash. 22: [Clear Sports Shot] 17: [Clear Night Portrait] • Tripod, self-timer recommended.
4. Recording mode Creative Control Mode You can select the effects to be applied from sample pictures and preview these effects on the screen. 1 2 Set mode dial to [ ]. Select the filter effect. ●●Press and press to select the filter effect . • Selection is also possible by rotating or . • The filter effect can also be selected by touching an example image. Preview display ●●Press [DISP.] to switch the screen in the order of normal display, guide display, and list display.
4. Recording mode Creative Control Menu Select [ ] Allows you to display the selection screen of filter effect. [Filter Effect] [Simultaneous Record w/o Filter] Allows you to set the camera to take a picture with and without a filter effect simultaneously. Types and adjustments of filter effects 1 On the recording screen, press [ ] ( ). 2 Rotate or to set. • Press the shutter button halfway to return to the recording screen.
4.
4. Recording mode Setting the Type of Defocus ([Miniature Effect]) Set Filter effect to [Miniature Effect]. Touch [ Press portion. ], and then [ or ]. to move the in-focus • You can also move the in-focus portion by touching the screen. • You can also switch the defocus orientation ]. by touching [ Rotate or to change the size of in-focus portion. • The portion can also be enlarged/reduced by pinching out/pinching in the screen. • To reset the in-focus portion setting to the default, press [DISP.].
4. Recording mode Setting the Color to Be Left ([One Point Color]) Set Filter effect to [One Point Color]. Touch [ ], and then [ ]. Press to move the frame and select the color you want to leave. • You can also select the color you want to leave by touching the screen. • To return the frame back to the center, press [DISP.]. Press to set. Setting the Light Source Position and Size ([Sunshine]) Set Filter effect to [Sunshine]. Touch [ ], and then [ ].
4. Recording mode Taking pictures with different degrees of blurriness and brightness Brightness Press [ Rotate ]. or to adjust brightness. • Press the shutter button halfway to return to the recording screen. Defocusing the background (Defocus control function) Press [ ], and then [Fn4]. Rotate or to adjust the background defocusing condition. • Press the shutter button halfway to return to the recording screen. 250 125 60 30 15 4.0 5.6 8.
4. Recording mode With touch screen operations Touch [ ]. Touch the item you want to set. [ ]: Adjusting the filter effect [ ]: Degree of defocusing [ ]: Brightness Drag the slide bar or exposure meter to set. • Press the shutter button halfway to return to the recording screen. • Defocus control operation is not available in [Miniature Effect] ([ ] mode). • At the brightness setting screen you can assign the exposure bracket to : ] [ ] [Exposure Comp. Disp.
5. Image Recording [Aspect Ratio] You can select the image aspect ratio. [ ] Select [Aspect Ratio] [4:3] Aspect ratio of a 4:3 monitor [3:2] Aspect ratio of a standard film camera [16:9] Aspect ratio of a 16:9 TV [1:1] Square aspect ratio • When the following function is being used, [Aspect Ratio] is not available: –– [Multi Exp.
5. Image Recording [Picture Size] Sets the picture’s image size. [ ] Select [Picture Size] [Aspect Ratio] [Picture Size] 4:3 3:2 16:9 1:1 [L] 20M 5184×3888 [L] 17M 5184×3456 [L] 14.5M 5184×2920 [L] 14.5M 3888×3888 [M] 10M 3712×2784 [M] 9M 3712×2480 [M] 8M 3840×2160 [M] 7.5M 2784×2784 [S] 5M 2624×1968 [S] 4.5M 2624×1752 [S] 2M 1920×1080 [S] 3.5M 1968×1968 • When [Ex. Tele Conv.] ([Rec]) is set, the [M] and [S] picture sizes are indicated with ].
5. Image Recording [Quality] Set the compression rate used for storing pictures. [ ] Setting Select [Quality] File format Settings details JPEG images that give priority to image quality. JPEG RAW+JPEG RAW JPEG images of standard image quality. This is useful for increasing the number of recordable pictures without changing the picture size. This records RAW and JPEG images ([ simultaneously. ] or [ ]) This records RAW images.
5. Image Recording Note on RAW RAW format refers to a data format of images that have not been processed on the camera. Playback and editing of RAW images require the camera or the dedicated software. • You can process RAW images on the camera. (288) • Use software (“SILKYPIX Developer Studio” by Ichikawa Soft Laboratory) to process and edit RAW files on a PC. (444) • Pictures taken with [ ] cannot be displayed enlarged to the maximum magnification during playback.
5. Image Recording [Folder / File Settings] Set the folder and file name where to save the images. Folder name File name 100ABCDE PABC0001.JPG Folder number (3 digits, 100 to 999) Color space ([P]: sRGB, [ _ ]: AdobeRGB) 5-character user-defined segment 3-character user-defined segment File number (4 digits, 0001 to 9999) Extension [ ] Select [Folder / File Settings] [Select Folder] Selects a folder for storing images. Creates a new folder with an incremented folder number.
5. Image Recording • Each folder can store up to 1000 files. • File numbers are assigned sequentially from 0001 to 9999 in the order of recording. If you change the storage folder, a number continuing on from the last file number will be assigned. • In the following cases, a new folder with an incremented folder number will be created automatically when the next file is saved: –– The number of files in the current folder reaches 1000. –– The file number reaches 9999.
5. Image Recording [No.Reset] Refresh the folder number to reset the file number to 0001. [ ] Select [No.Reset] • When the folder number reaches 999, the number cannot be reset. We recommend backing up your data and formatting the card. • To reset the folder number to 100: Perform [Format] to format the card. (40) Perform [No.Reset] to reset the file number. Select [Yes] on the folder number reset screen.
6. Focus/Zoom Selecting the Focus Mode Select the focusing method (focus mode) to match subject movement. Set the Focus Mode. ●● [ ]/[ ] [Focus Mode] [AFS] This is suitable for recording still subjects. When the shutter button is pressed halfway, the camera focuses once. The focus stays locked while the shutter button is pressed halfway. [AFF]*1 This is suitable for recording subjects with movements that cannot be predicted.
6. Focus/Zoom • In the following cases, [AFF] or [AFC] works the same as [AFS] when the shutter button is pressed halfway: ] mode, [ ] mode –– [ –– [4K Burst(S/S)] –– In low light situations • [AFF] is not available when recording 4K photos. Continuous AF works during recording. • This function is not available for Post-Focus recording.
6. Focus/Zoom Using AF AF (Auto Focus) refers to automatic focusing. Select the focus mode and the AF mode appropriate for the subject and scene. 1 2 Set the Focus Mode. (126) ●● [ ]/[ ] [Focus Mode] [AFS]/[AFF]/[AFC] Select AF mode. ●●Press [ ] ( ) to display the AF mode selection screen, and set using . (131) • In [ ]/[ ] mode, each press of [ ] ] and [ ]. ( ) switches between [ (80) 3 Press the shutter button halfway. ●●The AF operates.
6. Focus/Zoom Low illumination AF • In dark environments, low illumination AF automatically operates, and the focus display is indicated as [ ]. • Achieving focus may take more time than usual. Starlight AF • If the camera detects stars in the night sky after determining low illumination AF, then Starlight AF will be activated. ], and the AF area will be When focus is achieved, the focus display will display [ displayed on the area in focus. • Edges of the screen cannot detect Starlight AF.
6. Focus/Zoom [AF Sensitivity(Photo)] Sets the tracking sensitivity for the movement of subjects. 1 2 Set the focus mode to [AFF] or [AFC]. (126) Set [AF Sensitivity(Photo)]. ●● [ ] [AF Sensitivity(Photo)] + When the distance to the subject changes drastically, the camera re-adjusts the focus immediately. You can bring different subjects into focus one after another.
6. Focus/Zoom Selecting the AF Mode Select the focusing method to match the position and number of subjects. 1 Press [ 2 Select the AF mode. ] ( ). ●●Press to select an item and then press . ●●Selection is also possible by rotating or . etc.
6. Focus/Zoom • When the following functions are being used, [ ] is not available: –– [Clear Nightscape], [Cool Night Sky], [Warm Glowing Nightscape], [Artistic Nightscape], [Glittering Illuminations], [Handheld Night Shot], [Appetizing ] mode) Food], [Cute Dessert] ([ ] is not available: • When the following functions are being used, [ –– [Time Lapse Shot] –– [Live View Composite] ] is not available.
6. Focus/Zoom [Face/Eye Detection] The camera automatically detects the faces and eyes of subjects. When the camera detects a person’s face / , an AF area is displayed. Yellow AF area to be brought into focus. The camera selects this automatically. White Displayed when multiple subjects are detected. • Eye detection works only for the eyes inside the yellow frame . Specify the Eye to Bring into Focus Touch the eye to be used for focusing. • To cancel the settings specified, touch ].
6. Focus/Zoom Move and Change the Size of the Yellow AF Area Press [ ]( Select [ ] and then press ) to display the AF mode selection screen. . Press the AF area. to move the position of Rotate or the AF area. to change the size of Press . • On the recording screen, press , or ] to cancel the AF area setting. touch [ Operations on the AF area movement screen Button operation Touch operation Touch Pinch out/ pinch in — [DISP.] 134 [Reset] Description of operation Moves the AF area.
6. Focus/Zoom [Tracking] The AF area follows the movement of the subject, maintaining focusing. Start tracking. ●●Aim the AF area over the subject, and press the shutter button halfway. • When the subject is recognized, the AF tracking area turns green. When you release the shutter button, the AF tracking area turns yellow and the subject is automatically kept in focus. • The same operation can be performed by touching the subject. • To release AF Tracking ] or press .
6. Focus/Zoom Move the Position of the AF Area Press [ ]( Select [ ] and then press Press ) to display the AF mode selection screen. . to move the position of the AF area. • You can also move the AF area by touching. • To return the position back to the center, press [DISP.]. Press 136 .
6. Focus/Zoom [49-Area] The camera selects the most optimal AF area to focus from 49 areas. When multiple AF areas are selected, all selected AF areas will be brought into focus. Move and Change the Size of the AF Area You can set the focus position by selecting an AF area group. The AF area, which is configured with 49 points, is divided into groups consisting of 9 points each (6 points or 4 points for the groups located at the edges of the screen). Press [ screen.
6. Focus/Zoom / / Custom Multi (Horizontal, Vertical, Center) [Horizontal Pattern] Ideal shape for panning, etc. [Vertical Pattern] Ideal shape for recording structures, etc. [Central Pattern] Within the 49 AF areas, a central oval zone can be focused.
6. Focus/Zoom Move and Change the Size of the AF Area Press [ ]( ) to display the AF mode selection screen. Select a Custom Multi icon ([ Select [ press . ], [ Press the AF area. ] or [ ], etc.), and press . ] and then to move the position of • You can also move the AF area by touching. Rotate or to change the size of the AF area. • You can also pinch out/pinch in the AF area to change the size. • The first press of [DISP.] returns the AF area position to the center.
6. Focus/Zoom Custom Multi (C1 to C3) The shape of the AF area can be set freely in the 49 AF areas. The set AF area can be registered using [ ] to [ ]. Press [ ]( ) to display the AF mode selection screen. Select a Custom Multi icon ([ Select one of [ press . ] to [ ] etc.), and press . ] and then Select the AF area. ●●Touch operation Touch the area to make the AF area. • To select consecutive points, drag the screen. • To cancel selection of the selected AF area, touch it again.
6. Focus/Zoom [1-Area] Specify the point to be brought into focus. Move and Change the Size of the AF Area Press [ ]( Select [ ] and then press ) to display the AF mode selection screen. . Press the AF area. to move the position of Rotate or the AF area. to change the size of Press . • Refer to “Operations on the AF area movement screen” on page 134 for information about detailed operations to move the AF area.
6. Focus/Zoom [Pinpoint] You can achieve a more precise focus on a small point. If you press the shutter button halfway, the screen that lets you check the focus will be enlarged. Move the Position of the AF Area Press [ ]( Select [ ) to display the AF mode selection screen. ] and then press Press . to set the position of [+] and then press • The selected position on the screen will be enlarged. • The AF area cannot be moved to the edge of the screen. Press position of [+]. Press 142 .
6. Focus/Zoom Operations on the Magnification Window Button operation Touch operation Touch Pinch out/ pinch in — Description of operation Moves [+]. Enlarges/reduces the screen in small steps. Enlarges/reduces the screen. Switches magnification window (windowed mode/full screen mode). — [DISP.] [Reset] First time: Returns to the screen in Step . Second time: Returns the AF area position to the center. • When the picture is displayed in windowed mode, you can enlarge the picture by approx.
6. Focus/Zoom Moving the AF Area by Touch You can move the AF area to a touched position on the monitor. Optimizing the focus and brightness to the touched position Set [Touch AF]. ●● [ ] [Touch AF] [AF] [AF+AE] [ ] [Touch Settings] This focuses on the touched subject. This focuses on and adjusts brightness for the touched subject. • The default setting is [AF]. Focus on the Touched Position ([AF]) Touch the subject. • The AF area moves to the touched position.
6. Focus/Zoom Focus on and Adjust Brightness for the Touched Position ([AF+AE]) Touch the subject to which you wish to adjust the brightness. • At the touched position, an AF area ] is that works in the same way as [ displayed. This places a point to adjust brightness at the center of the AF area. ], which is • [Metering Mode] is set to [ used exclusively for the [Touch AE]. Set Reset Pinch out/pinch in to change the AF area size.
6. Focus/Zoom Moving the AF Area during Viewfinder Display During viewfinder display, you can touch the monitor to change the position and size of the AF area. 1 Set [Touch Pad AF]. ●● [ ] [ ] [Touch Settings] [Touch Pad AF] [EXACT]/ [OFFSET1] to [OFFSET7] 2 Move the position of the AF area. ●●During viewfinder display, touch the monitor. 3 Change the size of the AF area. ●●Rotate or . • The first press of [DISP.] returns the AF area position to the center.
6. Focus/Zoom Setting Items ([Touch Pad AF]) [EXACT] [OFFSET1] to [OFFSET7] [OFF] Moves the AF area of the viewfinder by touching a desired position on the touch pad. Moves the AF area of the viewfinder according to the distance you drag your finger on the touch pad. Select the range to be detected with the drag operation.
6. Focus/Zoom Record Using Manual Focus MF (Manual Focus) refers to manual focusing. Use this function when you want to fix the focus or when the distance between the lens and the subject is determined and you do not want to activate AF. 1 Set the Focus Mode. ●● [ ] [Focus Mode] [MF] ●●Press the shutter button halfway to return to the recording screen. 2 Press [ 3 Select the focus point. ●●Press ] ( ). to select the focus point.
6. Focus/Zoom 4 Confirm your selection. ●●Press . ●●This switches to the MF Assist screen, and shows an enlarged display. 5 Adjust the focus. The operations used to focus differ depending on the lens. When using an interchangeable lens with no focus ring Press : Focuses on nearby subject : Focuses on distant subject Press Slide bar • Pressing and holding will increase the focus speed. • Focus can also be adjusted by dragging the slide bar.
6. Focus/Zoom • This will display the in-focus portion highlighted with color. (Focus Peaking) • A recording distance guideline is displayed. (MF Guide) MF Assist (enlarged screen) Focus Peaking MF Guide 6 Close the MF Assist screen. ●●Press the shutter button halfway. ●●This operation can also be performed by pressing 7 . Start recording. ●●Press the shutter button fully.
6. Focus/Zoom Operations on the MF Assist Screen Button operation *1 Touch operation Drag Pinch out/ pinch in — Description of operation Moves the enlarged display position. Enlarges/reduces the screen in small steps. Enlarges/reduces the screen. Switches magnification window (windowed mode/full screen mode)*3. — [DISP.]*1 *2 [Reset]*1 — First time: Returns the MF Assist position to the center. Second time: Returns the MF Assist magnification to the default setting. The AF operates.
6. Focus/Zoom • On the recording screen, you can rotate the focus ring to display the MF Assist screen. If the focus ring has been rotated to enlarge the display, the assist screen will be exited a certain amount of time after you cease the operation. • The recording distance reference mark is a mark used to measure the recording distance. Use this when taking pictures with manual focusing or taking close-up pictures.
6. Focus/Zoom Recording with Zoom Use the optical zoom of the lens to zoom to telephoto or wide-angle. : Telephoto, Enlarges distant subject : Wide-angle, Widens angle of view Rotate the zoom ring. Interchangeable lens with a zoom ring Interchangeable lens that supports the power zoom (electrically operated zoom) Move the zoom lever. (The zoom speed varies depending on how far you move the lever.) • If you set [Zoom Control] to an Fn button, you can operate the optical zoom or slowly by pressing .
6. Focus/Zoom Extended Tele Conversion [Ex. Tele Conv.] enables you to take pictures that are further enlarged beyond what is available with the optical zoom, without any deterioration in image quality. [Ex. Tele Conv.] ([Rec]) • The [Ex. Tele Conv.] maximum magnification ratio differs depending on the [Picture Size] and [Aspect Ratio] set in the [Rec] menu. M]: up to 1.4x –– When the setting is set to [ S]: up to 2.0x –– When the setting is set to [ Set [Picture Size] to [M] or [S].
6. Focus/Zoom Changing the Zoom Magnification (Button operation) Set [Ex. Tele Conv.] to [ZOOM]. • [ ] [Ex. Tele Conv.] [ZOOM] Set the Fn button to [Zoom Control]. (294) Press the Fn button. Press the cursor buttons to operate the zoom. : T (telephoto) : W (wide-angle) • Press the Fn button again, or wait a specified time to end zoom operation. EX2.0x Zoom magnifications Changing the Zoom Magnification (Touch operation) Set [Ex. Tele Conv.] to [ZOOM]. • [ ] Touch [ ]. Touch [ ]. [Ex.
6. Focus/Zoom [Ex. Tele Conv.] ([Motion Picture]) Set [Rec Quality] to [FHD] or [HD]. • [ ] [Rec Quality] [FHD]/[HD] Set [Ex. Tele Conv.]. • [ [ON] [OFF] ] [Ex. Tele Conv.] Fixes the zoom magnification at the maximum. — • If you assign [Ex. Tele Conv.] to [Fn Button Set] in the [Custom] ([Operation]) menu, you can display the Extended Tele Conversion setting screen for both pictures and video by pressing the assigned Fn button.
6. Focus/Zoom [Digital Zoom] (DC-G100 only) You can increase the zoom ratio 2x higher than the original zoom ratio. Note that, with Digital Zoom, enlarging will decrease picture quality. [ ]/[ ] Select [Digital Zoom] Settings: [2x]/[OFF] • When using [Digital Zoom], we recommend using a tripod and the self-timer (186) for taking pictures. • When the following functions are being used, [Digital Zoom] is not available.
6. Focus/Zoom Power Zoom Lens Sets the screen display and operations when using an interchangeable lens that is compatible with power zoom (electrically operated zoom). • This may only be selected when using a lens that is compatible with power zoom (electrically operated zoom). [ ] [ [Disp Focal Length] ] Select [Power Zoom Lens] Displays the focal length on the recording screen during zoom control.
7. Drive/Shutter/Image Stabilizer Selecting the Drive Mode You can switch the drive mode to Single, Burst, etc. to match the recording conditions. 1 Press [ 2 Select the drive mode. ] ( ). ●●Press to select the drive mode . and press • You can also select by rotating . [Single] Takes one picture each time the shutter button is pressed. [Burst] (160) Takes pictures continuously while the shutter button is pressed and held.
7. Drive/Shutter/Image Stabilizer Taking Burst Pictures Takes pictures continuously while the shutter button is pressed and held. 1 Press [ 2 Press press . ] ( ). to select [Burst] and • You can also select by rotating 3 . Select the burst rate. ●●Press to select the burst rate and press . Settings: [H] (High speed)/ [M] (Middle speed)/ [L] (Low speed) • You can also select by rotating or • The burst rate can also be set using [Burst Rate] in the [Rec] menu. 4 Start recording.
7.
7. Drive/Shutter/Image Stabilizer Number of Pictures That Can Be Taken Continuously When you press the shutter button halfway, the number of pictures that can be taken continuously will appear on the recording screen. Example) When 20 frames: [r20] • Once recording starts, the number of pictures that can be taken continuously will decrease. When [r0] appears, the burst rate decreases. • When [r99+] is displayed on the recording screen, you can take 100 or more burst pictures.
7. Drive/Shutter/Image Stabilizer Exposure when Taking Burst Pictures Focus mode [H] [AFS] Fixed to the exposure of the first frame [M]/[L] [AFF]/[AFC] The exposure is adjusted for each frame [MF] Fixed to the exposure of the first frame The exposure is adjusted for each frame How to Cancel [Burst] Press [ ]( ), and then select [ ] ([Single]) or [ ]. • It may take a while to save burst pictures.
7. Drive/Shutter/Image Stabilizer 4K Photo Recording With 4K photo, you can take high-speed burst pictures at 30 frames/ second and save the desired pictures, each made up of approx. 8 million pixels. • Use a UHS Speed Class 3 or higher card when recording. • The angle of view becomes narrower. • When the recording time of a single session exceeds 10 minutes, recording stops. ] may be displayed and recording may • If the camera temperature rises, [ stop. Wait until the camera cools down.
7. Drive/Shutter/Image Stabilizer 3 Select [Rec Method]. ●●Press to select the recording method and press . • You can also select by rotating or • The recording method can also be set using [4K PHOTO] in the [Rec] menu. ([4K Burst]) . When you wish to capture the best moments of a fast-moving subject Takes burst pictures while the shutter button is pressed. Audio recording: None ([4K Burst(S/S)]) “S/S” is an abbreviation for start/ stop.
7. Drive/Shutter/Image Stabilizer 4 Start recording. • [Continuous AF] works and the focus is adjusted continuously during recording with AF. [4K Burst] 1 Press the shutter button halfway. 2 Press the shutter button fully and keep it pressed during recording. Press and hold Recording is performed • Press the shutter button fully early because recording will take approx. 0.5 seconds to start after it is pressed fully. [4K Burst(S/S)] 1 Press the shutter button fully to start recording.
7. Drive/Shutter/Image Stabilizer [4K Pre-Burst] Press the shutter button fully. Approx. 1 second Recording is performed • While the recording screen is displayed, the AF will operate constantly to continue focusing. The exposure is also adjusted continuously, except in [ ] mode. • When the subject is not at the center, use AF/AE Lock if you wish to lock the focus and exposure.
7. Drive/Shutter/Image Stabilizer How To cancel the 4K Photo functions Press [ ]( ), and then select [ ] ([Single]) or [ ]. • When you perform [Light Composition] or [Sequence Composition], we recommend using a tripod or the shutter remote control function (391). • Taking pictures of yourself (4K Selfie) You can switch to 4K Photo Mode and take pictures of yourself. (89) In Self Shot Mode, you can take pictures with [4K Burst (Wide-angle)], a setting that allows you to include a wider background.
7.
7. Drive/Shutter/Image Stabilizer Selecting Pictures from a 4K Burst File You can select pictures from the 4K burst files and save them. • When continuing to select pictures from the Auto Review after recording 4K photos, start the operation from either Step 2 or 3. 1 Select a 4K burst file on the playback screen. (272) ●●Select an image with the [ ] icon and then press . ●●You can also perform the same operation by touching [ ]. • If the images were recorded with [4K PreBurst], proceed to Step 3.
7. Drive/Shutter/Image Stabilizer 4 Save the picture. ●●Touch [ ]. ●●A confirmation screen appears. • The picture is saved in JPEG format. • The recording information (Exif information), such as the shutter speed, aperture, and ISO sensitivity, is also saved with the picture that is saved.
7. Drive/Shutter/Image Stabilizer Picture Selection Operations Picture Selection Slide View Screen Operations Slide bar Picture selection slide view Position of displayed frame Button operation / Press and hold — — 172 Touch operation Drag/ Touch and hold Touch/drag Pinch out/ pinch in Description of operation Selects a frame. • To change the frames displayed in the picture selection slide view, select the frame at the left/ right end and then touch [ ] or [ ].
7. Drive/Shutter/Image Stabilizer Drag Switches a marker to be displayed. — Displays the 4K burst playback screen. [Fn1] — — Moves the enlarged display position (during enlarged display). Switches to marker operation. / Adds or deletes a marker (white marker). Displays the in-focus portion highlighted with color ([Peaking]). ]→[ ] • Switches in order of [ ] ([HIGH]). ([LOW]) → [ — Saves the picture.
7. Drive/Shutter/Image Stabilizer 4K burst playback screen While paused Button operation Touch operation Description of operation / Performs continuous playback or pauses (during continuous playback). / Performs continuous rewind playback or pauses (during continuous rewind playback). / / Performs fast-forward playback or performs frame-by-frame forwarding (while paused). / / Performs fast-rewind playback or performs frame-by-frame rewinding (while paused).
7. Drive/Shutter/Image Stabilizer — / Adds or deletes a marker (white marker). Displays the in-focus portion highlighted with color ([Peaking]). ]→ • Switches in order of [ ] ([LOW]) → [ ] ([HIGH]). [ — Saves the picture (while paused). • During marker operation, you can skip to set markers or the beginning or end of the ] to return to the previous operation. 4K burst file. Touch [ Button operation Touch operation Description of operation — Moves to the next marker.
7. Drive/Shutter/Image Stabilizer Auto Marking function The camera automatically sets markers on scenes in which a face or the movement of a subject is detected. (Green marker) (Example: At the scene when a vehicle passes by, a balloon bursts, or a person turns around) • Up to 10 markers are displayed for each file. Markers set manually Markers set by the Auto Marking function Switches a marker to be displayed Touch [ ] on the slide view screen, 4K burst playback screen, or marker operation screen.
7. Drive/Shutter/Image Stabilizer [4K PHOTO Bulk Saving] You can save any 5 second period of pictures from a 4K burst file all at once. Select [4K PHOTO Bulk Saving]. • Press [ ] [4K PHOTO Bulk Saving] to select a 4K burst file and then press . • If the burst time is 5 seconds or less, all frames are saved as pictures. Select the first frame of the pictures to be saved all at once and then press . • The pictures are saved as a group of burst pictures in JPEG format.
7. Drive/Shutter/Image Stabilizer Post-Focus Recording Taking burst pictures with the same image quality as 4K photos while automatically changing the focus point. You can select the focus point for the picture to save after recording. Also Focus Stacking lets you combine images with multiple focus points. This function is suitable for subjects that do not move. Perform burst 4K photo recording while automatically shifting the focus. Touch the desired focus point.
7. Drive/Shutter/Image Stabilizer 2 Press to select [Post Focus] and press . • You can also select by rotating 3 . Decide on the composition and then adjust the focus. ●●Press the shutter button halfway. ●●AF detects the focus point on the screen. (Excluding the edges of the screen) • If no areas on the screen can be brought blinks into focus, the focus indication and recording is not possible. • Maintain the same distance to the subject and the same composition until recording finishes.
7. Drive/Shutter/Image Stabilizer • Recording is performed while automatically changing the focus point. disappears, recording When the icon ends automatically. • Audio will not be recorded. • In default settings, Auto Review operates, and a screen that lets you select the focus point will be displayed. (181) How To Cancel [Post Focus] Press [ ]( ), and then select [ ] ([Single]) or [ ].
7. Drive/Shutter/Image Stabilizer Selecting the Focus Point for the Picture to Save 1 Select a Post-Focus image on the playback screen. (272) ●●Select an image with the [ ] icon and then press . ●●You can also perform the same operation by touching the [ ] icon. 2 Touch the focus point. • When the point is in focus, a green frame appears. • If there is no picture with the selected point in focus, a red frame appears. A picture cannot be saved. • The edge of the screen cannot be selected.
7. Drive/Shutter/Image Stabilizer Focus Point Selection Operations Button operation / Touch operation Touch Description of operation Selects a focus position. • Selection is not possible during enlarged display. Enlarges the display. • During enlarged display, you can fine-adjust the focus by dragging the slide bar. (You can also perform the same operation .) by pressing Reduces the display (during enlarged display). [Fn1] Switches to Focus Stacking operation.
7. Drive/Shutter/Image Stabilizer Focus Stacking By merging multiple focus points, you can save pictures that are focused from the foreground through to the background. Focus Focus: closer Focus: more distant 1 On the screen for selecting the focus point in Step 2 on page 181, touch [ ]. ●●You can also perform the same operation by pressing [Fn1]. 2 Select the merging method. [Auto Merging] Automatically selects pictures suitable for merging and then merges them into a single picture.
7. Drive/Shutter/Image Stabilizer 3 (When [Range Merging] is selected) Set/Cancel Touch the focus points. • Select at least two points. Selected points are indicated with a green frame. • The in-focus range between the two selected points is displayed in green. • Ranges that cannot be selected are displayed in gray. • To cancel the selection, touch a point with a green frame again. • To select consecutive points, drag the screen. 4 Reset Set/Cancel Save the picture. ●●Touch [ 184 ].
7. Drive/Shutter/Image Stabilizer Operations when [Range Merging] Is Selected Button operation Touch operation / / [Fn1] Touch Description of operation Selects a point. [Set/Cancel] Sets or cancels a point. [All] Selects all points. (Before selecting points) [DISP.] [Reset] Cancels all selections. (After selecting points) Merges the pictures and saves the resulting picture.
7. Drive/Shutter/Image Stabilizer Recording Using the Self-timer 1 Press [ 2 Press to select [Self Timer] and press . ] ( ). • You can also select by rotating 3 . Set the Self-Timer time. ●●Press to select the Self-Timer time and press . • You can also select by rotating or . • It can also be set using [Self Timer] in the [Rec] or [Motion Picture] menu. 4 Decide on the composition and then adjust the focus. ●●Press the shutter button halfway.
7. Drive/Shutter/Image Stabilizer 5 Start recording. ●●Press the shutter button rec. button or video . • The self-timer light blinks and then the shutter is released. Setting item (Self-timer) Takes a picture after 10 seconds. Takes 3 pictures at approx. 2 second intervals after 10 seconds. ].) (When recording video, it will be the same operation with [ Takes a picture after 2 seconds. • This setting is a convenient way to avoid camera shake caused by pressing the shutter button. etc.
7. Drive/Shutter/Image Stabilizer How To Cancel [Self Timer] Press [ ]( ), and then select [ ] ([Single]) or [ ]. • We recommend using a tripod when recording with the self-timer. • When the following functions are being used, [ ] is not available: –– [Simultaneous Record w/o Filter] (113, 227) –– [Bracket] –– [Multi Exp.
7. Drive/Shutter/Image Stabilizer Recording with Time Lapse Shot Pictures are taken automatically at a set recording interval. This feature is ideal for keeping track of changes over time in subjects such as animals and plants. The pictures taken will be saved as a set of group images that can also be combined into a video. • Check that the clock is set correctly. (47) • For long recording intervals, we recommend setting [Lens Position Resume] to [ON] in the [Custom] ([Lens / Others]) menu.
7. Drive/Shutter/Image Stabilizer 3 Press press 4 Focus on the subject and take a picture. to select [Start] and . • The recording starts by fully-pressing the shutter button. • When [Start Time Set] is set, the camera will enter into sleep status until the start time is reached. • During recording standby, the camera enters into sleep status when no operation is performed for a certain period of time. • The recording will stop automatically. 5 Create a video.
7. Drive/Shutter/Image Stabilizer Operations during Time Lapse Shot Recording Pressing the shutter button halfway during sleep status will turn on the camera. • You can perform the following operations by pressing [Fn2] during Time Lapse Shot recording. [Continue] [Pause] [Resume] [End] Returns to the recording. (Only during recording) Pauses the recording. (Only during recording) Resumes the recording. (Only while paused) • You can also press the shutter button to resume.
7. Drive/Shutter/Image Stabilizer Recording with Stop Motion Animation Take pictures while moving the subject little by little. The pictures taken will be saved as a set of group images that can be combined into a stop motion video. 1 Set the camera to [Stop Motion Animation]. ●● [ ] Animation] 2 [Stop Motion Set the recording settings. [ON] Takes pictures automatically at a set recording interval. [OFF] This is for taking pictures manually, frame by frame.
7. Drive/Shutter/Image Stabilizer 5 Focus on the subject and take a picture. ●●Take pictures repeatedly while moving the subject little by little. • The recording screen displays up to two pictures taken previously. Use them as reference for the amount of movement. • You can play back the recorded stop motion images by pressing [ ] during recording. Press [ ] to delete unnecessary images. To return to the recording screen, press [ ] again. 6 Stop recording.
7. Drive/Shutter/Image Stabilizer • When you select [Additional] in step 4, group pictures recorded using [Stop Motion Animation] are displayed. Select an image and proceed to Step 5. • Up to 9999 frames can be recorded. • If the camera is turned off while recording, a message for resuming the recording is displayed when it is turned on. Selecting [Yes] allows you to continue the recording from the interruption point.
7. Drive/Shutter/Image Stabilizer Time Lapse Shot/Stop Motion Animation Videos After performing Time Lapse Shot or Stop Motion Animation recording, you can proceed to create a video. • Refer to the sections below about these recording functions. –– Time Lapse Shot recording: 189 –– Stop Motion Animation recording: 192 • You can also create videos with [Time Lapse Video] (370) or [Stop Motion Video] (370) in the [Playback] menu. 1 Select [Yes] on the confirmation screen that appears after recording.
7. Drive/Shutter/Image Stabilizer • Videos cannot be created if the recording time exceeds 29 minutes and 59 seconds.
7. Drive/Shutter/Image Stabilizer Bracket Recording When the shutter button is pressed, the camera can record multiple images while automatically changing the setting value for exposure, aperture, focus or white balance. • Aperture Bracket can be selected in the following modes: –– [ ] mode –– [ ] mode (when ISO sensitivity is set to [AUTO]) 1 Set [Bracket Type]. ●● [ ] [Bracket] [Bracket Type] 2 Set [More Settings].
7. Drive/Shutter/Image Stabilizer Setting Items ([Bracket Type]) Exposure Bracket When the shutter button is pressed, the camera records while changing the exposure. (200) Aperture Bracket When the shutter button is pressed, the camera records while changing the aperture value. (200) Focus Bracket When the shutter button is pressed, the camera records while changing the focus point.
7. Drive/Shutter/Image Stabilizer • Bracket recording is not available while you are using the following functions: –– Self Shot Mode –– [Glistening Water], [Glittering Illuminations], [Handheld Night Shot], [Soft ] mode) Image of a Flower] ([ –– [Rough Monochrome], [Silky Monochrome], [Miniature Effect], [Soft ] mode) Focus], [Star Filter], [Sunshine] ([ –– [4K PHOTO], [Post Focus] –– [Time Lapse Shot] –– [Stop Motion Animation] (when [Auto Shooting] is set) –– [Live View Composite] –– [Multi Exp.
7. Drive/Shutter/Image Stabilizer [More Settings] (Exposure Bracket) Sets the image count and exposure compensation step. [3•1/3] (record 3 images in 1/3 EV steps) to [7•1] (record 7 images in 1 EV steps) [Step] [Sequence] Sets the order in which images are recorded. [Single Shot Setting] ]: Takes only one image each time the shutter button is [ pressed. ]: Takes all of the set number of images when the shutter [ button is pressed once.
7. Drive/Shutter/Image Stabilizer [More Settings] (Focus Bracket) [Step] Sets the focus adjustment step. • The distance that the focus point is moved becomes shorter if the initial focus point is close, and longer if it is far away. [Image Count] Sets the image count. • This cannot be set when taking burst pictures. Burst pictures are taken while the shutter button is pressed.
7. Drive/Shutter/Image Stabilizer [More Settings] (White Balance Bracket) Rotate or to set the correction step and then press . Horizontal direction: [A] - [B] Vertical direction: [G] - [M] • The correction step can also be set by ]/[ ]/[ ]/[ ].
7. Drive/Shutter/Image Stabilizer [Silent Mode] This disables all operation sounds and light output at once. The audio from the speaker will be muted and the flash and the AF assist light will be set to forced off mode. • The following settings are fixed: ] (Forced Flash Off) –– [Flash Mode]: [ –– [AF Assist Lamp]: [OFF] –– [Shutter Type]: [ESHTR] –– [Beep Volume]: [ ] (Off) ] (Off) –– [Shutter Vol.
7. Drive/Shutter/Image Stabilizer [Shutter Type] Selects the shutter type to use for taking pictures. [ ] Select [Shutter Type] [AUTO] [EFC] [ESHTR] Switches the shutter type automatically depending on the recording conditions and shutter speed. Records with the electronic front curtain type. Records with the electronic shutter type. Electronic front curtain type Mechanism This type starts exposure electronically and ends it with the mechanical shutter.
7. Drive/Shutter/Image Stabilizer • When [ ] is displayed on the screen, recording will be with the electronic shutter type. • When a moving subject is recorded using the electronic shutter, the subject may appear distorted in the picture. • When you record using the electronic shutter under lighting such as fluorescent or LED lighting, horizontal stripes may be recorded. In such a case, lowering the shutter speed may reduce the effect of horizontal stripes.
7. Drive/Shutter/Image Stabilizer Image Stabilizer The camera detects jitter during recording and automatically corrects it, so you can record images with reduced jitter. • When using a lens with an O.I.S. switch, set the switch on the lens to ON. • When you use a lens with no connection function with the camera, [Stabilizer] cannot be selected. • When you use a lens without the stabilizer function, [Operation Mode] cannot be selected.
7. Drive/Shutter/Image Stabilizer Image Stabilizer Settings Set the image stabilizer operation to match the recording situation. [ ]/[ [Operation Mode] ] Select [Stabilizer] Sets the stabilization movement (blur) to match the recording method (normal, panning). (208) [HIGH] This will stabilize strong jitter. (Since the stabilizing width is large, the angle of view is narrowed.) ] is displayed on the screen during video • [ recording. [STANDARD] This will stabilize jitter.
7. Drive/Shutter/Image Stabilizer • When the shutter button is pressed halfway, the camera shake alert icon ] may be displayed on the recording screen. [ If this is displayed, we recommend using a tripod, the self timer or the shutter remote control function (391). • We recommend turning off the image stabilizer function when using a tripod.
8. Brightness (Exposure)/ Coloring/Picture effect [Metering Mode] Type of optical measurement to measure brightness can be changed. [ ]/[ ] Select [Metering Mode] Multi-metering Method in which the most suitable exposure is measured by judging the allocation of brightness on the whole screen. Center-weighted Method used to perform measuring which focuses on the center of the screen. Spot Method used to measure the extremely small part around the spotmetering target .
8. Brightness (Exposure)/Coloring/Picture effect Exposure Compensation You can compensate the exposure when the correct exposure determined by the camera is too bright or too dark. You can adjust the exposure in 1/3 EV steps in a range of ±5 EV. When recording videos or recording with 4K photo or Post-Focus, the range changes to ±3 EV. 1 Press [ 2 Compensate the exposure. 3 ●●Rotate ]. or . Confirm your selection. ●●Press the shutter button halfway.
8. Brightness (Exposure)/Coloring/Picture effect • In [ ] mode, you can compensate the exposure by setting the ISO sensitivity to [AUTO]. • When the exposure compensation value falls below or exceeds ±3 EV, the brightness of the recording screen will no longer change. Press the shutter button halfway or use AE Lock to reflect the value on the recording screen. • The set exposure compensation value is stored even if you turn off the camera.
8. Brightness (Exposure)/Coloring/Picture effect Locking Focus and Exposure (AF/AE Lock) Lock the focus and exposure in advance to take pictures with the same focus and exposure settings while changing the composition. This is useful when you want to bring an edge of the screen into focus or there is a backlight, for example. 1 Register [AF/AE LOCK] to the Fn button. (294) 2 Lock focus and exposure. • These cannot be registered to [Fn5] to [Fn9]. ●●Press and hold the Fn button.
8. Brightness (Exposure)/Coloring/Picture effect Setting the function of [AF/AE LOCK] [ ] [ ] Select [AF/AE Lock] [AE LOCK] The exposure is locked. [AF LOCK] The focus is locked. [AF/AE LOCK] [AF-ON] Both focus and exposure are locked. Auto Focus is activated. • Program Shift can be set even when AE is locked.
8. Brightness (Exposure)/Coloring/Picture effect ISO Sensitivity You can set light sensitivity (ISO sensitivity). With the default settings, you can set 200 to 25600 in 1/3 EV increments. 1 Press [ 2 Select ISO sensitivity. ●●Rotate ] ( ). or . 200 3 40 Confirm your selection. ●●Press the shutter button halfway. Characteristics of the ISO Sensitivity By increasing the ISO sensitivity, the shutter speed can be increased in dark places to prevent camera shake and subject blur.
8. Brightness (Exposure)/Coloring/Picture effect Setting Items (ISO Sensitivity) [AUTO] (Intelligent ISO) [200] to [25600] ISO sensitivity is automatically set in a range up to 3200 depending on the brightness of a subject. ISO sensitivity is automatically set in a range up to 3200 depending on the movement and brightness of a subject. • The shutter speed is not fixed when the shutter button is pressed halfway.
8. Brightness (Exposure)/Coloring/Picture effect • During video recording, the camera operates as [AUTO] (for video). (When ]/[ ] mode) not in [ • You can set upper and lower limits for ISO Auto: ] [ISO Sensitivity (photo)] (321) [ ] [ISO Sensitivity (video)] (264) [ • You can set the lower limit for shutter speed for ISO Auto: ] [Min.
8. Brightness (Exposure)/Coloring/Picture effect White Balance (WB) White balance (WB) is a function that corrects the color cast produced by the light illuminating the subject. It corrects the colors so that white objects appear in white to make the overall color closer to what is seen by the eye. Normally, you can use auto ([AWB], [AWBc] or [AWBw]) to obtain the optimal white balance.
8. Brightness (Exposure)/Coloring/Picture effect 3 Confirm your selection. ●●Press the shutter button halfway.
8. Brightness (Exposure)/Coloring/Picture effect 1 2 3 4 5 6 7 8 9 [AWB] will work within this range. Blue sky Cloudy sky (Rain) Shade Sunlight White fluorescent light Incandescent light bulb Sunrise and sunset Candlelight K=Kelvin Color Temperature • Under lighting such as fluorescent or LED lighting, the appropriate white balance will vary depending on the lighting type. ] to [ ]. Use [AWB], [AWBc], [AWBw] or [ • The white balance is fixed to [AWB] while [Filter Settings] is being used.
8. Brightness (Exposure)/Coloring/Picture effect Registering the White Set ([ ] to [ ]) Take pictures of a white object under the light source of the recording location to adjust the white balance until it appears white. Press [ Press ]( ) and then select any value from [ ] to [ ]. . Aim the camera at a white object so that it appears inside the frame at the center of the screen and then press . • This will set the white balance and return you to the recording screen.
8. Brightness (Exposure)/Coloring/Picture effect Adjusting the White Balance You can adjust the coloring even when the coloring you want to apply is not produced by the selected white balance. 1 Press [ 2 Select the white balance and then press 3 Adjust the coloring. ] ( ). . ●●The adjustment screen is displayed. : [A] (AMBER: ORANGE) : [G] (GREEN: GREENISH) : [B] (BLUE: BLUISH) : [M] (MAGENTA: REDDISH) • You can also touch the graph to make adjustments. • Press [DISP.
8. Brightness (Exposure)/Coloring/Picture effect 4 Confirm your selection. ●●Press the shutter button halfway. • When the white balance is adjusted, the color of its recording screen icon changes to the adjusted color. Adjusting toward the [G] side will display [+], while adjusting toward the [M] side will display [–].
8. Brightness (Exposure)/Coloring/Picture effect [Photo Style] You can select the finishing settings of images to suit your subjects and expression styles. The image quality can be adjusted for each Photo Style. [ ]/[ ] Select [Photo Style] [Standard] The standard setting. [Vivid] A setting that produces a more vivid quality with higher saturation and contrast. [Natural] A setting that produces a softer quality with lower contrast. [Monochrome] A monochrome setting with no color shades. [L.
8. Brightness (Exposure)/Coloring/Picture effect • In [ ] mode, operation differs from that in other recording modes. –– [Standard] or [Monochrome] can be set. –– The setting will be reset to [Standard] when the camera is switched to another recording mode or it is turned off. –– Image quality cannot be adjusted. ] mode. • Only picture quality adjustment can be set in [ • When [Filter Settings] is being used, [Photo Style] is not available.
8. Brightness (Exposure)/Coloring/Picture effect [Filter Effect]*3 [Grain Effect]*3 [Yellow] Enhances the contrast. (Effect: weak) Records the sky with a clear blue. [Orange] Enhances the contrast. (Effect: medium) Records the sky with a darker blue. [Red] Enhances the contrast. (Effect: strong) Records the sky with a much darker blue. [Green] Skin and lips of people appear in natural tones. Green leaves appear brighter and more enhanced.
8. Brightness (Exposure)/Coloring/Picture effect [Filter Settings] This mode records with additional image effects (filters) just like in the [ ] mode. (113) You can adjust the effect for each filter. In addition, you can simultaneously take pictures without effects. [ ]/[ ] [Filter Settings] Select [Filter Effect] Settings: [ON]/[OFF]/[SET] Setting a Filter with Touch Operation Touch [ ]. Touch the item to set.
8. Brightness (Exposure)/Coloring/Picture effect [Simultaneous Record w/o Filter] You can simultaneously take pictures with no added filter effects.
9. Flash Using a Flash Open/Close the built-in flash o open the flash T To close the flash • The flash setting is fixed to [ ] (Forced Flash Off) while the flash is closed. (Except when using an external flash) • Be careful not to catch a finger or any other part of your body or any object when you close the flash. • Forcibly closing the flash can damage the camera. • Be sure to close the built-in flash when not in use. • Do not bring any objects near the flash or block the flash.
9. Flash Setting Flash You can set the flash function to control flash firing from the camera. [Flash Mode] Sets the flash mode. [ Mode] ] [Flash] Forced Flash On Forced On/Red-Eye Select [Flash The flash fires every time regardless of the recording conditions. This is suitable for recording when there is backlighting or under lighting such as fluorescent lighting.
9. Flash • The flash fires twice. ] or The interval between the first and second firings is longer when [ ] is set. The subject should not move until the second firing has [ finished. ] and [ ] cannot be used when the following are set: • [ –– [Flash Synchro]: [2ND] –– [Wireless]: [ON] • Some flash modes may not be available depending on the settings on the external flash. • The effectiveness of red-eye reduction varies from person to person.
9. Flash Available Flash Settings by Recording Mode The available flash settings depend on the recording mode.
9. Flash Shutter Speeds for Flash Modes [Flash Mode] Shutter speed (sec.) 1/50*1 1 to 1/50 *1 In [ ] mode, the shutter speed will be 60 seconds to 1/50 of a second and in [ mode it will be [T] (Time) or 60 seconds to 1/50 of a second. ] • Shutter speeds faster than 1/50 of a second are not available when you fire the flash. ]/[ ] mode, the shutter speed changes depending on the detected • In [ scene.
9. Flash • When taking pictures with flash with the lens hood attached, the lower portion of the photo may turn dark and the control of the flash may be disabled because the photo flash may be obscured by the lens hood. We recommend detaching the lens hood. [Flash Adjust.] Adjusts the flash output if a picture taken using the flash is too bright or too dark. 1 Select [Flash Adjust.]. ●● [ ] Adjust.] 2 [Flash] [Flash Press to adjust the flash output and then press .
9. Flash [Flash Synchro] When a moving subject is recorded at night using a slow shutter and flash, a trail of light may appear in front of the subject. If you set [Flash Synchro] to [2ND], you can take a dynamic picture with a trail of light appearing behind the subject by firing the flash immediately before the shutter closes. [ ] Synchro] [Flash] Select [Flash This is the normal method for recording with the Flash.
9. Flash [Auto Exposure Comp.] Automatically adjust the flash output in conjunction with the exposure compensation value. (210) [ ] [Flash] Select [Auto Exposure Comp.] Settings: [ON]/[OFF] [Red-Eye Removal] When [Flash Mode] is set to [ ] or [ ], the camera automatically detects red-eye and corrects image data. [ ] Select [Red-Eye Removal] Settings: [ON]/[OFF] • When [ON] is set, [ ] is displayed on the flash icon. • Red-eye cannot be corrected depending on its appearance.
9. Flash Recording Using a Wireless Flash You can use a Flash (DMW-FL580L/DMW-FL360L/DMW-FL200L: optional) to record using a wireless flash. You can separately control the firing of three flash groups and the flash attached to the hot shoe of the camera. • The built-in flash does not support wireless flash control. Placing a Wireless Flash Place the wireless flash with its wireless sensor facing the camera.
9. Flash 1 Attach an external flash to the camera. (449) 2 Set the wireless flashes to [RC] mode and then place them. • Set the channel and group for the wireless flashes. 3 Enable the wireless flash function of the camera. ●● 4 [ [ON] ] [Flash] [Wireless] Set [Wireless Channel]. • Select the same channel as on the wireless flash side. 5 Set [Wireless Setup]. • Set the firing mode and flash output.
9. Flash Setting Items ([Wireless Setup]) • To fire a test flash, press [DISP.]. [External Flash] [A Group]/ [B Group]/ [C Group] [Firing Mode] [TTL]: The camera automatically sets the flash output. [AUTO]*1: Sets the flash output on the external flash side. [MANUAL]: Sets the flash output of the external flash manually. [OFF]: The external flash outputs only communication light. [Flash Adjust.] Adjusts the flash output of the external flash manually when [Firing Mode] is set to [TTL].
9. Flash [Communication Light] Set the strength of communication light.
10. Recording Videos Recording Videos 1 Start recording. ●●Press the video rec. button. • Release the video rec. button right after you press it. Red REC frame indicator (348) Recording state indicator Remaining recording time Elapsed recording time 2 Stop recording. ●●Press the video rec. button again. • If maintaining focus on the subject is difficult during video recording with AF, press the shutter button halfway to re-adjust the focus.
10. Recording Videos [Rec Quality] Sets the image quality of videos to be recorded.
10. Recording Videos • Since the camera employs the VBR recording format, the bit rate is changed automatically depending on the subject to record. As a result, video recording time is shortened when a fast-moving subject is recorded. • When the following functions are being used, 4K video cannot be set. ] mode) –– [Miniature Effect] ([ –– HDMI output • To record 4K videos, use a UHS Speed Class 3 card. • When you record 4K videos, the angle of view will be narrower than videos of other sizes.
10. Recording Videos • Even when playback is performed on a supported device, situations may occur where image or sound quality is poor, recording information is not displayed correctly, or playback is not possible, for example. If you experience any of these, play them back on the camera. ] may be displayed and recording may • If the camera temperature rises, [ stop. Wait until the camera cools down.
10. Recording Videos Taking pictures while a video is being recorded Press the shutter button fully during the video recording. • Simultaneous recording indicator is displayed while recording pictures. • Recording with the Touch Shutter function is also available.
10. Recording Videos Setting the video priority or picture priority mode [ ] Select [Picture Mode in Rec.] [Video Priority] [Photo Priority] • Pictures will be recorded with a picture size determined by the [Rec Quality] setting for videos. • Only JPEG images are recorded when [Quality] is set to ], [ ], or [ ]. (When set to [ ], still pictures will [ be recorded in [Quality] of [ ].) • Up to 40 still pictures can be recorded during the recording of a video.
10. Recording Videos Creative Video Mode It is possible to manually change the aperture, shutter speed and ISO sensitivity and record videos. 1 Set the mode dial to [ 2 Set the exposure mode. ]. ●● [ ] [Exposure Mode] [P]/[A]/[S]/[M] • You can perform the same exposure operations as the [ ]/[ ]/[ ]/[ ] modes. • Program Shift does not work. 3 Close the menu. ●●Press the shutter button halfway.
10. Recording Videos 4 Start recording. ●●Press the shutter button rec. button 5 or video . Stop recording. ●●Press the shutter button or video rec. button again. • It is also possible to display the selection screen by touching the recording mode icon in recording screen.
10. Recording Videos Operations During Video Recording Change the exposure and audio settings with touch operation to prevent operation sounds from being recorded. Touch [ ]. Touch an icon. Zoom (When using an interchangeable lens supporting power zoom) Aperture value Shutter speed Drag the slide bar to set the item. [ ]/[ ]: Changes the setting slowly. [ ]/[ ]: Changes the setting quickly. • If you touch icon , the screen of Step is redisplayed.
10. Recording Videos [4K Live Cropping] By cropping a part of the image from the image displayed in the live view, it is possible to record FHD video that incorporates panning and zooming with the camera staying in a fixed position. • A video will be recorded at [FHD/20M/25p] under [MP4]. Pan Zoom in • Use a tripod to minimize camera shake. 1 2 Set the mode dial to [ ]. Set the time for panning or zooming.
10. Recording Videos 3 Set the cropping start frame. ●●Select the range to be cropped and press . Cropping start frame 4 Set the cropping end frame. ●●Select the range to be cropped and press . Cropping end frame • To redo the settings for the position and size of the start frame and the end frame, press . 5 Start recording. ●●Press the shutter button rec. button or video . Elapsed recording time Set operating time • When the set operating time has elapsed, recording automatically ends.
10. Recording Videos Operations for Setting the Cropping Frame Button operation Touch operation / Pinch out/ pinch in [DISP.] [Reset] Touch [Set] Description of operation Moves the frame. Enlarges/reduces the frame. Start frame: Returns the frame position and size to the default settings. End frame: Cancels the settings for the position and size of the frame. Confirms the frame position and size. • The angle of view during recording becomes narrower. ] ([Face/Eye Detection]).
10. Recording Videos Slow & Quick Mode Records slow-motion videos and quick-motion videos. • A video will be recorded at [FHD] under [MP4]. 1 Set the mode dial to [ 2 Set the recording settings. ]. ●● [ ] [S&Q Exposure Mode]/ [S&Q Recording Frame Rate]/ [S&Q Effect] • For details, refer to page 255. 3 Close the menu. ●●Press the shutter button halfway.
10. Recording Videos 4 Start recording. ●●Press the shutter button rec. button 5 or video . Stop recording. ●●Press the shutter button or video rec. button again. • It is also possible to display the selection screen by touching the recording mode icon in recording screen.
10. Recording Videos Operations During Video Recording You can change settings like exposure with touch operation. Touch [ ]. Touch an icon. Zoom (When using an interchangeable lens supporting power zoom) Exposure compensation ISO sensitivity S&Q Effect*1 Aperture value Shutter speed *1 This cannot be operated during recording. Drag the slide bar to set the item. [ ]/[ ]: Changes the setting slowly. [ ]/[ ]: Changes the setting quickly.
10. Recording Videos Slow & Quick Menu [S&Q Exposure Mode] Select the exposure mode. Settings: [P]/[A]/[S]/[M] • You can perform the same exposure operations as the [ • Program Shift does not work. ]/[ ]/[ ]/[ ] modes. [S&Q Recording Frame Rate] Select the recording frame rate.
10. Recording Videos [S&Q Effect] Select the speed effect. [8xQUICK] Records videos sped up to about 8-times speed. Example: When set to [60p]: 8 frames/second. When set to [50p]: 6 frames/second. When set to [30p]: 4 frames/second. When set to [25p]: 3 frames/second. [4xQUICK] Records videos sped up to about 4-times speed. [2xQUICK] Records videos sped up to about 2-times speed. [2xSLOW]*1 Records videos slowed down to about half speed.
10. Recording Videos Snap Movies You can specify the recording time in advance and record videos casually like you take snapshots. The function also allows you to shift a focus at the start of recording and add fade in/out effects in advance. • Video will be recorded with [FHD/20M/25p] in [MP4]. 1 Set the camera to [Snap Movie]. ●● [ ] [Snap Movie] 2 Close the menu. 3 Start recording. [ON] ●●Press the shutter button halfway. ●●Press the video rec. button.
10. Recording Videos Elapsed recording time Set recording time • Immediately release the video rec. button after pressing it. • You cannot stop video recording in the middle. The recording will stop automatically when the set recording time has elapsed. Changing the settings [ ] [Snap Movie] Select [SET] [Record time] Sets the recording time of videos. [Pull Focus] Allows dramatic imaging expression by shifting focus gradually at the start of recording.
10. Recording Videos • Videos recorded with [WHITE-IN] or [BLACK-IN] are displayed as all-white or all-black thumbnails in Playback Mode. • If you assign [Snap Movie] to [Fn Button Set] in [Custom] ([Operation]) menu (295), you can display a screen that lets you switch [Snap Movie] between [ON]/[OFF] by pressing the assigned function button. If you press [DISP.] while the screen is displayed, you can change the settings for Snap Movie.
10. Recording Videos Button operation Press [ ]( Press ) to move the frame, and press • If you press [DISP.] before pressing Repeat step (First position) , the frame will return to the center. (Second position) • To cancel the frame settings, press . • A greater effect can be achieved by creating a striking contrast of focus between the start and end positions, for example by shifting focus from the background to foreground, or vice versa.
10. Recording Videos Video Settings (Auto Focus) This section describes the use of AF when recording videos. • In “6. Focus/Zoom”, the functions described work with both pictures and video. Please also refer to those sections. –– Selecting the Focus Mode: 126 –– Selecting the AF Mode: 131 –– Moving the AF Area by Touch: 144 –– Record Using Manual Focus: 148 –– Recording with Zoom: 153 [Continuous AF] You can select how to set the focus in AF when recording videos.
10. Recording Videos [AF Custom Setting(Video)] You can fine-adjust the focusing method for video recording using [Continuous AF]. [ ] Select [AF Custom Setting(Video)] [ON] Enables the following settings. [OFF] Disables the following settings. [AF Speed] [SET] [AF Sensitivity] 262 [+] side: Focus moves at a faster speed. [–] side: Focus moves at a slower speed. [+] side: When the distance to the subject changes significantly, the camera immediately readjusts the focus.
10. Recording Videos Video Settings (Brightness) This section describes the brightness settings used during video recording. • In “8. Brightness (Exposure)/Coloring/Picture effect”, the functions described work with both pictures and video. Please also refer to those sections.
10. Recording Videos [ISO Sensitivity (video)] Sets the lower and upper limits for ISO sensitivity when ISO sensitivity is set to [AUTO]. [ ] Select [ISO Sensitivity (video)] [ISO Auto Lower Limit Setting] Sets the lower limit for ISO sensitivity when ISO sensitivity is [AUTO]. • Set in the range between [200] and [3200]. [ISO Auto Upper Limit Setting] Sets the upper limit for ISO sensitivity when ISO sensitivity is [AUTO]. • Set to [AUTO] or in the range between [400] and [6400].
10. Recording Videos Video Settings (Audio) Explains the audio setting during video recording. [Sound Rec Level Disp.] The sound recording level is displayed on the recording screen. [ ] Select [Sound Rec Level Disp.] Settings: [ON]/[OFF] [Sound Rec Level Adj.] Sets the sound recording level. [ ] [AUTO] [MANUAL] Select [Sound Rec Level Adj.] Automatically adjusts the audio input level to smooth out the loudness of sounds. Manually adjusts the audio input level.
10. Recording Videos [Wind Noise Canceller] This reduces the wind noise coming into the built-in microphone while maintaining sound quality. [ ] Select [Wind Noise Canceller] This effectively reduces the wind noise by reducing the lowpitched sound when a strong wind is detected. [HIGH] [STANDARD] This reduces wind noise without loss of sound quality by filtering out only wind noise. [OFF] — • You may not see the full effect depending on the recording conditions.
10. Recording Videos [Built-in Mic] Sets the sound pickup range when using the built-in microphone. [ ] Select [Built-in Mic] Setting Sound pickup range [AUTO] ] ([Face/Eye Detection]) When the AF mode is set to [ and the camera recognizes a face, it switches to ] ([TRACKING])*1. In other cases, it is set to [ ] [ ([SURROUND]). [SURROUND] Picks up a wide range of sounds in all directions. [FRONT] Picks up sounds in front of the camera.
10. Recording Videos [Built-in Mic Indicator] Displays the sound pickup range and sound pickup target for the built-in microphone. [ ] Select [Built-in Mic Indicator] Settings: [ON]/[OFF] Sound pickup range Sound pickup target*1 *1 When the [Built-in Mic] is in [ ] ([AUTO]) or [ ] ([TRACKING]), and a face is ] ([Face/Eye Detection]), the camera automatically displays the recognized by [ sound pickup target according to the state of the subject.
10. Recording Videos Video Settings (Display) This section describes the main assist functions that are convenient when recording. • The [Custom] ([Monitor / Display]) menu has display assist functions such as the center marker. For details, refer to page 342. [Zebra Pattern] Parts that are brighter than the benchmark value are displayed with stripes.
10. Recording Videos [Frame Marker] A frame with the set aspect ratio is displayed on the recording screen. This allows you to see during recording the angle of view that will be achieved with trimming (cropping) in post-processing. [ ] [ ] Select [Frame Marker] [ON] [OFF] [Frame Aspect] [SET] 270 Displays video grid lines on the recording screen. — Sets the aspect ratio of video grid lines. [2.39:1]/[2.35:1]/[2.00:1]/[1.
10. Recording Videos Log Recording Setting [Photo Style] to [V-Log L] enables Log recording. Images finished with rich gradation can be created through post production processing. [ ]/[ ] [Photo Style] Select [V-Log L] • This camera records videos in 4:2:0/8 bit, so after post-production editing, luminance and color unevenness or noise may appear in areas such as blue skies, people’s skin, and white walls.
11. Playing Back and Editing of Images This chapter explains how to play back and delete pictures and videos. It also explains editing images. • Images recorded on devices other than this one may not be played back or edited correctly on this camera. • For [Playback] menu items not listed here, refer to “[Playback] Menu” beginning on page 362. Playing Back Pictures 1 2 Display the playback screen. ●●Press [ ]. Select a picture. ●●Select the pictures by pressing .
11. Playing Back and Editing of Images 3 Stop playback. ●●Press the shutter button halfway. ●●You can also stop playback by pressing [ ].
11. Playing Back and Editing of Images Playing Back Videos 1 2 Display the playback screen. ●●Press [ ]. Select a video. • For information about how to select images, refer to page 272. ] video icon is displayed for a • The [ video. Video recording time • The video recording time is displayed on the screen. 3 Play back the video. Elapsed playback time ●●Press . ●●You can also start playback by touching [ screen.
11. Playing Back and Editing of Images Operations During Video Playback Button operation Touch operation Description of operation Plays/pauses. Stops. Performs fast-rewind playback. again, the fast-rewind speed • If you press increases. Performs frame-by-frame rewinding (while paused). Performs fast-forward playback. again, the fast-forward speed • If you press increases. Performs frame-by-frame forwarding (while paused). Extracts a picture (while paused). (276) Reduces the volume.
11. Playing Back and Editing of Images Extracting a Picture Extract one frame of a video and save it as a JPEG image. 1 Pause playback at the position you wish to extract a picture. ●●Press . • To fine-adjust the position, press (rewind frame-by-frame or forward frameby-frame). 2 Save the picture. ●●Press . ●●You can also save the picture by touching [ ]. • The picture created from a video is saved with a [ ] picture quality.
11. Playing Back and Editing of Images Switching the Display Mode You can use features to do things like enlarge recorded images for display and switch to thumbnail display to display multiple images at once (multiplayback). You can also switch to calendar display to show images of a selected recording date. Enlarged Display Playback images can be displayed enlarged (Playback Zoom). Enlarging the playback screen. ●●Rotate to the right. ●●The playback screen is enlarged in the order of 2x 4x 8x 16x.
11. Playing Back and Editing of Images Thumbnail Screen 1 Switch to thumbnail display. ●●Rotate to the left. ●●The display is switched in the order of 12-image screen screen. 30-image • Rotating to the left during 30-image screen display switches to calendar display. (279) to the right returns to the • Rotating previous display. • You can also switch the display by touching an icon. ]: 1-image screen [ ]: 12-image screen [ ]: 30-image screen [ ]: Calendar [ 2 Select an image.
11. Playing Back and Editing of Images Calendar Playback 1 Switch to calendar playback. ●●Rotate to the left. ●●The display is switched in the order SUN MON 2020 12 of thumbnail screen (12 images) Thumbnail screen (30 images) Calendar playback. TUE WED 1 2 THU FRI 3 4 SAT 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 • Rotating to the right returns to the previous display. 2 3 Select the recording date.
11. Playing Back and Editing of Images Group Images Images recorded with Time Lapse Shot or Stop Motion Animation recording are handled as group images in the camera, and can be deleted and edited on a group basis. You can also delete and edit each image in a group individually. Images Handled as Group Images by the Camera Group images saved with [4K PHOTO Bulk Saving]. 15 pic. Group images recorded with Focus Bracket. Group images recorded with Time Lapse Shot.
11. Playing Back and Editing of Images Deleting Images • Images cannot be restored once they have been deleted. Carefully confirm the images before deletion. • If you delete a group image, all images in the group are deleted. [Delete Single] Press [ ] in playback state. Press to select [Delete Single] and then press . [Delete Multi] Press [ ] in playback state. Press to select [Delete Multi] and then press . 1 Press to select the image to .
11. Playing Back and Editing of Images [Light Composition] Select multiple frames from 4K burst files that you wish to combine. Parts of the image that are brighter than the preceding frame will be superimposed on the preceding frame to combine the frames into one picture. 1 2 Select [Light Composition]. ●● [ ] Select the 4K burst file. ●●Press then press 3 [Light Composition] to select an image and . Select the combining method. ●●Press 282 to select the combining method and then press .
11. Playing Back and Editing of Images [Composite Merging]: Selecting frames to combine Drag the slide bar or use to select the frames to combine. Press . • The selected frames are remembered, and the display goes to the preview screen. to select items and • Use to perform the following press operations. –– [Next]: L ets you select more frames for combining. iscards the frame –– [Reselect]: D selected immediately before and lets you select a different image. Repeat steps frames).
11. Playing Back and Editing of Images [Sequence Composition] Select multiple frames from a 4K burst file to create a sequence composition of a moving subject into one picture. 1 Select [Sequence Composition]. ●● [ ] [Sequence Composition] 2 Select the 4K burst file. ●●Press then press 3 to select an image and . Select frames to combine. Select the frames so that the moving subject will not overlap on the preceding or subsequent frames.
11. Playing Back and Editing of Images Drag the slide bar or use to select the frames to combine. Press . • The selected frames are remembered, and the display goes to the preview screen. to select items and • Use to perform the following press operations. –– [Next]: L ets you select more frames for combining. –– [Reselect]: D iscards the frame selected immediately before and lets you select a different image. Repeat steps 40 frames).
11. Playing Back and Editing of Images [Clear Retouch] You can erase unnecessary parts recorded on the pictures taken. • The erasure operation can only be performed by touching. [Clear Retouch] automatically enables the touch operation. 1 Select [Clear Retouch]. 2 Select a picture. ●● [ ] ●●Press then press [Clear Retouch] to select a picture and . 3 Drag your finger over the part you want to erase. 4 5 Touch [Set]. ●●The parts to be erased are colored.
11. Playing Back and Editing of Images Erasing details (enlarging the display) Touch [SCALING] • On the touch screen, pinch out your two fingers to zoom in, and pinch in your two fingers to zoom out. • Dragging the screen allows you to move the enlarged part. REMOVE SCALING Undo Set Touch [REMOVE] • This will bring you back to the operation of dragging your finger over the part you want to erase. The part you want to erase can be dragged even while the picture is enlarged.
11. Playing Back and Editing of Images [RAW Processing] This processes pictures taken in RAW format on the camera and saves them in JPEG format. 1 2 Select [RAW Processing]. ●● [ ] [RAW Processing] Select the RAW image. ●●Press then press to select an image and . • When selecting an image from group and then select an images, press again to image in the group. Press return to the normal selection screen. • The settings from the time of recording are reflected in displayed images.
11. Playing Back and Editing of Images 4 Change the setting. ●●Rotate or . • The image can be enlarged/reduced by pinching out/pinching in the screen. -2 5 -1 0 +1 +2 Confirm the setting. ●●Press . ●●The screen of Step 3 reappears. To set another item, repeat Steps 3 to 5. 6 Save the image. ●●Press to select [Begin Processing] and then press . Setting Items ([RAW Processing]) [Begin Processing] [White Balance] [Brightness correction] Saves the image.
11. Playing Back and Editing of Images [Photo Style] [i.Dynamic] Selects a Photo Style. • You cannot select a Photo Style for images recorded with [V-Log L]. You cannot select [V-Log L] for images not recorded with [V-Log L]. Selects the setting of [i.Dynamic]. [Contrast] Adjusts the contrast. [Highlight] Adjusts the brightness of bright portions. [Shadow] [Saturation]*1/ [Color Tone]*2 [Filter Effect]*2 [Grain Effect]*2 [Noise Reduction] [i.
11. Playing Back and Editing of Images Displaying a Comparison Screen You can change a setting while checking the effect by displaying images with the applied setting value side by side. Press [DISP.] in the screen of Step 4. • The image with the current setting is displayed at the center. • Touching the image with the current setting enlarges it. ] returns to the original Touching [ display. • If you have selected [Noise Reduction], [i.
11. Playing Back and Editing of Images [Video Divide] Divide a recorded video or 4K burst file into two. • Images cannot be returned to their original state once they have been divided. Carefully confirm the images before performing the divide operation. • Do not remove the card or battery from the camera during the divide process. The images may be lost. 1 2 Select [Video Divide]. ●● [ ] [Video Divide] Select and play the image. ●●Press then press to select an image and .
12. Camera Customization This chapter describes the customization function with which you can configure the camera to your preferred settings. Change how buttons, dials, etc. on the camera are to be operated. [Fn Button Set] 294 [Dial Operation Switch Setup] 299 Register the currently set information of the camera. Custom mode 305 Change menu display items. Quick menu 301 My Menu 307 • Detailed settings for camera operations and screen display are available in the [Custom] menu.
12. Camera Customization Fn Buttons You can register functions to the Fn (Function) buttons. Different functions can be set for both during recording and playback. Fn Button Default Settings 4 3 1 5 Fn buttons [Setting in REC mode] 2 [Setting in PLAY mode] 1 [Fn1] [Exposure Comp.] [Wi-Fi] 2 [Fn2] [Q.MENU] • Cannot be used as Fn buttons during playback.
12. Camera Customization Register Functions to the Fn Buttons 1 Select [Fn Button Set]. ●● [ ] [ ] [Fn Button Set] [Setting in REC mode]/[Setting in PLAY mode] 2 Select the button. ●●Press to select the button and then press . ●●Selection is also possible by rotating or . 3 Register the function. ●●Press to select a function and then press . ●●Selection is also possible by rotating or . • You can also touch [ ] on the monitor recording information screen (65) to display the screen in Step 2.
12. Camera Customization Functions that can be assigned in [Setting in REC mode] [4K Photo Mode] 164 [Quality] 121 [Exposure Comp.] 210 [Metering Mode] 209 [Wi-Fi] 382 [Burst Rate] 323 [Q.MENU] 63 [Self Timer] 186 [Video Record] 240 [Live View Composite] 103 [LVF/Monitor Switch] 58 [Bracket] 197 [LVF/Monitor Disp. Style] 347 [Focus Mode] 126 [AF/AE LOCK] 212 [Highlight Shadow] 318 [AF-ON] 213 [i.Dynamic] 319 [Preview] 106 [i.
12. Camera Customization [Special Mic. Directivity Adjust] 452 [Zoom Speed] 158 [Silent Mode] 203 [Sensitivity] 214 [Peaking] 344 [White Balance] 217 [Histogram] 345 [AF Mode/MF] [Guide Line] 345 131 148 [Frame Marker] 270 [Drive Mode] 159 [Zebra Pattern] 346 [Monochrome Live View] 342 [Constant Preview] 343 [Live View Boost] 343 [Rec Area] 348 [Step Zoom] 158 [Rec / Playback Switch] • Switches to the playback screen.
12. Camera Customization Use the Fn Buttons During recording, pressing the Fn buttons enables usage of the functions registered in [Setting in REC mode], and during playback, usage of the functions registered in [Setting in PLAY mode]. 1 2 Press the Fn button. Select a setting item. ●●Press to select a setting item and then press . ●●Selection is also possible by rotating or . • Display and selection methods of a setting item differ depending on the menu item.
12. Camera Customization [Dial Operation Switch] This temporarily changes the functions operated with (control dial). (front dial) and Register Functions to the Dials 1 Select [Dial Operation Switch Setup]. ●● [ ] [ ] [Dial Set.] [Dial Operation Switch Setup] [ ]/[ ] 2 Register the function. ●●Press to select a function and then press . ●●Selection is also possible by rotating or .
12. Camera Customization Temporarily Change Dial Operation 1 2 Set [Dial Operation Switch] to the Fn button. (294) Switch dial operation. ●●Press the Fn button set in Step 1. ●●A guide will display the functions registered to and . • If no operations are performed, then several seconds later, the guide disappears. 3 Set the registered function. ●●Rotate or while the guide is displayed. 4 Confirm your selection. ●●Press the shutter button halfway.
12. Camera Customization Quick Menu Customization For information about Quick menu operation methods, refer to page 63. Register to the Quick Menu Change the menus to be displayed in the Quick menu. Up to 15 items can be set to the Quick Menu. 1 Select [Q.MENU]. ●● [ ] [CUSTOM] [ ] [Q.MENU] 2 Close the menu. 3 Display the Quick menu. ●●Press the shutter button halfway. ●●Press [Q.MENU].
12. Camera Customization 4 Display the editing screen for the Quick menu. ●●Press and select [ then press . 5 ], and Register menu items. ●●Press 1/6 to select the menu item in the top row and press . • Items that are displayed in light gray in the top row have already been set. 6 Select the item position. ●●Press to select the empty space in the bottom row and press . • You can also set the menu item by dragging it from the top row to the bottom row.
12. Camera Customization 7 Close the Quick menu. ●●Press the shutter button halfway. ●●You can also close the menu by pressing [Q.MENU].
12.
12. Camera Customization Custom Mode Menu settings that match your preferences can be registered in Custom mode ([C1] to [C3]). You can use registered settings by switching the custom mode menu to [SET1] to [SET3] modes. Register in Custom Mode You can register the currently set information of the camera. At the time of purchase, the default settings of the [ ] mode menus are registered with all Custom modes. 1 Set to recording mode and menu settings of the state you wish to save. 2 Select [Cust.
12. Camera Customization • You cannot register [ ]/[ ] mode in Custom mode. Using Custom Mode Set the mode dial to [ ]. ●●The last-used Custom mode will be called up. Switching the Custom Mode [ ] [SET1]/[SET2]/[SET3] • It is also possible to display the selection screen by touching the recording mode icon in recording screen. Changing Registered Details Registered settings do not change even if you change the camera settings temporarily with the mode dial set to [ ].
12. Camera Customization My Menu Register frequently-used menus in My Menu. A maximum of 23 items can be registered. Registration in My Menu 1 Select [Add]. ●● [ ] [My Menu Setting] [Add] 2 Register. ●●Select the menu to register and then press . Calling up My Menu Call up the menus registered in My Menu.
12. Camera Customization Edit My Menu You can reorder the display order of My Menu, and delete unnecessary menus. [ ] Select [My Menu Setting] [Add] [Sorting] Changes the order of My Menu. Select the menu to change, then set the destination. [Delete] Deletes menus that are registered to My Menu. [Delete Item]: Selects the menu, then deletes. [Delete All]: Deletes all menus registered in My Menu. [Display from My Menu] 308 Selects and registers the menus to be displayed in My Menu.
13. Menu Guide This chapter provides a list of menus and describes them in detail. • For information about menu operation methods, refer to page 67.
13. Menu Guide List of Menu : Menu items common to the [Rec] menu and [Motion Picture] menu. Their settings are synchronized.
13. Menu Guide [Rec] menu (Continued) [Motion Picture] menu [Stop Motion Animation] 324 [Rec Quality] [Live View Composite] 324 [Snap Movie] 329 [Silent Mode] 324 [Focus Mode] 329 [Shutter Type] 324 [Continuous AF] 329 [Shutter Delay] 325 [AF Custom Setting(Video)] 329 [Bracket] 325 [Photo Style] 329 [HDR] 325 [Filter Settings] 330 [Multi Exp.] 327 [Luminance Level] 330 [Metering Mode] 330 [Highlight Shadow] 330 [i.Dynamic] 330 [i.
13. Menu Guide [Custom] menu [Exposure] 333 [Monitor / Display] 342 333 [Auto Review] 342 [Extended ISO] 333 [Monochrome Live View] 342 [Exposure Comp. Reset] 333 [Constant Preview] 343 333 [Live View Boost] 343 [Peaking] 344 [Histogram] 345 [Guide Line] 345 [Frame Marker] 346 [Center Marker] 346 [Highlight] 346 [Zebra Pattern] 346 [Expo.Meter] 347 [MF Guide] 347 [LVF/Monitor Disp. Set] 347 [Monitor Info. Disp.
13. Menu Guide [My Menu] [Setup] menu [Online Manual] 354 [My Menu Setting] 308 [Cust.Set Mem.
13. Menu Guide Menus displayed in specific recording modes : Default settings [Intelligent Auto] menu [Intelligent Auto Mode] [ ]/ [ ] Switches between [ 79 ] mode and [ ] mode. [ON] / [OFF] [iHandheld Night Shot] When the camera detects [iHandheld Night Shot], it records a still picture with less jitter and noise by combining multiple pictures.
13. Menu Guide [Slow & Quick] menu [P]/[A]/[S]/[M] [S&Q Exposure Mode] Selects the exposure mode. [S&Q Recording Frame Rate] Selects the recording frame rate. [S&Q Effect] [8xQUICK]/[4xQUICK]/ [2xQUICK]/[2xSLOW]/ [4xSLOW] [60p]/[50p]/[30p]/ [25p] 255 255 256 Select the speed effect. [Scene Guide] menu [Scene Switch] Displays the scene selection screen. 107 [Creative Control] menu [Filter Effect] [Simultaneous Record w/o Filter] Displays the selection screen of filter effect.
13. Menu Guide [Rec] Menu : Menu items common to the [Rec] menu and [Motion Picture] menu. Their settings are synchronized. : Default settings [Aspect Ratio] [Picture Size] [Quality] [4:3]/[3:2]/[16:9]/[1:1] You can select the image aspect ratio. [L]/[M]/[S] 120 Sets the picture’s image size. [ ]/[ ]/[ ]/[ ]/[ 119 ] Set the compression rate used for storing pictures.
13. Menu Guide [sRGB]/[AdobeRGB] [Color Space] This sets the method for correcting the color reproduction of the recorded images on the screens of a PC or on a device such as a printer. [sRGB]: This is widely used in PCs and similar devices. [AdobeRGB]: AdobeRGB is mainly used for business purposes such as professional printing because it has a greater range of reproducible colors than sRGB. • Set to [sRGB] if you are not very familiar with AdobeRGB.
13. Menu Guide [ [ [ [ [ ] ([Standard])/ ] ([Higher contrast])/ ] ([Lower contrast])/ ] ([Brighten shadows])/ ]/[ ]/[ ] (Custom) You can adjust the highlights and shadows in a picture while confirming the brightness of these areas on the screen. to adjust the highlighted areas and • Rotate to adjust the shadowed areas. Press rotate to confirm the setting. Highlighted area [Highlight Shadow] Shadowed area Preview display –– Adjustments can also be made by dragging the graph.
13. Menu Guide [Highlight Shadow] (Continued) • When using [Filter Settings], [Highlight Shadow] is not available. • When [Photo Style] is set to [V-Log L], this is fixed to [ ] ([Standard]). • The settings adjusted in [ ], [ ], [ ], or [ ] will be restored to the default settings when the camera is turned off. — [AUTO]/[HIGH]/[STANDARD]/[LOW]/ [OFF] [i.Dynamic] Contrast and exposure are compensated when the brightness difference between the background and subject is great.
13. Menu Guide [Flash Mode] [ ]/[ ]/[ ]/[ ]/[ ] Sets the flash mode. [Flash Synchro] [1ST]/[2ND] Sets the flash mode to Second Curtain Synchro. [Flash Adjust.] [–2 EV] to [+2 EV] ( [±0 EV]) Adjusts the flash output if a picture taken using the flash is too bright or too dark. [Auto Exposure Comp.] [Flash] [ON]/ [OFF] Enables recording using a wireless flash. [Wireless Channel] 233 235 237 [1CH]/[2CH]/[3CH]/[4CH] Sets the channel to use when recording with a wireless flash.
13. Menu Guide [ON]/ [OFF] [Red-Eye Removal] [ISO Sensitivity (photo)] ] or [ ], the When [Flash Mode] is set to [ camera automatically detects red-eye and corrects image data. [ISO Auto Lower Limit Setting] [200] to [12800] [ISO Auto Upper Limit Setting] [AUTO]/[400] to [25600] You can set the upper limit of ISO sensitivity when ].
13. Menu Guide [ON]/[OFF] [Long Shtr NR] The camera automatically removes noise generated when recording images with a slow shutter speed. • Recording is not possible during noise reduction. • When the following functions are being used, [Long Shtr NR] is not available: –– Video recording, [4K PHOTO], [Post Focus] –– [ESHTR] –– [Silent Mode] — [ON]/ [OFF] [Shading Comp.
13. Menu Guide [AUTO]/ [OFF] [Diffraction Compensation] The camera raises the image resolution by correcting the blurriness caused by diffraction when the aperture is closed. • Compensation effect may not be achieved depending on the recording conditions. • Noise may stand out with higher ISO sensitivity. [Operation Mode] [Stabilizer] [E-Stabilization (Video)] [ ]/[ — ]/[OFF] [HIGH]/ [STANDARD]/ [OFF] 206 Configures image stabilizer settings. [ZOOM]/[TELE CONV.]/ [OFF] [Ex. Tele Conv.
13. Menu Guide [ [Self Timer] ]/[ ]/[ [SET] ]/[ ] etc. 2 sec. to 10 sec. ( 3 sec.) 187 Sets the self-timer duration. [Start] [Time Lapse Shot] [Shooting Interval Setting] [ON]/[OFF] [Start Time] [Now]/[Start Time Set] [Image Count] [Shooting Interval] 189 Starts/stops recording automatically at a set recording interval. [Start] [Stop Motion Animation] [Auto Shooting] [ON]/ [OFF] 192 [Shooting Interval] Enables you to take pictures while moving the subject little by little.
13. Menu Guide [8SEC]/[4SEC]/[2SEC]/[1SEC]/ [OFF] [Shutter Delay] To reduce camera shake and shutter-induced blur, the shutter is released after the specified time has passed since the shutter button was pressed. • When the following functions are being used, [Shutter Delay] is not available: –– Video recording, [4K PHOTO], [Post Focus] –– [HDR] [Bracket Type] [Bracket] [ ]/[ [OFF] ]/[ ]/[ — ]/ 197 [More Settings] You can take multiple pictures while automatically adjusting a setting.
13. Menu Guide [HDR] (Continued) 326 [Auto Align]: [ON]: Automatically adjusts the displacement of pictures caused by jitter, etc. We recommend using this setting to take pictures with a handheld camera. [OFF]: Does not adjust the displacement of pictures. We recommend using this setting when you use a tripod. • After the shutter button has been pressed, do not move the camera during the burst operation.
13. Menu Guide [Start] [Auto Gain] [Overlay] [Multi Exp.] [ON]/[OFF] [ON]/ [OFF] You can apply an effect equivalent to four exposures on a single image. [Auto Gain]: Automatically adjusts brightness in accordance with image count. [Overlay]: Allows multiple exposure for recorded RAW images. After selecting [Start], a selection screen for images to stack is displayed. • After selecting [Start], pressing the shutter button fully starts multiple exposure.
13. Menu Guide [Multi Exp.] (Continued) 328 • To finish multiple exposure recording before starting the recording, press [Fn2] on the recording screen. • Recording information for the last-recorded image will be saved as recording information for images recorded with multiple exposures. • [Overlay] can be set only for RAW images recorded with the camera. • When the following functions are being used, [Multi Exp.
13. Menu Guide [Motion Picture] Menu : Menu items common to the [Rec] menu and [Motion Picture] menu. Their settings are synchronized. : Default settings [Rec Quality] Sets the video recording image quality. 241 [ON]/ [OFF] [SET] [Record time] [Pull Focus] [Snap Movie] [Fade] 257 You can specify the recording time in advance and record videos casually like you take snapshots. [AFS]/[AFF]/[AFC]/[MF] [Focus Mode] Selects the focusing method (focus mode) to match subject movement.
13. Menu Guide [Filter Settings] [Filter Effect] [ON]/ [OFF]/[SET] [Simultaneous Record w/o Filter] [ON]/ [OFF] 226 This mode records with additional image effects (filters). [0-255]/ [16-255] [Luminance Level] You can set the luminance range to suit the purpose of video recording. [ [Metering Mode] ]/[ ] Type of optical measurement to measure brightness can be changed.
13. Menu Guide [AUTO]/ [OFF] [Diffraction Compensation] The camera raises the image resolution by correcting the blurriness caused by diffraction when the aperture is closed. [Operation Mode] [Stabilizer] [ ]/[ ]/[OFF] [HIGH]/ [STANDARD]/ [OFF] [E-Stabilization (Video)] 323 206 Configures image stabilizer settings. [1/50]/[1/60]/[1/100]/[1/120]/ [OFF] [Flkr Decrease] — The shutter speed can be fixed to reduce the flicker or striping in a video. [Ex. Tele Conv.
13. Menu Guide [Wind Noise Canceller] [HIGH]/ [STANDARD]/[OFF] This reduces the wind noise coming into the built-in 266 microphone while maintaining sound quality. [HIGH]/[STANDARD]/[LOW]/ [OFF] [Wind Cut] This reduces wind noise when an external microphone is connected. 452 [ON]/[OFF] [Lens Noise Cut] [Built-in Mic] [Built-in Mic Indicator] You can reduce the zoom sound produced during video recording when you are using interchangeable lens compatible with power zoom.
13. Menu Guide [Custom] Menu : Default settings [Custom] menu [Exposure] [1/3EV]/[1 EV] [ISO Increments] [Extended ISO] [Exposure Comp. Reset] [Custom] menu Changes the intervals between ISO sensitivity adjustment values. [ON]/ [OFF] Extends the setting range of ISO sensitivity. [ON]/ [OFF] This resets the exposure value when you change the recording mode or turn off the camera.
13. Menu Guide [Custom] menu [Focus / Release Shutter] [ON]/ [OFF] [Quick AF] When the amount of camera shake becomes small, the camera will automatically adjust the focus and focus adjustment will then be quicker when the shutter button is pressed. • The battery will drain faster than usual.
13. Menu Guide [Custom] menu [Focus / Release Shutter] [ON]/[OFF] [AF Assist Lamp] When recording in low light conditions, the AF assist light turns on when you press the shutter button halfway, making it easier for the camera to focus. • The effective range of the AF Assist Lamp is different depending on the lens used. –– When the interchangeable lens (H-FS12032/ H-FS35100) is attached and at Wide: Approx. 1.0 m (3.3 feet) to 3.0 m (9.8 feet) • Remove the lens hood.
13. Menu Guide [Custom] menu [Focus / Release Shutter] [ON]/ [OFF] [Direct Focus Area] Moves the AF area or MF assist using the cursor button while recording. ], [ ], [ ], or [ ] is selected, you can • When [ ] is selected, you can move move the AF area, when [ ] is selected, you the lock start position, and when [ can move the focus position. • Perform the setting of functions assigned to the cursor buttons using the Quick menu (301) or function buttons (295).
13. Menu Guide [Custom] menu [Focus / Release Shutter] [ON]/ [OFF] [Focus Switching for Vert / Hor] This stores separate AF area positions for when the camera is held vertically and when it is held horizontally. The camera memorizes two different vertical positions, one with the camera’s right side facing down and one with the left side facing down. ], • This function works when the AF mode is set to [ ] or [ ]. [ • In MF, this memorizes the MF Assist position.
13. Menu Guide [Custom] menu [Focus / Release Shutter] [ON]/ [OFF] [AF+MF] You can fine-adjust the focus manually during AF Lock. –– When focus mode is [AFS], and the shutter button is pressed halfway –– When locked using the Fn button [AF LOCK] or [AF/AE LOCK] When an interchangeable lens with a focus ring is attached When an interchangeable lens with no focus ring is attached [MF Assist] [ ]/ [ ]/[ ]/[OFF] [ON]/[OFF] This sets the display method of MF Assist (enlarged screen).
13. Menu Guide [Custom] menu [Operation] [Setting in REC mode] [Fn Button Set] [Setting in PLAY mode] Registers a function to the Fn button. • For details, refer to page 295. [Front Dial] [ISO Displayed Setting] [Cursor Buttons (Up/ Down)] [Exposure Comp. Disp. Setting] [ ]/[ ]/[OFF] This sets the operations of the dials in the setting screen for ISO sensitivity. ] lets you change [ISO Auto Upper Limit Assigning [ Setting].
13. Menu Guide [Custom] menu [Operation] [Assign Dial (F/SS)] [ ]/[ ] Sets the operations to be assigned to the dials in [ ] mode. ]: Assigns the aperture value to the front dial, [ and the shutter speed to the control dial. ]: Assigns the shutter speed to the front dial, and [ the aperture value to the control dial. [ [Rotation (F/SS)] [Dial Set.] ]/[ ] Changes the rotational directions of the dials for aperture value and shutter speed adjustment. [Exposure Comp.
13. Menu Guide [Custom] menu [Operation Lock Setting] [Operation] [Cursor] [ON]/[OFF] [Touch Screen] [ON]/[OFF] [Dial] [ON]/[OFF] You can set an object for which operation is disabled when [Operation Lock] is assigned to the function button using [Fn Button Set] (295) in the [Custom] ([Operation]) menu. [Cursor]: Cursor buttons and [Touch Screen]: Touch screen , and [Dial]: [ON]/ [OFF] [Focus Ring Lock] [Video Rec.
13. Menu Guide [Custom] menu [Monitor / Display] [Duration Time (photo)] [Duration Time (4K PHOTO)] [HOLD]/[OFF] [Duration Time (Post Focus)] [HOLD]/[OFF] [Playback Operation Priority] [Auto Review] [HOLD]/[5SEC] to [1SEC] ( [2SEC])/ [OFF] [ON]/ [OFF] This displays an image immediately after it is recorded. [Duration Time (photo)]: Sets the Auto Review when taking pictures. [Duration Time (4K PHOTO)]: Sets the Auto Review when recording 4K photos.
13. Menu Guide [Custom] menu [Monitor / Display] [ON]/ [OFF] [SET] [Constant Preview] [Preview While MF Assist] You can always confirm the effects of aperture and shutter speed on the recording screen when in [ ] mode. Preview also operates in the MF Assist screen when [Preview While MF Assist] is set to [ON]. • This function does not work when using the flash.
13. Menu Guide [Custom] menu [Monitor / Display] [ON]/[OFF] [SET] [Detect Level] [Display Color] During MF operation, in-focus portions (portions on the screen with clear outlines) are highlighted with color. • When [Detect Level] in [SET] is set to [HIGH], portions to be highlighted are reduced, allowing you to achieve a more precise focus. • Changing the [Detect Level] setting also changes the [Display Color] setting as follows.
13. Menu Guide [Custom] menu [Monitor / Display] [ON]/ [OFF] [Histogram] This displays the histogram. Turning this [ON] displays the histogram transition screen. to set the position. Press • You can also move the position by dragging the histogram on the recording screen. • A histogram is a graph that displays brightness along the horizontal axis, and the number of pixels at each brightness level on the vertical axis. By looking at the distribution of the graph, you can determine the current exposure.
13. Menu Guide [Custom] menu [Monitor / Display] [ON]/ [OFF] [SET] [Frame Aspect] [Frame Color] [Frame Marker] [Frame Mask] A frame with the set aspect ratio is displayed on the recording screen. • For details, refer to page 270. [Center Marker] [ON]/ [OFF] The center of the recording screen will be displayed as [+]. [ON]/ [OFF] Overexposed areas appear blinking in black and white during Auto Review or playback.
13. Menu Guide [Custom] menu [Monitor / Display] [ON]/ [OFF] This displays the exposure meter. 15 30 60 125 250 4.0 5.6 8.0 11 [Expo.Meter] • Set to [ON] to display the exposure meter when performing Program Shift, setting aperture, and setting shutter speed. • If no operations are performed for a certain period of time, the exposure meter disappears. [ON]/[OFF] [MF Guide] During MF, MF Guide, which acts as a guide to recording distance, is displayed on the screen. [LVF Disp.
13. Menu Guide [Custom] menu [Monitor / Display] [ [Rec Area] [ [Remaining Disp.] [Red REC Frame Indicator] ]/[ ] Switching the angle of view setting used for recording still pictures and video. ]: Indicated as the angle of view when recording still [ pictures. ]: Indicated as the angle of view when recording video. [ • The recording area indicated is an approximation. ] when recording 4K photos or • [Rec Area] is fixed to [ recording in [Post Focus].
13. Menu Guide [Custom] menu [Lens / Others] [ON]/ [OFF] [Lens Position Resume] The camera saves the focus position when you turn it off. When an interchangeable lens that is compatible with power zoom is in use, the zoom position is also saved. [Disp Focal Length] [Step Zoom] [Power Zoom Lens] [Zoom Speed] [Zoom Ring] [ON]/[OFF] [ON]/ [OFF] [Photo] [H]/ [M]/[L] [Video] [H]/ [M]/[L] [ON]/[OFF] Sets the screen display and operation when using an interchangeable lens compatible with power zoom.
13. Menu Guide [Custom] menu [Lens / Others] [SMOOTH]/ [1/3EV] [Aperture Ring Increment] [Self Timer Auto Off] [SMOOTH]: You can finely adjust the aperture value. [1/3EV]: You can adjust the aperture value in increments of 1/3 EV. You can change the aperture adjustment increment by operating the aperture ring. • This setting is available when an interchangeable lens that supports a click-less aperture ring (optional: H-X1025) is attached (as of June 2020).
13. Menu Guide [Custom] menu [Lens / Others] [ON]/ [OFF]/[MEMORY] The Face Recognition function recognizes a face similar to a registered face and automatically adjusts focus and exposure for the face with higher priority. Registering face pictures Up to 6 people’s face pictures can be registered along with such information as name and birthdate. 1 Use to select [MEMORY] and press 2 Use to select [New] and press 3 Align the face with the guide and record. . . • Faces of subjects other than people (e.
13. Menu Guide [Custom] menu [Lens / Others] Editing or deleting information about registered persons 1 Use 2 Use to select [MEMORY] and press . to select the picture of the person to be . edited or deleted and press 3 Use to select the item and press . [Info Edit]: E dit name or other registered information. (Step 4 of “Registering face pictures”) [Priority]: Set priority order for focus and exposure. Use to select the registration .
13. Menu Guide [Custom] menu [Lens / Others] [ ]/[ ]/[ ]/ [OFF] / [SET] The name and age of the baby/pet are recorded to the image. Setting the name and age in months/years 1 Use 2 Use to select [SET] and press . to select [Baby1], [Baby2] or [Pet] and press . 3 Use to select [Age] or [Name] and press . 4 Use [Profile Setup] to select [SET] and press . Enter the [Age]. Enter the [Name].
13. Menu Guide [Setup] Menu : Default settings [URL display]/[QR Code display] [Online Manual] Displays the URL or QR code in order to download the “Operating Instructions” (PDF format). [C1]/[C2]/[C3] [Cust.Set Mem.] [Clock Set] You can register the currently set information of the camera. • For details, refer to page 305. Sets the date and time. • For details, refer to page 47. ] [Destination] [ [ ] [Home] Sets the times for the region where you live and your travel destination.
13. Menu Guide [Travel Date] [Wi-Fi] [Travel Setup] [SET]/ [OFF] [Location] [SET]/ [OFF] [Travel Setup]: If you set your travel schedule and record pictures, the day of your trip on which the picture was taken will be recorded. [Location]: Once the [Travel Setup] is set, you can set the location. • For details on how to enter characters, refer to “Entering Characters”.
13. Menu Guide [Bluetooth] (377) [Send Image (Smartphone)] (409) [Remote Wakeup] (398) [Returning from Sleep Mode] (392) [Auto Transfer] (395) [Bluetooth] [Location Logging] (397) [Auto Clock Set] (399) [Wi-Fi network settings] [Wi-Fi network settings]: Registers the Wi-Fi access point. Wireless access points used to connect the camera to Wi-Fi networks will be registered automatically. [Wireless Connection Lamp] [ON]/[OFF] The lamp lights while the wireless function is operating.
13. Menu Guide [Sleep Mode] [Economy] [10MIN.]/ [5MIN.]/[2MIN.]/[1 MIN.]/ [OFF] [Sleep Mode(Wi-Fi)] [ON]/[OFF] [Auto LVF/Monitor Off] [5MIN.]/[2MIN.]/[1 MIN.]/[OFF] [Power Save LVF Shooting] [Time] [Display] This is a function to automatically turn the camera to sleep (power save) status or turn off the viewfinder/monitor if no operation is performed for a set time. • For details, refer to page 37. [ECO 30fps]/ [60fps] [Monitor Display Speed] Sets the display speed for live view on the monitor.
13. Menu Guide [Brightness]/[Contrast]/[Saturation]/[Red Tint]/[Blue Tint] This adjusts the brightness, coloring, and red or blue tints of the monitor/viewfinder. [Monitor Display]/ [Viewfinder] 1 Press to select the setting item, and press to adjust. 2 Press to confirm the setting. • It will adjust the monitor when the monitor is in use, and the viewfinder when the viewfinder is in use. [AUTO]/[-3] to [+3] [Monitor Luminance]/ [LVF Luminance] Adjusts monitor/viewfinder luminance.
13. Menu Guide [ [ [USB Mode] [TV Connection] ] [Select on connection]/[ ] [PictBridge(PTP)] ] [PC(Storage)]/ This sets the communication method to be used when the USB connection cable is connected. ] [Select on connection]: Select this setting to [ select the USB communication system when connecting to another device. ] [PC(Storage)]: Select this setting to export images to [ a connected PC. ] [PictBridge(PTP)]: Select this setting when [ connecting to a printer that supports PictBridge.
13. Menu Guide [HDMI Info Display (Rec)] [TV Connection] (Continued) [MODE1]/[MODE2]/[OFF] Sets the camera’s information display that will be outputted to the external device connected via HDMI. [MODE1]: This constantly outputs the information display. [MODE2]: This outputs the information display for 5 seconds when the camera is operated. [OFF]: This does not output the information display. • When set to [OFF], only the following switches/buttons are enabled.
13. Menu Guide [Folder / File Settings] [Select Folder]/[Create a New Folder]/[File Name Setting] Set the folder and file name where to save the images. • For details, refer to page 123. [No.Reset] Resets the file number of the next recording to 0001. • For details, refer to page 125. [Reset] Returns the camera to its default settings. • For details, refer to page 69.
13. Menu Guide [Playback] Menu How to Select an Image(s) in the [Playback] menu Follow the steps below when the image selection screen is displayed. When [Single] has been selected Press Press to select the image. . • If [Set/Cancel] is displayed at the right bottom of the screen, the setting is is pressed again. canceled when Set When [Multi] has been selected Press then press to select the image and (repeat). • The setting is canceled when pressed again. is 1 2 3 4 5 6 Press [DISP.
13. Menu Guide : Default settings [ALL]/[Picture Only]/[Video Only] [Slide Show] Selects image types and plays them back at regular intervals in order. [Start]: Starts slide show playback. [Effect]: Allows you to select the screen effects when switching from one picture to the next. [Setup]: [Duration]/[Repeat]/[Sound] [Duration]: Sets the duration to play an image. [Duration] can be set only when [Effect] is set to [OFF]. [Repeat]: Sets repeat playback.
13. Menu Guide [Single]/[Multi]/[Cancel] [Protect] You can set protection for images so that they will not be deleted by mistake. However, if you format the card, the protected images will also be deleted. • For information about how to select images, refer to page 362. • Be careful because the [Protect] setting may be disabled on a device other than this camera.
13. Menu Guide You can enter characters (titles etc.) on a recorded picture. After text has been registered, it can be stamped in prints using [Text Stamp] (367). 1 Select a still picture (362). 2 [Title Edit] ] is displayed for pictures with texts already • [ stamped. Enter characters. • For details on how to enter characters, refer to “Entering Characters” (372). • To delete texts, delete all the characters in the character input screen.
13. Menu Guide [REPLACE]/[DELETE] Edit or delete the recognition information for pictures with incorrect information. 1 Use to select picture and press 2 Use [Face Rec Edit] to select a person and press • If [DELETE], go to step 4. . . 3 Use to select the person to replace for . another and press 4 Use to select [Yes] and press . • When Face Recognition information is deleted, it cannot be restored.
13. Menu Guide You can stamp the recording date and time, names, travel destination, travel dates, etc. on the recorded still pictures. 1 Select a still picture (362). ] is displayed on the screen if the picture is • [ already stamped with [Text Stamp]. 2 Select the content to stamp. [Text Stamp] to select [Set] and press .
13. Menu Guide [Single]/[Multi] [Resize] 368 Reduce the picture size of JPEG images and save them as different images to enable them to be easily used for web pages or sent as email attachments. • For information about how to select images, refer to page 362. –– When [Single] is selected, after choosing the image, to select the size, then press . press –– When [Multi] is selected, before choosing the images, to select the size, then press . press • You can set up to 100 images at once with [Multi].
13. Menu Guide Enlarge your still pictures and crop unwanted areas. 1 Use to select a still picture and press 2 Select area to crop and press . [Cropping] • • • • . Operations during cropping : Enlarges/reduces the screen. You can also perform the same operation by ]/[ ]. touching [ : Moves the enlarged area. You can perform the same operation by dragging on the screen. Original Face Recognition information will not be copied when still pictures are cropped. Picture quality is reduced after cropping.
13. Menu Guide This creates videos from group images recorded with [Time Lapse Shot]. 1 Press [Time Lapse Video] to select a group images recorded with . [Time Lapse Shot] and then press 2 Select the options for creating a video to combine the pictures into a video. • For details, refer to page 195. This creates videos from group images recorded with [Stop Motion Animation]. 1 Press [Stop Motion Video] to select a group images recorded with .
13. Menu Guide ["Yes" first]/ ["No" first] [Delete Confirmation] This sets which option, [Yes] or [No], will be highlighted first when the confirmation screen for deleting an image is displayed. ["Yes" first]: [Yes] is highlighted first. ["No" first]: [No] is highlighted first. [Delete All]/[Delete All Non-rating] [Delete All Images] Deletes all images in a card. [Delete All]: Deletes all images in a card. [Delete All Non-rating]: Deletes all images except those with a rating set.
13. Menu Guide Entering Characters Follow the steps below when the character entry screen is displayed. 1 Enter characters. ●●Press to select characters and then press until the character to enter is displayed. (Repeat this) • To repeatedly enter the same character, or to the right to move the rotate entry position cursor.
14. Wi-Fi/Bluetooth This chapter explains the Wi-Fi® and Bluetooth® functions of the camera. Remote Operations from a Smartphone You can use the “LUMIX Sync” for remote recording and image transfers. 375 Transferring Images from This Camera Send recorded images to a device connected via Wi-Fi by operating the camera. 402 This document refers to both smartphones and tablets as smartphones.
14. Wi-Fi/Bluetooth • Do not remove the card or battery or move to an area without any reception while sending images. • The camera cannot be used to connect to a public wireless LAN connection. • We strongly recommend that you set an encryption to maintain information security. • We recommend that you use a sufficiently charged battery when sending images. • When the remaining battery level is low, it may not be possible to connect to or maintain communication with other devices.
14. Wi-Fi/Bluetooth Connecting to a Smartphone You can perform remote recording and transfer images using the smartphone app “Panasonic LUMIX Sync” (hereinafter referred to as “LUMIX Sync”). Flow of connecting a smartphone 1 Install “LUMIX Sync” on your smartphone. (376) Connect to a smartphone.
14. Wi-Fi/Bluetooth Installing “LUMIX Sync” “LUMIX Sync” is an application for smartphones provided by Panasonic. Supported OS 1 2 Android™: Android 5 or higher iOS: iOS 11 or higher Connect the smartphone to a network. (Android) Select “Google Play™ Store”. (iOS) Select “App Store”. 3 Enter “Panasonic LUMIX Sync” or “LUMIX” into the search box. 4 Select and install the “Panasonic LUMIX Sync” . • Use the latest version. • Supported OSs are current as of June 2020 and are subject to change.
14. Wi-Fi/Bluetooth Connecting to a Smartphone (Bluetooth Connection) Follow a simple connection setup procedure (pairing) to connect to a smartphone that supports Bluetooth Low Energy. When pairing is set up, the camera also automatically connects to the smartphone via Wi-Fi. • For the first-time connection, pairing settings are required. For information about connecting for the second and subsequent times, refer to page 380. • Supported smartphones Android™: Android 5 or higher with Bluetooth 4.
14. Wi-Fi/Bluetooth Operating the camera in accordance with the smartphone guide. 3 Set the camera to Bluetooth pairing standby state. ●● [ ] [Bluetooth] [Bluetooth] [SET] [Pairing] ●●The camera enters pairing standby state and the device name is displayed. 4 On the smartphone, select the camera’s device name. • (iOS devices) When a message to confirm the change of destination is displayed, select [Join]. 5 When a message indicating that device registration is complete, select [OK].
14. Wi-Fi/Bluetooth • The paired smartphone is registered as a paired device. • During Bluetooth connection, [ ] is displayed in the recording screen. When the Bluetooth function is enabled, but a connection is not established with the smartphone, [ ] appears translucent. • Up to 16 smartphones can be registered. If you try to register more than 16 smartphones, the registration information will be deleted from the oldest first.
14. Wi-Fi/Bluetooth Connecting to a Paired Smartphone Connect paired smartphones using the following procedure. Enable the Bluetooth function of the camera. • [ ] [Bluetooth] [Bluetooth] [ON] On the smartphone, start up “LUMIX Sync”. • If a message is displayed indicating that the smartphone is searching for cameras, close the message. Select [ ]. Select [Bluetooth Setup]. Turn Bluetooth ON. From [Camera registered] items, select the camera’s device name.
14. Wi-Fi/Bluetooth Canceling Pairing Cancel the pairing setting of the camera. • [ ] [Bluetooth] [Bluetooth] [SET] [Delete] Select the smartphone for which to cancel the pairing. • Also cancel the pairing setting on the smartphone. • When [Reset Network Settings] in the [Setup] menu is used to reset the network settings, the information for registered devices is deleted.
14. Wi-Fi/Bluetooth Connecting to a Smartphone (Wi-Fi connection) Use Wi-Fi to connect the camera and a smartphone. With default settings, simple connection with smartphones is possible without entering a password. You can also use password authentication for enhanced connection security. 1 Set the camera to Wi-Fi connection standby status. ●● [ ] [Wi-Fi] [Wi-Fi Function] [New Connection] [Remote Shooting & View] ●●The SSID of the camera is displayed on the screen.
14. Wi-Fi/Bluetooth 4 On the smartphone, start up “LUMIX Sync”. 5 (At the first connection) Confirm the device name displayed on the camera and then select [Yes]. • When a device different than the one you want to connect to is displayed, the camera will automatically connect to that device if you select [Yes]. If there are other Wi-Fi connection devices nearby, we recommend using either QR code or manual password input to connect with password authentication.
14. Wi-Fi/Bluetooth Using Password Authentication to Connect You can enhance Wi-Fi connection security by using password authentication through either QR code or manual input. Scanning QR code to connect Set [Wi-Fi Password] on the camera to [ON]. • [ ] [Wi-Fi] Display the QR code [Wi-Fi Setup] [Wi-Fi Password] [ON] . • [ ] [Wi-Fi] [Wi-Fi Function] [New Connection] [Remote Shooting & View] • You can also perform the same operation by pressing the Fn button assigned with [Wi-Fi].
14. Wi-Fi/Bluetooth Manually entering a password to connect Display the screen in Step on page 384. In the setting menu of the smartphone, turn the Wi-Fi function ON. On the Wi-Fi setup screen, select the SSID displayed on the camera. (At the first connection) Enter the password displayed on the camera. On the smartphone, start up “LUMIX Sync”.
14. Wi-Fi/Bluetooth Connection Methods Other Than the Default Settings When connecting with [Via Network], or [WPS Connection] in [Direct], follow the steps below: Display the connection method setting screen for the camera. • [ ] [Wi-Fi] Shooting & View] [Wi-Fi Function] [New Connection] [Remote Press [DISP.]. Connecting via network 1 Select [Via Network] and then press . • Follow the connection method on page 420 to connect the camera to a wireless access point.
14. Wi-Fi/Bluetooth Terminating the Wi-Fi Connection To end the Wi-Fi connection between the camera and smartphone, follow the steps below. 1 Set the camera to recording mode. ●●Press the shutter button halfway. 2 Terminate the Wi-Fi connection. ●● [ ] [Wi-Fi] [Wi-Fi Function] [Yes] • You can also perform the same operation by pressing the Fn button assigned with [Wi-Fi]. For information about the Fn button, refer to page 294. 3 On the smartphone, close the “LUMIX Sync”.
14. Wi-Fi/Bluetooth Operating the Camera with a Smartphone This explains the functions for operating the camera from a smartphone. Functions described in this document with the ( ) symbol require a smartphone that supports Bluetooth Low Energy. Getting started: • Connect the camera to a smartphone. (377, 382) • On the smartphone, start up “LUMIX Sync”. Home Screen When you start up “LUMIX Sync”, the home screen is displayed.
14. Wi-Fi/Bluetooth [Remote shooting] You can use the smartphone to record from a remote location while viewing the live view images from the camera. 1 Select [ ] ([Remote shooting]) in the home screen. • (iOS devices) When a message to confirm the change of destination is displayed, select [Join]. 2 Start recording. Takes a picture Starts/ends the video recording • The recorded image is saved on the camera. • Certain features, including some settings, may not be available.
14. Wi-Fi/Bluetooth Operation Method During Remote Recording Set either the camera or the smartphone as the priority control device to be used during remote recording. [ ] [Wi-Fi] [Wi-Fi Setup] Select [Priority of Remote Device] [Camera] Operation is possible on both the camera and the smartphone. • The camera’s dial settings, etc. cannot be changed with the smartphone. [Smartphone] Operation is possible only on the smartphone. • The camera’s dial settings, etc.
14. Wi-Fi/Bluetooth [Shutter Remote Control] You can use the smartphone as a remote control for the shutter. 1 Select [ screen. 2 Start recording. ] ([Shutter Remote Control]) in the home Starts/ends the video recording Takes a picture • Bulb recording (391) Bulb Recording The shutter can be kept open from the start to end of recording, which is useful for recording of starry skies or night scenery. Getting started: • Set the camera to [ ] mode.
14. Wi-Fi/Bluetooth Shortening the Return Time from [Sleep Mode] You can shorten the time it takes for the camera to return from [Sleep Mode] when the [Shutter Remote Control] is used. Getting started: • Set [Remote Wakeup] in [Bluetooth] to [ON]. (398) [ ] [Bluetooth] Select [Returning from Sleep Mode] [Import / Remote Priority] Shortens the time to return when using [Import images] or [Remote shooting]. [Shutter Remote Priority] Shortens the time to return when using [Shutter Remote Control].
14. Wi-Fi/Bluetooth [Import images] Transfer an image stored on the card to the smartphone connected via Wi-Fi. 1 Select [ ] ([Import images]) in the home screen. • (iOS devices) When a message to confirm the change of destination is displayed, select [Join]. 2 Select the image to transfer. 3 Transfer the image. ●●Select [ ]. • If the image is a video, you can play it ] at the center of back by touching [ the screen.
14. Wi-Fi/Bluetooth • When a video is played back, this has a small data size and is transmitted using “LUMIX Sync”, therefore its image quality will differ from that of the actual video recording. Depending on the smartphone and on the usage conditions, the image quality may deteriorate or the sound may skip during video or picture playback. • Files larger than 4 GB cannot be sent.
14. Wi-Fi/Bluetooth [Auto Transfer] You can automatically transfer recorded pictures to a smartphone as they are taken. 1 Enable [Auto Transfer] on the camera. ●● [ ] [Bluetooth] Transfer] [ON] [Auto • If a confirmation screen is displayed on the camera asking you to terminate the Wi-Fi connection, select [Yes] to terminate it. 2 On the smartphone, select [Yes] (for Android devices) or [Join] (for iOS devices). • The camera automatically makes a Wi-Fi connection.
14. Wi-Fi/Bluetooth To Stop the Automatic Transfer of Images [ ] [Bluetooth] [Auto Transfer] Select [OFF] ●●A confirmation screen is displayed, asking you to terminate the Wi-Fi connection. • If the [Bluetooth] and [Auto Transfer] settings of the camera are [ON], the camera automatically connects to the smartphone via Bluetooth and Wi-Fi when you turn on the camera. Start up the “LUMIX Sync” on the smartphone to connect to the camera.
14. Wi-Fi/Bluetooth [Location Logging] The smartphone sends its location information to the camera via Bluetooth, and the camera performs recording while writing the acquired location information. Getting started: • Enable the GPS function on the smartphone. 1 Enable [Location Logging] on the camera. ●● [ ] [Bluetooth] Logging] [ON] [Location • The camera will enter a mode where location information can be recorded ] is displayed in the recording and [ screen of the camera.
14. Wi-Fi/Bluetooth [Remote Wakeup] Even when the camera is turned off, the smartphone can be used to start the camera and record images, or check the recorded images. Getting started: Enable [Remote Wakeup] on the camera. • [ ] [Bluetooth] [Remote Wakeup] [ON] Set the camera on/off switch to [OFF]. On the smartphone, start up “LUMIX Sync”. Turning On the Camera Select [Remote shooting] in the “LUMIX Sync” home screen.
14. Wi-Fi/Bluetooth [Auto Clock Set] Synchronize the clock and the time zone setting of the camera with those of a smartphone. Enable [Auto Clock Set] on the camera.
14. Wi-Fi/Bluetooth Displaying still pictures on a TV You can display still pictures on a TV that is compatible with a DLNA (DMR) function. 1 Select [Playback on TV]. ●● [ ] [Wi-Fi] [Wi-Fi Function] [New Connection] [Playback on TV] 2 Connect the camera to the TV via Wi-Fi. ●●Select [Via Network] (420) or [Direct] (423) to connect. 3 4 Select the device you wish to connect to. Take or play back still pictures on this unit.
14. Wi-Fi/Bluetooth • When you display the pictures on a TV using the Wi-Fi function, they are not output using 4K resolution. To output pictures using 4K resolution, connect this unit to the TV using an HDMI micro cable. (436) • When a TV is connected to this unit, the TV screen may temporarily return to the status before the connection. Pictures are displayed again when you take or play back pictures.
14. Wi-Fi/Bluetooth Sending Images from the Camera Operate the camera to send recorded images to a device connected by Wi-Fi. Operation flow Select the sending method. 1 Select the sending method from the [Send Images While Recording] and [Send Images Stored in the Camera] camera menus. Select the destination (type of the destination device). 2 3 –– [Smartphone] (406) –– [PC] (409) –– [Printer] (412) –– [AV device] (414) –– [Web service] (416) –– [Cloud Sync.
14. Wi-Fi/Bluetooth Refer to the following pages for the steps common to all devices. –– Wi-Fi connections: [Via Network] (420)/[Direct] (423) –– Image send settings (426) –– Selecting images (428) • When recording, recording is prioritized so it will take time for sending to complete. • If the camera is turned off, or the Wi-Fi is disconnected before sending is completed, then sending will not restart. • You may not be able to delete files or use the [Playback] menu while sending.
14. Wi-Fi/Bluetooth Images That Can be Sent Images that can be sent differ depending on the destination device. Images that can be sent Destination device [Send Images While Recording] [Send Images Stored in the Camera] JPEG/RAW/MP4*1 [Smartphone] (406) JPEG/RAW [PC] (409) JPEG/RAW JPEG/RAW/MP4/ 4K burst files/ Post-Focus images [Cloud Sync.
14. Wi-Fi/Bluetooth Fn Button Assigned with [Wi-Fi] You can perform the following operations by pressing the Fn button assigned with [Wi-Fi] after connecting to Wi-Fi. For information on Fn buttons, refer to page 294. [Terminate the Connection] Terminates the Wi-Fi connection. [Change the Destination] Terminates the Wi-Fi connection, and allows you to select a different Wi-Fi connection.
14. Wi-Fi/Bluetooth [Smartphone] Transfer recorded images to a smartphone connected using Wi-Fi. Getting started: • Install “LUMIX Sync” on your smartphone. (376) 1 Select the method for sending the images on the camera. ●● [ ] [Wi-Fi] [Wi-Fi Function] [New Connection] [Send Images While Recording]/[Send Images Stored in the Camera] 2 Set the destination to [Smartphone]. 3 Connect the camera to a smartphone by Wi-Fi. ●●Select [Via Network] (420) or [Direct] (423), and then connect.
14. Wi-Fi/Bluetooth 6 Check the send settings and then press . • To change the send settings of images, press [DISP.]. (426) 7 When [Send Images While Recording] is selected: Take pictures. • [ ] is displayed in the recording screen of the camera while a file is being sent. • To end the connection, follow the steps below: [ ] [Wi-Fi] [Wi-Fi Function] [Yes] When [Send Images Stored in the Camera] is selected: Select an image. • To end the connection, select [Exit].
14. Wi-Fi/Bluetooth Sending Images on the Camera to a Smartphone with Simple Operations You can transfer pictures to a smartphone connected by Bluetooth just by pressing [ ] ([Send Image (Smartphone)]) button during playback. You can also use the menu to connect easily. • Use the Fn button registered with [Send Image (Smartphone)] to operate. In default settings, this is registered in [Fn4]. For information about the Fn button, refer to page 294.
14. Wi-Fi/Bluetooth Using the menu to transfer easily [ ] [Bluetooth] [Send Image (Smartphone)] Settings: [Single Select]/[Multi Select] • If [Single Select], press to select the image and then press to execute. • If [Multi Select], use the same operation as with “Send multiple images”. • This function is not available when [Auto Transfer] in [Bluetooth] is set to [ON]. [PC] Send recorded images to the PC connected with Wi-Fi. Supported OS Windows: Windows 10/Windows 8.1/Windows 8 Mac: OS X v10.
14. Wi-Fi/Bluetooth When using Mac (Example for OS X v10.14) Select the destination folder and then click the items in the following order. [File] [Get Info] Enable folder sharing. • Create a PC account name (up to 254 characters) and password (up to 32 characters) consisting of alphanumeric characters. A destination folder may not be created if the account name includes nonalphanumeric characters. • When the computer name (NetBIOS name for Mac) contains a space (blank character), etc.
14. Wi-Fi/Bluetooth 3 Connect the camera and PC by Wi-Fi. ●●Select [Via Network] (420) or [Direct] (423), and then connect. 4 Enter the computer name of the PC name you want to connect to (for Mac, the NetBIOS name). 5 Select a folder for storing images. • Folders sorted by sent date will be created in the selected folder, and images will be saved there. 6 Check the send settings and then press . • To change the send setting, press [DISP.].
14. Wi-Fi/Bluetooth 7 When [Send Images While Recording] is selected: Take pictures. • [ ] is displayed in the recording screen of the camera while a file is being sent. • To end the connection, follow the steps below: [ ] [Wi-Fi] [Wi-Fi Function] [Yes] When [Send Images Stored in the Camera] is selected: Select an image. • To end the connection, select [Exit]. • If the screen for a user account and password entry appears, enter the one you set on your PC.
14. Wi-Fi/Bluetooth 2 Set the destination to [Printer]. 3 Connect the camera to a printer by Wi-Fi. ●●Select [Via Network] (420) or [Direct] (423), and then connect. 4 5 Select the destination printer. Select and print images. • The procedure for selecting images is the same as the one for when the USB connection cable is connected. (446) • To terminate the connection, press [ ]. • For details about PictBridge (wireless LAN-compatible) printers, contact their manufacturers.
14. Wi-Fi/Bluetooth [AV device] Still pictures and video can be sent to AV devices in the home (home AV devices), such as DLNA compatible recorders. Home AV device Wireless access point 1 Select the method for sending images on the camera. ●● [ ] [Wi-Fi] [Wi-Fi Function] [New Connection] [Send Images While Recording]/[Send Images Stored in the Camera] 2 Set the destination to [AV device]. 3 Connect the camera and PC by Wi-Fi. ●●Select [Via Network] (420) or [Direct] (423), and then connect.
14. Wi-Fi/Bluetooth 5 Check the send settings, and select [Set]. 6 When [Send Images While Recording] is selected: • To change the send setting, press the [DISP.]. (426) Take pictures. • [ ] is displayed in the recording screen of the camera while a file is being sent. • To end the connection, follow the steps below: [ ] [Wi-Fi] [Wi-Fi Function] [Yes] When [Send Images Stored in the Camera] is selected: Select an image. • To end the connection, select [Exit].
14. Wi-Fi/Bluetooth [Web service] You can use “LUMIX CLUB” to upload recorded images to web services such as social networking sites. Getting started: • Register with “LUMIX CLUB”. (430) • Before sending images to a service, register that web service. (432) 1 Select the method for sending images on the camera. ●● [ ] [Wi-Fi] [Wi-Fi Function] [New Connection] [Send Images While Recording]/[Send Images Stored in the Camera] 2 Set the destination to [Web service]. 3 Connect to the web service.
14. Wi-Fi/Bluetooth 6 When [Send Images While Recording] is selected: Take pictures. • [ ] is displayed in the recording screen of the camera while a file is being sent. • To end the connection, follow the steps below: [ ] [Wi-Fi] [Wi-Fi Function] [Yes] When [Send Images Stored in the Camera] is selected: Select an image. • To end the connection, select [Exit]. • If image sending fails, a report email outlining the failure will be sent to the email address registered in the “LUMIX CLUB”.
14. Wi-Fi/Bluetooth [Cloud Sync. Service] This camera can automatically transfer recorded images to a cloud sync service via “LUMIX CLUB” to send them to a PC or smartphone. To use [Cloud Sync. Service] (As of June 2020) • You need to register to the “LUMIX CLUB” (430) and set up cloud synchronization to send images to a cloud folder. To set up cloud synchronization, use “PHOTOfunSTUDIO”. • Sent images are temporarily saved in the cloud folder.
14. Wi-Fi/Bluetooth 3 Connect to the cloud sync service. ●●Select [Via Network] and then connect. (420) 4 Check the send settings and then press . • To change the send settings of images, press [DISP.]. (426) 5 When [Send Images While Recording] is selected: Take pictures. • [ ] is displayed in the recording screen of the camera while a file is being sent.
14. Wi-Fi/Bluetooth Wi-Fi Connections When [New Connection] has been selected in [Wi-Fi Function] in [Wi-Fi] of the [Setup] menu, select the connection method from either [Via Network] or [Direct] to connect. On the other hand, when you use [Select a destination from History] or [Select a destination from Favorite], the camera connects to the selected device with the previously-used settings. [Via Network] Connect the camera and destination device through the wireless access point.
14. Wi-Fi/Bluetooth [WPS (Push-Button)] Press the WPS button on the wireless access point to set up a connection. Example) Press the wireless access point WPS button until it switches to WPS mode. [WPS (PIN code)] Enter a PIN code into the wireless access point to set up a connection. On the camera screen, select the wireless access point you are connecting to. Enter the PIN code displayed on the camera screen into the wireless access point. Press of the camera.
14. Wi-Fi/Bluetooth [From List] Searches for a wireless access point to use, and connects to this. • Confirm the encryption key of the wireless access point. Select the wireless access point you are connecting to. • Press [DISP.] to run a wireless access point search again. • If no wireless access point is found, refer to “Connecting by Manual Input” on page 422. (If network authentication is encrypted) Enter the encryption key.
14. Wi-Fi/Bluetooth [Direct] Directly connect the camera and the destination device. Select the method for connecting with the destination device. [WPS Connection] [WPS (PushButton)] Press the WPS button on the destination device to connect. • On the camera, press [DISP.] to extend the connection wait time. [WPS (PIN code)] Enter the PIN code into the camera, and connect. Search for the camera on the destination device to connect. Enter the SSID and password displayed on the camera into the device.
14. Wi-Fi/Bluetooth Connect to Wi-Fi Using Previously Saved Settings Use the Wi-Fi connection history to connect using the same settings as previously. 1 Display the Wi-Fi connection history. ●● [ ] [Wi-Fi] [Wi-Fi Function] [Select a destination from History]/[Select a destination from Favorite] 2 Select the History item to connect to. • Press [DISP.] to confirm details of the connection history. Register to Favorite You can register the Wi-Fi connection history to Favorite.
14. Wi-Fi/Bluetooth Editing Items Registered in Favorite Display items registered to Favorite. • [ ] [Wi-Fi] [Wi-Fi Function] [Select a destination from Favorite] Select the History item to edit in Favorite and then press [Remove from Favorite] . — [Change the Order in Favorite] Specify the destination location of the desired item to change the display order. [Change the Registered Name] Enter characters to change the registered name.
14. Wi-Fi/Bluetooth Send Settings and Selecting Images Image Send Settings Set the size, file format, and other items for sending the image to the destination device. 1 After Wi-Fi connection, the send settings confirmation screen will be displayed, so press [DISP.]. 2 Change the send settings.
14. Wi-Fi/Bluetooth [Size] Resize the image to send. [Original]/[Auto]/[Change] ([M], [S], or [VGA]) • The [Auto] image size changes depending on the status of the destination device. (This can be set when the destination is [Web service]) [File Format] Sets the file format of images to send. [JPG]/[RAW+JPG]/[RAW] • This setting is possible when the destination supports the sending of RAW images from this camera.
14. Wi-Fi/Bluetooth Selecting Images When sending by [Send Images Stored in the Camera], select the images using the following procedure. 1 2 Select [Single Select] or [Multi Select]. Select the image. [Single Select] setting Press Press to select an image. . Set [Multi Select] setting Press then press to select an image and . (Repeat this) • To cancel the setting, press Press [DISP.] to execute. again.
14. Wi-Fi/Bluetooth [Wi-Fi Setup] Menu This configures the settings required for the Wi-Fi function. The settings cannot be changed when connected to Wi-Fi. Displaying the [Wi-Fi Setup] menu. ●● [ ] [Wi-Fi] [Wi-Fi Setup] [Priority of Remote Device] This sets either the camera or the smartphone as the priority control device to be used during remote recording. (390) [Wi-Fi Password] You can use a password to connect for enhanced security.
14. Wi-Fi/Bluetooth [Wi-Fi Function Lock] To prevent incorrect operation and use of the WiFi function by a third party and to protect personal information in the camera and included with images, protect the Wi-Fi function with a password. [Setup]: Enter any 4-digit numbers as the password. [Cancel]: Cancel the password. • Once a password is set, you are required to enter it each time you use the Wi-Fi function.
14. Wi-Fi/Bluetooth Acquire a New Login ID from the Camera From the camera menu, acquire a “LUMIX CLUB” login ID. Follow the menu path. • [ ] [Wi-Fi] [Wi-Fi Setup] [LUMIX CLUB] [Set/Add Account] [New account] • Connect to the network. Proceed to the next page by selecting [Next]. Select and set the method for connecting to a wireless access point, and set. (420) • Except for the first-time connection, the camera will connect to the previouslyused wireless access point.
14. Wi-Fi/Bluetooth Register a Web Service with “LUMIX CLUB” • Confirm web services supported by “LUMIX CLUB” in “FAQ/Contact us” at the following site: https://lumixclub.panasonic.net/eng/c/lumix_faqs/ Getting started: • Make sure that you have created an account on the web service you want to use, and have the login information available. Connect to the “LUMIX CLUB” site using a smartphone or PC. https://lumixclub.panasonic.net/eng/c/ Enter your “LUMIX CLUB” login ID and password to log in.
14. Wi-Fi/Bluetooth Checking the “LUMIX CLUB” Terms of Use Check the details if the terms of use have been updated, for example. [ ] [Wi-Fi] [Wi-Fi Setup] [LUMIX CLUB] Select [Terms of use] Deleting Your Login ID and Closing Your “LUMIX CLUB” Account Delete the login ID from the camera when transferring it to another party or disposing of it. You can also close your “LUMIX CLUB” account. • You can only change or delete the login ID acquired with the camera. Follow the menu path.
15. Connecting to Other Devices This chapter describes connections with other devices, such as TVs and PCs. [HDMI] socket Connect the camera and TV with a commercially available HDMI micro cable. • Use a “High Speed HDMI micro cable” with the HDMI logo. Cables that do not comply with the HDMI standards will not work. “High Speed HDMI micro cable” (Type D - Type A plug, up to 2 m (6.
15. Connecting to Other Devices [USB/CHARGE] socket Use a USB connection cable to connect the camera to a PC, recorder, or printer. • Do not use any other USB connection cables except the supplied one. • Check the direction of the terminals and plug in/out straight holding onto the plug. (Inserting these at an angle may cause deformation or malfunction) • Do not connect the cable to the wrong terminals. This may cause a malfunction.
15. Connecting to Other Devices Viewing on a TV You can connect the camera to a TV to view recorded pictures and videos on the TV. Getting started: • Turn off the camera and TV. 1 Connect the camera and TV with a commercially available HDMI micro cable. (434) 2 3 4 5 Turn on the TV. Switch the TV input to HDMI input. Turn on the camera. Display the playback screen. ●●Press [ ]. ●●The recorded images are displayed on the TV. (The monitor and viewfinder of the camera will turn off.
15. Connecting to Other Devices • With the default settings, pictures are output at the optimal resolution for the connected TV. The output resolution can be changed in [HDMI Mode (Play)]. (359) • To play back 24p videos, set [HDMI Mode (Play)] to [AUTO]. Otherwise, the picture is not output at 24 frames per second. • Depending on the aspect ratio, gray bands may be displayed on the top and bottom or the left and right of images. • Wi-Fi connection is not available while using the HDMI output.
15. Connecting to Other Devices Connect the camera to a Panasonic TV compatible with VIERA Link using a commercially available HDMI micro cable. (434) Turn on the camera. Turn on the VIERA Link. • [ ] [TV Connection] [VIERA Link] [ON] Display the playback screen. • Press [ ]. Operate with the remote control for the TV. Power off link If you turn off the TV with its remote control, the camera will also turn off.
15. Connecting to Other Devices Recording while monitoring camera images When using the HDMI output, you can take pictures while monitoring the camera image on a TV, etc. • The monitor and viewfinder of the camera will turn off. ] or MF assist, the screen cannot be enlarged • When using the AF mode [ in windowed mode. • The aspect ratio setting is fixed to [16:9]. • An electronic sound or shutter sound will not sound. • Wi-Fi connection is not available while using the HDMI output.
15. Connecting to Other Devices Importing Images to a PC If you connect the camera to a PC, you can copy the recorded images to the PC. • When using Windows, you can also copy using the “PHOTOfunSTUDIO” software for LUMIX. (443) • When using Mac, you can copy using “iMovie”. For details about iMovie, please contact Apple Inc. Copying Images to a PC • The camera can be connected to a PC running any of the following OSs which can detect mass storage devices. Supported OS Windows: Windows 10/Windows 8.
15. Connecting to Other Devices Folder Structure Inside Card LUMIX DCIM 100XXXXX DCIM: Images Folder number Color space PXXX0001.
15. Connecting to Other Devices Copying Images to a PC Using “PHOTOfunSTUDIO” Getting started: • Turn on the camera and PC. • Install “PHOTOfunSTUDIO” on PC. (442) Connect the camera and PC with the USB connection cable. (435) Press to select [PC(Storage)] and then press . Copy images to the PC using “PHOTOfunSTUDIO”. • Do not delete or move the copied files and folders in, for example, Windows Explorer. Playback and editing using “PHOTOfunSTUDIO” will become no longer possible.
15. Connecting to Other Devices PHOTOfunSTUDIO 10.0 AE This software allows you to manage your images. For example, it allows you to import pictures and videos to your PC and then sort them by recording date, model name. You can also perform operations such as writing images to a DVD, correcting images, and editing videos. Check the following site and then download and install the software: https://panasonic.jp/support/global/cs/soft/download/d_pfs10ae.
15. Connecting to Other Devices SILKYPIX Developer Studio SE This software processes and edits RAW images. Edited images can be saved in a format (JPEG, TIFF, etc.) that can be displayed on a PC. Check the following site and then download and install the software: http://www.isl.co.jp/SILKYPIX/english/p/ Operating environment Windows Windows 10 (64-bit recommended) Windows 8.1 (64-bit recommended) Mac OS X v10.10 to v10.11 macOS 10.12 to macOS 10.
15. Connecting to Other Devices Storing on a Recorder By connecting the camera to a Panasonic Blu-ray disc recorder or DVD recorder, you can store the pictures and videos. Getting started: • Turn on the camera and recorder. 1 Connect the camera and recorder with the USB connection cable. (435) 2 3 Press to select [PC(Storage)] and then press . Operate the recorder to store the images.
15. Connecting to Other Devices Printing If you connect the camera to a printer that supports PictBridge, you can select pictures on the camera’s monitor and then print them. Getting started: • Turn on the camera and printer. • Set the print quality and other settings on the printer. 1 Display the playback screen. ●●Press [ ]. 2 Connect the camera and printer with the USB connection cable. (435) 3 4 Press to select [PictBridge(PTP)] and then press . Press to select a picture and then press .
15. Connecting to Other Devices 5 Set the print settings. [Print with Date] Sets printing with date. • If the printer does not support printing with date, the date cannot be printed. [Num.of prints] Sets the number of prints to be printed (up to 999). [Paper Size] [Page Layout] 6 Sets the paper size. Sets whether to add borders and how many images to be printed on each sheet of paper. Start printing. ●●Select [Print start] and then press .
15. Connecting to Other Devices • If [USB Mode] is set to [PictBridge(PTP)] in the [Setup] menu, the camera will be automatically connected to the printer without the [USB Mode] selection screen being displayed. (359) • Take care not to turn off the camera while printing is in progress. • Do not disconnect the USB connection cable while [ ] (Cable disconnect prohibit icon) is displayed. • Disconnect the USB connection cable after printing.
16. Materials Using Optional Accessories • For information on the tripod grip, refer to page 72. External Flash (optional) After attaching the flash (DMW-FL580L, DMW-FL360L, DMW-FL200L: optional), the effective range will be increased when compared to the camera’s built-in flash. 1 2 Close the built-in flash and set the Camera on/off switch to [OFF]. Attach the external flash to the hot shoe and then turn on the camera and the external flash.
16. Materials • When an external flash is attached, do not carry the camera by holding only the external flash. It may become detached. • When using a commercially available external flash, do not use one with reversed polarity or function for communicating with a camera. It may cause the camera to malfunction, or it may not operate correctly.
16. Materials • While the external microphone is connected, [ ] is displayed on the screen. Make sure that the external microphone is connected properly before you start recording. • Do not use the stereo microphone cables with the length of 3 m (9.8 feet) or more. • When an external microphone is connected, [Sound Rec Level Disp.] automatically turns [ON], and the recording level is displayed on the screen.
16. Materials Setting the Sound Pickup Range (DMW-MS2: Optional) When the Stereo Shotgun Microphone (DMW-MS2: optional) is connected, you can set the microphone sound pickup range. Select [Special Mic.]. ●● [ ] [Special Mic.] [STEREO] [LENS AUTO] [SHOTGUN] [S.SHOTGUN] [MANUAL] Picks up sound over a wide area. Picks up sound from a range automatically set by the lens angle of view. Helps prevent picking up background noise, and records sound from a specific direction.
16. Materials AC Adaptor (Optional)/DC Coupler (Optional) With an AC Adaptor (DMW-AC10: optional) and DC Coupler (DMWDCC11: optional), you can perform recording and playback without worrying about the remaining battery charge. • Be sure to purchase both an AC Adaptor and a DC Coupler as a set. They cannot be used independently of one another. • When the DC Coupler is being mounted, the DC Coupler cover opens, so the structure ceases to be dust and splash resistant.
16. Materials Monitor/Viewfinder Displays • The screen is an monitor display example of when [LVF/Monitor Disp. Set] is set ]. to [ Recording Screen 60p [S&Q Effect] (256) Recording mode (54) AFS AFF AFC MF Focus mode (126, 148) Focus Bracket (201) AFL AF Lock (212) Photo Style (223) AF mode (131) Flash mode (229) [Face Recog.
16.
16.
16.
16. Materials Monitor recording information screen 1/60 F3.5 Recording mode (54) [Aspect Ratio] (119)/ [Picture Size] (120) 1/60 Shutter speed (52) [S&Q Effect] (256) F3.5 Aperture value (52) Wi-Fi/Bluetooth connection state (373) Battery indication (35) Fn button settings (294) ISO sensitivity (214) Exposure compensation value (210)/ Manual Exposure Assist (101) Flash setting (233, 234, 236)/ Flash mode (229) Photo Style (223) AWB [i.
16. Materials Playback Screen 15 pic.
16. Materials Clear Retouch completed icon (286) Name*1 (351, 353) Obtaining information Location*1 (355) Title*1 (365) Playback (Video) (274) Age in years/months (351, 353) Travel elapsed days 1ST DAY (355) Recording information Group images (280) Silent mode (203) *1 It is displayed in order of [Title], [Location], [Name] ([Baby1]/[Baby2], [Pet]), [Name] ([Face Recog.]).
16. Materials Detailed information display Photo style, Highlight shadow display 1/5 3/5 Standard Contrast Sharpness Noise Reduction Saturation 2020.12.1 10:00 100-0001 2020.12.1 10:00 100-0001 Recording information (basic) Recording date and time (47) Folder/file number (441) Recording information (advanced) White balance display G A 2020.12.1 10:00 100-0001 Histogram display R B M Lens information display 2/5 LUMIX G VARIO 12-32 5/5 /F3.5-5.
16. Materials Message Displays Meanings of main messages displayed on the camera screen, and response methods. Card [Memory Card Error]/[Format this card?] • It is a format that cannot be used with the camera. Either insert another card, or back up any necessary data before formatting. (40) [Memory Card Error]/[This memory card cannot be used] • Use a card compatible with the camera. (24) [Insert SD card again]/[Try another card] • Unable to access the card. Reinsert the card.
16. Materials Lens [The lens is not attached properly. Do not push lens release button while lens is attached.] • Remove the lens once, and then attach it again without pressing the lens release button. (41) Turn on the camera again, and if it is still displaying, contact the dealer. [Lens attachment failed. Please make sure the lens is attached correctly.] • Remove the lens from the camera body and gently wipe the contacts on the lens and the camera body using a dry cotton swab.
16. Materials Others [Some pictures cannot be deleted]/[This picture cannot be deleted] • Images that do not comply with the DCF standard cannot be deleted. Back up any necessary data before formatting the card. (40) [A folder cannot be created] • The maximum number of folder numbers has been reached, so new folders cannot be created. Back up any necessary data before formatting the card. (40) After formatting, execute [No.Reset] in the [Setup] menu to reset the folder number to 100.
16. Materials Troubleshooting First, try out the following procedures (465 to 475). If the problem is not resolved, it may be improved by selecting [Reset] (69) on the [Setup] menu. Power, Battery The camera turns off automatically. • [Economy] is enabled. (37) The battery becomes flat too quickly. • When [4K Pre-Burst] or [Pre-Burst Recording] is set, the battery drains faster. Set these settings only when recording. • When connected to Wi-Fi, the battery drains quickly.
16. Materials Cannot record images. The shutter will not operate immediately when the shutter button is pressed. • If [Focus/Release Priority] is set to [FOCUS], then recording will not take place until focus is achieved. (336) The recorded image is whitish. • Images may look whitish when the lens or image sensor gets dirty with fingerprints or similar. If the lens is dirty, turn the camera off, then wipe the lens surface with a soft, dry cloth.
16. Materials The recorded image looks rough. Noise appears on the picture. • Try the following: –– Reduce the ISO sensitivity. (214) –– Increase [Noise Reduction] of [Photo Style] to the positive direction, or adjust each item other than [Noise Reduction] to the negative direction. (224) –– Set [Long Shtr NR] to [ON]. (322) The subject appears distorted on the image.
16. Materials The brightness or coloring of the recorded image is different from the actual scene. • When recording under lighting such as fluorescent or LED lighting, increasing the shutter speed may introduce slight changes to brightness or coloring. These are a result of the characteristics of the light source and do not indicate a malfunction.
16. Materials In videos, abnormal clicking and buzzing sounds are recorded. The recorded audio is very quiet. • Depending on the recording conditions or the lens used, the sound of aperture and focus actions may be recorded in videos. You can set the focus operation during video recording to [OFF] in [Continuous AF] (261). • Do not block the microphone hole during video recording. An operation sound is recorded in a video.
16. Materials Playback Cannot play back. There are no recorded pictures. • Folders and images processed on a PC cannot be played on the camera. We recommend using the software “PHOTOfunSTUDIO” to write images from the PC to the card. • Some images are not displayed when the [Playback Mode] is set. Set to [Normal Play]. (363) Red part of the recorded image has changed color to black. • When Red-Eye Removal ([ ] or [ ]) is performed, red parts may be corrected to black.
16. Materials Flash The flash does not fire. • The flash becomes unavailable in the following cases. –– The flash is closed. ] (Forced Flash Off).
16. Materials Wi-Fi Function A Wi-Fi connection cannot be established. Radio waves get disconnected. Wireless access point is not displayed. General tips for using a Wi-Fi connection • Use within the communication range of the device to be connected. • Usage near devices that utilize the 2.4 GHz frequency such as microwave ovens and cordless telephones may result in the radio wave being lost. Use the camera at a sufficient distance from these devices.
16. Materials Connection to a wireless access point cannot be established. • The wireless access point information set on the camera is wrong. Check the authentication type and encryption key. (422) • Radio waves from other devices may block the connection to a wireless access point. Check the status of other devices that are connected to the wireless access point as well as the status of other wireless devices. (iOS devices) Wi-Fi connection attempt fails.
16. Materials The PC is not recognized when I use a Wi-Fi connection. The camera cannot be connected to the PC using the Wi-Fi function. • At the time of purchase, this camera is set to use a workgroup name of “WORKGROUP”. If you have changed the workgroup name of the PC, this will not be recognized. In the [Wi-Fi Setup] menu, [PC Connection], change the workgroup name of the PC to which to connect. (429) • Check that the login name and password are correctly typed.
16. Materials TV, PC, Printer No image on the TV. The TV screen is blurry or not colored. • Confirm the connection with the TV. (436) VIERA Link is not working. • Check that the [VIERA Link] of the camera is set to [ON]. (360) • Check the VIERA Link setting on the connected device. • Turn off and on the camera. Cannot communicate with the PC. • Set the [USB Mode] of the camera to [PC(Storage)]. (359) • Turn the camera off and on. Cannot print when the camera is connected to a printer.
16. Materials Cautions for Use The camera Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). • If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation. • Do not use this unit near cell phones because doing so may result in noise adversely affecting the pictures and/or sound.
16. Materials Do not spray the camera with insecticides or volatile chemicals. • If the camera is sprayed with such chemicals, the body of the camera may be damaged and the surface finish may peel off. Do not keep products made of rubber, PVC or similar materials in contact with the camera for a long period of time. Cleaning Before cleaning the camera, remove the battery or the DC Coupler, and disconnect the power plug from the electrical outlet. Then wipe the camera with a dry, soft cloth.
16. Materials Removing dirt on the image sensor The image sensor is very precise and delicate, so be sure to observe the following when you do have to clean it yourself. • Blow dust off the surface of the image sensor using a commercially available blower. Do not blow the dust off with excessive power. • Do not put the blower brush further inside than the lens mount as the image sensor may get scratched. • Do not use any objects except a blower brush to clean the image sensor.
16. Materials Lens • Do not press the lens with excessive force. • Do not leave the camera with the lens facing the sun as rays of light from the sun may cause it to malfunction. Also, be careful when placing the camera outside or near a window. • When there is dirt (water, oil, and fingerprints, etc.) on the surface of the lens, the picture may be affected. Lightly wipe the surface of the lens with a soft, dry cloth before and after taking pictures. • Do not place the lens mount facing downwards.
16. Materials Battery The battery is a rechargeable lithium ion battery. It is highly sensitive to temperature and humidity, and the effect on performance increases as the temperature rises or drops. Keep the contacts clean. of the charger and battery • Wipe them with a dry cloth if they get dirty. Always remove the battery after use. • Place the removed battery in a plastic bag, etc., and keep away from metallic objects (clips, etc.) for storage or transport.
16. Materials AC Adaptor • The [CHARGE] light may blink under the influence of static electricity or electromagnetic wave, depending on the charging environment. This phenomenon has no effects on charging. • If you use the AC adaptor near a radio, the radio reception may be disturbed. Keep the AC adaptor 1 m (3.3 feet) or more away from radio. • During usage, the AC adaptor may emit an electrical hum; this is not a malfunction.
16. Materials Personal Information Personal information is stored within the camera and in recorded images. We recommend that you enhance security by setting a Wi-Fi password and Wi-Fi function lock to protect personal information. (429, 430) • Images may contain information that can be used to identify the user, such as recording dates and times, and location information. Confirm details carefully before uploading images to a web service.
16. Materials When Not Using the Camera for a Long Period of Time • Ensure you remove the battery and card from the camera. If the battery is left in the camera, it may over-discharge, and be rendered unusable even after charging. • Store the battery in a cool and dry place with a relatively stable temperature.
16. Materials Shoulder Strap • If you attach a heavy interchangeable lens to the camera body, do not carry the camera by the shoulder strap. Hold the camera and the lens when carrying them. Wi-Fi Function Use the camera as a wireless LAN device When using devices or computer systems that require more reliable security than wireless LAN devices, ensure that the appropriate measures are taken for safety designs and defects for the systems used.
16. Materials Do not connect to the wireless network you are not authorized to use When the camera utilizes its wireless LAN function, wireless networks (SSID) that you are not authorized to use may be displayed, however do not attempt to connect to the network as it may be considered as an unauthorized access.
16. Materials Number of Pictures That Can Be Taken and Available Recording Time with the Battery Listed below are the numbers of pictures that can be taken and the time lengths available for recording when the supplied battery is being used. • The number of pictures that can be taken is according to the CIPA (Camera & Imaging Products Association) standards. • Using a Panasonic SDHC memory card. • The values listed are approximate.
16. Materials Recording Videos (When Using the Monitor) • Recording with picture quality set to [4K/100M/30p] or [4K/100M/25p]. When the interchangeable lens (H-FS12032) is used Continuous available recording time (minutes) 80 Actual available recording time (minutes) 40 When the interchangeable lens (H-FS35100) is used Continuous available recording time (minutes) 70 Actual available recording time (minutes) 35 • Recording with picture quality set to [FHD/28M/60p] or [FHD/28M/50p].
16. Materials Playback (When Using the Monitor) When the interchangeable lens (H-FS12032) is used Playback time (minutes) 220 When the interchangeable lens (H-FS35100) is used Playback time (minutes) 210 • The number of pictures that can be taken and the available recording time vary depending on the surrounding environment and the usage conditions. For example, these will reduce in the following case: –– When the flash is used repeatedly. –– In low-temperature environments, such as on ski slopes.
16. Materials Number of Still Images That Can Be Taken and Video Recording Time with Cards Listed below are the numbers of pictures and the time lengths of videos that can be recorded on a card. • The values listed are approximate.
16. Materials List of Functions That Can Be Set in Each Recording Mode Menu [Rec] menu [Aspect Ratio] [Picture Size] [Quality] [Focus Mode] [AF Sensitivity(Photo)] [Photo Style] [Filter Effect] [Filter Settings] [Simultaneous Record w/o Filter] [Color Space] [Metering Mode] [Highlight Shadow] [i.Dynamic] [i.Resolution] [Flash] [Flash Mode] [Flash Synchro] [Flash Adjust.] [Auto Exposure Comp.
16. Materials Menu [ISO Sensitivity (photo)] [ISO Auto Lower Limit Setting] [ISO Auto Upper Limit Setting] [Min. Shtr Speed] [Long Shtr NR] [Shading Comp.] [Diffraction Compensation] [Stabilizer] [Operation Mode] [E-Stabilization (Video)] [Ex. Tele Conv.] ([Rec]) [Digital Zoom] (DC-G100 only) [Burst Rate] [4K PHOTO] [Rec Method] [Pre-Burst Recording] [Self Timer] [Time Lapse Shot] [Stop Motion Animation] [Live View Composite] [Silent Mode] [Shutter Type] [Shutter Delay] [Bracket] [HDR] [Multi Exp.
16. Materials Menu [Motion Picture] Menu [Rec Quality] [Snap Movie] [Focus Mode] [Continuous AF] [AF Custom Setting(Video)] [Photo Style] [Filter Effect] [Filter Settings] [Simultaneous Record w/o Filter] [Luminance Level] [Metering Mode] [Highlight Shadow] [i.Dynamic] [i.Resolution] [ISO Sensitivity (video)] [ISO Auto Lower Limit Setting] [ISO Auto Upper Limit Setting] [Diffraction Compensation] [Stabilizer] [Operation Mode] [E-Stabilization (Video)] [Flkr Decrease] [Ex. Tele Conv.
16. Materials Menu [Wind Cut]*1 [Lens Noise Cut]*2 [Built-in Mic] [Built-in Mic Indicator] [Special Mic.]*3 *1 This item is available only when using an external microphone (optional). *2 This item is available only when using an interchangeable lens supporting power zoom. *3 This item is available only when using stereo shotgun microphone (DMW-MS2: optional).
16. Materials Specifications The specifications are subject to change for performance enhancement. Digital camera body (DC-G100/DC-G110): Information for your safety Power source: 8.4 V Power consumption: 2.9 W (when recording with the monitor), 2.0 W (when playing back with the monitor) 2.9 W (when recording with the monitor), 2.
16.
16. Materials Monitor System Aspect ratio 3:2, 3.0 inches, approx. 1,840,000 dots monitor, capacitive touch screen (field of view ratio about 100%) Focus AF type TTL type based on image detection (Contrast AF) Focus mode AFS / AFF / AFC / MF AF mode Face/Eye Detection, Tracking, 49-area-focusing, Custom Multi, 1-area-focusing, Pinpoint-focusing (Focus area selection is possible by touching.
16. Materials Shutter Format Electronically-controlled, Single curtain focal-plane shutter Shutter speed Pictures: Electronic front curtain: Time (max. approx.
16. Materials Flash Flash TTL AUTO Built-in pop up flash GN 5.1 equivalent (ISO200·m) [GN 3.6 equivalent (ISO100·m)] Flash mode Auto, Auto/Red-Eye, Forced Flash On, Forced On/Red-Eye, Slow Sync., Slow Sync./Red-Eye, Forced Flash Off Flash synchronization speed Flash range Equal to or smaller than 1/50 of a second Approx. 0.4 m (1.3 feet) to 4.1 m (13 feet) Approx. 0.9 m (3.0 feet) to 3.
16. Materials External dimensions / Mass External dimensions Approx. 115.6 mm (W)×82.5 mm (H)×54.2 mm (D) (4.55″ (W)×3.24″ (H)×2.13″ (D)) (excluding the projecting parts) Mass Approx. 345 g/0.76 lb (with one card and the battery) Approx. 303 g/0.
16. Materials Interchangeable Lens H-FS12032 “LUMIX G VARIO 12–32 mm/F3.5–5.6 ASPH./ MEGA O.I.S.” H-FS35100 “LUMIX G VARIO 35–100 mm/F4.0–5.6 ASPH./MEGA O.I.S.” Focal length f=12 mm to 32 mm (35 mm film camera equivalent: 24 mm to 64 mm) f=35 mm to 100 mm (35 mm film camera equivalent: 70 mm to 200 mm) Aperture type 7 diaphragm blades/circular aperture diaphragm 7 diaphragm blades/circular aperture diaphragm Maximum aperture F3.5 (Wide) to F5.6 (Tele) F4.0 (Wide) to F5.
16. Materials Recommended operating temperature 0 °C to 40 °C (32 °F to 104 °F) 0 °C to 40 °C (32 °F to 104 °F) Permissible relative humidity 10%RH to 80%RH 10%RH to 80%RH Tripod grip: DMW-SHGR1 Carrying capacity (Total mass of the loading camera body, lens, battery, and other attached accessories) Maximum 1.2 kg/2.65 lb External dimensions (Legs folded) Approx. 53.7 mm (W)×144.7 mm (H)×45.5 mm (D) (2.11″ (W)×5.70″ (H)×1.
Index Numerics 1-Area (AF)......................................... 141 49-Area (AF)....................................... 137 4K Burst.............................................. 165 4K Burst (Wide-angle).......................... 90 4K burst files....................................... 170 4K Burst (S/S).................................... 165 4K Live Cropping........................ 249, 314 4K PHOTO................................. 164, 323 4K PHOTO Bulk Saving............. 177, 366 4K PHOTO Play.
Index C Calendar Playback............................. 279 Card........................................ 24, 39, 481 Center Marker.................................... 346 Center-weighted metering.................. 209 Charge.................................................. 31 Cinelike D........................................... 223 Cinelike V........................................... 223 Cleaning............................................. 477 Clear Night Portrait..............................
Index Exposure Compensation Display Setting ........................................................... 339 Exposure Compensation Reset.......... 333 Exposure Meter.................................. 347 Exposure Mode.......................... 246, 314 Expressive...........................................114 Extended ISO..................................... 333 Extended Tele Conversion ........................................... 154, 323, 331 External flash......................................
Index i.ISO................................................... 215 i.Resolution......................................... 319 iHandheld Night Shot................... 81, 314 iHDR............................................. 81, 314 Image Quality..................................... 224 Image Stabilizer.......................... 206, 323 Impressive Art......................................114 Intelligent Auto menu.......................... 314 Intelligent Auto mode............................
Index N Natural (Photo Style).......................... 223 Network Address................................ 430 No.Reset.................................... 125, 361 Noise Reduction................................. 224 Number of pictures that can be taken ........................................................... 486 Number of pictures that can be taken continuously....................................... 162 Number of prints................................. 447 Number of still images that can be taken ..
Index Red-Eye Removal...................... 235, 321 Register to Favorite (Wi-Fi connection).............................. 424 Relaxing Tone......................................110 Remaining display.............................. 348 Remote shooting................................ 389 Remote Wakeup......................... 356, 398 Reset............................................ 69, 361 Reset Network Settings...................... 361 Resize................................................
Index T T (Time).............................................. 102 Text Stamp......................................... 367 Thumbnail screen............................... 278 Time Lapse Video............................... 370 Title Edit.............................................. 365 Touch AE.............................................. 71 Touch AF.............................. 70, 144, 341 Touch Pad AF............................. 146, 341 Touch screen........................................
Trademarks and Licenses • Micro Four Thirds™ and Micro Four Thirds Logo marks are trademarks or registered trademarks of Olympus Corporation, in Japan, the United States, the European Union and other countries. • Four Thirds™ and Four Thirds Logo marks are trademarks or registered trademarks of Olympus Corporation, in Japan, the United States, the European Union and other countries. • SDXC Logo is a trademark of SD-3C, LLC.
Trademarks and Licenses • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. • The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance®. • The Wi-Fi Protected Setup™ Logo is a certification mark of Wi-Fi Alliance®. • “Wi-Fi®” is a registered trademarks of Wi-Fi Alliance®.
Trademarks and Licenses This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC Video. No license is granted or shall be implied for any other use.
Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
