User manual

73
4. Focus, Brightness (Exposure) and Colour tone Settings
Adjusting the White Balance
Applicable modes:
In sunlight, under incandescent lights or in other such conditions where the colour of white
takes on a reddish or bluish tinge, this item adjusts to the colour of white which is closest
to what is seen by the eye in accordance with the light source.
1
Select the menu.
2
Press 2/1 to select the White Balance.
¢ [AWB] is applied when you record motion picture or perform recording with the 4K
Photo or Post Focus function.
3
Press [MENU/SET] to set.
> [Rec] > [White Balance]
[AWB] Automatic adjustment
[V] When taking pictures outdoors under a clear sky
[Ð] When taking pictures outdoors under a cloudy sky
[î] When taking pictures outdoors in the shade
[Ñ] When taking pictures under incandescent lights
[]
¢
When taking pictures with the flash only
[Ò]
Set the White Balance value. Use to match the
condition when taking photographs.
1 Press 3.
2 Place a white object such as a piece of paper
within the frame at the centre of the screen, and
press [MENU/SET].
• This will set the White Balance and return you to the recording screen.
• The same operation can be performed by pressing the shutter button.
• White Balance may not be set when the subject is too bright or too dark.
Set the White Balance again after adjusting to appropriate brightness.
MENU
WB
WBWBWB
WBWBWBWBWBWBWB
AWB
AWB