User manual
Table Of Contents
- Finding the information you need
- How to use this manual
- Contents
- Contents by Function
- 1. Before Use
- 2. Getting Started/Basic Operations
- 3. Recording Modes
- Taking Pictures using the Automatic Function (Intelligent Auto Mode)
- Taking Pictures with Automatically Adjusted Aperture and Shutter Speed (Programme AE Mode)
- Taking picture by setting the exposure manually (Manual Exposure Mode)
- Taking Pictures with different image effects (Creative Control Mode)
- Taking Pictures that match the Scene being recorded (Scene Guide Mode)
- Take the Outdoors Scene Expressively
- Taking panorama pictures (Panorama Shot Mode)
- 4. Focus, Brightness (Exposure) and Colour tone Settings
- 5. 4K Photo and Drive Settings
- 6. Stabiliser, Zoom and Flash
- 7. Recording Motion Pictures
- 8. Sensor
- 9. Playing Back and Editing Images
- 10. Using Menu Functions
- 11. Using the Wi-Fi function
- 12. Connecting to other equipment
- 13. Others
13. Others
182
[To prevent water leakage, ensure that the door is locked properly.]
• Refer to “About the water leakage warning message” on P21 for details.
[Failed to connect wireless access point]/[Connection failed]/[No wireless access
point found]
• The wireless access point information set on this unit is wrong.
Check the authentication type, encryption type, and encryption key. (P166)
• Radio waves from other devices may block the connection to a wireless access point.
Check other devices that are connected to the wireless access point and devices that use the
2.4 GHz band.
[Connection error]/[Connection failed]
• Radio waves from the wireless access point are getting weak.
Perform the connection closer to the wireless access point.
• Depending on the wireless access point, connection may be automatically disconnected after
specific time has passed.
Reconnect the connection again.
[Connection failed]
• Change the access point to connect to in the smartphone Wi-Fi settings to this camera.