VQT0Q47Eng.book 1 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Operating Instructions SD Multi Camera Model No. SV-AS3 Before use, please read these instructions completely.
VQT0Q47Eng.book 2 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Contents Preparation Playback Information for Your Safety............... 4 Introduction ....................................... 6 Accessories ...................................... 8 Suitable Card .................................... 9 Controls Layout............................... 10 Inserting/Removing the Battery or the Card .................................. 12 Charging the Battery....................... 14 Turning This Unit On.......................
VQT0Q47Eng.book 3 ページ ２００４年１１月２６日 Connecting to PC Operating Environment of the Software ............................ Before Connecting to a PC for the First Time (Installation) ...... Installing the USB Driver ................. Installing SD Viewer ........................ Installing SD-Jukebox ..................... Connecting to a PC ......................... Checking that This Unit Is Properly Recognised by the PC..... Disconnecting the USB Cable Safely...........................................
VQT0Q47Eng.book 4 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Preparation Information for Your Safety WARNING TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES AND DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.
VQT0Q47Eng.book 5 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 IMPORTANT Please respect all copyrights. Whatever you have recorded and created can be used for your personal entertainment only. Under copyright laws, other materials cannot be used without obtaining permission from the holders of the copyrights. ≥ Injury or material damage resulting from any kind of use that is not in accordance with the operating instructions are the sole responsibility of the user.
VQT0Q47Eng.book 6 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Preparation (continued) Introduction Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic SD Multi Camera. Please read these Operating Instructions carefully and keep them handy for future reference. ≥ SD logo is a trademark. ≥ MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia.
VQT0Q47Eng.book 7 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 ≥ Music recognition technology and related data are provided by Gracenote and the Gracenote CDDB music recognition service. Gracenote is the industry standard in music recognition technology and related content delivery. For more information visit www.gracenote.com. ≥ CD and music-related data from Gracenote, Inc., copyright C 2000– 2003 Gracenote. Gracenote CDDB® Client Software, copyright 2000–2003 Gracenote.
VQT0Q47Eng.book 8 ページ ２００４年１１月２６日 金曜日 Preparation (continued) Accessories Check the accessories before using this unit. SD Memory Card is not included.
VQT0Q47Eng.book 9 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 ∫ Optional Accessory ≥ Battery Pack (CGA-S302E/1B) Suitable Card ≥ The card suitable for this unit is SD Memory Card. (MultiMediaCard is not suitable.) ≥ We recommend using Panasonic SD Memory Card. ∫ About SD Memory Card (optional) ≥ The SD Memory Card is a small, lightweight and removable external card. The SD Memory Card is equipped with a write-protect switch 1 that can inhibit writing and formatting.
VQT0Q47Eng.book 10 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Preparation (continued) Controls Layout ∫ Body 1 2 3 4 6 7 8 9 5 1 2 3 4 5 6 7 Lens Strap Attachment Microphone (P28) Self-timer Lamp (P36) Flash LCD Monitor (P92) Jog Ball (P18) • It is used for setting the menu, playing files, zooming, etc. • It blinks (lights) in red (Recording Mode) or green (Playback Mode) when you switch the mode, operate the menu or turn this unit on.
VQT0Q47Eng.book 11 ページ ２００４年１１月２６日 19 20 21 22 23 1 2 6 3 4 5 7 午前１０時１２分 Battery Lock [OPEN] (P12) Card Slot (P13) Card/Battery Door (P12) Lock Release Lever (P13) Battery Slot (P13) ∫ Remote Controller (P27, 61) 1 Stereo Earphone Socket 2 Volume Button [s VOL r] 3 Playback/Stop Button [1/∫] Shutter Button [¥] 4 Fast-forward Button [9] 5 Fast-rewind Button [:] 6 Hold Switch [1HOLD] • It locks buttons on the remote controller.
VQT0Q47Eng.book 12 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Preparation (continued) Inserting/Removing the Battery or the Card Be sure to turn this unit off before the following operations. 1 Open the Card/Battery Door at the bottom of this unit. • Release the lock and then open the Door while sliding it. 2 Insert/remove the battery or the card. • Read the next page carefully. 3 Close the Card/Battery Door. • Close the Door and then lock it while sliding. ≥ Never open the Card/Battery Door during the access.
VQT0Q47Eng.book 13 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 ∫ When inserting the card/battery 1 1 2 3 A B 2 4 Confirm the direction of the battery and the card. Insert the battery fully into the slot with the Battery Lock 1 lowered. Check if the Battery Lock is hooked on the Battery 2. ≥ Place the battery with the label side upward. A ≥ Insert the battery in the direction indicated by the arrow. B 3 Label 4 Notch • Insert the card/battery fully and firmly. (The card clicks if it is fully inserted.
VQT0Q47Eng.book 14 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Preparation (continued) Charging the Battery Be sure to turn this unit off before the charging the battery. (When this unit is turned on, the battery cannot be charged.) Use the AC adaptor supplied for this unit. 1 2 1 Connect the AC mains lead to the AC adaptor and the AC mains socket, then connect the DC plug to this unit. • The AC mains lead does not fit entirely into the AC adaptor socket. A gap will remain as shown 1.
VQT0Q47Eng.book 15 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 ∫ Charging time and the number of recordable pictures/ time (per a battery) Charging time Approx. 160 minutes The number of recordable pictures [Picture] Continuous recording time [MPEG4] Approx. 140 minutes Continuous playback time Approx. 260 pictures (Recording conditions by CIPA standards) [MPEG4] Approx. 300 minutes [Audio] Approx.
VQT0Q47Eng.book 16 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Preparation (continued) ≥ The battery is warmed during and after charging. The SD Multi Camera is also warmed during the operation, however, it is not a malfunction. ≥ When you do not use this unit, disconnect the DC plug from this unit and disconnect the AC mains lead from the electrical outlet. Turning This Unit On 1 1 Slide the Power Switch to [ON]. • This unit is turned off when you slide the Power Switch to [OFF].
VQT0Q47Eng.book 17 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 ∫ Battery indicator ≥ It is displayed on the LCD Monitor (P92) when this unit is turned on. ≥ As the remaining battery power is decreased, the indicator is changed as > > (blinking). When the indicator is shown as (blinking), the battery will be exhausted in a few minutes. Charge the battery. ≥ The indication of the remaining battery power may be increased or decreased depending on each mode. Check the indicator every time you switch the mode.
VQT0Q47Eng.book 18 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Preparation (continued) Picture MPEG4 EXIT EXIT 1 2 2 Press the [MODE] button 1, and then roll the Jog Ball 2 to select the mode. – The selected icon is enlarged. • When the [MODE] button is tapped without a card in this unit, the demonstration mode (P91) is activated. 3 Press the Jog Ball to set. • Refer to P26 for the modes in the recording mode and refer to P41 for the modes in the playback mode.
VQT0Q47Eng.book 19 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Flash Auto MENU EXIT 2 2 MENU EXIT Roll the Jog Ball 2 to select the sub-menu, and then press the Jog Ball to set. – The sub-menu screen appears. Flash off MENU EXIT 3 Roll the Jog Ball to select the desired item, and then press the Jog Ball to set. – The setting is changed and the menu screen disappears. • If you have other items to select, repeat Step 3. ≥ To stop the operation, press the [MENU] button.
VQT0Q47Eng.book 20 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Preparation (continued) Setup Menu You can change the settings on this unit in the menu. 1 Press the [MENU] button and then set the desired items with the Jog Ball. (P18) Setup l Select the following items for the settings. ∫ Setting on the operation sound Beep ON Volume l Beep OFF Main volume Turns on the operation sound. Turns off the operation sound. Adjusts the volume of the stereo earphones.
VQT0Q47Eng.book 21 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 ∫ Setting on the USB connection Connection (USB) l Connection (PC) PictBridge Connects to the PC. (P72) Connects to the printer. (P53) ∫ Setting on the LCD Monitor Display setup Icon display Displays or hides the icon display. Brightness Adjusts the brightness of the LCD Monitor. 5min power off Turns off this unit automatically without any operation for about 5 minutes.
VQT0Q47Eng.book 22 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Preparation (continued) ∫ Setting on the clock Clock set Sets the date and time. ∫ Formatting (initialising) the card If the card is formatted, all the data (including protected files) cannot be recovered. Check the data before formatting. Format ∫ Restoring the settings Reset settings Resets to the initial settings except the clock setting. Setting the Clock The clock is not set at the time of purchase.
VQT0Q47Eng.book 23 ページ ２００４年１１月２６日 SEL 2 金曜日 午前１０時１２分 ENTER MENU EXIT Adjust the date and time with the Jog Ball. • The highlight moves between the items (Day, Month, Year, Hour, Minute) every time you press the Jog Ball. When you roll the Jog Ball up or down, the value is changed. (You can set the year from 2000 to 2099.) • The time is displayed in 24 hour system. SEL 3 ENTER MENU EXIT Press the [MENU] button after adjusting the date and time. – The setup screen disappears.
VQT0Q47Eng.book 24 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Preparation (continued) Shortcut Menu 1 Press the [MENU] button for 1 or more seconds and then set the item with the Jog Ball. • Roll the Jog Ball up/down/left/right to select the item and then press the Jog Ball to set the item. • Press the [MENU] button to exit the shortcut menu.
VQT0Q47Eng.book 25 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Recording Before Recording ∫ How to hold the SD Multi Camera ≥ Put your arm on the side of your body. ≥ Fix the SD Multi Camera with your right hand and put your left hand on the SD Multi Camera. ≥ The shutter speed can be automatically adjusted. The shutter speed becomes slow in dark places such as shaded areas or in a room. Therefore, be careful not to shake the SD Multi Camera and press the shutter button gently.
VQT0Q47Eng.book 26 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Recording (continued) Recording This unit can focus on the subject at a distance of about 60 cm or more. ∫ Selecting the desired recording mode 1 Slide the Power Switch to [ON]. – The Power Lamp lights in red. Slide the Record/Playback Mode Switch to the recording mode [ 2 Press the [MODE] button and then select the desired mode with the Jog Ball. Picture EXIT • Refer to the table below to select the mode.
VQT0Q47Eng.book ∫ 1 27 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 When selecting [Picture] Tap the Shutter button for recording. • You can also use the Shutter button on the remote controller. • Recorded pictures are played for a few seconds after you finish recording pictures. ∫ 1 When selecting [MPEG4] or [Voice] Tap the Shutter button for recording. – [¥] appears during recording. • You can also use the Shutter button on the remote controller. 2 Press the Shutter button to stop recording.
VQT0Q47Eng.book 28 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Recording (continued) ≥ Do not cover the microphone with your finger or other objects during recording. Be careful not to touch the Jog Ball or any other buttons. Noises may be recorded. When recording in [Picture] mode ∫ [Advanced setup] > [Reset file No.] on the menu setting, you can reset the file number in recording to a card to 0001. (The folder number is increased by 1.
VQT0Q47Eng.
VQT0Q47Eng.book 30 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Recording (continued) Voice 8 MB 25 min. 128 MB 8 h 30 min. 16 MB 58 min. 256 MB 16 h. 32 MB 2 h. 512 MB 33 h. 64 MB 4 h. 1 GB 66 h. ≥ The time listed above tables are approximate. ≥ The numbers of recordable pictures described in the above [Picture] ≥ ≥ ≥ ≥ 30 table are applicable when the picture quality is set to [Fine]. The numbers in brackets are applicable in the case of [Normal].
VQT0Q47Eng.book 31 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Changing the Picture Size and Quality 1 ∫ Press the [MENU] button and then set the item with the Jog Ball. (P18) Size and quality of the picture recorded in [Picture] 2016a 1512 Fine HDTV l 1600a 1200 l Quality 1280a 960 Normal Gives priority to picture quality. (High picture quality) Gives priority to the number of recordable pictures.
VQT0Q47Eng.book 32 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Recording (continued) ≥ When [HDTV] (picture size: 1920a1080) is selected, the pictures ≥ ≥ ≥ ≥ ≥ ≥ ≥ ≥ 32 are recorded with the aspect ratio equal to the High-Definition TV (16:9). The larger the picture size (values such as [640a480]) is, the larger the file size will become. If you select a larger picture size in the [Picture] mode, the printed picture will be clearer.
VQT0Q47Eng.book 33 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Enlarging Pictures (Digital Zoom) 1 Press the Jog Ball. – The zoom magnification appears. 1. 0t 2 Roll the Jog Ball up or down to set the zoom magnification. 2. 0t • You can enlarge the picture up to 4k. • The magnification is restored to 1k by pressing the Jog Ball. ≥ The more the picture is enlarged, the more the picture quality is deteriorated. ≥ You cannot enlarge pictures while pictures are recorded in [MPEG4] mode.
VQT0Q47Eng.book 34 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Recording (continued) Setting the Flash The available flash range is about 80 cm–120 cm. 1 Press the [MENU] button and then set the item with the Jog Ball. (P18) Auto Reduced red eye l Flash Flash off Flash on 34 VQT0Q47 The flash is automatically activated according to the recording situation. The flash is automatically activated according to the recording situation before actual recording.
VQT0Q47Eng.book ∫ 35 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 The flash is not activated ≥ The flash cannot be activated in the following cases. – When you set the flash to [Auto] or [Reduced red eye] in bright places – When recording in [MPEG4] mode ≥ When you record pictures without using the flash, set the ISO sensitivity to adjust the brightness (P40). ≥ If the subject is too close to the SD Multi Camera when taking a picture, the exposure may not be set properly and the picture may appear washed out.
VQT0Q47Eng.book 36 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Recording (continued) Recording with the Self-timer 1 Press the [MENU] button and then set the item with the Jog Ball. (P18) l Self timer You can select the time 10 s between the shutter 2s button is pressed and the (s: second) picture is actually recorded. OFF 2 The self-timer is turned off. Press the Shutter button to take a picture.
VQT0Q47Eng.book 37 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Adjusting the Colour to Natural Tone (White Balance) This mode allows you to reproduce a white colour closer to the tone in real life on the pictures recorded under sunlight, halogen lighting, etc. in which the white colour may appear reddish or bluish. 1 Press the [MENU] button and then set the item with the Jog Ball. (P18) Auto Incandescent White balance ∫ l You can automatically record pictures with natural tones.
VQT0Q47Eng.book 38 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Recording (continued) ≥ The white balance may not be set depending on the condition of the scene or the light source (e.g. in dark places, etc.). ≥ It is effective to set the white balance in [Manual] in the following scenes. – When recording under reddish lighting (halogen light bulb, sodium vapor lamp, etc.
VQT0Q47Eng.book 39 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Compensating the Exposure Use this function when you cannot achieve appropriate exposure due to the difference of brightness between the subject and the background, etc. 1 Press the [MENU] button and then set the item with the Jog Ball. (P18) EV auto The exposure is automatically determined. EV manual The exposure can be adjusted manually.
VQT0Q47Eng.book 40 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Recording (continued) Setting the ISO Sensitivity ISO sensitivity represents the sensitivity to light in values. It is convenient to take pictures without the flash. 1 Press the [MENU] button and then set the item with the Jog Ball. (P18) Advanced setup l Sensitivity Auto 100 200 400 l The ISO setting is automatically adjusted according to the brightness.
VQT0Q47Eng.book 41 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Playback Playback ∫ Selecting the desired playback mode 1 Slide the Power Switch to [ON]. – The Power Lamp lights in red. Slide the Record/Playback Mode Switch to the playback mode [ ]. 2 Picture EXIT Press the [MODE] button and then select the desired mode with the Jog Ball. • Refer to the table below to select the mode.
VQT0Q47Eng.book 42 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Playback (continued) 3 Roll the Jog Ball right or left to select the file you want to play. • Roll the Jog Ball to the right to display the next file. • Roll the Jog Ball to the left to display the previous file. ∫ When selecting [MPEG4] or [Voice] After you select the file in Step 3, 4 Press the Jog Ball to start playback. – [1] appears during playback. • If there are multiple files, the files will be played continuously.
VQT0Q47Eng.book 43 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 ≥ When playing a still picture, the [ ] icon appears for a moment and the resolution of the picture may look deteriorated a little. However, the picture is played with normal quality later. ≥ When starting the resume playback, the file earlier a bit from the position where you stopped is played. ≥ Some files may not be played on this unit even the files are in JPEG or ASF (MPEG4) format. ≥ [Voice] files cannot be played on Panasonic IC recorders.
VQT0Q47Eng.book 44 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Playback (continued) Adjusting Volume 1 Press the Volume button. • The volume turns up with [i]. The volume turns down with [j]. • If the volume adjustment screen is not operated for a while after adjustment, it will automatically disappear. ≥ When you want to listen to the audio being played, connect the remote controller and the stereo earphones (supplied). (You cannot listen to the audio on this unit.
VQT0Q47Eng.book 45 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Playing Motion Images Repeatedly (Repeat Playback) 1 Set the mode to [MPEG4] mode. (P41) 2 Press the [MENU] button and then set the item with the Jog Ball. (P18) OFF Repeat one l Stops playback after the last file is played. Repeats playing a file. Repeat Repeat all Repeats playing all files. Deleting Files Once deleted, files cannot be recovered. Check the files before deleting. 1 Press the [MENU] button and then set the item with the Jog Ball.
VQT0Q47Eng.book 46 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Playback (continued) 2 Select the files to be deleted and then press the Jog Ball. (Only when [Erase one] is selected) 3 Select [Yes] on the confirmation screen and then press the Jog Ball. • Press the [MENU] button to exit this setting. ≥ You cannot delete protected files (P47), music files and files that do not conform to DCF standard on this unit. ≥ Be sure to delete [Voice] files on this unit.
VQT0Q47Eng.book 47 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Preventing Accidental Erasure of Files (Lock Setting) This function allows you to prevent deleting of altering precious files by mistake. 1 Press the [MENU] button and then set the item with the Jog Ball. (P18) Lock 2 l Lock/Unlock Select the files to be protected and then press the Jog Ball. –[ ] appears on the bottom of the LCD Monitor. • You can select the desired files until you press the [MENU] button.
VQT0Q47Eng.book 48 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Playback (continued) Enlarging Pictures (Target Zoom) You can enlarge the picture up to 10k. 1 Select a picture in [Picture] mode. (P41) 2 Roll the Jog Ball upwards. – The target frame appears on the LCD Monitor. 1. 2t 3 4. 0t Roll the Jog Ball up or down to select the zoom magnification and then press the Jog Ball. • The more you roll the Jog Ball upwards, the more the zoom magnification is increased (up to 10k). 4 4.
VQT0Q47Eng.book 49 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 ≥ You can cancel the zoom by opening the menu screen. ≥ The more the picture is enlarged, the more the picture quality is deteriorated. ≥ The zoom may not be done on a picture recorded with other equipment. Registering Still Pictures as “Favourite” Only pictures registered as a “Favourite” can be displayed or watched on the slide show (P52). 1 Set the mode to [Picture] mode. (P41) 2 Press the [MENU] button and then set the item with the Jog Ball.
VQT0Q47Eng.book 50 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Playback (continued) ∫ When you cancel registration on all files Select [Unselect all] in Step 2, select [Yes] on the confirmation screen and then press the Jog Ball. All pictures registered are cancelled. ≥ Up to 999 pictures can be registered as a “Favourite”. Creating a Slide Show with Audio You can create a slide show with the audio file in the card added as a BGM. 1 Set the mode to [Picture] mode.
VQT0Q47Eng.book 4 51 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Press the [MENU] button. • If no audio file is recorded in the card, a slide show without audio is created. 5 DO YOU NEED BACKGROUND MUSIC? Yes No (When there are audio files in the card) Select [Yes] or [No] on the confirmation screen and then press the Jog Ball. • If you select [No], a slide show without audio is created. 6 (When you select [Yes] in Step 5) Select the audio file you want to play during the slide show and then press the Jog Ball.
VQT0Q47Eng.book 52 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Playback (continued) Playing Still Pictures on the Slide Show Still pictures are automatically played in sequence. This function is suitable for making a story with still pictures. 1 Set the mode to [Picture] mode. (P41) 2 Press the [MENU] button and then set the item with the Jog Ball. (P18) Slide show l Play slide show l Slide show (with audio) Plays slide shows with audio (P50) created on this unit.
VQT0Q47Eng.book 53 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 ≥ When you want to listen to the audio being played, connect the remote controller and the stereo earphones (supplied). (You cannot listen to the audio on this unit.) Printing Pictures Directly Connecting to a Printer (PictBridge) You can print still pictures played on this unit from the printer supporting PictBridge connected to this unit with the USB cable (supplied). (Turn the printer on beforehand.) 1 Set the mode to [Picture] mode.
VQT0Q47Eng.book 54 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Playback (continued) 4 Select a picture and then press the Jog Ball. 5 Check the setting, select [Print start] and then press the Jog Ball. 㪧㫀㪺㫋㪙㫉㫀㪻㪾㪼 COUNT Size Date ᲴᲫ ᲴPrinterSetting ᲴOFF Change Print start Print start Print starts. Start Change settings Change Changes the print setting. – When printing is finished, the message [PRINTING COMPLETED] appears. • To cancel printing, press the [MENU] button.
VQT0Q47Eng.book 55 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 ≥ Do not use any other USB cables except the supplied one. ≥ While printing or cancelling the print, do not disconnect the USB cable. ≥ Do not replace the card while connecting with the printer. (Check that the printer is not printing anything and then disconnect the USB cable before replacing the card.) ≥ Pictures recorded on other devices or altered on a PC may not be printed.
VQT0Q47Eng.book 56 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Playback (continued) ≥ Error messages also appear in the following cases. Check the message before connecting.
VQT0Q47Eng.book 57 ページ ２００４年１１月２６日 3 金曜日 午前１０時１２分 Roll the Jog Ball left or right to select the desired file. (Only when [Single print] is selected) 4 COUNT SEL 0 ENTER MENU EXIT Roll the Jog Ball up or down to select the number of prints and then press the Jog Ball. • The number of prints can be set from 1 to 99. • If you want to set DPOF setting on other pictures when [Single print] is selected, repeat Steps 3–4. 5 Press the [MENU] button. – The setting is completed.
VQT0Q47Eng.book 58 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Playback (continued) ∫ When you print the date in DPOF printing Select [Print date]>[ON] in Step 2, select [Yes] on the confirmation screen and then press the Jog Ball. • Date printing is set to all the pictures that DPOF setting is set. (You cannot set date printing for each picture.) • You cannot print the date on the pictures if the recording date is not recorded. • The date may be cut or not be displayed depending on the printer.
VQT0Q47Eng.book 59 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Playing Music Playing Music Files recorded onto a card with SD-Jukebox can be played on this unit. (You may not be able to play music depending on the file.) ≥ Audio file formats playable on this unit • MPEG2-AAC • WMA • MP3 Install SD-Jukebox from the supplied CD-ROM to the PC. Audio file Record audio files from a music CD to the PC. Connect this unit to the PC.
VQT0Q47Eng.book 60 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Playing Music (continued) 1 Insert a card which includes audio files. 1 Remote Controller (supplied) 2 Stereo Earphones (supplied) 2 1 2 Connect the remote controller and the stereo earphones. • You cannot listen to the audio on this unit. 3 Slide the Power Switch to [ON]. – The Power Lamp lights in red. Slide the Record/Playback Mode Switch to the playback mode [ ].
VQT0Q47Eng.book 5 61 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Press the [MENU] button and then List MENU EXIT select [List] with the Jog Ball. • When you did not select music from [List], the music will be selected and played from the files displayed. 6 7 Roll the Jog Ball up or down to select the desired music file. Play music. Remote Controller Playback/Stop Press 1/∫. Index Tap : or 9. Fast-forward/ Fast-rewind Keep pressing : or 9. Volume i: Turns up the volume. j: Turns down the volume.
VQT0Q47Eng.book 62 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Playing Music (continued) ∫ When you switch the sound quality Press the [EQ] button on the remote controller. • The sound quality is switched every time you press the [EQ] button as below. NORMAL (Normal sound) l S-XBS1 (Heavy and low sound) l S-XBS2 (Sound heavier and lower than S-XBS1) l TRAIN (Prevention on leakage of sounds) • The sound quality cannot be switched when the menu screen or the 6 pictures multi playback screen is displayed.
VQT0Q47Eng.book 63 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 ≥ Music files cannot be recorded or deleted on this unit. ≥ When multiple pictures are associated with a music file by SD-Jukebox, only the picture associated as the first picture will be displayed. (The picture may not be displayed depending on the picture.
VQT0Q47Eng.book 64 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Playing Music (continued) Playing Repeatedly (Repeat Playback) 1 Press the [MENU] button and then set the item with the Jog Ball. (P18) OFF l Stops playback after the last file is played. Repeat one Repeats the file being played. Repeat all Repeats playing all files (or all files in the playlist).
VQT0Q47Eng.book 65 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Connecting to PC Operating Environment of the Software Windows 98SE Is the installation of the USB driver needed? Me 2000 Macintosh XP Mac OS 9 Mac OS X OS standard driver is available. Needed Are SD Viewer and SD-Jukebox available? Not needed Available Not available ≥ SD Viewer and SD-Jukebox are not compatible with Macintosh.
VQT0Q47Eng.book 66 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Connecting to PC (continued) SD Viewer Ver. 3.2E for D-snap (SD Viewer) RAM SD-Jukebox Ver. 4.1 Light Edition (SD-Jukebox) 98SE 64 MB (recommended: Me 128 MB) or more 128 MB or more 2000 128 MB (recommended: XP 256 MB) or more 256 MB or more Free hard disc 400 MB or more space Display 100 MB or more High Colour (16 bit) or more (True Colour (24 bit) or more is recommended.
VQT0Q47Eng.book 67 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 ≥ Macintosh, Power Macintosh and Mac OS are trademarks of Apple Computer, Inc. of the U.S. ≥ IBM and PC/AT are registered trademarks of International Business Machines Corporation of the U.S. ≥ Intel, Pentium and Celeron are trademarks or registered trademarks of Intel Corporation in the United States and/or other countries. ≥ Even if the system requirements are fulfilled, some personal computers can not be used.
VQT0Q47Eng.book 68 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Connecting to PC (continued) ≥ Depending on your computer system, you may experience problems such as being unable to record or use recorded music data. Please note that Matsushita is in no way liable for any music data you lose, or for any other direct or indirect damages. ≥ When you use the CDDB function, the environment for the Internet access is needed.
VQT0Q47Eng.book 69 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Installing the USB Driver When your OS is Windows 2000 or XP, the installation of the USB driver is not required because the OS standard driver is used. 1 Click [USB Driver]. 2 Click [Finish]. • To enable the driver, restart the PC. Installing SD Viewer 1 Click [SD Viewer 3.2E]. 2 Click [Next].
VQT0Q47Eng.book 70 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Connecting to PC (continued) 3 4 5 Click [I agree]. Follow the message on the screen to continue the installation. Click [Finish]. • SD Viewer can be used after restarting the PC. ≥ When the message that informs the absence of Windows Media Player 6.4 or later appears, update Windows Media Player after the installation is completed. ≥ If Internet Explorer 5.5 or later is not installed, install it first and then install SD Viewer.
VQT0Q47Eng.book 71 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Installing SD-Jukebox 1 Click [SD-Jukebox 4.1]. 2 Click [Next]. 3 Click [Yes]. 4 Enter [Serial No.] (on the backside of the package of the CD-ROM) and [Name], and then click [Next]. 5 Follow the message on the screen to continue the installation.
VQT0Q47Eng.book 72 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Connecting to PC (continued) Click [Finish]. 6 • SD-Jukebox can be used after restarting the PC. Connecting to a PC When your OS is Windows 98SE or Me, the USB driver is required for connecting this unit to the PC. (Do not connect this unit to the PC until the USB driver is installed. (P69)) ≥ Turn the PC on beforehand. Turn this unit on and set to the playback mode. 1 • Be sure to insert the charged battery and the card into this unit.
VQT0Q47Eng.book 73 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Connect this unit to the power plug with the AC adaptor 1 and the AC mains lead. 3 1 Connect this unit to the PC with the supplied USB cable 2. 4 2 – [ACCESSING PC] indication appears. • If the [ACCESSING PICTBRIDGE/ PTP] indication is displayed, once disconnect the USB cable and then confirm the setting in Step 2.
VQT0Q47Eng.book 74 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Connecting to PC (continued) Checking that This Unit Is Properly Recognised by the PC If this unit is not properly recognised, check the connection again. ∫ In the case of Windows 1 Check that [Removable Disk] is added to [My Computer]. • The drive name (E: etc.) varies depending on the PC used. ∫ In the case of Macintosh 1 Check that the icon of [untitled] or [NO_NAME] disc is displayed on the desktop.
VQT0Q47Eng.book 75 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Disconnecting the USB Cable Safely 1 Double-click the [ on the task tray. 2 Select [USB Mass Storage Device] and then click [Stop]. 3 Check that [MATSHITA SD Multi Camera USB Device] is selected and then click [OK]. 4 ] icon Click [Close] to close the dialogue. • You can disconnect the USB cable safely. ≥ Depending on the OS (Windows 98SE or Me, etc.), the icon for safe removal may not be displayed in the task tray.
VQT0Q47Eng.book 76 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Connecting to PC (continued) Folder Structure of the Card Used for This Unit 100_PANA DCIM MISC SD Memory Card SD_AUDIO SD_VIDEO PRL001 SD_VOICE SD_VC100 ≥ Files recorded with this unit are saved in the following folders. Folder name Picture 100_PANA MPEG4 File name (example) P1000001.JPG PRL001 MOL001.ASF Voice SD_VC100 MOB001.VM1 Audio SD_AUDIO AOB001.SA1 ≥ Do not delete the folders in the card on the PC.
VQT0Q47Eng.book 77 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Using Files in a Card on a PC ([Picture] • [MPEG4]) 1 Connect this unit to the PC. (P72) Open [My Computer] and double-click the folder in the [Removable Disk] which includes files. 2 • When your OS is Macintosh, double-click the folder in the [untitled] or [NO_NAME] icon. 3 P1000001 .JPG P1000002 .JPG P1000003 .JPG Drag and drop files to the destination folder (the hard disc of the PC).
VQT0Q47Eng.book 78 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Connecting to PC (continued) • You can also browse [Picture] files and [MPEG4] files with SD Viewer (supplied). File type Software used for playing files Windows Macintosh Picture Depends on the setting on the PC. MPEG4 Windows Media Player 6.
VQT0Q47Eng.book 79 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Using SD Viewer ∫ Starting SD Viewer 1 Select [Start]> [All Programs]> [Panasonic]> [SD Viewer for D-snap]> [SD Viewer for D-snap]. • The indications on the screen may vary depending on OS and settings in your PC. Accordingly, the operation may be different from the one described above. ∫ Capturing files with SD Viewer in PC Connect this unit to the PC 1 (P72) and then click [Acquire]. 2 Check the target and then click [OK].
VQT0Q47Eng.book 80 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Connecting to PC (continued) ∫ Reading the operating instructions of SD Viewer Select [Help]>[Manual]. 1 • Adobe Acrobat Reader is required. (P82) ∫ Closing SD Viewer 1 Select [File]>[Exit]. • You can also close SD Viewer by clicking [k] on the upper right corner of the screen. ≥ Using SD Viewer • You can capture [Picture] files and [MPEG4] files in the card into the PC. • You can classify pictures by recording date or keywords.
VQT0Q47Eng.book 81 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Using SD-Jukebox ∫ Starting SD-Jukebox 1 Select [Start]> [All Programs]> [Panasonic]> [SD-JukeboxV4]> [SD-JukeboxV4]. • The indications on the screen may vary depending on OS and settings in your PC. Accordingly, the operation may be different from the one described above. • When SD-Jukebox is started for the first time, the file import screen (the screen to import audio files from the hard disk to SD-Jukebox) appears.
VQT0Q47Eng.book 82 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Connecting to PC (continued) ∫ Closing SD-Jukebox 1 Click [t] on the upper right corner of the screen of SD-Jukebox. ≥ Using SD-Jukebox • You can save your favourite titles on the PC from a music CD or create a playlist of audio files. • You can save audio files or playlists saved on the PC to the card. • For details of the operation procedures, refer to the operating instructions of SD-Jukebox (PDF file).
VQT0Q47Eng.book 83 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Uninstalling the Software If you do not need the software installed any more, uninstall (delete) it from the PC. 1 Select [Start]>[Control Panel] and then click [Add or Remove Programs]. 2 Select the software you want to delete and then click [Change/Remove]. ≥ Depending on the OS, the uninstallation procedure may vary. For details, refer to operating instructions of the OS used.
VQT0Q47Eng.book 84 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Cautions for Use This Unit Keep this unit away from magnetised equipment (such as a microwave oven, TV, video game equipment, etc.). ≥ If you use this unit on or near a TV, images and sounds may be disturbed due to electromagnetic wave radiation. ≥ Do not use near cell phone because doing so may cause noise to adversely affect the picture and sound.
VQT0Q47Eng.book 85 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 When carrying this unit, take care not to drop or hit it. Do not carry this unit in a pocket. ≥ The SD Multi Camera body may be destroyed by a strong shock, and it may cause a malfunction of this unit. Store this unit in the carrying case (supplied). Do not use benzine, thinner or alcohol for cleaning this unit. ≥ Remove the battery before cleaning this unit. ≥ The SD Multi Camera body may be deformed and the surface finish may peel off.
VQT0Q47Eng.book 86 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Cautions for Use (continued) The Battery Lithium ion battery is compact and high-capacity battery. However, when the battery is cooled under low temperature (10xC or less) such as outside in winter, the available time of the battery becomes shorter and this unit may not work. In this case, warm the battery and insert it into this unit just before you use this unit. (If you use a pocket warmer, do not let the pocket warmer touch with the battery.
VQT0Q47Eng.book 87 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Cautions to store the battery ≥ Store the battery in a cool and dry place with a relatively stable temperature. (Recommendable temperature: 15oC–25oC Recommendable humidity: 40%–60%) ≥ Extremely high or low temperature will shorten the life of the battery. ≥ If the battery is kept in hot, humid, smoky or dusty places, the terminals may rust and cause malfunctions.
VQT0Q47Eng.book 88 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Cautions for Use (continued) When the charge lamp blinks approx. every 0.5 second (lighting approx. 0.25 second, turning off approx. 0.25 second): ≥ The room or the battery temperature is extremely high or low. Wait until the room or the battery temperature becomes adequate and then recharge the battery. If you still cannot charge the battery, there may be defective on this unit, the battery or the AC adaptor. Consult the dealer.
VQT0Q47Eng.book 89 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 When condensation has taken place ≥ Turn this unit off and leave this unit in this condition for about 1 hour. When this unit becomes close to the ambient temperature, the condensation disappears naturally. ≥ When you move this unit from a cold place to a hot place, put the camera into plastic bag and then take it out after the temperature of this unit becomes close to the ambient temperature to avoid condensation.
VQT0Q47Eng.book 90 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Cautions for Use (continued) Card When the Card Access Lamp is blinking (or when the message [ACCESSING CARD] appears), do not open the Card/Battery Door to remove the card, turn this unit off, or subject it to vibration or impact. Do not leave the card in places where there is high temperature or direct sunlight, or where electromagnetic waves or static electricity are easily generated. Do not bend, drop, or subject it to strong vibration.
VQT0Q47Eng.book 91 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Format ≥ Format a card on this unit. If you format the card using a PC, use SD-Jukebox. Particularly for the card containing audio files, check in the card using SD-Jukebox with which the audio files were recorded, then format it. (For details, read the operating instructions of SD-Jukebox.) ≥ Do not use a PC (Explorer) to format a card. Otherwise, it may not be recognised by this unit.
VQT0Q47Eng.book 92 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Others Screen Display ∫ Screen Display in Recording 1 2 3 4 5 6 7 2016 016 30 0h10m10s 21/12/2004 2.
VQT0Q47Eng.book 93 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 ∫ Screen Display in Playback 1 Playback mode (P41) 2 Counter display 3 Repeat playback (P45) 7 4 Picture quality (P31) 2016 016 0h10m10s 100-0125 5 Picture size (P31) 6 Battery remaining (P17) 7 Folder/File number 8 Stop/Play/Reading display 21/12/2004 9 Lock setting (P47) 12:00 2 10 No.
VQT0Q47Eng.book 94 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Others (continued) Messages The confirmation/error message will be displayed on the LCD Monitor. Messages EMPTY BATTERY Countermeasures The battery remaining is insufficient. Recharge the battery. (P14) Insert the battery into this unit correctly. (P12, 13) INSERT BATTERY This message also appears when the battery is excessively discharged. Charge the battery. NO CARD Insert the card correctly. (P12, 13) MultiMediaCard is not available.
VQT0Q47Eng.book 95 ページ ２００４年１１月２６日 Messages CANNOT SET FILE 金曜日 午前１０時１２分 Countermeasures Select the still picture recorded by this unit. Switch the Record/Playback Mode Switch to the SET TO PLAY MODE playback mode [ ] when connecting this unit to PC or printer. (P53, 72) USE BOTH AC ADAPTOR AND BATTERY Connect the AC adaptor when connecting this unit to PC or printer. (P53, 72) TURN POWER OFF AND ON Turn this unit on again. ERROR After turning this unit off, remove and insert the battery.
VQT0Q47Eng.book 96 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Others (continued) Q (Question) The colour or the brightness of the LCD Monitor changes. A (Answer) The colour or the brightness of the screen may look different under fluorescent light. The LCD Monitor is Adjust the brightness of the LCD Monitor properly. too bright or dark. (P21) Cannot record. Is the card inserted? You cannot record pictures when the write-protect switch is slid toward [LOCK].
VQT0Q47Eng.book 97 ページ ２００４年１１月２６日 Q (Question) A (Answer) 金曜日 午前１０時１２分 The flash cannot be Is the flash set to [Flash off]? Check the flash mode. activated. (P34) The pictures recorded with a flash are dark. Is the flash covered with your finger? Is this unit too far away from the subject? The colours of the picture recorded with the flash are not similar to the subject in real life.
VQT0Q47Eng.book 98 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Others (continued) Q (Question) 98 A (Answer) When connecting to a PC, images cannot be transferred. Is this unit connected to the PC correctly? (P72) Does the PC recognise this unit properly? (P74) The pictures cannot be printed with printers supporting PictBridge. Set this unit to the playback mode and then check if [Setup]>[Connection (USB)]>[PictBridge] is selected in the menu.
VQT0Q47Eng.book 99 ページ ２００４年１１月２６日 Q (Question) A (Answer) 金曜日 午前１０時１２分 If you do not use this unit for a long period of time, the clock may be reset. When the screen of clock The clock is not set setting appears, set the clock again. correctly. If you record pictures without the clock setting, the date is recorded as [1/1/2000 0:00]. The retouch software does not start even if retouch files (extension “.ped”) are clicked on Windows Explorer etc.
VQT0Q47Eng.book 100 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Specifications ∫ SD Multi Camera Power source Power consumption Image sensor 1/3.2q CCD Interline type RGB primary colour filter Number of effective pixels Approx. 3,100,000 pixels Scanning Interlace scanning Standard illumination 3000 lx Minimum required illumination 80 lx Focal length 4.5 mm 35 mm equivalent 34.8 mm Digital zoom 4k F value 4.0 Shortest image distance Approx.
VQT0Q47Eng.book 101 ページ Audio input Monaural microphone (built-in) Audio output Earphone output: 3.5 mWi3.5 mW Load impedance 16 h Dimensions Approx. 52.5 mm (W)k88.7 mm (H)k21.2 mm (D) (Thinnest part 18.9 mm) ２００４年１１月２６日 金曜日 午前１０時１２分 Body weight Approx. 75.0 g (without battery pack and SD Memory Card) Body weight in operation Approx. 104 g (with battery pack and SD Memory Card) Operating temperature 0–40oC Operating humidity 10–80% ∫ AC adaptor Input Output AC 110–240 V 50/60 Hz 0.13 A DC 4.8 V 1.
VQT0Q47Eng.
VQT0Q47Eng.book 103 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Before opening the CD-ROM package, please read the following. End User License Agreement You (“Licensee”) are granted a license for the Software defined in this End User License Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita Electric Industrial Co., Ltd.
VQT0Q47Eng.book 100 ページ ２００４年１１月２６日 金曜日 午前１０時１２分 Matsushita Electric Industrial Co., Ltd. Web site: http://www.panasonic.co.
