Installation Manual

92
13 TROUBLESHOOTING
Symptom Cause
One of the following messages is displayed
and the unit does not start.
• Application error !!
• DiskErr
• CF error !!
• Contact the store where you purchased the system or our
service agency.
A message, “Diskxx access error”, is
displayed. (xx is a number from 1 to 4)
Press the [Check] button to close, and press [Reset] to the
left of the clock display. If the same message appears again,
consult your local dealer or service representative.
CZ-256ESMC1U_改.indb 92CZ-256ESMC1U_改.indb 92 2011/11/11 11:25:562011/11/11 11:25:56