Installation Manual

39
6 USING THE SYSTEM
Main
Sub
1
1
2
2
6.5 Total Data and Manual Cut-Off Processing
6.5.1 Displaying total data by indoor unit
Use this screen to check total data such as the operating time and the number of operations for
each indoor unit.
Procedure
Select 2.Total data/Cut-off in the main menu and 1.Each I/D unit in the sub menu.
A
Selects the tenant to display.
B
Selects either the current or the past (maximum 24 months) cut-off data.
C
Selects the time zone to display.
* This button will be invalid when setting the mode at “No Distrib.”. (see
Main
Sub
1
1
5
5
)
A
B
C
D
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
6.Auxiliary settings
1.Each I/D unit
2.Each tenant
3.Each O/D unit
4.Pulse meter
5.Cut-off/Data backup
1.All hours
2.Regular hours
3.Out of hours
4.Special Day
D
If you want to display operating time by fan speed, touch Operating time . The display
changes as shown below.
4/Aug 3:10PM
CZ-256ESMC1U_改.indb 39CZ-256ESMC1U_改.indb 39 2011/11/11 11:25:262011/11/11 11:25:26