Installation Manual

31
6 USING THE SYSTEM
“---” is displayed in the tenant name row for indoor units not registered to a tenant.
The fi rst 12 characters are displayed for tenant names and unit names.
If the Interface Adaptor is used, the color becomes light purple during the ON operation.
Main
Sub
1
1
1
1
6.4 Status Monitoring and Operation Screens
6.4.1 Displaying general information by tenant
Use this screen to display information about all connected indoor units by tenant.
Procedure
Select 1.Status/Control in the main menu and 1.Each tenant in the sub menu.
The indoor units for each tenant are displayed.
A
Scrolls the display one tenant at a time.
B
Scrolls the display one row at a time.
Meaning of symbols
: COOL
: SWING
: DRY
: TIMER
: FAN
: Clean filter sign
: HEAT
: VENTILATION
: ALARM
: AUTO Mode/Speed
: High fan speed
: Medium fan speed : Low fan speed
: Accept remote controller : Prohibit remote controller setting No.1
Tenant name
AB
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
6.Auxiliary settings
1.Each tenant
2.Each tenant details
3.Each zone
4.Each zone details
5.All units
(FRI) 4/Aug 2:56PM
CZ-256ESMC1U_改.indb 31CZ-256ESMC1U_改.indb 31 2011/11/11 11:25:212011/11/11 11:25:21