Manualshelf

Operating instructions

ManualsBrandsPanasonic Manualscar media receiversCYVMD9000U
123456789
E
N
G
L
I
S
H
29
CY-VMD9000U
44
User Settings
E
N
G
L
I
S
H
30
CY-VMD9000U
45
Monitor Position
Default:
TILT: 3
SLIDE: FRONT
Setting range:
TILT: 1 to 5
SLIDE: FRONT, REAR
Navigation Set up
Default:
Navigation input: RGB
Speaker setting: AUTO
Note:
≥ You can set the navigation speaker set-
ting when “RGB” is selected on naviga-
tion input.
1 Press [MENU]
to display the main
menu.
2 Press [$] or [%] to
select “USER”.
1 Press ["] or [#] to
select “TILT/SLIDE”.
2 Press [ENTER] to set.
TILT/SLIDE
1 Press ["] or [#] to
select “NAVI SETUP”.
2 Press [ENTER] to set.
NAVI SETUP
1 Menu 2 Submenu
USER
SCREEN
DVD
SOUND
*
*
When connected to
CA-TU7000U
Notes:
≥For smooth adjustment, make sure to first return to the lateral angle to the neutral position and then
adjust the tilt and angle.
≥Front-rear position “REAR” and the tilt angle “5” cannot be selected at the same time.
3 Setting
The monitor position setting menu can also be displayed by pressing [TILT] on the display unit for
more than 1 second. (For details, refer to page 25.)
1 Press [#] or ["] to select the setting.
: Tilting angle
adjustment
: Front-rear
position
: Connected to the RGB input cord, or a car navigation system not connected.
: Connected to the VTR1-IN
: Connected to the VTR2-IN
: Sound does not come out.
: The sound comes out in the same mode as the picture.
: The sound from the Panasonic car navigation system (not available yet) always
comes out.
1 2 3 4 5
FRONT REAR
RGB
VTR1
VTR2
NAVI IN
Navigation input
SP SETUP
Speaker setting (output setting of supplied speaker)
OFF
AUTO
NAVI
Notes:
≥Press [MODE] to return to the regular mode.
≥The display returns to the previous one with no operation
for more the 60 seconds after changing to the setting
menu.
1 Press [#] or ["] to select “NAVI IN”.
2 Press [%] or [$] to select the setting.
2 Press [%] or [$] to select the setting.
1 Press ["] or [#] to select “SP SETUP”.
2 Press [%] or [$] to select the setting.
3 Press [ENTER] to set.
3 Press [ENTER] to set.
FrontRear
[%][$]
1 to 5
["][#]
Tilt angle Front-rear position
VOLUME
MENUMUTE MODE NAVI
NAVIGATION ASPECT
POWER
ASP
ENTER
["] [#] [%] [$]
(SELECT, ADJUST)
[ENTER]
[MENU]
[MODE]
DISC/BAND
TRACK/
TUNE
P•MODE
[MODE]
[MENU]
["] [#] [%] [$]
(SELECT, ADJUST)
[ENTER]
P
•
M
OD
E

Summary of content (9 pages)