Datasheet

Type
Thru-beam Retroreective Diffuse reective
With polarizing lters
With sensitivity adjuster
Standard Side view Standard Side view Standard Side view Standard Side view Standard Side view
Model No.
Light-ON
CY-111A□ CY-111VA□ CY-192A□ CY-192VA□ CY-191A□ CY-191VA□ CY-121A□ CY-121VA□ CY-122A□ CY-122VA□
Item Dark-ON
CY-111B□ CY-111VB□ CY-192B□ CY-192VB□ CY-191B□ CY-191VB□ CY-121B□ CY-121VB□ CY-122B□ CY-122VB□
Sensing range 15 m 49.21 ft 4 m 13.12 ft (Note 2) 2 m 6.56 ft (Note 2)
100 mm 3.94 in
(Note 3)
600 mm 23.62 in
(Note 3)
Sensing object
ø18 mm ø0.71 in or
more opaque object
(
Setting distance
between emitter and
receiver: 15 m 49.21ft
)
ø50 mm ø1.97 in or
more opaque,
translucent or
transparent
object
(Note 2, 4)
ø50 mm ø1.97 in or
more opaque, translu-
cent,
transparent
or
specular object
(Note 2, 4)
Opaque, translucent or transparent object
(Note 4)
Hysteresis
–
3 to 15 % of operation distance (Note 3)
Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption
Emitter: 35 mA or less
Receiver: 35 mA or less
35 mA or less
Output
Utilization category DC-12 or DC-13
Short-circuit protection Incorporated
Response time 1 ms or less
Test input (emission halt) function
Incorporated
–
Operation indicator Yellow LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Power indicator
Green LED (lights up
when the power is ON)
(incorporated on the
emitter)
–
Environmental resistance
Pollution degree 3 (Industrial environment)
Protection IP67 (IEC)
Ambient temperature –25 to +55 °C –13 to +131 °F (No dew condensation or icing allowed), Storage: –40 to +70 °C –22 to +158 °F
Ambient humidity 50 % RH (at +70 °C +158 °F)
Ambient illuminance Incandescent light: 5,000 ℓx at the light-receiving face
EMC EN 60947-5-2
Voltage withstandability 500 V AC for one min. between all supply terminals connected together and enclosure
Vibration resistance 10 to 55 Hz frequency, 0.5 mm 0.02 in amplitude in X, Y and Z directions for 1.5 hours each
Shock resistance 294 m/s
2
acceleration (30 G approx.) in X, Y and Z directions for three times each
Emitting element Infrared LED (modulated) Red LED (modulated)
Infrared LED (modulated)
Peak emission wavelength
890 nm 0.04 mil 875 nm 0.03 mil 665 nm 0.03 mil 875 nm 0.03 mil
Material Enclosure: PBT, Lens: PMMA
Cable (except for M12 plug-in
connection type)
0.44 mm
2
3-core cabtyre cable, 2 m 6.56 ft long
Cable extension Extension up to total 10 m 32.81 ft is possible with 0.34 mm
2
, or more, cable (thru-beam type: both emitter and receiver).
Net weight
(Note 5)
2 m cable length type
Emitter/
Receiver: 65 g
approx.
Emitter/
Receiver: 70 g
approx.
65 g
approx.
70 g
approx.
65 g
approx.
70 g
approx.
65 g
approx.
70 g
approx.
75 g
approx.
M12 plug-in connector type
Emitter/
Receiver: 15 g
approx.
Emitter/
Receiver: 20 g
approx.
15 g
approx.
20 g
approx.
15 g
approx.
20 g
approx.
15 g
approx.
20 g
approx.
25 g
approx.
Accessories Nut: 4 pcs. Nut: 2 pcs.
Notes: 1) Where measurement conditions have not been specied precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) The sensing range and the sensing object of the retroreective type sensor are specied for the RF-420 reector (optional).
3) The sensing range and the hysteresis of the diffuse reective type sensor are specied for white non-glossy paper (200 × 200 mm 7.87 × 7.87 in) as the
object.
4) Make sure to conrm detection with an actual sensor before use for detection of the transparent object and the translucent object.
5) The weight includes the weight of nuts.
<NPN output type>
NPN open-collector transistor
• Maximum sink current: 100 mA
• Applied voltage: 24 V DC or less (between output and 0 V)
• Residual voltage: 1.5 V or less
<PNP output type>
PNP open-collector transistor
• Maximum source current: 100 mA
• Applied voltage: 24 V DC or less (between output and +V)
• Residual voltage: 1.5 V or less
SPECIFICATIONS
Cylindrical Photoelectric Sensor CY-100 SERIES
3