TITLE SETUP MENU EN TER TRACK/SEARCH STOP PAUSE PLAY REPEAT DISC/FOLDER RANDOM RAND SCAN 1 2 4 5 7 8 REP SUBTITLE CX-DH801N OSD NTSC/PAL 0 3 6 SUB 8-Disc DVD Changer AUDIO 9 ANGLE TRACK RETURN GRP RET TITLE/CHAPTER CAR AV CX-DH801N Operating Instructions Bedienungsanleitung Manuel d’instructions Gebruiksaanwijzing Bruksanvisning Manuale di istruzioni Manual de Instrucciones Brugsvejledning ® Matsushita Electric Industrial Co., Ltd. Web Site : http://www.panasonic.co.
Contents Safety Information English CX-DH801N 1 8-Disc DVD Changer WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE ONLY THE INCLUDED COMPONENTS. NOT FOR USE WHERE VIDEO MONITOR IS VISIBLE TO DRIVER TO AVOID RISK OF SERIOUS INJURY OR POSSIBLE VIOLATION OF STATE LAWS. Laser Product LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM.
Safety Information 3 Warning This pictograph intends to alert you to the presence of important operating instructions and installation instructions. Failure to heed the instructions may result in severe injury or death. Warning Observe the following warnings when using this unit. ❑ The driver should neither watch the display nor operate the system while driving. Watching the display or operating the system will distract the driver from looking ahead of the vehicle and can cause accidents.
Discs that can be Played Back ❒ Disc Type DISC ❒ Symbols used on jackets DVD Use This Product Safely Features VCD (Video CD) CD (Examples of such symbols include) CD-R/RW 2 ¡ : Number of subtitle languages ¡ 2 : Number of audio tracks ¡ : Number of angles English English Panasonic welcomes you to our constantly growing family of electronic products owners.
System Combination STAND BY (R) ON (G) COLOR LCD MONITOR Color LCD Monitor: CY-VM1500EX DIGITAL PRO LOGIC PROCESSOR DIGATAL SURROUND CE display super VOL SEL MUTE 7 Digital Surround Processor: CY-AC300 SOUR AC300 SOURCE bright & 30w Power Amplifier for Center 4 2 Speaker DIMMER SPACE POSITION multi-color DR COMP DIM SPC POSI 3 1 PWR Connecting with the display monitor and 1DIN CD/Receiver with CD/DVD changer Control.
Preparation Battery Installation 1. DVD Changer Q’ty: 1 CX-DH801N 9 2. Disc Magazine Q’ty: 1 TITLE SETUP MENU EN TER TRACK/SEARCH STOP PAUSE PLAY REPEAT DISC/FOLDER RANDOM RAND SCAN REP 1 SUBTITLE 2 3 SUB 4 5 6 AUDIO 7 8 9 ANGLE TRACK RETURN OSD 0 GRP RET NTSC/PAL 3. Remote Control Unit Q’ty: 1 TITLE/CHAPTER CAR AV (Inserting/Replacing the Battery) q Remove the battery holder. With the remote control unit placed on a flat surface.
Names of Controls and Functions ❑ General ❑ DVD Changer Unit Shutter for the deck mechanism protection Push the magazine straightforward into the slot to make this shutter drawn properly. 11 HA Remote Control Unit B C V Aim the remote control at the remote control sensor and operate it (see below note). English English DVD Changer, Disc Magazine and Tray 12 [}] [{] ¡Selects (vertically) or adjusts an operation or item. Note: Do not touch this shutter.
13 [}] [{] []] [[] DVD VCD CD MP3 CH-C ¡Selects an operation or item. (a page 21) [■] (STOP) DVD VCD CD MP3 CH-C ¡Stops playback. (a page 20, 25) [ENTER] DVD VCD CD MP3 CH-C ¡Determines an operation or item. (a page 21, 24) CH-C ¡Pause (a page 20, 25) DVD[ENTER] VCD CD MP3 ¡Playback (a page 18) SETUP MENU PAUSE Do not use discs that fit any of the descriptions given below. Using these discs may damage the discs or cause the unit to malfunction.
(Continued) 15 Loading and Removing the Magazine Note: Please wait for 10 seconds or more after connecting the battery cord to insert the disc magazine. Failure to observe this may cause a disc loading error. Caution: Insert disc trays into the magazine firmly until they click. Failure to do so may cause disc clogging in the DVD changer unit or a malfunction of your DVD changer.
OSD (On Screen Display) Change and Indications (Continued) This unit has 9 types OSDs. The following operations allows you to change among OSDs. Example: CY-VM1500EX Display unit ❑ DVD/VCD (Video CD) Example: EUR7641010 (option) Remote Control for control unit STAND BY (R) ON (G) ¡Playing time is displayed.
DVD/VCD (Video CD) Playback ¡Operations vary according to the disc. For details, refer to the guide provided with the disc. MP3 CDCH-C MP3 indicate CH-C ¡The pictographs DVD VCDDVDCDVCD and the compatible types of disc. [MENU] (TITLE) *For the detail display, please refer to the next page. TITLE SETUP MENU TRACK/SEARCH [3] (STOP) [y] (PAUSE) [s] [d] [5] (PLAY) (Control unit LCD display example: After 2005 (ex. CQ-C9901/C9701N) type 1 DIN receiver) Playing time Chapter No. Disc No.
¡Operations vary according to the disc. For details, refer to the guide provided with the disc. MP3 CDCH-C MP3 indicate CH-C ¡The pictographs DVD VCDDVDCDVCD and the compatible types of disc. (Continued) Useful Function English About DVD Video Wide Dynamic Range Caution: The sound of DVD audio/video covers a wide dynamic range of more than 100 dB. Thus, the reproduced sound volume of some DVD discs may be significantly low.
MP3 CDCH-C MP3 indicate CH-C ¡The pictographs DVD VCDDVDCDVCD and the compatible types of disc. ¡In some functions, operations of the DVD changer may be different from those of the control unit (Example, CQ-C9901N, CQ-VD7001N etc.) Playing time Playing time File/folder numbers File name Track/File No. Playing time CD MP3 CH-C [d]: next track/file [s]: beginning of the current track/file Previous track/file (Press twice.
What is MP3 Recording MP3 files on a CD-media MP3 (MPEG Audio Layer-3) is a compression format of digital audio. MP3 is developed by MPEG (Motion Picture Experts Group). Using this compression format, you can record the contents of about 10 music CDs on a single CD media (This figures refer to data recorded on a 650 MB CD-R or CD-RW at a fixed bit rate of 128 kbps and a sampling frequency of 44.1 kHz). Note: ¡MP3 encoding and writing software is not supplied with this unit.
GENERAL SETUP TV TYPE Select a TV Type. TV MODE Select a screen size. Tree 3 MULTI.
AUDIO GENERAL PREFERENCE English MULTI. SYSTEM 29 (Auto selection of a TV standard format) TV TYPE (TV standard format setting) Press and hold [OSD] (NTSC/PAL) for more than 6 seconds to toggle between NTSC and PAL forcibly. Press and hold [OSD] (NTSC/PAL) for more than 6 seconds twice when the current mode is “NTSC”. (When NTSC formatted software is playing.
Settings: PREFERENCES 31 PREFERENCES GENERAL AUDIO (Audio Language Setting) AUDIO PREFERENCES GENERAL SUBTITLE (Subtitle Language Setting) ENGLISH ENGLISH Audio Language during the DVD video playback is set to English. JAPANESE FRENCH Subtitle Language during the DVD video playback is set to English. SPANISH Subtitle Language during the DVD video playback is set to Japanese. CHINESE Subtitle Language during the DVD video playback is set to French.
Troubleshooting If the suggestions below do not solve the problems, it is recommended to take the unit to your nearest authorized Panasonic Service centre. The product should be serviced only by qualified personnel. Please refer checking and repair to professionals. Panasonic shall not be liable for any accidents arising out of neglect of checking the unit or your own repair after your checking. ■ Common Problem Possible cause a Possible solution Car’s ignition switch is not on.
Troubleshooting (Continued) ■ Remote Control The disc does not conform to any of the file systems supported by this player. aInsert a disc that conforms to the file systems supported by this player. (a page 27). No playback. Battery poles (+) (–) are reversed. aInsert the battery correctly. Wrong battery. aCheck the battery. The MP3 file is missing the “.mp3” file name extension. aMake sure to add the “.mp3” extension to each MP3 file name. Take the unit to Service centre and ask for fuse replacement.
37 (Continued) Maintenance Error Display Messages Product Servicing ■ DVD Changer (Control unit / Monitor display) If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized Panasonic Service centre. The product should be serviced only by a qualified technician. Problem -E1(Control unit display) (Next disc will be selected automatically after 5 seconds.) -E2(Control unit display) (Next disc will be selected automatically after 5 seconds.
Language Code List Corresponding keys among the DVD changer remote control, the control unit, and its remote control. Note: To exit setup, press [RET]. (The setting is not reflected when [ENTER] is not pressed.) [MODE] / [SRC] [BAND] (PAUSE/PLAY) [REPEAT] (6) [RANDOM] (4) Note: Some operations are not allowed in some units.
41 Digital audio output connector (Optical) The digital audio output connector (optical) converts electrical signals into optical signals and transfers them to the amplifier. Consequently, it has a number of features including its immunity from electrical interference from external sources and its ability to prevent the generation of noise and its minimal effect on the external environment. Interactive DVD An interactive DVD is DVD software which includes multiple angles, multiple plot endings, etc.
43 ❐ This installation information is designed for professional installers with knowledge of automobile electrical safety systems and is not intended for non-technical, do-it-yourself individuals. It does not contain instructions on the electrical installation and avoidance of potential harm to air bag, anti-theft and ABS braking or other systems necessary to install this product.
(Continued) ❑ Installation Hardware (For Mounting) Item Diagram Qty Base Bracket YFG014C920ZC 2 e Hex. Nut (5 mmφ) YJN014C703ZA 4 r Mounting Bracket (L) YFX214C387ZA 1 t Mounting Bracket (R) YFX214C386ZA 1 y Double-Faced Adhesive Tape YFX9994C725ZA 2 46 V CB CB CB H (L) Angle V (90°) H AB AH C V V B C H AB V (R) C V V (R) AH V (L) (R) Selecting a mounting angle HA (0˚) BC Horizontal: H R V Limit to less than 10 degrees.
English Typical horizontal installation 1 Mount a mounting bracket (L) or (R) on either side of the control unit with a hex. bolt together with double washers (4 mmφx 8 mm). 2 Select a location where the unit should be mounted. Fix the base brackets with a double-faced adhesive tape. Cautions: • This unit is designed for use in a car having a 12 V negative ground battery system. • Be sure to insulate any exposed wires from a possible short-circuit from the car chassis.
(Continued) English Connecting the Parking Brake (Side Brake) Connection Lead Connection with DVD/monitor receiver (CQ-VD7001N) Connection with DVD/monitor receiver with CD/DVD changer control (option, CQ-VD7001N) Note: Refer to the operating instructions for the connected devices, in addition. Caution: For safety, be sure to ask your nearest professional installer to do this connection.
Electrical Connection (Continued) Connection with CD/Receiver with CD/DVD changer control (option, CQ-C9901N) Note: Refer to the operating instructions for the connected devices, in addition. 51 52 DVD Changer CX-DH801N Note: Never use both Remote-Ins (one is minipin jack, the other is RCA jack) at the same time. Failure to observe this may cause misoperation. HA RCA Cable (option) V C V B C HA M4X5mmMAX V.A.
Electrical Connection (Continued) Note on handling optical fiber cable: ¡Do not allow the cable to be damaged by getting it caught in the door, placing a heavy object on it, etc. ¡Make sure that the cable is not strained when it is connected. ¡Do not bend the cable sharply. ¡Install the DVD changer in where it prevents the optical fiber connector from hitting its surroundings.
Specifications 55 Digital audio output Power Supply Current Consumption Dimensions (W x H x D) DVD Changer Unit Disc Magazine Unit Weight DVD Changer Unit Disc Magazine Unit Disc Magazine Unit : 12 V DC (11 V – 16 V) test voltage 14.4 V, negative ground : Less than 2.0 A (at play mode) Disc : 231 x 73 x 168 mm : 121 x 35 x 128 mm : 1.5 kg : 0.2 kg : VYQ3174 (included) holds 8 discs : : : : : : : : : : More than 10 kΩ 2 V rms (1 kHz, 0 dB, at max.) 600 Ω 2 channels 5 – 20 000 Hz ±1 dB 95 dB 0.
