Owners Manual

Note

POWERFUL

FAN SPEED/

QUIET

• Can be selected at the same time.

• Can be activated in all modes.

• Can be cancelled by pressing the

respective button again.

• POWERFUL, QUIET and FAN SPEED

cannot be selected at the same time.

To set the timer

21 3

Select ON or OFF

timer

Example:

OFF at 22:00

• Each time pressed:

(exit setting)

2 Set the time

3 Confirm

• To cancel ON or OFF timer, press

to select respective or then

press

• If timer is cancelled manually or due to

power failure, you can restore the timer

again by pressing

or to select

respective

or then press .

• The nearest timer setting will be displayed

and will activate in sequence.

• Timer operation is based on the clock set

in the remote control and repeats daily

once set. For clock setting, please refer to

Quick Guide.

2 sets of ON and OFF timers are available to turn ON or OFF the unit at different preset time.

See "To learn more..." for details.

How to useEnglish

• When selected, the unit will circulate the air in High mode for monitoring the temperature.

When the sensor detects the temperature drops below 46 °F / 8 °C the compressor/heat

pump operation begins, when the temperature reaches 50 °F / 10 °C, the compressor stops

and repeat this cycle.

• For Wireless LAN Module operation setup, please refer to Setup Instructions Manual.

To select Room Freeze Protection

To connect network

RFP

ACXF55-27201_FC1219-1.indb 7 11/21/2019 3:03:56 PM